CONTENTS
BV9200 User’s Manual - Contents
U S E R ’ S M A N U A L
2 General and safety precautions
3 Features
3 What is included?
4 Front panel controls
6 Remote control features
8 Remote control battery replacement
9 Video quality settings
9 DVD or CD changer control
10 Setup menu structure
System wiring:
11 Speaker connections
12 Audio connections in amplified system
13 Power and antenna connections
14 Connections to multi-disc changer
14 Basic operations
15 Auxiliary video input connections
16 Auxiliary video output connections
16 TV antenna connections
17 Troubleshooting
20 Specifications
Congratulations on your purchase
of a Multi-media Receiver
with Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
listening pleasure.
Thank you for making your
choice for car audio entertainment!
BV9200
In-Dash Double-DIN
DVD/MP3/CD AM/FM Receiver
with 6.5” TFT Monitor
and Built-in TV Tuner
page
Features What is included?
BV9200 User’s Manual - page 2
General precautions
Safety precautions
Notes on using this product
This device complies with Part 15 of the FCC rules.
Operation is subject the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesireable
operation.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate this device.
This disc player is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc. If the Region number
described on the DVD does not correspond to the
Region number of the player, the disc will not play
properly.
Should this unit fail to operate properly, please return
the unit to your authorized dealer.
Before installing and using your new
BME component, please become
familiar with all the information
contained in this manual.
Please keep this manual in a safe place
for future reference.
• This disc player is a Class 1 Laser
Product. It uses a visible/invisible laser
beam that could cause hazardous
radiation if exposed directly to the
consumer. Use of controls,
adjustments, or procedures other than
those specified in this manual may
result in hazardous radiation exposure.
• Do not open or attempt to repair
this unit yourself. Refer any repairs to
a qualified service technician.
• Be sure that the volume level of the
player does not interfere with the
driver’s hearing. The driver must be
aware and be able to react to sound
outside the vehicle.
• This product should not be used
with an installed video screen which
is visible to the driver of the vehicle.
• In some states and countries, the
viewing of images on a screeen inside
a vehicle is illegal, even by people
other than the driver. Be sure that the
installation and operation of this
system is in compliance with local
rules and regulations.
SHOCK HAZARD! Do not open the
case of this product. There are
dangerous voltages present within the
unit. There are no user-serviceable
parts within the unit.
Moisture on pick-up lens
Operating precautions
In humid climates, moisture may
condense or even freeze on the pickup lens which reads the data from
your disc. This may cause temporary
failure of the player.
Should this occur, turn the player on
without a disc, and leave it on for a
while. The unit will warm up and the
moisture will evaporate. In freezing
weather, this may take 1-2 hours.
Turn the unit off when it is not in use.
Do not switch the player between ON
and OFF rapidly. Please wait about
10 seconds between turning the unit
ON after turning it OFF, and vice versa.
Do not use broken, scratched, dusty,
oily or warped discs in the player.
Do not attempt to insert anything other
than 12 cm (4-3/4”) diameter discs in
the player.
Features What is included?
BV9200 User’s Manual - page 3
This DVD player features the following:
• Multiformat compatibility:
DVD, Video-CD, CD, CDR and MP3
•Motorized, slide-down touchscreen TFT 6.5-inch display
•B uilt-in TV Tuner (NTSC only)
•PL L-synthesized AF/FM tuner
with 30 station presets
• Parental programming lock
• Slow- and fast-motion playback
• Switch between different audio
tracks on DVDs (if available on disc)
• Multiple language subtitles
(if available on disc)
• Multiple viewing angles
(if available on disc)
When first unpacking your new
BV9200, please check first that the
package contains all of the items
below. If something is missing, contact
the store where you purchased it.
• BV9200 Multi-media disc receiver
• Remote control
• Battery (for remote)
Front Panel Controls
BV9200 User’s Manual - page 4
AS/PS (Auto Program Seek)
This menu is used in the Radio mode for
setting up station presets. You can do this
in one of two ways:
To automatically seek and store presets,
press and hold this button for more than
3 seconds. The radio will begin scanning
and will store the strongest stations and
assign preset buttons to them.
To audition and store presets, press this
button. The radio will scan for each station
and play it for about 7 seconds. If you like
a station and wish to save it as a preset,
press the AS/PS button. It will save the
station and then scan to the next one for
you to audition. Continue until you are
satisfied with your selections.
5
POWER
Press POWER to turn unit ON. Press
again to turn it OFF.
7
MUTE
Press this button to switch off the audio
during playback. Press again to restore the
audio.
To dim or turn off the display in
Radio mode: Press and hold this button
for 3 seconds to dim it. Press and again for
3 seconds to turn off the display. Press and
hold again to turn it back on.
To turn off the display in
TV, DVD, CDC or AUX IN mode, press and
hold this button for 3 seconds to turn. Press
and hold again to turn it back on.
6
VOLUME • UP/DOWN BUTTONS
In normal operation, these two buttons
serve as Volume Up and Volume Down
buttons.
If the SELECT button has been pushed
(to access such items as Bass, Treble,
etc.), these buttons are used to increase
or decrease settings for the particular
parameter you which to change.
3
SELECT
To set up tone and volume level options,
press this button repeatedly to change
various settings:
VOLUME > BASS > TREBLE > BAL >
FADER > EQ > VOLUME
Use the UP/DOWN buttons to make any
changes or adjustments.
To set up picture quality options, press
and hold this button for 3-5 seconds. A
display with these options will open. Press
SELECT repeatedly until the item you wish
to change has been highlighted, and then
use the UP or DOWN button to change
the setting. A picture of the picture options
is show on page 9.
4
MODE
Press this button repeat to change the
audio or A/V source in the following order:
RADIO > TV > DVD > CDC > AUX IN
2
EJECT BUTTON
During play mode, pressing this button
will cause the disc to eject. If you do not
remove the disc within 10 minutes, the
disc will reload (to protect the disc).
1
3
4
5
6
7
8
12
13
14
15
2
11
10
9
1
4
CH
X
MODE
BV9200
MULTI-MED IA DISC PLAYER
WITH
6.5-INC H WIDE SCREEN TFT MONITOR
INTRO
2
RPT
3
1
BAND
RDM
4
PAL/
NTSC
5
AS/PS
MUTE
POWER
SELECT
L/R
6
CDC
VOLUME
80
W
BV9200 User’s Manual - page 5
PLAY/PAUSE
Press of this button to begin playback of
the disc. A second short press will pause
the playback.
8
SEEK (>>I and I<<)
These buttons are used in both the Radio
and DVD modes.
In Radio mode, press and hold these
buttons for 3 seconds to make the receiver
scan until it finds the next strong station
on the dial. To tune a station manual,
press and release quickly to move up one
frequency step at a time until you reach
a desired station.
11
INTRO SCAN
In Radio/TV mode, pressing this button
will cause the unit to begin scanning for
strong stations. It will stop at the first
station for 5 seconds. and then scan to
the next station, and so on. To stop at a
desired station, press the Scan button
again.
In CD mode, pressing this button will cause
the unit to play the first 10 seconds of
each track on the disc. To stop at a desired
station, press the Play/Pause button.
9
NOTE: This function is not available in
DVD/MP3 Mode.
REPEAT
Use this button to select a repeat playback
mode. Press repeatedly until you have
selected the repeat mode desired.
The choices vary depending on the type
of disc you are playing:
DVD Playback modes:
REPEAT CHAPTER > REPEAT TITLE >
REPEAT ALL > REPEAT CANCEL
CD/VCD Playback modes:
REPEAT SONG > REPEAT ALL >
REPEAT CANCEL
MP3 Playback modes:
REPEAT SONG > REPEAT SPECIAL >
REPEAT ALL > REPEAT CANCEL
10
BAND
In Radio mode, a SHORT press of these
buttons will cause the unit to advance
among the bands available in the
following sequence:
FM1 > FM2 > FM3 > AM1 > AM2 > FM1
12
RANDOM (LOC/RANDOM)
In Radio mode, this button is used to
select between Local (LOC) and Distant
radio reception modes.
In DVD, VCD, CD or MP3 modes,
pressing this button will cause the
tracks or titles on the disc to play in
random order.
13
PAL/NTSC
In DVD/VCD mode, a SHORT press of
these buttons will cause the unit to
advance to through the different video
output modes in this sequence:
AUTO SELECT > PAL > NTSC
14
L/R (Soundtrack options)
In VCD and CD mode, a SHORT press
of this button will cause the unit to
advance to through the different audio
output modes in this sequence:
LEFT SOUNDTRACK >
RIGHT SOUND TRACK >
THREE DIMENSIONAL SOUNDTRACK
In DVD mode, a SHORT press of this
button will cause the unit to advance
to display and advance through the
different soundtrack options available
on the particular disc you are watching.
15
SEEK (>>I and I<<), continued
In DVD, CD or MP3 mode, a SHORT press
of these buttons will cause the unit to
advance to the next or last track (or
chapter) of the disc.
A LONG press of the button in DVD mode
will cause the player to seek forward or
backwards on the disc at a higher rate of
speed. The first press will make the unit
seek at 2X speed. Additional pressing of
the button will yield seek speeds of 4X,
8X, and 32X (press again and seek speed
returns to normal playback).
11
Remote Control
BV9200 User’s Manual - page 6 BV9200 User’s Manual - page 7
16
POWER
Press POWER to turn unit ON. Press
again to turn it OFF.
1
VOLUME UP/DOWN
Use these buttons to adjust volume
to desired level.
7
1
5
3
2 3 4
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
MUTE
Press this button to switch off the audio
during playback. Press again to restore
the audio.
To dim or turn off the display in
Radio mode: Press and hold this button
for 3 seconds to dim it. Press and again
for 3 seconds to turn off the display.
Press and hold again to turn it back on.
To turn off the display in
TV, DVD, CDC or AUX IN mode, press
and hold this button for 3 seconds to
turn. Press and hold again to turn it
back on.
2
DSP (Time Display)
Press this button to display the current
time of day.
3
SOURCE
Press this button to display the current
time of day (Note: The BV9200 will only
display time in 24 hour clock mode).
4
EQ
Pressing this button permits you to
choose one of the three preset equalizer
curves. Choose from POP, CLASSIC or
ROCK modes.
5
SEEK (>>I and I<<)
These buttons are used in both the
Radio and DVD modes.
In Radio mode, press and hold these
buttons for 3 seconds to make the
receiver scan until it finds the next
strong station on the dial. To tune a
station manual, press and release
quickly to move up one frequency step
at a time until you reach a desired
station.
In DVD, CD or MP3 mode, a SHORT
press of these buttons will cause the
unit to advance to the next or last track
(or chapter) of the disc.
6
SEEK (>>I and I<<), continued
A LONG press of the button in DVD
mode will cause the player to seek
forward or backwards on the disc at a
higher rate of speed. The first press will
make the unit seek at 2X speed.
Additional pressing of the button will
yield seek speeds of 4X, 8X, and 32X
(press again and seek speed returns to
normal playback).
6
SELECT
This button is used to enter and
confirm settings and selections made
when using the on-screen display.
8
0-9 NUMBER KEYS
Use these buttons for entering
numerical information for various
items in the on-screen menus.
9
PWR MUTE DSP
SOURCE
EQ
SEEK+
LOUD BAND
P/N
VOL– SEL VOL+ LOC
RDM
0
SEEK–
10+
ST
PROG
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO6PQRS
7
TUV
8
WXYZ9SPACE
GO TO
AMS
RPT
TITLE AUDIO SUB-T
PBC SLOW ANGLE
ENTER SETUP
OSD ZOOM
Loading...