Boss Audio Systems BV9969NY User Manual

Download

Page 1

BLUETOOTH -ENABLED

FULL iPOD CONTROL

BUILT IN NAVIGATION

IN DASH DOUBLE DIN DVD /MP3/CD

AM/FM RECEIVER WITH 7.0

WIDESCREEN TOUCHSCREEN TFT

DIGITAL MONITOR

WITH USB AND SD MEMERY CARD PORT AND

FRONT PANEL AUX INPUT

RDS COMPATIBLE MODEL

BLUETOOTH -ENABLED FULL iPOD CONTROL BUILT IN NAVIGATION IN DASH DOUBLE DIN DVD /MP3/CD AM/FM RECEIVER WITH 7.0 WIDESCREEN TOUCHSCREEN TFT DIGITAL MONITOR WITH USB AND SD MEMERY CARD PORT AND FRONT PANEL AUX INPUT RDS COMPATIBLE MODEL

01.2013

Page 2

INSTRUCTIONS

DVD Parental control function：The default set for DVD is #8 adult, which means all grades of DVD can be read without entering password.To change the default grade,you need to follow the below procedure: Press SETUP button on the remote, display will show the system set up menu and the submenu,select password and enter 0000, you will be able to choose the DVD grade as default.

DVD Parental control function

INSTRUCTIONS

CONTENTS

Warning: To ensure safety while driving and to comply with laws, drivers should not

watch video or operate the video device while driving.

NOTE:

1. Please read the instructions before using the unit, the damage caused by not following the instructions will not enjoy the warranty.

2. To drive safely and avoid break the traffic rules, do not watch program and operate the unit while driving.

3. To avoid short circuit, please do not exposure the device to rain.

4. To avoid short circuit, please do not put in the device or any metal objects left behind.

5. Not open the machine for maintenance by yourself, please go to the professional repair service station for repairing.

6. When the engine is turned off, please do not use the car audio a long time, otherwise the battery may run out.

7. Do not insert anything to the device’s vent and other openings.

8. Damage to the screen carefully! Do not use sharp objects push, rub, Stroke the screen.

Panel Introduction

Basic Functions

Remote Control Function

Radio Function Operation

Disc Function Operation

13 14

External input operation

Counter function operation

Steering wheel setting

Music function operation

Other Function Operation

Turn on/off Host

Access main interface

Wallpaper and Logo setup

GPS Navigation Function Operation

BT Function Operation

Basic operation setup menu

Compass function operation

U Disc/SD Card function operation

Wiring

Diagram

Trouble shooting

Accessory

18 18

DVD Parental control function

Specitications

Access setup interface

General Settings

ACCESSORY

Accessory

Quantity

Wire

USB Cable

Keys

2PCS

1PC

Remote controller

Warranty card

1PC

2PCS

Page 3

INSTRUCTIONS INSTRUCTIONS

Panel Introduction

87.5-108MHz

87.5-107.9MHz

55dB

30dB

20-30dBuv

1.5%

522-1620KHz

530-1710KHz

32dB

70dB

20Hz-20KHz

FM tuner

European frequency range

USA frequency range

Signal / Noise ratio

Stereo separation

Search station volt

Distortion rate

AM tuner

European frequency range

USA frequency range

Limit noise sensitivity

DVD player

Signal / Noise ratio

Frequency response

DC 12V

10.8-16.0V DC

15A

Negative ground

85 WattsX4 Channels

Power supply

Power range

Max operate current

Ground system

Amp Rating

SPECITICATIONS

RESET

18 19

1 2 3

6 7 8

9 10 11 12 13

BASIC FUNCTION

1. /OPEN Button

Press the button to open / close the screen. Press this button for short moment to turn on power, and long press it to turn off power.

2. MODE Button

When the unit is power on, Repeat press this button can switch to different function mode as following picture. Note: When the device without connecting to USB、SD or DVD no disc inside, the system will automatically skip these related working mode.

3. MIC Input

BT MIC input.

4. REL Button

Press this button to release the panel.

5. MUTE Button

Press this button to shut off sound output, repress this button to resume sound output; Long press this button longer to turn on / off TFT LCD display.

Music

2/RPT 3/RDM

MODE

MUTE

Page 4

INSTRUCTIONS INSTRUCTIONS

TROUBLE SHOOTING

PROBLEM

CAUSE SOLUTION

After ignition switch off ,setting information all lose

Reset information and save

Change battery or fuse

Cannot power on

Change fuse same as the old one

Some factors cause MPU wrong operation

Press RES button on the panel by penpoint, then, power on

Poor performance of radio station

Cannot load disk

There is a disk inside

Remove disc before inserting another one

Weak signal

Move the car to another place, then research

Cannot play disc

Disc is scratched

Change new disc

Put wrong side of disc into the unit

Insert in the disk with sign side up

Clean lens by lens clean disc

Lens is dirty

Cannot switch language/subtitle

There is only one language/ subtitle in disc

If disc is not with multi-language/subtitle, it cannot switch language/subtitle

No image

Other factors cause MPU wrong operation

Press [RES] button on the panel by penpoint, then, power on

Cannot watch image during driving

It’s not allowed to watch image during driving

Park the car in a safe place, put the car stall in “ P ” postion, pull up the hand brake, parking brake wire must be grounded

Check fuse

6. (VOL/SEL) Volume adjustment mode

Repeat pressing this button can select the VOL、BAS、TRE、BAL、FAD adjustment mode, Then can rotate the button to adjust VOL、BAS、TRE、 BAL、 FAD as you like.

7. SEEK Knob / ( / )/ (SEEK+ / SEEK-)/ (SEEK / SEEK)(Speed forward / backward / Select station / song)

In radio mode, press / rotate the knob to select station upward / backward. Long press / rotate the knob to automatically scan station. In playback mode, short press / rotate the knob to select song upward / backward, long press / rotate it to achieve speed forward / backward function.

8. Number Button 1 /

In radio mode, press this button to hear radio preset; In disc playback mode, press this button for Play/Pause.

9. Number Button 2 / RPT (Repeat Playback)

In radio mode, press this button to hear radio preset; In disc playback mode, press this button to repeat the current track indefinitely.

10. Number Button 3 / RDM (Random playback)

In radio mode, press this button to hear radio preset; In disc playback mode, press this button to play frocks on the disc in random order.

11. Number Button 4 /

In radio mode, press this button to hear radio preset; In disc playback mode, press this button for to stop playback.

12. Number Button 5 /

In playback mode, press the button to adjust the angle of screen.

13. Number Button 6 /

In playback mode, press the button to adjust the angle of screen.

14. Dual (front and rear) AUX

To input external audio. Warning :You can only use either front or rear AUX at a time. Never connect both front and rear AUX at the same time.

15. Dual (front and rear) USB

Insert USB removable advice so as to read audio/video files. Warning :You can only use either front or rear USB at a time. Never connect both front and rear USB at the same time! This could cause malfunctions.

16. IR

To receive infrared signal from the remote control.

17.

When there is a disc in the unit, press the button to eject the disc.

18. SD

Insert SD card, the unit will play the files automatically.

19. RESET

Press this button and this unit will be restored to the initial state.

WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

● Yellow – 12 V Constant

● Black – Ground wire

● Blue - Power Antenna / Remote Amp Turn On

● Orange – Back-Up Camera Trigger (+)

● Pink – Parking Brake (-)

● White/White black - Left front speaker (+/-)

● Purple/Purple black - Right rear speaker (+/-)

● Green/Green black - Left rear speaker (+/-)

● Red - ACC ON (+12V)

● Grey/Grey black - Right front speaker (+/-)

Right rea r

PURPLE

GREEN

GREEN/BLACK

GREY/BLACK

Right fro nt

Connect to ignition key switch

Connect to Power Antenna or remote control for Amplifier

Orange

Connect to car reversing switch

CCD OFF

Pink

Braking wire

Memory +

Yello w

Connect to battery or +12V of Power Source that is always live

Ground -

Black

Connect to Ground terminal

Red

WHITE

WHITE/BLACK

Left front

GREY

Left rea r

PURPLE/BLACK

FUSE

Orange

Black

Brown

Light grey

Black

Light grey

Dark grey

Black

Light grey

Music

SWC wire

Radio antenna

Rear USB

F:GPS antenna

Page 5

REMOTE CONTROL FUNCTION

INSTRUCTIONS INSTRUCTIONS

POWER ON/OFF

MUTE

SOURCE

SEEK+ / SEEK-

VOL+ / VOL-

SEL

LOUD

BAND / P / N

LOC / RDM

STOP

PLAY / PAUSE

ST / PROG

O-10+

AMS / RPT

TITLE

AUDIO

GO TO

SUB TITLE

PBC

UP / DOWN / L / R ENTER

SLOW

ANGLE

SETUP

OSD

ZOOM

1.POWER

Press once to switch on, press again to switch off.

2. MUTE Button

Press once to turn off audio output, press again to resume volume level.

3. SOURCE Button

Press this button to change mode.

4. EQ Button

Press this button to choose POP、ROCK、 CLASSIC、EQ off.

5. SEEK+ ( )/ SEEK-( ) Button

Press this button to manual turning, sped or quick back, previous song and next song.

6. VOL+ ( ) / VOL- ( )

Press this button to increase or decrease volume level.

7. SEL Button

Press this button to choose sound feature.

8. LOUD Button

Press this button to startup LOUD function.

9. BAND-P/N Button

In radio mode, press this button to choose band. In VCD、DVD mode, press this button to choose 、 or NTSC system.

10. LOC/RDM Button

In radio mode, press this button to switch between local and direction. In VCD、CD mode,press this key to randomly play.

11. STOP Button

Press this button to stop playing.

12. PLAY/PAUSE Button

Press this button to switch between play and pause. In stop mode, press this button to play.

13. ST/PROG Button

In radio mode, press this button to choose stereo or mono station. In audio mode, it can help STOP button to programmed play.

PAL AUTO

NAVI

Step 1: Press the mode button in the unit to switch to DVD mode.

Page 6

INSTRUCTIONS INSTRUCTIONS

14. 0-10+ Button

Press this button to choose desired song section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button.

15. AMS / RPT Button

In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.

16. TITLE Button

In DVD mode, press this button to play back to the top menu of disc.

17. AUDIO Button

In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track、right track and stereo.

18. GO TO

In DVD mode, press this button, you can define playing time.

19. SUB TITLE Button

In DVD mode, press this button to switch language of subtitle.

20. PBC Button

In VCD mode, press this button to display all song menus, work with number button to choose songs.

21. UP、DOWN、LEFT、 RIGHT、ENTER Button

In DVD mode, press this button to move cursor up, down, left, right to choose item in menu, press the enter button to confirm choice.

22. SLOW Button

In audio mode, press this button to slow backward and slow forward.

、

Button

23. ANGLE Button

In DVD mode, press this button to change play angle.

24. SETUP Button

In audio mode, press this button to choose different set items.

25. OSD Display

Press this button to display the title chapter and the left time.

26. ZOOM Button

In DVD/VCD mode, press this button to ZOOM in.

27. MENU Button

Press button to back to the main menu.

28. NAVI Button

Press the button to enter/exit the navigation interface.

BATTERY CHANGE

When control distance of remote control becomes shorter or no function, please change battery. Please confirm polarity before change.

One hand press stopper, then pull out battery.

Put battery into controller.

Insert battery holder into controller.

General Settings

into the General set interface. (Password: 888888). General settings have been set at the factory.

In the set interface click [GENERAL] icon,

Regional radio

In the General Settings screen click [RADIO] icon to enter the Radio setting interface, as shown below:

Select your desired area.

Version Information

In the General Settings screen click [VERSION] icon to enter the Version Information interface, as shown below:

The version information is displayed please prevail in kind.

System setting

In the General Settings screen click [SYSTEM] icon to enter the System setting interface, as shown below:

You can choose the system settings interface has the feature is turned on or off.

Protocol settings

In the General Settings screen click [Car Set] icon to enter the agreement setting interface, as shown below:

You will need to set protocol, click the icon to confirm the save the settings.

T-V standard

In the General Settings screen click [T-V] icon to enter the T-V setting interface, as shown below:

You can choose to have the T-V set is turned on or off.

Slide up and down to select your preferred language mode.

Language setting

In the General Settings screen click [LANGUAGE] icon to enter the Language setting interface, as shown below:

Page 7

INSTRUCTIONS INSTRUCTIONS

Turn on/off Host

When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds , the host will turn off.

Access main interface

In boot-up state, press [ ] button on the panel to switch to main interface, as shown in below picture:

Touch in different interface style to switch between. Press and hold the hide icon hold to the left and right drag, you can hide the location

of the icon to the left or right.

3. Click the icon or gently with a touch pen or finger to the left and sliding screen to toggle the main menu page.

4. To reset the shortcuts with a touch pen or finger to hold down the icon to drag the icon to drag the icon to the shortcut bar to the bottom of the screen, move over the icon will replace the old icon. If you want to delete the shortcut icon, first press and hold the icon until the trash can icon and then drag to the trash.

5. The icon at the touch on the main interface to switch between day, night and off-screen three modes.

6. Touch the function icons so as to access the corresponding function operations.

7. Double-click the watch icon to enter the clock setting interface: Click the icon to select your favorite type of clock. Click the icon unlock unlocked drag minutes to set the time, set up and click again to icon to lock the clock.

Wallpaper and Logo Setup

Click on the main interface [wallpaper] icon into the wallpaper and boot screen settings interface, you can choose your favorite wallpaper and boot screen. Note: The start-up screen has been set at the factory.

Navigation setting

Navigation path has been set at the factory, please do not enter the navigation setup interface to change the path freely, otherwise the procedure many lead to abnormal navigation.

Audio setting

In the set interface click [AUDIO] icon, into the Audio set interface.

Click into sound effect default interface. Press into loudspeaker interface, click to adjust the channel of loudspeaker, touch to get back to initial setting.

BEEP: click that icon to switch on/off that. LOUD: click that icon to switch on/off that. GPS. MIX: click that icon to switch on/off that. EQ: click that icon to switch different mode.

Basic operation setup menu

Click on the main screen [Setup] icon, enter the setting interface. With a finger or touching pen to gently sliding screen can be set about switching interface.

Access setup interface

Video setting

In the set interface click [VIDEO] icon, into the video set interface.

Brightness: Drag icon can adjust video the screen brightness. Forbid play on run: Driving ban and click on play icon can open/close the function.

Time setting

Click the Settings interface Time setting icon, enter the Time settings screen,

as shown below:12h/24h interchangeable,

In the year, month, day, hour, sub-office slide up and down to the relevant settings. Zone is set to enter the time zone settings interface when clicked. Choose the time zone, click the icon to save your settings and exit the time setting interface.

SET COMM setting

In the set interface click [SET COMM] icon, into the Serial port set interface.

Choose good then click the icon to save your settings and exit the serial port settings interface.

Touch calibration

If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”. Click [CALIBRATION] icon on setup interface, click OK to pop up a [Do you want to calibration?] as shown below, click OK to confirm to access touch calibration interface:

Touching methods

Use touch pen to click the center of”+” icon, and move along with center of “+” icon so as to calibrate the screen, It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected.

Page 8

INSTRUCTIONS INSTRUCTIONS

Radio Function Operation

In tune

Among tall buildings At the boulevard The antenna is sheltered Underground parking Overpass or viaduct

GPS Navigation Function Operation

1. Navigation Function Operation For detailed operation of navigation function, see “Navigation Operation Manual”.

2. Receiving signal error

When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters. Driving on parallel sections, there shall be error even the product has auto-correct function. The normal receiving of satellite signals shall be affected and cause error in following environment:

3. Satellite receiver

Navigation system can keep receiving eight satellite signals. As a general rule, the navigation system can figure out your accurate location after received 3-4 satellite signals. But sometimes, weather and tall buildings in the city shall affect the signal receiving effect, as is shown in following figure:

1. Enter/exit

Touch [Radio] icon in the main interface to enter into the radio interface.

2. Operation stored radio

Each band can be stored six radio stations, radio stations can be stored directly click (P1-P6) choice, and will be displayed on the screen.

3. How to save radio stations Select a band, and then select a radio station. Press and hold button (P1-P6) to select the preset number will appear in the corresponding number button on the screen.

Touch [

5. Search/Save radio stations

Short touch the [ ] button, browse 1-6 sets of bits stored on the radio, Long touch the [ ] button to long-automatic station search, and the strongest radio signals P1-P6 are stored in the display position on the table.

6. Play radio station selection

Touch [ ] icon pop-up selection sets the keyboard input radio frequency selectable radio frequency spectrum or you can drag directly touch the icon to select a stored radio station.

Touch [ ] can enter icon spectrum interface. Double-click the spectrum can switch over the spectrum style.

Touch the

corresponding icon had no effect

Touch [ ] icon to return to main interface, and then touch other function icons so as to exit radio mode.

4. Band selection

] icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.

7. Other Functions

Touch [ ] icon to access sound setting interface. Touch [ ] icon so as to turn on/off loudness function.

Touch [ ] icon so as to turn on/off Long/Short-Range function. Touch [ ] icon to turn on/off stereo.

8. RDS Function

RDS function provides series information (such as traffice information, name of station) , and can automatically switch to the station with stronger signal and carries the same program.

AF: touch the button to turn on/off AF mode. TA: touch the button to turn on/off TA mode. PTY: touch the button the screen displays program types, users can search station

according to program type. NOTE: If the unit does not have RDS function, it has no AF/TA/PTY function,

Sliding around

Scope for receiving satellite signals

Angle of elvevation

Other function operation

Rear view function

In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.

Do not rely on CCD system completely, please make sure your car is safe by your eyes during driving.Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.

Reverse field simulation

Rearview backup image

Warning

Page 9

INSTRUCTIONS INSTRUCTIONS

00:00:09 00:04:48

Disc Function Operation

Play disc

Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play.

Eject disc

(1) Click button on the panel to eject the disc. (2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play. Do not insert two discs or more.

2. DVD/VCD disc playback

During playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to perform various playback controls.

After a CD is inserted, system shall access disk reading state immediately. When there is a disk in the device, click [Disk] at the main interface so as to access disk reading state. After the disk being read out, system shall automatically play in sequence.

4. MP3/JPEG/MPEG4 disk playing

When the disk contains readable files, such as MP3/JPEG/MPEG4 files, it shall be automatically read out and played after slipping into DVD player. During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for playing.

1. Play/eject disc

3. CD Disc Playback

5. Touch Menu Function Description

The disc read, touch area of the screen, pop-up touch menu. Operate a variety of playback controls the touch menu.

MUSIC function operation

Connect to Music first, touch [Music] icon on main interface to access Music interface, as shown in below diagram.

Click icon return to a interface

Short press next Song Long press fast forward playback/rewind playback

previous Song/

Sound settings

Play/Pause

Loudness on/off

Back to the previous directory

Page up/down

Number Button

Random play

cycle play

External input operation

Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack. Touch [AV-IN] icon on main interface to access external input interface. Click icon into the sound settings screen. Loudness on / off.

COMPASS

COUNTER

In the main interface touch [COUNTER] icon, into the counter interface.

function operation

In the main interface touch [COMPASS] icon, into a compass interface.

Steering wheel setting

Click the settings interface [STEER] icon into the steering wheel settings interface. Steering steps: The original line of control of the vehicle side, the positive, the negative and machine side control line cathode, anode connection after connection: ① Touch [Reset] and press above the steering wheel buttons one by one, and record the appropriate sequence and function, touch [allocation]. The steering wheel buttons

② Touch the desired distribution voltage value (such as: 2.00V). ③ select the appropriate settings (such as: volume +). ④ completed the steering wheel buttons will display the corresponding function. ⑤ After completing the settings, touch [OK] to save the settings. ⑥ For the reset function, can touch [Reset] (the original settings will all be cleared), and repeat Step ② ~ Step ④ for resetting. ⑦ You can also choose to set a good model of the steering wheel.

Click the models select] icon pop-up model selection interface, select your car type click OK icon to save the settings.

Page 10

INSTRUCTIONS INSTRUCTIONS

PIC 2PIC 1

PIC 3

PIC 4

Previous song

PLAY/PAUSE

next song

Forward/Backward play

Click the button, forward/backward play.

The previous/next song

The previous/next songClick the button, .

Channel conversion

Click Switchable channel the button, .

Back to Root Menu

Click the button the DVD state can return to the root menu of the disc, VCD state can enter the PBC menu and playback.

Access title menu Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing.

During VCD playing, this function only works when PBC is off.

Repeat play In playing state, touch this button to start repeat play function: Chapter repeat → Title repeat → Entire disc repeat →Off.

Language Selection Touch the button, can switch subtitle language.

Note: the need to support the subtitle language discs have this feature

Number Button Click the button, pop-up numeric keypad. By click the numeric keypad for direct selections played.

U Disc/SD Card function operation

When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card.

Insert/Eject USB storage device

1. Connect a U disc recorded with media information to the unit by a USB connecting cable.

2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.

Insert/eject SD card

1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.

Enter/exit

Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; Touch [SD] icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls.

When pulling out the SD card, exit SD card playing state first, then press the SD card

and it shall pop up after unlocking.

Play

After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.

Random play

Scanning

Forward/Backward play

The next page menu

Play/Pause

Stop

The previous/next song

Volume button

Number Button

Repeat play

Back to Root Menu

Access title menu

Zoom in/out

Channel conversion Language Selection

BT Function Operation

1. Enter/exit

Touch [BT] icon in the main interface to enter the BT interface, Touch icon to exit BT interface.

2. Pair/link

BT BT

BT BT BT

as PIC 1:

In the BT interface of click to access call records interface as PIC 2:

5. Phone book

After the cellphone gets connected to the unit, you can read records in the phonebook of your cellphone and store information in the phonebook of the unit. In the BT interface of click to access Phonebook interface as PIC 3: Touch icon in the phonebook interface, the unit will automatically download phone numbers and put them in order.

6. BT Music

In the BT interface of click to access BT music interface as PIC 4:

To use hand-free function, make connection first, i.e. match the host with the mobile phone.

Operation methods:

Set the host to be matching state, and open the of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the when it has searched the device. Input password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device, please select [Yes]. Phone and shall automatically connect within 20 seconds. Under any working mode, the host shall convert to state if there is an incoming call. And the host shall restore to current mode after hanging up.

When the device matches with this device, the connection status shall display , otherwise, it shall display .

3. Dialing

You can dial on mobile phone directly or input phone number through the number buttons on the screen, click to delete if there is input error. After input the phone number, click to make a call.

4. Call records

Dialed numbers: Touch this button to check all the dialed phone numbers. Received calls: Touch this button to check all the phone numbers of received calls. Missed calls: Touch this button to check all the phone numbers of missed calls. Delete: Touch the button to delete a selected record. All Delete: Touch the button to delete all information in phone book.