Boss Audio Systems BV8250, BV8220 User Manual

Download

Page 1

Precautions .....................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Electrical Connection ....................

Remote Control ............................

Control Panel ................................

Basic Operations

Radio Operations ..........................

DISC Operations ...........................

Detaching the control panel ...............

Changing the control panel ...............

Touch Panel

Unit Keys .......................................

TFTMonitor

........................

Audio QualityAdjustments

................

Scroll CaptionAdjustments ..............

Listening to the radio .......................

Storing stations in memory ...............

Listening to a preset station .............

RDS Function ............................. ...

Basic Operations ............................

Select Playback Mode .....................

AUX Operation ...............................

On-Screen Disc Operations .............

....................................

Adjustment .................

Rear View Camera

...............

SettingAudio Mode ..................... ...

ResetThe Factory Setting

..........................

26 26 26 27 27 29 29 30 31

32 33 33 34

7 8

12 12 13

16 16 16 17 17 17

18 1

21 23 24 25

8 19 19 21

DISC Special Functions ................

Setup .............................................

Other Main Operations ...................

Specifications ...............................

Trouble Shooting ..........................

Selecting audio languages ................

Selecting Subtitles ..........................

Selecting multi-angle views ..............

Titlemenu function ..........................

General Setup ................................

Speaker Setup ...............................

Dolby Digital Setup ........................

Preferences Setup ..........................

Defaults Table................................

USB Operations ..............................

MP3/WMA/JPEG Play ......................

MPEG4 Play ...................................

Contents

BV8250

In-Dash AM/FM DVD/MP3/CD Receiver With

5.3 Widescreen Touchscreen TFT Monitor With Front Panel USB Port

Page 2

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy for future reference . Toavoid injury oraccident , read the following precautions before installing and operating the unit .

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press too firmly on the LCD panel on the unit asdoing so candistort the picture or cause a malfunction .The picture may become unclear , or the LCD panel may be damaged .

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags,as this may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving. IFTHE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IFYOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IFTHE PARKINGBRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

-This warning appears only when the parking brake wire is connected to

the parking brake system built in the car ( refer to the electricconnection)

ON INSTALLATION

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine,thinner, commercially available

cleaners or antistatic spray .

-Do not use alcohol to clean the screen . If your car was parked in a cold or hot place, the picturemay not beclear . The monitor is not damaged . The picture will become clear the temperature in your car becomes normal .

Page 3

Safety Information

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.

CAUTION:

THIS DVD PLAYERISACLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USESAVISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYERCORRECTLYASINSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHERTHAN THOSE SPECIFIED HEREIN MAY RESULTIN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERSAND DO NOT REPAIR YOURSELF. REFER SERVICINGTO QUALIFIED PERSONNEL.

WARNING:

TOREDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENTTO RAIN OR MOISTURE.

TOREDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,ANDANNOYING INTERFERENCE, USE ONLYTHE RECOMMENDEDACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected

by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Page 4

Disc Notes

Preparing New Discs with Spots

Rough

Anew disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will n ot play the disc. Therefore, removethe rough edges in advance by using a ball point pen or pencil as shown on the right. To r e m ov e t h e rough edges, press the s i d e of th e pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Label side up

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty,use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.

Adisc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:

1. Direct sunlight

2. Dirty, dusty and damp areas

3. Near car heaters

4. On the seats or dashboard

Discs which cannot be played with this player

DVD-RAM

CDV

CDG

Note:

Adisc may become somewhat scratched (although not enough to make it

unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.

Disc formats supported by this player

DVD

VCD

MP3

Audio and Video Discsize12cm

Audio Discsize12cm

Page 5

Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure

all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use

unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or

modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its

performance.

Avoidinstalling the unit where it would be subject to high temperature, such

direct sunlight, or from hot air, from the heater, or where it would be

dirt or excessive vibration.

This unit can be properly installed either from "Front"(conventional DIN

or "Rear"(DIN Rear-mount installation, utilizing threaded

the unit chassis). For details, refer to the following

illustrated installation methods.

NOTES:

DIN FRONT/REAR-MOUNT

it is

other

optimum

as from subject to dust,

Front-mount) screw holes at the sides of

Installation

USA/EURO FREQUENCY SWITCH

On the right of this device, there is a USA/EURO frequency switch, you can select

the desired radio frequency before installing .

USA/EURO Frequency Switch (radio frequency switch for selecting between the USA and EUROPE frequency band. )

Page 6

Installation

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert

the two KEY PLATE into left and right side of chassis as above illustration.

DASH BOARD

METAL MOUNTING STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET HOUSING

HEX BOLT

KEYPLATE

PLASTIC COVER

Page 7

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.

2). Pull-offthe front panel and keep the front panel into the case .

PROTECTIVE CASE

Detaching The Front Panel

Before detaching the control panel, be sure to turn offthe power.

1). Press the release button and the left hand side of the front panel will release.

RELEASE BUTTON

Attaching The Front Panel

1). First insert the right hand side of the front panel into the hollow of the unit . (NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)

2). Gently push the left hand side of the front panel until you feel a “ Click” .

Hollow

Bulge

Page 8

Panel Angle Adjustment

Caution:

Do not insert your finger behind the control panel.

When you want to change the viewing angle of the operating unit toplay, you can touch the section on touch screen (or press the button on the front panel) repeatedly to select the desired angleas follows:

CHANGING THE CONTROL PANEL ANGLE

Angle 3

Angle 4

Angle 1 Angle 2

Page 9

Electric Connection

WIRING CONNECTION

Note : The "PARKING BRAKE" wire must be connected to the parking brake system of your car. When the parking brake is engaged, the LCD screen will be allowed to view your video. If not, the screen will produce an image saying, "PARKING BRAKE" This is a safety feature designed for the driver not to watch a video while driving. The video output on this unit is not affected by this.

FRONTRCA WHITE L

FRONTRCA RED R VIDEO OUT 1YELLOW

FRONTRCA OUTPUT

CABLE

GREY

GREY/BLACK

FRONT Rch SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

REAR

Lch SPK.

BLUE

FUSE

GROUND(B-)

IGNITION

SWITCH(B+)

RADIOANTENNA JACK

RED

YELLOW

BLACK

MAIN UNIT

REAR Rch SPK.

FRONT

Lch SPK.

CHOKE BOX

RCH RED

LCH WHITE

REAR RCA OUTPUT

CABLE

GREYSUBWOOFER VIDEO OUT2 YELLOW

COAXIALOUT BROWN

RCA CABLE

WHITE

(B+)12V REAR CAMERA SWITCH

GREEN YELLOW

REAR CAMERA INPUT

(B-)PARKINGBRAKE

ISO CONNECTOR

FUSE

CONSTANT

12 VOLTS

AUTO ANTENNA

&TURNON

Page 10

Remote Control

Button

Ref #

Function

REPEAT

CLK

Press it briefly to view the clock time , Press again to return to normal display mode . Press longer to set the time .

MODE

Press repeatedly to cycle through the various modes: RADIO>DISC>AUXIN.

STOP

Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc.

SETUP

Press this button to open the SETUP menu.

MO/ST (AUDIO)

In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced.

SUBTITLE LOCAL/ DISTANT

In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.

Pressing this button will open a menu presenting you with the playback repeat options available for that kind of disc.

2 6

Page 11

Remote Control

Button

Ref #

Function

GOTO

Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed.

Press these buttons to skip ahead or back one track. (Note: In DVD mode, press continually the twice to skip back one)

SEL

Press this button repeatedly to cycle through the various audio and video adjustments you can make: Volume, Bass, Treble, Balance, Fader, Color, Brightness, Contrast and Tint.

VOL+/-

Use these controls to adjust the volume level. Press to navigate the various menus present in the product.

///

Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output.

Menu SubWoofer

()

BAND (OSD)

In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play.

(POWER)

Pressthis buttonto turnthe unitON ,press andhold toturn the unitOFF.

PLAY/ PAUSE

In Disc Playback mode, press to pause playback. Press again to start where playback stopped.

MUTE

Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

TITLE/ PBC(A/P)

When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.

Press this button to adjust the screen viewing angle (see page 8).

ANGLE

For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, press this button to see them.

EQ/LOUD

Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening.

InDisc Playbackmode, pressfor fast forward/reverse playback.

ENTER

This button is used to confirm selections and settings within many of the menus in the OSD system.

Page 12

Remote Control

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated (See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

Inserting the Batteries

Button

Ref #

Function

0-9

These buttons are used for numeric entry in many different menus. In addition, in Radio Mode (when RDS is engaged), 0 serves as theTAbuttonand 9 serves as theAF button.

This button is used with the other number buttons for use with two-digit number entries.

+10

1-6

Sixnumbered presetbuttons storeand recallstations foreach band.

Note :

The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation .

Page 13

Control Panel

Touch Panel

Key Functions

10. Volume- : volume adjustment (-)

Touch Screen Key :

6. MOD

: operating mode selection .

7. : Previous

2. TA : Turningpre-switching for traffic

announcements on and off . (For RDS)

3. AF : Switchon and off

and alternative frequency.(For RDS)

1. (Angle) : Changing the viewing

angle of the operating unit .

4. (Eject) : Touch it to insert and

eject the DISC .

8. Volume+ : volume adjustment (+)

9. SEL : select the menu of the

Sound/Picture

5. : Toswitch of the sound .

123456

78910

VOLUME-

SEL

VOLUME+

MOD

AFTA

VOLUME-

SEL

VOLUME+

MOD

AFTA

MODE

Page 14

Control Panel

Unit Keys :

MODE

1. REL BUTTON

Press this button to release the front panel for removal . Refer to see page 7.

2. (POWER On/Off)/MOD BUTTON

Press it to switch the device ON, press and hold (approximately 2 seconds) to switch the device OFF . During the playback mode, you can press it to select an input mode by pressing repeatedly until proper one is found:

AUXIN>RADIO>DISC

If you are in USB playback mode and want to select the DISC mode, press the STOPbutton and then press the GOTO button.

3. VOL+/ VOL- BUTTON

In normal mode, this button is used to increase or decrease the volume. It is also used as an UP/DOWN knob when audio or video settings are being adjusted when accessed using the SELECT button.

5. BAND BUTTON

press it repeatedly to select the desired radio band: FM1, FM2,

FM3, AM1(MW1), AM2(MW2) .

In Radio mode,

4. SELECT BUTTON

To access the available adjustment settings for audio and video, press this button repeatedly to cycle through and select them:

Tint Contrast Bright Color Fader

Buzzer Volume Bass Treble Balance

Page 15

Control Panel

8. /CH 1-6 BUTTON(RADIO PRESET)

a). In Disc Playback Mode Press this button to pause playback, press it again to resume playback. b). In Radio Mode Press this button repeatedly to preset station. (Please refer to see page 20 .)

7. ANGLE (Screen position)

Press this button repeatedly to cycle through the different positions.

11. RESET BUTTON

Press this button to return to factory settings .

12. IR SENSOR

10. (EJECT) BUTTON

Press the button to eject the DISC or insert the DISC to start play .

13. AUX Input Jack

For information about connecting a AUX device, please see page 25 .

14. USB PORT

For information about connecting a USB device, please see page 33.

15. TFT Display

The operation of the TFT, please see page 17.

(Thin Film Transistor)

6. MUTE /PTY BUTTON

Press this button briefly to select the MUTE or NOT . In Radio Mode, press this button and hold for a bout 2 seconds to select the PYT

of the program type (examples of such types of program are : NEWS, POP.....)

9. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)

A) In DISC, USB mode: if you wish to jump forwards or backwards press / buttons. (Note: in DVD mode, press the button continually twice to skip back one track during playback.) To go through the tracks , press longer the or button, FF X2 appears in the display. Operating it again, the speed of rapid forward/reverse changes according to the disc as follow:

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

B) In Radio Mode: press briefly the or buttonin order to set a radio station manually. Press longer (for more than two seconds) in order to start the search for a radio station automatically.

Page 16

Basic Operation

Touchthe screen the VOLUME- to decrease the volume level .

Touch screen

Touchthe screen the VOLUME+ to increase the volume level .

Setting The Buzzer ON/OFF

Touch the SEL section on the touch screen to select the

item, and then touch the VOL+/- (or rotate the vol+ /vol-) to switch the

BUZZER

ON/OFF .

SEL

VOLUME+

VOLUME-

Ejecting The Disc

Use your finger to touch the

range on touch screen , the control panel of the unit will swing downwards . Then

you can insert the disc or eject the disc . (You can also press the button on the front panel to eject the disc or insert the disctostartplay.)

Select Sources

Touch the MOD section on the screen, the signals will display in the screen as follow :

repeatedly

DISC

AUX IN

RADIO

MOD

Mute Function

Use your finger to touch the section , it will mute the sound but the disc continues playing. Touchit again toresume .

Setting The Clock

Touch the CLK section on the screen and hold for about 2 seconds the hour will flash , rotate the VOL+/- to adjust . Touch it again, the minute will flash, then use the VOL+/to adjust .

CLK

Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF.

POWER On/Off

Press the VOL+/- on remote control , to change the volume level .

Volume Adjusting

Volumebutton

Press the VOL+/- on the front panel to change the volume level .

Page 17

LCD Monitor Adjustment

During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SELbutton on front panel

mode

)

to access the Picture

selection menu, by repeatedly touch the SELsection, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker. BRIGHT:0to32 User can use the Vol+/- knob to adjust the brightness level from 0 to 32 . CONTRAST: 0 to 32

To adjust the contrast of the bright and

dark portion. TINT:0to32 Adjust the tint if the human skin color is

unnatural.

-Adjustable when NTSC is selected for NTSC/PAL .

ADJUSTABLE ITEMS:

““

Rear View Camera

When you connect a rear view camera to this system. It will display the image in a mirror like fashion. Once you engage the car into Reverse the screen will show the camera image.Then once you take the car out of Reverse the screen will go back to the previous mode.

Basic Operation

Audio Quality Adjustment

During DISC playback, use your finger to touch briefly the SEL section on the screen (or press

SELbutton on the front panel ) to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

It`sdependon your habittosetup the data.

ADJUSTABLE ITEMS: Volume:

Bass:

Treble:

0to32

Adjust volume level by using VOL +/-.

-14to+14

Adjust bass level by using VOL +/-.

-14to+14

Adjust treble level by using VOL +/-.

SEL

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

touchtoadjust

touchtoselect

Volume Bass Treble Balance

Contrast Bright ColorTint

FaderBuzzer

Volume Bass Treble Balance

Contrast Bright ColorTint

FaderBuzzer

SEL

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

touchtoadjust

touchtoselect

Page 18

Reset Factory Settings

RESETbutton is placed on the housing and must be activated with either a ballpoint pen or thin metal object.

The RESETbutton is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B.All the function buttons do not operate. C. Error symbol on the display.

RESET

Basic Operation

Balance:

Fader:

R0-10toL0-10. Adjust sound balance between left and right speakers by using VOL + / -

F0 10toR0-10. Adjust sound balance between front and rear speakers by using VOL + / VOL- .

Touch the screen the DSP range (or press the EQ/LOUD button on the remote ) to select one of the preset sound modes .

The information will display in the monitor as follow :

(Rock/Pop/Jazz/Classic/Flat).

Setting Audio Modes

It`s depend on your habit to select the

Audio mode .

POP

FLAT

ROCK

CLASSIC

JAZZ

to ahead/back (proceed/cancel) , and then press the SETUP button briefly to confirm .

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

(Please note : press the button longer again to renew it . )

DVD 11-0:44:36

LUD

SWF

POP

11:08

DISC

OSD

TA AF

CLKSWF LUD DSP

RDM INT RPT

touchtoselect

DSP

In Radio mode:

You can adjust your desired scroll caption , the method of the operation as follow: A). Press and hold the SETUP button (for about 2 seconds) on the remote control, the adjustment scroll bar will display on the screen . B). Use the VOL+/- to select among of

the “A, B, C ....X, Y, Z, and blank ”, and

use the / buttonon the front panel

Scroll Caption Adjustment

Page 19

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

SEL

ST/MON

VOLUME- VOLUME+

LOC APS

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

4 5 6

2 31

MOD

BND

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

TA AF

PTY

DSP

CLK

SWF

LUD

Radio Operation

Listening to the Radio

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

(

)

You can also press the BND on front

panel repeatedly to select the band .

Switching To Radio Mode

Touch the MOD range repeatedly on the screen to select the RADIO mode. the following information will appears as below:

Touch “ ” to next . Touch “ ” to previous .

When an FM stereo broadcast is hard to receive

Touch the section on touch screen (or press ST/MO button on the remote) to select the MONO or STEREO mode .

ST/MON

(

)

When Stereo mode is activated, the ST

symbol will appear .

Selecting The Frequency Band

Touch the sectionon the touch screen repeatedly to select the band , screen band will show in turn :

BND

ST/MON

MOD

Start Searching For a Station

During Radio mode, briefly touch the screen of “ ” section or press the “ ”on front panel to increase frequency by one step of channel spacing .

Briefly touch the “ ” section or press the “ ”button on the front panel to decrease frequency by one step of channel spacing .

Manual Search

Automatic Search

During Radio mode, touch and hold (for more than 2’s ) the screen of “ / ” section or press longer the “ / ” on the front panel to start search for a radio station automatically .

Page 20

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

4 5 6

2 31

MOD

BND

Radio Operation

Automatic Memory Storing & Program Scanning

Automatic Preset Setup

Storing Stations In Memory

Setting Memory

Press the /CH1-6 button repeatedly on the front panel to preset stations at radio mode . Or touch the screen the 1-6 sections

(

)

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations.The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below :

-Store in Memory Touch and keep the 1-6 sections (or press and hold the /CH 1-6) for about 2 seconds, the current listening station will be stored into the number location .

-Retrieve a preset station Touch the 1-6 sections briefly (or press

the /CH1-6button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display .

RDS FUNCTION

TA Traffic Annonuncement

(priority For Traffic Information)

In Radio mode, touch the TA section briefly (or swing the SEL knob briefly in the TA/AFdirection) ,

to activate the TAfunction.Touch it again to turn off the TA function .When theTAfunctionis activated, the TA symbol appears in the display .

In Radio mode, touch it to select

the desired item, it will display the

following as below :

In Radio Mode, Touch and keep the

APS section on the touch screen (or swing and hold the SEL knob in direction of the APS/DISP) for about

2 seconds to active automatic station storage.The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

Touch the LOC section on the

touch screen (or press LO/DX button on the remote) to select the LOCALor DX mode .

To tune in strong-singnal FM Station only (LO/DX function)

(

)

You can choose between the LOCAL

and DX(DISTANCE) modefor local or

long-distance trafficnews .

LOC

APS

Touchtopresetstation

FM1 106.30 MHz

LUD

SWF

POP

11:08

DISC

TA AF

PTY

DSP

CLK

SWF

LUD

Scan Function

In Radio mode, briefly touch the

APS section on the touch screen

the radio briefly plays all the preset stations of the frequency band .

APS

Page 21

Radio Operation

During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TASEEK) .

If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up.

When theTAfunctionis switched on , the FM traffic automatically interrupt CD operation(the wordTRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of trafficannouncements.

After the traffic announcements has

finished, the program that was previously running is resumed.

Interruption of the TAFunction: if you would like to interrupt the current trafficannouncement, touch the TA section on screen briefly . This does switch offthe TA mode .

AF FUNCTION

(Alternative Frequencies)

AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into .

Touch theAF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , theAF function is activated. TheAF symbol appears in the display .

When theAF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few

PTY FUNCTION

In Radio mode, touch the PTY section briefly (or press and hold the MU/PTYbutton on the front panel) , to select the Program type .

In Radio mode, touch the AF section briefly (or swing and hold the SELknob in the TA/AF

direction) , to activate the AF function.Touch it again to turn off the AF function .

besides the stations name, some FM stations also transmit information on the type of program. This information can be displayed by your car radio .

PTY Selection of the program type

Examples of such types of program are :

SPORT NEWS POP WEATHER ......

With PTYfunction you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message “PTYSEEK” then appears briefly in the display .

When PTYhas been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display.If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .

minutes in the case of weak signals. Whenever the new AF frequency is

stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message “NEW FREQUENCY“ is displayed for one or two seconds.

the status of the AF function is shown by anAF symbol in the display.

If theAF symbol appears in the display, theAF function is switched on and RDS transmission date is being received . If theAF symbol flashes in the display, theAF function is selected but no RDS signal can be received at the moment .

Note :

PTY

Page 22

DISC Operation

Basic Operation

1. Previous

2. Next

3. Pause

4. Stop

5. Mute

6. Mode

7.To next page

8. Insert or Eject the disc.

9. Volume+(adjustment+)

10. Select

11. Volume-(adjustment-)

12. ChangeAngle of unit.

During DISC playback, you can touch the screen to display the following:

Touch it to select the other item .

Touchit for previous.

Touch it to select the other item, it

will display the following as below:

Touch it to select the other item .

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

GOTO

SET

TITLE

SUBTITLE AUDIO

MOD

SEL VOL+VOL-

1 32 4 5 6

8 7912 1011

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

DVD 11-0:44:36

LUD

SWF

POP

11:08

DISC

OSD

TA AF

CLKSWF LUD DSP

RDM INT RPT

Above these operation buttons for DVD setup.

DVD 11-0:44:36

ENT

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

Page 23

ZOOM

DISC Operation

Switching the DVD mode

Touch the MOD section on the touch screen (or press MOD button ) to select the DISC mode, it display like following :

Stopping Play

Touch the screen the range (or press the buttonon remote control .)To stop the unit playback. Touch the section or press button on front panel to start play.

Pause (still picture)

Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .

SWF

Subwoofer Function

touch the SWF section on the screen to switch the Subwoofer function ON and OFF .

LUD

Loud Function

Touch the LUD section on the touch screen to switch the LOUDNESS function ON and OFF .

Zoom Function

Repeatedly touch ZOOM section , the displaying rate can be 2x, 3x, 4x, 1/2, 1/3, 1/4 .

Press the direction keys / / / buttons on the remote control or touch the screen of “ / / / ”section to move through the enlarged picture . Note: During JPEG playback , touch the screen of ZOOM section , the word “zoom 100%” will display,then you can touch and hold (more than 2’s) the / section on touch screen (press briefly the / buttonson remote control) to increase /decrease in size .During the ZOOM mode, use the direction buttons to move the picture up, down, left, right of the direction .

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

Function setup (different thesource thedisplay isdifferent)

MOD

Skipping Track

During DISC playback, Touch the

/ section on the touch screen to skip to next/back one track. (You can also press the “ / ” buttons on front pane to skip to next / back one track.)

During DISC playback, Touch and hold (for about 2 seconds )the / sectionon the touch screen (or press the “ / ” on the front panel and hold for a more than 2’s) the speed of rapid forward/reverse changes according to the disc as follow:

Rapid Forward/Rapid Reverse

DVD/VCD/CD/MP3:

Normal Playback2x 4x 8x 16x

Note :

1. In DVD mode, touch the section continually twice to back one track . (Press the button on the front panel continually twice to back one track .)

2. For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .

Page 24

Selecting The Play Modes

1). Repeat Function

Touch the screen the RPT section (or press longer RPT on remote control) to select REPEATmode as follow :

FOR DVD :

FOR VCD/CD/MP3 :

Touch the screen the RPT section (or press longer RPT on remote control) to select REPEATmode as follow :

1. Continuously repeat at the current chapter/track, when selected REPONE mode .

2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc .

DISC Operation

Note : The button is not available

for .

3/INT

MP3

During the Disc playback, touch the touch screen, it will display the following as below :

REPEATALL

CHAPTER REPEAT ON TITLE REPEATON

REPEAT OFF

REPEAT ONE REPEATALL

RPT

3). INT Function

FOR VCD :

Touch the screen the INT section (or long press the 3/INT button on the remote ).it display will following menu as below :

SELECTDIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

(touch it again to cancel this mode .)

FOR DVD :

Touch the screen the INT section (or long press the 3/INT button on the remote ). it display will following menu as below :

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

SELECTDIGESTTYPE: TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL

(touch it again to cancel this mode .)

FOR CD :

Touch the screen the INT section (or long press the 3/INT button on the remote) to play the previous 6 seconds part of each track/chapter on disc.(touch it again to cancel)

INT

Touch the RDM section ( or press 4/RDM button longer on remote control to play in random.

2). RDM(RANDOM) Function

Each playing, the order is different . (depend on the disc used for VCD). Touch it again to cancel this function . ( the “ ” button is not available .)Note:

RDM

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

MOD

SEL VOL+VOL-

DVD 11-0:44:36

LUD

SWF

POP

11:08

DISC

OSD

TA AF

CLKSWF LUD DSP

RDM INT RPT

Touch the section to select .

RPT

INT

Page 25

DISC Operation

Touch and hold the “ ” or “ ” range on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.)

Note:

DISC Search (GOTO)

Touchthe section,it display will followingasbelow :

GOTO

FOR DVD :

Touch the screen the range (or press on the remote ). Twice,the screen will display the

following message :

GOTO

Title 01/01 Time -:--:--

0:10:36

You can select the item you want to watch throughTIME setting by using numberic buttons . (E.x. 0:10:36)

Use the numberic buttons to input the time directly (E.x. : 00:36)

FOR VCD (With PBC OFF):

Touch the screen the GOTO range (or press GOTO on the remote ). Once, the screen will display the following message :

Disc GoTo --:--

00:36

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

GOTO

SET

TITLE

SUBTITLE AUDIO

Title 01 /01 , Chapter --/15

321

+10

GOTO

AUX Operation

To connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.

3).Younow hear the sound from the external device played back through the loudspeakers .

4).Touch the volume+/- sections on touch screen or press the VOL+/- on the remote to adjust the volume level.

1). Please connect the external device with stereo jack plug the Aux in socket .

2).Touch the MOD section on screen or press the MOD button to select the AUX IN connection.

AUX IN JACK IN PANEL

AUXIN

Ground

Video

Right

Left

Page 26

NOTE:

For CD and MP3,the message will always display on the screen.

SINGLE ELAPSED SINGLE REMAIN

3.Example for MP3: Each time is pressed or touch , the message displayed on screen changes as follows:

OSD

E.Touch or Press for the fifth time: The message on the screen will be cleared for SVCD and VCD.

OSD

SINGLE ELAPSED

TRACK 01/16 0:00:56

SINGLE REMAIN

TRACK 01/16 0:05:10

TOTAL ELAPSED

TRACK 01/16 0:31:36

TOTAL REMAIN

TRACK 01/16 0:36:26

2.Example for VCD/SVCD/CD: A.Touch or Press for first time:OSD

B.Touch or Press for second time:OSD

C.Touch or Press for hird time:OSD

D.Touch or Press for fourth time:OSD

DISC Operation

E.Touch or Press for fifth time: The message on the screen will be cleared.

OSD

TITLE ELAPSED

T 01/01 C 01/38 0:02:06

TITLE REMAIN

T 01/01 C 01/38 3:24:36

CHAPTER ELAPSED

T 01/01 C 01/38 0:02:56

CHAPTER REMAIN

T 01/01 C 01/38 0:04:32

ON-SCREEN DISPLAY FUNCTION

During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below :

1. DVD: A.Touch or Press for first time:OSD

TitleNumber,TotalTitle Number, Chapter Number, Total Chapter Number of thisTitle of the disc currently being played will be shown on the screen, along with the elapsed time.

B.Touch or Press for second time:OSD

C.Touch or Press for hird time:OSD

D.Touch or Press for fourth time:OSD

OSD

Page 27

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

For VCD/CD:

AUDIO

during playback, touch the section of the touch screen or Press

on the remote . It is possible to switch the sound between monaural and stereo sound.

For DVD:

If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.

For VCD:

TITLE/PBCPress button on the remote

control while the disc is playing, you can switch between "PBC on"and "PBC off" mode.

4. Title Menu Function

- During DVD playback, touch the section or press TITLE button on the remote .The title menu is display.

- Touchthe cursor button shown in TV screen, select preferred title by the cursor button and confirmed by touch ENTbutton .

TITLE

DISC Special Functions

DVD/VCD Special Function

During DVD playback, touch the

section or Press ANGLE button on the remote . Each time the button is pressed or touch,number

3. Multi-Angle Function (for DVD Only)

of the angle changes in sequential order.

Notes:

- Theangle number is different

according to the disc.

- Thefunction only work for disc having

scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

During DVD playback. Touch the section on touch screen(or press the SUBTITLE

SUBTITLE

1. Multi-subtitle Language Function (for DVD Only)

Notes:

- Thelanguage number is different according to the disc.

- Some discs only contain one subtitle language.

- When no different subtitle language are recorded, will be displayed at screen left top corner.

on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order.

SUBTITLE

2. Multi-Audio Language Function

For DVD:

During DVD playback , touch the section on touch screen (or press the AUDIO

AUDIO

on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.

Notes:

- Thelanguage number is different according to the disc.

- Some disc only contain one language soundtrack

- When no different language soundtrack are recorded will be display at screen left top corner.

AUDIO

TITLE

LUD

SWF

POP

11:08

DISC

DVD 11-0:44:36

GOTO

SET

TITLE

SUBTITLE AUDIO

Touch to select

ENT

Page 28

Setup

USING THE MENU

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Set TV Display Mode

TV Display

Normal/PS Normal/LB Wide

Normal/LB

GENERAL SETUP

1.TV DISPLAY SETUP

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connectedTV set.

Played back in the PAN& SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)

Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

Select when a wide-screen TV set is connected.

Normal/PS (For 4:3 TV)

Normal/LB (For 4:3 TV)

Wide (For 16:9 TV)

16:9

4:3LetterBox

4:3 Pan Scan

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

LB ON ENG SPDIF/RAW ON ON ON

DOLBY

....GENERAL SETUP PAGE....

Go To General Setup Page

Overview Of The Main Menu

DOLBY

()1 ()2 ()3 ()4

(1).GeneralSettings (2).SpeakerSettings (3).DOLBY Digital Settings (4).Preference Settings

TV Setting

The buttons of the left and right are for selection of setting type . The buttons of the up and down are for selection of the setting program .

The Following Buttons For Entering

The Selection .

Enter

Down Left

Right

Touchto select

1.Touch the section of DVD setup on touch screen (or press the SETUP on the remote .)

2.The SETUPmenu is displayed.

3.Select the preferred item by touch the / / / range on the screen

or by using the / / / buttons .

4.Touch the ENT section on screen or

Press ENTER button on remote to confirm .

SET

ENT

Page 29

Setup

5. CAPTIONS SETUP

Activate the CAPTIONS feature by

selecting ON. And release this feature by selecting OFF.

2. ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear.

4. SPDIF OUTPUT

This is to activate the audio output from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode.

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Set Angle Mar k

ON OFF

Angle Mark

OSD Lang

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Set OSD language

English French German Spanish Italian Portuguese

OSD Lang

English

OSD Lang

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Setup SPDIF

SPDIF OFF SPDIF/RAW SPDIF/PCM

Spdif Output

SPDIF/OFF

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Closed Caption

ON OFF

Captions

GENERAL SETUP

LANGUAGE DISPLAYING SUBTITLES HIDING

3. OSD LANG TYPE SETUP

Touch the / sectionon the touch screen or press the / buttonon the remote to select the preferred OSD language , then touch the ENT section to confirm .

Page 30

Setup

6. SCR SAVER SETUP

Select the SCR SAVERoutput ON/OFF.

7. LAST MEMORY SETUP

Select the LAST MEMORY output ON/OFF.

SPEAKER SETUP

Thisis to activate the audio output from DOLBYAC35.1DOWNMIXto 2channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Selectthe LT/RTto activatethe Dolby surround compatible output. Selectthe STEREOto activatesimple stereo mode.

DOLBY DIGITAL SETUP

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic range of a Doby Digital encoded program. Thereare 8 steps between full compression and off compression.

GENERAL SETUP

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Screen Saver

ON OFF

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y

DOLBY

....GENERAL SETUP PAGE....

Set Last Memor y State

ON OFF

Last Memor y

DOWNMIX

DOLBY

....Speaker Setup Page....

Set Downmix Mode

LT/R T STEREO

DOWNMIX

STEREO

....DOLBY Digital Setup....

Set DRC OFF

DOWNMIXDYNAMIC

DOLBY

FULL

6/8

4/8

OFF

2/8

.....Speaker Setup Page.....

Page 31

Setup

OSD Lang

Preferred Audio Langua ge

English French German Spanish Italian Portuguese

English

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

Audio

--- PREFERENCES PAGE---

1. TV TYPE SETUP

This player can play discs recorded

in either PALor NTSC format. Select NTSC format, when you connected to NTSCTV.Select PAL format, when you connected to PALTV. SelectAUTO format, the player TV output format will according to the DVD disc format .

2. AUDIO LANGUAGE SETUP

Select the preferred AUDIO soundtrack by using the cursor buttons.

3. SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE language by using the cursor buttons.

4. DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU language by using the cursor buttons.

OSD Lang

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

Set TV Standard

PAL AUTO NTSC

NTSC

TV Type

OSD Lang

Preferred Subtitle Language

English French German Spanish Italian Portuguese Off

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

Subtitle

Off

OSD Lang

Preferred Menu Language

English French German Spanish Italian Portuguese

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

Disc Menu

English

Page 32

Setup

5. PARENTAL

Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.

6. PASSWORD

Select the change and press ENTER button. Type the old password (The initial factory code is ) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.

1379

7. DEFAULTS

Select reset to become factory initial setting.

DEFAULTS TABLE

GENERALSETUP

SPEAKER SETUP

DOLBYDIGITAL

PREFERENCES

TV DISPLAY

ANGLE MARK

SPDIF OUPUT

OSD LANGUAGE

CAPTIONS

LASTMEMORY DOWNMIX

DYNAMIC TVTYPE AUDIO SUBTITLE

DISC MENU

PARENTAL

PASSWORD

NORMAL/LB ON

ENGLISH

STEREO

AUTO ENGLISH OFF ENGLISH 8 ADULT 1379

OFF

SCR SAVER

SPDIF/RAM

OSD Lang

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

Set Parental Control

4PG13 5PGR 6R 7NC 17 8ADULT OFF

8ADULT

Parental

--- PREFERENCES PAGE---

OSD Lang

Changed Password

CHANGE

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

CHANGE

Passwor d

OSD Lang

Load Factory Setting

RESET

TV Type Audio Subtitle Disc Menu Parental Passwor d Default

DOLBY

....Preference Page....

RESET

Default

Age control

Page 33

Other Main Operation

Important Note:

To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback.

In USB Playback mode

REPEAT

Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files).To skip to the next or last track, touch or press the or . Press the or buttonsfor Fast Forward or Fast Reverse playback.

play modes are also available by repeatedly pushing until the desired mode is found.

USB Operation

Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.

you can also select the desired item of the USB device The buttons on the remote control, on the device, have the same functions as the touch buttons of this touch screen have .

Changing From DISC to USB Playback Modes

If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touchorpresstheGOTOtoUSB playback.

If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.

Changing From USB to DISC Playback

Modes

If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once.Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode.

Page 34

Other Main Operation

Touch the RPT on the touch screen (or Pressing REPEATbutton on the remote) repeatedly can select two kinds of repeat play mode. REP-ONE: Play the same song over and over again. REPALL: Play all songs in the discover and over again.

Touch the screen, it will display the following as below :

when the parking brake is applied .()

00:56 04:07

003/112

Repeat one

Mp3 Mp3

Mp3

....... .......

woman

new

ton

. Current track(file)(highlighted bar)

. Elapsed playing time of the current

track(

. total playing time. . Operation mode icon. (Play),

(stop), (pause), (forward)

(reverse).

. Current track (file) number/total

number of tracks(files) in the current folder.

not available for JPEG disc)

( not available for

JPEG disc)

. Selected playback mode

1 2

MP3/WMA/JPEG/MPEG4 DISC PLAY

When you insert a disc which contains MP3, WMA or JPEG files, the different file types are detected, and a list of the files are produced, as shown in the diagram below.

Touch the / / / sections on touch screen (or Use / / / on remote control ) to select the item or folder, then touch the ENT section (or press ENTER button on remote) to confirm.

LUD

SWF

POP

11:08

DISC

MP3 10-0:44:36

MOD

SEL VOL+VOL-

Touch repeatedly

MP3 01-0:44:36

ENT

1.Touch the or sectionto skip a track ahead or back.

2. Press the or button to skip a track ahead or back.

Moving To Another Track :

1.Touch longer (more than 2’s ) the “ / ” range for fast forward or fast backward .

2. Press longer the or button for forward or backward .

Fast Forward/Fast Backward

Page 35

Specification

TFT Monitor:

Monitor Screen Size: 5.3 Inch Wide Number of Pixels: 960 X 234 pixels Color System: NTSC/PAL

NOTE: Specifications and design are subject to modification, without notice, due to improvements in technology.

RADIO Section:

For 3 Bands For2 Bands For 2 Bands (Europe) (Europe) (U.S.A.)

FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz 10.7MHz Sensitivity (S/N = 30 dB): 15dBu 15 dBu 15dBu

MW MW AM Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530to1710 KHz IF: 450 KHz 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40dBu 40 dBu 40 dBu

Audio Signal Output: Characteristics: (1)Frequency Response 20 Hz - 20 KHz

(2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Belowmeasurable limits

5-Channel RCAOutput (Front & Rear + 1-Subwoofer)

Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10A Signal System: Compositivevideo 1.0Vp-p 75

Discs Played: (1)DVD-VIDEO Disc

5"(12 cm) single-sided, single-layer

5"(12 cm) single-sided, double-layer

(2)Compact Disc (CD-DA, VIDEO CD)

5"(12cm) disc

Power Output: 80W x 4

Page 36

888-J6002-10S

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

Trouble Shooting

Inserting the disc in reverse direction

Press the RESET button. Front panel is not properly fixed into its place

The car ignition switch is not on

If the power supply is properly connected to the car accessory terminal,switch the ignition key to

"ACC"

The fuse is blown

Replace the fuse

Presence of disc inside the player.

Remove the disc in the player, then put a new one

Insert the compact disc with the label facing upward

The disc is extremely dirty or defective

Clean the disc or try to play a new one

Temperature inside the car is too high

Cool offor until the ambient temperature return to normal

The built-in microcomputer is not operating properly due to noise The antenna cable is not connected

Insert the antenna cable firmly

The signals are too weak

Select a station manually

SYMPTOM CAUSE SOLUTION

Television/video imageappears black-white

The color system is set incorrectly

Please switch to correct color system from menu

No television/video image appears

The unit is not connected to the parking brake detection switch

Make proper connection according to wire connection

“”

The parking brake is not engaged

For safety reasons no television /video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.

The operation keys do not work

The radio does not work

Disc can not be loaded or ejected

No power

No color in picture

Thediscformatisnot accordingto theTV-set used (PAL/NTSC)

Please the television mode of the choice accommodation

JPEG disc can not be played back

No JPEG files are recorded on the disc.

JPEG files are not recorded in a compliant formant

Change the disc Record JPEG files using a compliant application

Change the disc