Boss Audio Systems BV8728B User Manual

User’s Manual page-1

DVD/VCD/CD/MP3/MPEG4 operations

RDS (Radio data system) operations

DVD setup

Bluetooth Hands-free Function

BV8728B

3

Safety information

CAUTION:

WARNING:

Region Management Information

DISC NOTES

Handling and Cleaning

Disc Cleaning

This mobile DVD player is a Class 1 laser product. However, this mobile DVD player uses a
visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure
to operate the mobile DVD player correctly as described in this manual.

Use of controls or adjustments or performance of procedures other than those specified may
result in hazardous radiation exposure.

Do not open covers and do not attempt to repair this product yourself. Refer servicing to
qualified personnel.

- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

- To reduce the risk of fire or electric shock, and annoying interference, use only the
recommended accessories.

- This device is intended for continuous operation.

This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.

This mobile DVD Player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc
does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player
cannot play this disc.

You can playback the following discs:
DVD VIDEO/DVD AUDIO
VIDEO CD/AUDIO CD
MP3/WMA/JPEG/MPEG4

- Dirt, dust, scratches and warped discs will prevent proper operation.

- Do not place stickers or make scratches on discs.

- Do not bend discs.

- A disc should always be kept in its case when not in use to prevent damage.

- Do not place discs in the following places:

1. Direct sunlight.

2. Dirty, dusty and damp areas.

3. Near car heaters.

4. On the seats or dashboard.

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly
moistened with isopropyl (rubbing) alcohol. Never use solvents such as benzene, thinner or
conventional record cleaners as they may mar the surface of the disc.

User’s Manual page 2-

Preparing new discs with rough spots

Notes:

DIN mounting options

Remove transit screws before installation

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is
used, the disc will not be properly seated and the player will not play the disc. Therefore, remove
the rough edges in advance by using a ballpoint pen or pencil as shown on the right. Press the
side of the pen or pencil against the inside and outside edges of the disc.

- Choose a mounting location where the unit will not distract the driver.

- Before the installation of the unit, connect the wiring temporarily and make sure it is all

connected properly and the unit and the system works.

- Use only the parts included with the unit to ensure proper installation. The use of unauthorized

parts can cause malfunctions.

- Consult with your dealer if installation requires the drilling of holes or other modifications of the

vehicle.

- Install the unit where it does not get in the driver’s way and cannot injure the passenger if there

is a sudden stop, like an emergency stop.

- If installation angle exceeds 30° from horizontal, the unit may not perform properly.

- Avoid installing the unit where it will be subject to high temperature, such as from direct

sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive
vibration.

This unit can be installed either from the ‘Front’ (conventional DIN Front-mount) or the ‘Rear’
(DIN Rear-mount installation using the threaded holes on the sides of the chassis). For details,
refer to the following illustrated installation methods.

Before installing the unit, please remove the two transit screws.

Installation

User’s Manual page 3-

1. DIN front-mount (method A)

Installation opening

Installing the unit

RELEASE

This unit can be installed in any dashboard opening with dimensions as shown below:

Be sure to test all connections first, then follow these steps to install the unit.

1. Make sure the ignition is turned off. Disconnect the cable from the vehicle battery negative (-)

terminal.

2. Disconnect the wire harness and the antenna.

3. Press the ( ) on the front panel and remove the control panel (for details, refer to

‘Using the Detachable Front Panel’).

4. Lift the top of the outer trim ring. Then pull it out to remove it.

5. The two supplied keys release tabs inside the unit’s sleeve so you can remove it. Insert the

keys as far as they will go (with the notches facing up) into the appropriate slots at the center
of the left and right sides of the unit. Then slide the sleeve off the back of the unit.

6. Mount the sleeve by inserting it into the opening of the dashboard and bend open the tabs

located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so
examine the opening to determine which tabs will be most effective. Bend open the
appropriate tabs behind the dashboard to secure the sleeve in place.

7. Reconnect the wire harness and the antenna, being careful not to pinch any wires or cables.

8. Slide the unit into the sleeve until it locks into place.

9. To further secure the unit, use the supplied metal strap to secure the back of the unit in place.

Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the
strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your
vehicle’s mounting surface. Then use the supplied hardware (Tapping Screw (5x25mm) and
Plain Washer) to attach the other end of the metal strap to a solid metal part of the vehicle
under the dashboard. This strap also helps ensure proper electrical grounding of the unit.

(182 mm)

(53 mm)

7

3

/

1

6

”

2

3

/

32

”

Notch

User’s Manual page 4-

10. Reconnect the cable to the vehicle battery’s negative (-) terminal. Then replace the outer

trim ring and install the unit’s front panel (see the steps of ‘to install the front panel’).

1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery

negative (-) terminal.

2. Remove the metal strap attached to the back of the unit (if present).

3. Press the release button to remove the front panel.

4. Lift the top of the outer trim ring then pull it out to remove it.

5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit then

pull the unit out of the dashboard.

If your vehicle is a Nissan or Toyota, follow these mounting instructions: Use the screw holes
marked T (Toyota) or N (Nissan) located on both sides of the unit to fasten the unit to the factory
radio mounting brackets supplied with your car.

Fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with
the screw holes on the unit, and then tighten the screws (5x5mm) on each side.
Note: The outer trim ring, sleeve and the metal strap are not used for method B installation.

Removing the unit

2. DIN rear-mount (method B)

Left hand side

Right hand side

5mmMAX

N

TN

T

5mmMAX

N/T

NT

T

User’s Manual page 5-

Using the detachable front panel

Removing the detachable front panel

The front panel of the unit may be removed as a theft deterrent. After removing the front
panel, use the case provided to prevent the front panel from getting damaged.

1. Press the ( ) button to open the front panel.

2.

3. Store the front panel in its protective case.

Hold the right side of the front panel with the plate facing forwards.
First attach the right side of the front panel to the unit by inserting it into the right notch.

RELEASE

Attaching the front panel

Then push the left side of the front panel inwards to fix it in the right place.

Many vehicles are fitted with ISO connectors behind the dashboard, which makes it
easier to connect your car radio.
These connections can be found in the dashboard where the car radio will be fitted. Use
these cables to connect the car radio.
Should your car not be fitted with these ISO connectors, we strongly advise you to
consult your car dealer or a specialist to obtain the right adaptor. Once you have these
cables, you will need to connect your loudspeakers and the power supply to the
ISO connector, following the connection instructions below.

Wiring diagram

NOTE:

INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.
The manufacturer cannot be held responsible in the event of a malfunction if the
connections are not made properly.

Pull off the front panel.

Be sure it is

fully inserted. If not, the display or some of the keys may not function properly.

front panel

protective case

REL button

User’s Manual page 6-

ISO connector:
Part A:
A1:
A2:
A3:
A4:
A5:
A6:
A7:
A8:

Part B:
B1:
B2:
B3:
B4:
B5:
B6:
B7:
B8:

No Connect
No Connect
No Connect
Battery B+ (Yellow)
Antenna (Blue)
No Connect
Accessory (Red)
Ground B- (Black)

Rear Right + (Violet)
Rear Right - (Violet/Black)
FrontRight+(Grey)
Front Right - (Grey/Black)
Front Left + (White)
Front Left - (White/Black)
Rear Left + (Green)
Rear Left - (Green/Black)

ISO CONNECTOR

MEMORY B+ (YELLOW)

ACC B+ (RED)

POWER B+ FOR
RADIO ANTENNA ( )BLUE

GROUND B- (BLACK)

Radio Antenna Socket

PARKING BRAKE WIRE B
()

-

PINK/BLACK

Subwoofer output
Socket (Green)

Coaxial digital audio output
Socket (Orange)

RCA connector to front left
output (White)

RCA connector to front right
output (Red)

RCA connector to rear right output (Red)

RCA connector to rear left output (White)

Video output socket 1 (Yellow)

Video output socket 2 (Yellow)

FUSE 15A

WHITE

WHITE / BLACK

GREEN

GREEN / BLACK

VIOLET

VIOLET / BLACK

GREY

GREY / BLACK

FRONT

4 ohm

LEFT

SPEAKER

REAR
4 ohm

RIGHT

SPEAKER

FRONT
4 ohm

REAR
4 ohm

Video input To car rear view
camera (Yellow)

REVERSING CAMERA
ACTIVAION WIRE B+ (PINK)

15

User’s Manual page 7-

User’s Manual page 8-

WATCHING THE VIDEO MONITOR IS FORBIDDEN WHILE DRIVING:

Connecting the Parking Brake line to the parking brake system built in the car

The “PARKING BRAKE” wire must be connected to the parking brake system of your car. The
LCD screen will display video images ONLY when the parking brake is engaged.

If the parking brake is not engaged, the screen will display the message “DISABLED WHILE
DRIVING”. This is a safety feature designed to prevent the driver from watching a video while
driving. The video output of this unit is not affected by this.

Note: In Radio Mode or CD/MP3 Mode images will be displayed on the monitor whether or not
the parking brake is engaged.

Connecting the reversing line to taillight on the car

Taillight

To Car Battery

To reversing line

To taillight

Taillight line

After connecting, at power on state, when you start up the reverse gear, the unit will
receive the picture from car rear view camera.

Parking Brake

Parking Brake switch

(Inside the car)

Parking Brake line (Pink/Black)

To metallic body or chassis of your car

Car Battery

Parking brake
indicator Light

1.

- Turn the unit on by pressing any button except the (Release) button.
When the unit is switched on, press and hold down the button to go to standby mode.

- Press the ( ) button to shut off the sound output.
Press it again to resume previous sound level.

2

Flashes when the front panel is removed.

3.
Press the button to display the main menu (or root
menu). Then you can access all the features (Such as
RADIO, BT, DISC, SD, USB,AV IN.) by tapping on
the touch screen icons. Touch an icon to select a
source. Touch the icon “ ” icon to exit the menu and
return to the previous mode. : The GPS, AV2, and
TV(MTV)function are not available for this unit.

4.
Adjust the volume by pressing the button.

Turning the unit on/off

Mute on/off: MUTE

ANTI-THEFT LED indicator

Select source

SRC

Note

Sound adjustment

VOL + /VOL -

.

X

User’s Manual page 9-

Car radio
after sliding down the front panel after removing the front panel

12

10213

+

-

6

8

3

5

11

1

79

4

Operations

Features and controls
Front panel

BV8728B

SRC

VOL

VOL

IR window

LCD display

AV IN

SRC

5. To receive the infrared signal from the remote control.

6.

7.

11.
Connect the AV cable (supplied) to your external AV device by the audio/video input

3.5mm jack on the front panel, then press the button to switch to AV mode.

Remove the front panel and use a pointed object to press the RESET button to restore
the factory settings when the unit or display is not working properly.

:

Press this button to slide down the front panel and eject a disc when it is loaded into the
unit.

8.

Press this button to open the front panel.

9.

10. (For MP3/WMA/MPEG4/JPEG file playing)

12.

13.

[]RELEASE

USB port

SD Slot

Disc Loading Slot

Reset the unit

Using the remote control

1. POWER, MUTE

2. MODE

3. DISP

4. A-B

5. SETUP, BT MENU

6.▲/▼/◄/►/ENTER

7. TITLE/PBC

8. ,ANGLE

9. / (-TUNING+)

10. VOL-/VOL+

11. PTY (program type)

12. RPT (repeat)

13. Preset stations buttons (1-6),
Number buttons (0-9)

14. GOTO/AS/PS (go to/scan stations to memory/

automatic station store)

15. TA (traffic announcement)

16.

17. AF/REG (alternative frequencies/
regional mode)

18. DVD MENU

19.

20. , DEL (Delete)

21.

22. PROG/LO/DX

23. SUB-T(subtitles)

24. RDM/MO/ST (random/mono or stereo select)

25. BAND 0/+

26. AUDIO (audio language)

27. ZOOM

28. / , /

/

User’s Manual page 0-1

18

17

27

16

19

20

21

22

23

24

25

26

28

12

14

1

2

3

15

5

4

6

7

8

9

10

11

13

Installing the battery

Open the tray at the back of the remote control and insert the battery with the polarity (+)
on top as shown.

1

2

Use and care of the remote control

Point the remote control at the infrared window on the front panel.
Notes:
Using the battery incorrectly can cause malfunctions. Take note of the following points
for the remote control:
* Remove the insulating tape before using the first time.
* Keep the battery out of the reach of children. Should the battery be swallowed,
immediately consult a doctor.
* Use one CR2025 (3V) lithium battery
* Remove the battery if the remote control is not to be used for a month or longer.

.

1
Press to turn on or off the unit.
Press to shut off the sound output. Press it again to resume previous sound level.

2
Press this button to select one of the following modes: RADIO, BT, DISC, SD, USB, AV
IN. : The GPS, AV2, and TV(MTV) function are not available for this unit.

3
Press the DISP button to display the playback information.

4
In DVD and VCD mode, press to repeat a specific section on a disc.

5
In DVD playback mode, press to display system SETUP menu, you can adjust the
settings to your preference.
In bluetooth mode, press and hold the BT MENU button to access the bluetooth menu.

6 [▲/▼/◄/►]

[up/down/ left/right] and then press ENTER to access the selected item or confirm the

selection in the system setting menu.

7
In DVD playback mode, press the button to display the title menu.
For VCD, press this button to turn on PBC ON. The disc menu (if available) will display
and then use the NUMBER button (0-9) to select the options in the menu.

8
During bluetooth mode, press this button to hang up the call.
Press to change the camera angle in DVD mode (Available only when it was shot at
different camera angles).

9/
In radio mode, press one of these buttons to seek a station automatically.
In DVD/USB/CARD mode press these buttons to select the previous or next file.

POWER, MUTE

MODE

Note

DISP

A/B

SETUP, BT MENU

ENTER

TITLE/PBC

, ANGLE

(-TUNING+)

User’s Manual page 1-1

10
Press to adjust the volume.

11
In radio mode, press to turn the PTY function on/off.

12
In DVD/USB/CARD mode, press repeatedly to select repeat playback mode.

13 ( )
In radio mode, press and hold this button to store a preset station, press this button
briefly to recall a preset station. Press to select track, chapter or preset stations.

14
In DVD mode, press the GOTO button and the cursors to highlight one of the following
options: TT (title), CH (chapter), TRACK or a specific time (clock icon). Use the number
buttons to input a desired item and then press the ENTER button to confirm.
In VCD/CD/MP3 mode, press the GOTO button and the cursors to select one of the
following options: TRACK or a specific time (clock icon).
Note: GOTO function may not work for some discs such as MP3 discs, which have
different burning conditions.

15
In radio mode, press to turn the TA function on/off .

16
During bluetooth mode, press this button to dial or aceept the an incoming call.

17
In radio mode, press to turn the AF function on/off. Hold down the button to turn the REG
(regional) function on/off.

18
In DVD mode, press the button on the remote control to access DVD’s menu.

19
Press to slide down the front panel and eject a disc when it is loaded into the unit.

20 , DEL (Delete)
Press to stop the playback.
During bluetooth mode, press this button to delete the incorrect number.

21
Press to start, pause or resume playback.

22
In radio mode, press briefly to select “LOC” - local stations or long distance stations. In
DVDVCD/CD mode, press this button to set program playback.

23
In DVD playback mode, press this button to change the subtitle language.

24
In DVD/VCD/CD mode, press this button to play the tracks/chapters in random order. In
radio mode, press this button to select STEREO or MONO reception.

VOL-/VOL+

PTY

RPT

Preset stations buttons (1-6), Number buttons 0-9

GOTO/AS/PS (go to/scan stations to memory/automatic station store)

TA

AF/REG

MENU

MENU

PROG/LO/DX

SUB-T (subtitles)

RDM/MO/ST

/

User’s Manual page-12

Main menu

System tools setup

AUDIO setup

Touch the button on the front panel or t

to display the main menu
(or root menu). Then you can access all the features
(Such as RADIO, BT, DISC, SD, USB, AV IN.) by
tapping on the touch screen icons. Touch an icon to
select a source or the icon “ ” icon to exit the menu
and return to the previous mode. : The GPS,AV2
and TV(MTV) function are not available for this unit.

“ ” on the touch screen

- + / on the touch screen

Fader: R15-R-F-F15
EQ: FLAT, CLASSIC,POP, ROCK.
Loud (loudness): on/off
Sub.W(Subwoofer): 0(off)-12

SRC

Note

ouch the

“ ” icon on the touch screen

Touch the icon to display the
system tools setup menu.
Touch an icon to adjust a setting: AUDIO/ PICTURE/
SYSTEM/DVD SETUP.
Use the , or icons to adjust
the setting and “I, II” to access a page.
After setting, touch the icon to return to the previous
Menu or “ ” to exit the setup menu.

Volume:0-63
Bass: -7-0-7
Treble: -7-0-7
Balance: L15-L-R-R15

Using the touch screen

X

25
In radio mode, press the button to select bands.

26
In DVD mode, press this button to select the audio language.
In VCD mode, press to select one of the following audio outputs: MONO LEFT, MONO
RIGHT, MIX MONO or STEREO.

27
Press to enlarge or reduce the picture size.
Press to return to the previous menu in the menu (AUDIO/PICTURE/SETUP) mode.

28 , /
Fast backward/ Fast forward in playback mode.
During bluetooth mode, press this button to input or .

BAND

AUDIO (audio language)

ZOOM

/

X

User’s Manual page 3-1

PICTURE setup

SYSTEM setup

Note

TIME

TOUCH

DVD SETUP

ENTER

Note: The PICTURE settings apply to the video display
Only and have no effect in tuner mode.
Touch the , icon to select a setting: BRIGHT
(Brightness), CONTRAST, COLOR or TINT.
These different options can be adjusted on a scale from
0to63.

Touch an icon to select a setting:
TIME/TOUCH.

: The “Dual zone”, “Light”, “SW” and “Other”

function are not available for this unit.

Time: Time display on/off
Time.M: 12/24 hour display mode
Hour: Adjust hours
Minute: Adjust minutes

You can calibrate the touch screen if necessary.
When the target “+” moves to another position, tap and
hold at the center.
Repeat four times to complete the calibration process.
When completed, tap anywhere on the screen to save
The setting and go back to menu screen.

Touch the cursor icons
to select a setting and use the “OK” icon to confirm.
Alternatively, you can use the cursors and

buttonontheremotecontroltosettheDVD
setup.
Please refer to the “DVD SETUP” section for more
details.

(▲/▼/◄/►) on the touch screen

(▲/▼/◄/►)

User’s Manual page 14-

Listening to the radio

SRC

BAND

BAND

Tuning

Seek tuning

BAND

Manual tuning

BAND

Auto store

BAND

AS/PS

AS/PS

Manual store

Recalling a preset station

Stereo/Mono

MO/ST

Local/Distant

LO/DX

1. Touch the (SOURCE) button o

to select the radio mode.

2. Press the button on the remote control
repeatedly to select the radio band in the following
sequence:

Press and hold the button on the remote control to switch between EUR01
(Europe frequency) and USA2 (USA frequency).

3. Press the [ / ] buttons on the remote control to tune in a station automatically.

There are 3 types of tuning mode available, seek tuning, manual tuning and preset
tuning.

1. Press the button to select the desired band.

2. Press the / button on the remote control or touch the or button on the
touch screen to tune in a station automatically.

1. Press the button to select the desired band.

2. Press the / button on the remote control to manual tuning.

You can store up to 30 stations on the FM/AM band (6 stations per band) in the unit's
memory. The auto store function allows you to automatically store 6 stations for the
chosen band. If 6 stations with good reception cannot be received, the previous stored
stations (if they exist) remain as they are.

1. Press the button to select the desired band (FM1-FM2-FM3-AM1-AM2).

2. Hold down the button for 2 seconds or longer. The stations with good reception
are stored automatically.

3. Press the button to scan each preset station for 5 seconds and press it again to
stop the preset scan.

In radio mode, press the / buttons on the remote control to scan stations. When you
have found the station of your choice, hold down a button from 1 to 6 to store.

Select a frequency band and use the number buttons (1 to 6) to recall a preset station.
Press the or button on the remote control or touch the preset staion (1 to 6) on the
touch screen can also select a preset station.

Press the button on the remote control to select FM stereo or mono reception. If
signal reception is weak and distortion occurs, you should switch to mono reception.

Press the button on the remote control to select local or distant stations.

main menu

Press the / button to increase the

frequency. Press the / button to reduce the frequency.

r touch the icon

“”onthe

Radio operations

FM1--FM2--FM3--AM1--AM2

User’s Manual page 5-1

RDS (Radio data system) operations

Setting AF MODE

AF/REG

TA (Traffic Announcement)/Emergency broadcast function

TA

TA

The RDS functions are the following:
PI: (Program identification) Code for identifying
program.
PS: (Program Service) name of the station in
alphanumeric characters.
TP: (Traffic Program) identification data for traffic
information broadcasting.
PTY (Program Type): See “Using PTY to select
Program” on the next page.
TA (Traffic Announcement): function enabling the broadcast of traffic information.
AF (Alternative Frequencies): function enabling automatic search for the best alternative
frequency available.

In tuner FM mode, touch the “ ” icon on the top left corner of the touch screen to
display the RDS operation buttons. You can use the touch screen icons or the buttons on
the remote control for the following operations.

*Press the button (or touch the “AF” icon) briefly to switch AF mode on/off. “AF”
is displayed when the AF function is on. “AF” will flash if the signal reception is getting
worse.
*When the AF function is on, the unit automatically searches for the best alternative
frequency available for the current station.

*The message “ALARM will be displayed when an emergency broadcast is received.
The sound output level will be adjusted to the preset output level automatically if the
volume control is set lower.
*It is possible to program the car radio so that it exits disc/USB/card mode or the current
radio station when traffic information is broadcast. Press the button briefly to switch
TA mode on or off.
When TA mode is switched on, the unit automatically broadcasts the traffic information
available. When a station broadcasting traffic information is received, “TP” will be
displayed. To interrupt the broadcast of traffic information without switching off the TA
function, briefly press the button. The unit will then return to the previous mode.

”

REG (Regional Program) function

AF/REG

Using PTY to Select a Program

PTY

Press and hold the button for 2 seconds to switch on or off region mode.

The PTY function allows you to search for stations with a particular program type. Press
the button to enter the PTY search mode. You can select the type by touching the ▲
/ ▼ button on the touch screen or pressing ▲ and ▼ button on the remote control. Refer
to the table below:

NEWS POP M SOCIAL FOLK M

AFFAIRS ROCK M RELIGION DOCUMENT

INFO EASY M PHONE IN TEST

SPORT

LIGHT M

TRAVEL ALARM !

EDUCATE CLASSICS LEISURE

DRAMA OTHER M JAZZ

CULTURE WEATHER COUNTRY

SCIENCE FINANCE NATIONAL M

VARIED CHILDREN OLDIES

User’s Manual page 6-1

MP3/MPEG4

1. Playing a disc, an SD/MMC card or a USB
device containing MP3 files

SRC MODE

,

ENTER

ENTER

To invoke the disc playing control buttons

2. Quick track selection

3. Repeat playing

RPT

4. Selecting an MP3 track (or file) using the number buttons

ENTER

5. Stop playing

6. Pause playback

Connect a USB device using the supplied USB
cable or press the button to open the front
panel, insert a disc into the disc slot or an
SD/MMC card into the card slot.
The unit will automatically switch on when a
disc, card or USB device is inserted.
Press the / button to select the
source: DISC/USB/SD.
During MP3 playback, press the ▲/▼/◄/►
buttons to select the required file type (Music

Picture or Movie) or folder.
Then confirm using the button.
Then select the next track desired using the ▲/▼
Buttons. Press the button to
start playback.

During disc playing, touch the anywhere of the touch screen, you can invake the disc
Playing control buttons.

When playing MP3 files, press the / button on the remote control to go to the next
or previous track.

When playing MP3 files, press the button repeatedly on the remote control to select
repeat mode. You can select one of the following modes: REP 1, REP DIR, REP ALL or
REP OFF. While in REP 1 mode, the unit will play one track repeatedly. While in REP DIR
mode, it will play in the current folder repeatedly. In REPEATALL mode, the unit will play
all tracks repeatedly.

In folder/file list display mode, press the number buttons to select a track, then press the

button to confirm.
Note:
* This function can only be operated using the remote control.

When playing MP3 files, press the ■ button to stop playback.

When playing MP3 files, press the button to switch between play and pause.

DVD/VCD/CD/MP3/MPEG4 operations

Folders list

When you have selected a program type, the radio starts to search for broadcasts
corresponding to your choice, and stops if a corresponding broadcast is found. If no
corresponding broadcast is found, normal radio reception is resumed.

Information display

Files list

Files type

User’s Manual page 7-1

7. Skip backward/forward/F.F/F.REW playback

8. [PICTURE] --- JPEG Files

VCD/CD

1. Playing a VCD/CD

2. Quick track selection

3. Repeat play

4. Play track at random
RDM

5. Number buttons

6. Stop play

7. Pause playback

8. Skip backward/forward/F.F/F.REW playback

9. Increase or decrease the size of the picture
ZOOM

Press the or button on the remote control to perform fast rewind or fast forward at
the following speeds: 2X, 4X, 8X, 20X, PLAY.

Press the button to start a slideshow from the JPEG file currently selected. Then you
can use the ◄/► buttons to rotate the displayed pictures and the ▲/▼ buttons to flip
up/down or left/right.

Insert a VCD/CD disc into the slot. The unit will automatically switch on. If a disc is
already loaded, press the button to start playback.

During VCD/CD playback, first press the button to return to the beginning of the
current track. Press this button again to play the previous track. Press the button to
play the next.

During VCD/CD playback,

During VCD/CD playback, press the button on the remote control to play any track
at random. Press this button again to return to normal play.

Use the number button to select a track to play.

During VCD/CD playback, first press the ■ button to stop playback. Press the button to
resume play. Press the ■ button twice to stop playback completely.

During VCD/CD playback, press the button to switch between play and pause.

Press the or button on the remote control to perform fast rewind or fast forward at
the following speeds: 2X, 4X, 8X, 20X, PLAY.

Press the button to increase or decrease the picture size. Press the button
repeatedly to change the zoom size.

10. Repeat a specific segment on a disc

A-B

REPEAT A-

A-B

REPEAT A-B

A-B

RPT

1. During normal playback, press the button once to determine the starting point of

the segment to be repeated and “ " will appear on the screen.

2. Press again to determine the end point of the segment to be repeated and

“ ” will display on the screen.

3. Set pointA to set point B will be repeated in a loop until you turn off A-B repeat.

4. Press again to cancel the A-B repeat mode.

press the button on the remote control to select a repeat

mode from: REP 1, REPALL or REP OFF.

ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM

1/3, ZOOM 1/4, ZOOM OFF

User’s Manual page 8-1

10. On screen display

DISP

SUB-T

11. Selecting an audio mode

AUDIO

12. PBC
PBC

PBC

13. Programmed playback
PROG

ENTER

ENTER

In CD mode, press the button (in VCD
mode, press and hold down the button) to
display the following information:

"DiscType,Track*/*(theplayingtrack/totaltracks), Mute, PBC (VCD only),
Repeat Mode, Elapsed Time of the Playing Track

In VCD/CD mode, press the button on the remote control repeatedly to select an
audio mode in the following order: MONO L MONO R MIX MONO - STEREO.

In VCD mode, press the button. PBC playback starts and the menu of the entire
disc appears on the screen. Then you can select the desired track by using number
buttons. To cancel the PBC function, press the button again.

Note: * PBC playback is only compatible with discs which are version 2.0 or above.

In VCD/CD mode, press the button and the program menu will be displayed.
Press the number buttons to select the track number. Use the direction buttons to move
the cursor to PLAY and press to start programmed playback.

Move the cursor to CLEAR and press to clear the program. To delete the
programmed playback menu and return directly to the previous mode, use the ■ button.

--

1. During normal playback, press the button once to determine to the starting point
of the segment to be repeated and “ " will appear on the screen.

2. Press again to determine the end point of the segment to be repeated and
“ ” will display on the screen.

3. Set pointA to set point B will be repeated in a loop until you turn off A-B repeat.

4. Press again to cancel the A-B repeat mode.

Insert a DVD into the slot. The unit will automatically switch on. If a disc is already
loaded, press the button on the remote control to switch to DVD mode.

During playback, press the button again to play the previous chapter. Press the
button to play the next chapter.

During DVD playback, first press the ■ button to stop playback. Press the button to
resume play. Press the ■ button twice to stop playback completely.
Note:
* This function can only be operated by using the remote control.

During DVD playback, press the button to switch between play and pause.

Press the or button on the remote control to perform fast rewind or fast forward at
the following speeds: 2X, 4X, 8X, 20X, PLAY.

14. Repeat a specific segment on a disc
A-B

REPEAT A-

A-B

REPEAT A-B

A-B

DVD

1. Playing a DVD

MODE

2. Quick chapter selection

3. Stop play

4. Pause playback

5. Skip backward/forward/F.F/F.REW playback

User’s Manual page 9-1

DVD

6. Repeat play
RPT

7. Increase or decrease the size of the picture

ZOOM

8. On screen display

SUB-T

9. Changing the viewing angle (Multi-angle)

ANGLE

10. Changing audio language (multi-audio)

AUDIO

11. Changing the subtitle language (multi-subtitle)
SUB-T

During DVD playback, press the button on the remote control to select a repeat
mode from: REP CHAPTER, REP TITLE, REP ALL or REP OFF.

Press the button to increase or decrease the picture size. Press the button
repeatedly to change the zoom size. ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM
1/3, ZOOM 1/4, ZOOM OFF

In DVD mode, press and hold the button on the remote control and the display
shows: "Disc Type, Title*/*(theplaying title / total titles), Chapter*/*(theplaying
chapter/ total chapters), Elapsed Time of the Disc".

Press and hold the button again to show the following information:
Language */* (the number of playing language/the amount of optional languages)
or “Off”, Language Type, Audio Type, Subtitle*/*(theserialnumberofplayingsubtitle
/the amount of optional subtitles) or “Off”, Angle*/*(thenumberofplayingangle / the
amount of optional angles) or “Off".

Press and hold the button repeatedly to display the following information: Chapter
remaining time, Title elapsed time and remaining time. Press and hold the button a sixth
time to turn off the display menu.

With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, press
the button to switch between viewing angles during playback. The viewing angle
changes in the following order: [1/3], [2/3], [3/3].
Note:
* This function is operated by using the remote control.
* This function is only available with DVDs featuring multi-angle recordings.
* The symbol on a DVD packaging indicates that it features multi-angle scenes. The
number in the symbol indicates the number of angles from which scenes were shot.
* The ANGLE button does not function during fast forward/fast rewind or pause.

DVDs can provide audio playback with different languages. With DVDs featuring multi­audio recordings, you can press the button to switch between language and
audio systems during playback.

Note:
* For some DVDs, you need to change the language in the menu).
* This function is only available with DVDs featuring multi-audio recordings.
* The number in the symbol on a DVD packaging indicates the number of recorded
languages/audio systems.

With DVDs featuring several subtitle languages, press the button to switch
between subtitle languages during playback.

Note:
* This function can only be operated by using the remote control (for some DVDs, you
need to change the language in the menu).
* This function is only available with DVDs featuring several subtitle languages.
* The number in the symbol on a DVD packaging indicates the number of recorded
subtitle languages.

2

User’s Manual page 20-

12. Using the titles

TITLE

13. Using the menus

MENU

ENTER

13. Repeat a specific segment on a disc

A-B

REPEAT A-

A-B

REPEAT A-B

A-B

14. Random playback

RDM

DVD SETUP

SETUP

ENTER

SYSTEM SETUP

TV SYSTEM

SCREENSAVER

In DVD mode, press the button on the remote control to display the DVD player
menu.

Note:
* This function is operated by using the remote control.

In DVD mode, press the button on the remote control to access DVD’s menu.
Then you can find your favorite program by entering the relevant DVD’s menu.
Use the ◄/►/▲/▼ buttons on the remote control to select a item on the menu you wish
to play, then press the button to confirm your selection.

Note:
* Not all DVD discs have DVD’s menu playing features.
* For some DVD discs, the content of TITLE and MENU is same.

1. During normal playback, press the button once to determine to the starting point
of the segment to be repeated and “ " will appear on the screen.

2. Press again to determine the end point of the segment to be repeated and
“ ” will display on the screen.

3. Set pointA to set point B will be repeated in a loop until you turn off A-B repeat.

4. Press again to cancel the A-B repeat mode.

Press the button on the remote control to playback the tracks(files) on the disc in
random order.

In DVD mode, press the button on the
remote control to display the setup menu on the
screen. (A disc must be inserted in the unit).
Use the ◄/►buttons to select one of the following
setup items: “SYSTEM”, “LANGUAGE” , “AUDIO”,

“DIGITAL”.
Use the ◄/►/▲/▼ buttons to select the setting
and press the button to confirm.

Set the TV system: NTSC/PAL/AUTO.

Select “ON” (default setting) for the screensaver
to appear when the unit has stopped for more than
3 minutes.

SYSTEM SETUP

EXIT SETUP

TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT

SYSTEM SETUP

EXIT SETUP

SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT

AUTO

PAL
NTSC

TV SYSTEM

SYSTEM SETUP

EXIT SETUP

TV TYPE
PASSWORD
RATING
DEFAULT

ON

OFF

TV SYSTEM

SCREEN SAVER

User’s Manual page 21-

LANGUAGE SETUP

EXIT SETUP

SUBTITLE LANG

MENU LANG

OSD LANGUAGE

AUDIO LANG

ENGLISH

GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
RUSSIAN
POLISH

“TV TYPE” (display format)

4:3 PS

4:3 LB

16:9

PASSWORD

RATING

DEFAULT

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANGUAGE

Select the display format to watch widescreen
Movies.

(Pan Scan): For 4:3 screens, the left and

right edges will be cut.

(Letter Box): For 4:3 screens, black bars

will appear at the top and bottom.

: For a widescreen TV.

The default password is “0000”.
To change the password, enter the old password,
and then enter the new one.

Theratingofthediscisfrom1to8:
(1): Minimum rating level.
(8): Maximum rating level.
The default setting is “8”.
Note: The rating can only be selected when the
password lock is not switched on.
Conversely, the limit only works when the
Password lock is activated ( ).

Restore the factory default settings.

Select the On Screen Display language.

Select the default audio language.
(If several languages are available on the DVD).

SYSTEM SETUP

EXIT SETUP

PASSWORD
RATING
DEFAULT

TV SYSTEM
SCREEN SAVER

TV TYPE

4:3PS

4:3LB
16:9

SYSTEM SETUP

EXIT SETUP

RATING
DEFAULT

TV SYSTEM
SCREEN SAVER

TV TYPE

PASSWORD

----

SYSTEM SETUP

EXIT SETUP

PASSWORD

DEFAULT

TV SYSTEM
SCREEN SAVER

TV TYPE

1 KID SAFE
2G
3PG
4PG13
5PG-R
6R
7 NC-17

8 ADULT

RATING

SYSTEM SETUP

EXIT SETUP

TV TYPE
PASSWORD
RATING

RESTORE

TV SYSTEM
SCREEN SAVER

DEFAULT

LANGUAGE SETUP

EXIT SETUP

SUBTITLE LANG
MENU LANG

OSD LANGUAGE

AUDIO LANG

ENGLISH

GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
RUSSIAN
POLISH

User’s Manual page 22-

SUBTITLE LANGUAGE

MENU LANGUAGE

AUDIO SETUP

▲/▼

AUDIO OUT

KEY ▲/▼

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

Select the default subtitle language.
(If several languages are available on the DVD).

Select the default menu language.

(if several languages are available on the DVD).

Use the buttons to adjust the setting.

: Three audio output modes

-SPDIF/OFF,SPDIF/RAW and SPDIF/PCM.

: Use the buttons to adjust the tone.

: This option allows the user to adjust
the dynamic compression in order to limit
variations in volume.
“LINE OUT”: Compress the signal.
The variation in volume is small.
“RF MOD”: The variation in volume is large.

Select “LINE OUT” in OP MODE to adjust the
compression rate.
Select “FULL” to limit the volume variations
as much as possible. Select “OFF”, to switch off
the dynamic compression function.

EXIT SETUP

LANGUAGE SETUP

MENU LANG

OSD LANGUAGE

AUDIO LANG

ENGLISH

GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
RUSSIAN
POLISH

SUBTITLE LANG

LANGUAGE SETUP

EXIT SETUP

OSD LANGUAGE

AUDIO LANG

ENGLISH

GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
RUSSIAN
POLISH

SUBTITLE LANG

MENU LANG

AUDIO SETUP

EXIT SETUP

AUDIO OUT

KEY

SPDIF / RAW
SPDIF / PCM

SPDIF / OFF

AUDIO SETUP

EXIT SETUP

AUDIO OUT

KEY

#

-+4

-+2

-0

--2

--4
b

DIGITAL SETUP

EXIT SETUP

OP MODE

DYNAMIC RANGE
DUAL MONO

RF REMOD

LINE OUT

DIGITAL SETUP

EXIT SETUP

OP MODE

DYNAMIC RANGE
DUAL MONO

FULL

-6/8

-4/8

-2/8
OFF

User’s Manual page 23-

DUAL MONO

Select the audio channel:
STEREO, MONO L, MONO R or MIX MONO.

DIGITAL SETUP

EXIT SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO STEREO

MONO L
MONO R
MIX MONO

Using the USB stick:

MODE

Note:

Using the SD/MMC card:

MODE

Note:

This disc player features a front panel USB interface.A USB device can be connected to
this port. When you insert a USB stick through the port, the DVD player will search for the
MP3/WMA files and start to play them automatically.
If you insert a SD/MMC card into the SD/MMC card slot or a disc into the disc slot while
reading the USB stick, the unit will play the disc. You can press button to switch to
USB playback mode.

- Use the USB adaptor cable, if necessary.

- The operations of playing MP3/WMA files in the USB is the same as the MP3/WMA
operation described in the CD/MP3/WMA disc operations.

- When reading the USB stick, please don't touch or remove it.

- If following the instruction above, the unit can't read the file in the USB stick, please
check if the device is in good condition, or take it out then insert it into the USB port
once more.

- The main unit can only support the standard USB-memory device.

- USB MP3 player is not a standard which means different brand name or different
models have their own standard. So this product cannot support all MP3 players.

- When connecting an MP3 player and there is a normal battery in the player (non
rechargeable battery), you should remove the battery from the MP3 player and then
connect it to the USB port. Otherwise, it may cause battery burst.

- When reading a USB device, be sure not to remove it from the USB port (change mode
beforehand).

This disc player features a SD/MMC memory card slot. When you insert a SD/MMC card
into the memory card slot, the DVD player will read the SD/MMC card automatically.
If you insert a USB stick into the USB port or a disc into the disc slot while reading the
SD/MMC card, the unit will play the file in the USB or track on the disc. When you press
the button to switch back to SD/MMC reading mode.
The operations of the SD/MMC memory card playback is the same with the CD / MP3 /
WMA disc operations described above.

- When reading the memory card, please don't touch or take out the card.

- If following the instruction above, the unit can't read the card, please check if the card
is in good condition, or take out the card and then insert it into the card slot once more.

USB playback

Memory Card playback

User’s Manual page 24-

This car DVD player is equipped with an Audio / Video Auxiliary input jack on the front

panel, so you can connect a video game, digital camera/camcorder or other device you
wish to use in this car DVD payer.

To connect a video device to the auxiliary A/V input jack, first connect it with the cable
provided, Then

to AV IN mode.

When link up your mobile phone to this bluetooth hands-free system, you can dial or
receive calls via this blutetooth device during driving.
You can also transmit the audio data(music) from a mobile phone to the DVD tuner via
this blutetooth device.
Sound and picture will be automatically off when there is an in-coming call. Voice comes
out from your car speakers and the built-in microphone receives your voice.

(See the menu of the hands-free system)

“ ” menu

Before you use bluetooth free-hands system, between this bluetooth free-hands system
and your bluetooth mobile phone must be connected with each other. This process is
called “Pairing”.

1.Turn your bluetooth mobile phone on and activate pairing mode. Now your bluetooth
mobile phone searches for bluetooth devices in the reception range. When mobile phone
detect the hands-free sytem, the “CAR BT”(name of the free-hands system) will appear
on the screen of the mobile phone

2. Once the bluetooth free-hands was found, please enter the pairing code “0000” to
connect both devices with each other.

When you switch the head unit in to standby mode, then turn it on again, the bluetooth
module can establish bluetooth connection automatically
If connecting success, “CON OK”, “CONNTED” will be visible on the LCD display, and
the “BT” will twinkle continuously on the LCD display. Otherwise, it will appear “CONT
DOWN”, “NO CONT” on the LCD display. Meanwhile, the “BT” will not twinkle
continuously on the LCD display.

4.1 Dial with the mobile phone directly.

4.2 Dial with the remote controller.

4.2.1 After connecting, press the “ ” or push button on the remote control to enter

telephone number .

You have to active automatic call reception so that the mobile phone accepts
incoming calls automatically .
In many countries, this is a prerequisite for legal operation of hands-free
equipment while driving.

2. Pairing

3. CONNECT

4. DIAL CALL

0~9 , #

*

.

Touch the button on the front panel or press the on the

remote control switch

Touch the button on the front panel or press the

on the remote control to switch to BT mode.
Or touch the icon on main to switch to BT
phone interface.

SRC MODE

1. Switch to BT(bluetooth) mode

SRC

MODE

A/V IN Operations

Bluetooth hands-free function

User’s Manual page 25-

- Pressing and holding the button on the remote control when you want to input “ + ”.

- Simultaneously, the entered number will be appeared on the touch screen.

- If a number is wrongly input, press the button on the remote control or touch the
icon “ ” on the touch screen to delete the incorrect number.

4.2.2 Press the “ ” button on the remote control to dial.

When a ring comes, the caller’s numbers will be shown on the touch screen, you can
decide whether or not to answer, so you avoid unnecessary trouble and disturb.

If the automatic call accept function is not activated,when a ring comes, press the “ ”
button on the head unit or remote control to switch on the calling.

When a ring comes, press the “ ” button on the head unit or remote control to reject the
coming call.

During a phone call, press the “ ” button on the head unit or remote control to hang up
the current call.

When you missed a coming call, or you terminated an incoming call just now, click the
icon “RECALL” on the touch screen to call back.

During a phone call, you can transfer the call to your mobile phone or the hands-free
system by pressing the “ ” button on the remote control or touching the icon “ ” on
the touch screen.

If your mobile phone support function ( Advance Audio Distribution Profile) that it
is special designed for transmitting stereo music to bluetooth device.
You can transmit the audio data(music) from a mobile phone to the DVD tuner via this
blutetooth device. You can listen to the music stored in your mobile phone by the
bluetooth hands-free system.

- Make sure that your mobile phone and this DVD tuner were connected via pairing.

Touch the icon “ ” on the touch screen to active audio transmission.The touch screen
will pop up the following interface:

: Pause/play : Stop

: Previous Track : Next Track

The , and button are
available in A2DP playback status.
Touch the (Source) button on front panel or press the button on the remote
control to switch to other mode.

At connect status, touch the icon “ ” on the touch
screen, or press and hold the button on the
remote control to enter phone book interface.
The structure of the blue tooth menu as follows:

+

DEL

5. Caller ID

6. Accepting an incoming call

7. Rejecting an incoming call

8. Terminating a call

9. Call back

10. Call Transfer

11. A2DP Function

A2DP

SRC MODE

12. Phone Book

BT MENU

9:/ on the remote control

A2DP

Pbook

Switch

User’s Manual page 26-

(Preset phone number) :
List of saved phone number, you can save 6 phone
numbers total.

(Received phone number):
List of the latest 6 received calls.

(Dialed phone number):
List of the latest 6 outgoing calls.

(Missed phone number):
List of the latest 6 Missed calls.

Use ▲/▼ cursor button on the remote control to select the item.
Press the to enter the current menu item.

You can select the next or previous phone number that stored on preset number list
by pressing the ▲/▼ button.

When you access the preset phone number list.
You can see (1-6) on the LCD display if
you haven’t stored any phone number. Then press

again to enter editing status.

-Pressthe“ ” or pushbuttonontheremote

control, or touch the numerical buttons “0~9”, or on

he touch screen to enter telephone number .

- Pressing and holding the button on the remote control, when you want to input “ + ”.

- Simultaneously, the entered number will be appeared on the touch screen.
If a number is wrongly input, press the button on the remote control or touch the
icon “ ” on the touch screen to delete the incorrect number.

After the entire phone number has been input, touch the icon “ ” to save the phone
number. Touch the icon “ ”

When you look around the preset phone number or received list or dialed list or missed
list, you can dial any phone number on the lists by pressing “ ” button without entering
the phone number again.

Touch the icon “ ” on the BT main interface,
t

Once a successful connection has been

established, when

phone number

memory.

ENTER

a) Select preset number list:

b) Edit preset number list:

NO NUMBER

ENTER

0~9 , #

*

#

*

t

+

DEL

c) Dialling from the phone number memory

13. SETTING

Connect:

to return the upper tier bluetooth interface.

If a new phone number is saved, the previous saved number will be deleted.

he bluetooth setting interface will pop up.

you turn off the unit and then switch
on it, or disconnect connection between your mobile
phone and this bluetooth hands-free system.
Click the icon “ ” on the touch screen to restablish
the bluetooth connection.

During the connection process, the hands-free system establishes the

connection to the incoming call automatically.

Touch the icon “ ” on the touch screen to clear all the

Note:

Auto Anser:

Pbook reset:

Setting

Connect

Pbook reset

User’s Manual page 27-

Back

OK

Specifications

GENERAL

DVD PLAYER

SCREEN

RADIO
FM TUNER

AM(MW) TUNER

USB/SD(card)

Power Supply Requirements: DC 12 Volts, Negative Ground
Chassis Dimensions: 7”W X 6.3”D X 2”H
Maximum Output Power: 80W X 4CH

aximum : 15A

Current Consumption: 15 Ampere (max.)

Signal to Noise Ratio: more than 50 dB (1KHz)
Distortion: less than 0.2%
Channel Separation: more than 40 dB
Frequency Response: 20Hz - 20 KHz
Disc played:

Size/type: 4.3 inch TFT LCD (16:9)

: 432 RGB X 240
Brightness(cd/ ): 300 cd/
Contrast: 500:1
View angle V:

Frequency range: 87.5 -107.9 MHz (USA.)

87.5 - 108 MHz (EUR.)
IF: 10.7 MHz
Signal to Noise ratio: 55 dB (mono)
Stereo Separation: >25dB

Frequency range: 530 - 1710 KHz (USA.)

522 - 1620 KHz (EUR.)

IF: 450 Khz

USB port type: 2.0
USB port maximum capacity: 32 GB
Card type: SD/MMC
Card maximum capacity: 32 GB

M current consumption

DVD,VCD,SVCD,CD-DA,CD-R/RW /JPEG/ MPEG4/MP3/WMA

Resolution

m² /m²

160°

View angle H: 160°

User’s Manual page 28-

WARNING:

1. To get the best conversation quality, it is recommended that the distance between the
mobile phone and the unit is within 3 metres.

2.Please avoid putting any metal objects or other obstacles between the mobile phone
and the unit.

If it appears that your DVD unit is faulty, please first consult this checklist. It may be that
something simple has been overlooked.

Under no circumstances should you try to repair the player yourself, as this will void the

warranty. Only qualified service personnel may remove the cover or service this player.

No Power

No Picture

Distorted Picture

Completely Distorted Picture

No Color in Picture

Disc Does Not Play

No Sound

The Player Does Not Respond to the Remote Control

Picture is distorted or Only Black and White

No Audio at Digital Output

Buttons Do Not Work

If the power supply is connected to the car accessory circuits, but the engine is not

turned on, switch the ignition key to “ACC.”

Check if the fuse is blown. Replace with a new fuse if necessary.
Check if the POWER button on the front of the player is set to ON.

Check if the monitor or TV is switched ON.
Check if select proper mode has been selected (such as Disc Play mode orAV mode).
Check the video connections.

Check the disc for fingerprints and clean it with soft cloth, wiping from center to the

edge.

Sometimes a small amount of picture distortion may be present. This is not a

malfunction.

The disc format is not the same as the TV-set used (PAL/NTSC). Select the proper

setting in the TV SYSTEM menu.

The disc format is not the same as the TV-set used (PAL/NTSC). Select the proper

setting in the TV SYSTEM menu.

Be sure that the disc label faces up.
Clean the disc.
Check if the disc is defective by trying another disc.

Check the audio connections.

Aim the remote control directly at the sensor on the front of the player.
Remove any obstacles which may interfere with the signal path.
Inspect or replace the remote control battery.

The disc format is not according to the TV-set used (PAL/NTSC). Select the proper

setting in the TV SYSTEM menu.

Check the digital connections.
Check the DigitalAudio menu to make sure that the digital output is correctly set.
Check if the audio format of the selected audio language matches your receiver’s

capabilities.

Press Reset button on the front panel of the DVD unit.

♦

♦
♦

♦
♦
♦

♦

♦

♦

♦

♦
♦
♦

♦

♦
♦
♦

♦

♦
♦
♦

♦

Troubleshooting

User’s Manual page 29-