4
10 R - 02 1011
WARNINGS
When Driving
Keep the volume level Iow enough to aware of
the road and traffic conditions.
CAUTION
In some countries, it's unlawful to operate a
vehicle while video is displayed in the
driver's viewing area. Please always switch
the unit's display to "Font Type Display"
mode by pressing the DISP button while
driving.
For safety reason, the driver should only
enjoy / watch the video while the car is in
parking mode.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause electrical
shorts, fire or other damage.
CAUTION
In order to avoid any accident, the driver
must not watch video while driving. This unit
is designed to not allow watching moving
video while driving. Park your car in a safe
place and engage the ‘PARKING BRAKE
WIRE' before watching moving video.
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give the
interior a chance to cool down before starting
playback.
Use the Proper Power Supply
This product is designed to operate with a 12
volt DC, negative ground battery system (the
regular system in a North American car).
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR BY YOURSELF PLEASE REFER
S E R V I C I N G T O A Q U A L I F I ED
TECHNICIAN.
NOTE:
1. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
TH I S E Q UIPMENT T O RAIN O R
MOISTURE.
2. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERF ER EN CE, USE ONLY THE
RECOMMENDED ACCESSORIES.
3. THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. Patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot
of this player. Failure to follow this may cause
malfunction or permanent damage due to the
precise mechanism of this unit.
CAUTION
THIS MOBILE MULTIMEDIA PLAYER IS A
CLASS I LASER PRODUCT. THIS UNIT USES
A VISIBLE/INVISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION IF
EXPOSED DIRECTLY. BE SURE TO
OPERATE THE MOBILE MULTIMEDIA
PLAYER CORRECTLY AS INSTRUCTED.
E - 1
DISC AND FORMAT SUPPORTS
This unit can play various video/audio format
which stored into Disc/USB or SD card on
Media Player.
The following chart helps you to check if a
disc is supported by this unit, as well as what
functions are available for a given disc type.
Disc format
Digital Versatile Discs (MultiMedias)
Video CDs (VCDs)
DigitalVersatileDiscsRecordable
(MultiMedia+/-R)
DigitalVersatileDiscsRewritable
(MultiMedia+/-RW)
Compact Discs (CDs)
CD Recordable (CD-R)
CD Rewritable (CD-RW)
Audio Format
Playback CD-DA and MP3 or WMA digital
music file on CD-ROM or MultiMedia-
USB or
Memory Card.
Note of MP3 and WMA:
Support Maximum 2000 files
Maximum 30 characters display
Supported Sampling frequencies; 32kHz,
44.1kHz, 48kHz.
Supported Bit-Rates: 64-256 kbps variable bit
rate
ROM or
Unsupported Discs
8 cm Disc
CDV, CDI, CDG,
LD
MultiMedia RAM
Note on Region Code
MultiMedia players and
Have their own
Can play
Region Code numbers.
the disc of al
MultiMedia Video discs
This unit
l
regioncode numbers.
ALL
Disc Maintenance
Before playing, wipe the disc using a clean
cloth, working from the center hole towards the
outside edge.
Never use benzene, thinners, cleaning fluids or
anti-static liquids or any other solvent.
NOTE
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on you handle it and conditions
in the usage environment. Note these
scratches are not an indication of any
problem with the player.
Label side
Up
Do not bend
Video Format
Playback IMAGE JPEG, DVD Video, MPEG4 .
On CD-ROM or Multimedia - ROM or USB or
Memory Card.
Noted of MPEG4
Supported decoding MPEG-4 video definedby
ISO 14496-2 Standard:
1. Simple Profile (SP) and
2. Advance Simple Profile (ASP)
Supported file format: MP4 and .M4a (audio
only)
Never touch
the under side
of a disc
E - 2
Wipe the disc surface
from the
center to the edge.
INSTALLATION
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your customer car audio dealer or a company
suppling kits.
If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
Trim Plate
Disassembly
2
tool
When you stand the unit, be careful
not to damage the fuse on the rear.
Sleeve
Removing the unit
Before removing the unit, release the rear section.
1
Ste p
2
2
To attach the front panel back to the unit
chassis, firstly join the right guide block
hole to the right cylinder (Step ), then
join the left guide block hole and the left
cylinder
(Step ).
Ste p 2
3
4
Control
Panel
Step 1
Trim
Plate
1
2
3
2
18
2m
m
53
1
Bend the appropriate tabs
to hold the sleeve firmly
in place.
m
Screw
Sleeve
3
m
Dashboard
Ste p
To remove the front panel：
1. Press the Panel Release Button．
2. After flipping down the front panel, push rightwards
Ste p
1
( ), then draw the left of the panel ( ).
1
.
Rel ease
Ste p
2
When using the optional stay
Stay(option)
Dashboard
30°
Washer
Sleeve
Install the unit at an angle
of less than 30°.
Screw(4x12mm)
Screw
Nut
Disassembly
tools
Trim Plate
Insert the two disassembly tools, then pull
them as illuatrated so that the unit can be
removed.
When installing the unit without
using the sleeve
Screw
Screw
Bracket
Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
E - 3
CONNECTING THE SYSTEM
About Parking Wire
CAUTION
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
moving video.
NOTE
The Video Blocking system under Parking
Brake NOT ENGAGED only control this
unit's display, This system will not affect the
Video Output thru the rear RCA Video
Output.
TIPS
Be sure to connect Parking Brake connection
lead. ( please see more details on “ Wiring
Diagram.”)
NOTE
If watch moving video from Disc or AV In
source but Parking Brake is NOT
PROPERLY CONNECTED, the video signal
will be blocked by the system and the below
display will be show on TFT:
About The Reverse Wire For
Back Up Camera System
If user connected a back up camera system
to this unit, when the vehicle is in reverse
Gear (Back Up mode), the front in-dash TFT
display will automatically switch to Back Up
Camera Video signal regardless whatever
mode is currently displayed on the front indash TFT.
Tips
Be sure to connect Reverse wire properly.
(please see more details on “ Wiring
Diagram.”)
E - 4
CONNECTING THE SYSTEM
Wiring Diagram
ISO CONNECTO
SOCKET
(See Figure 1)
ISO MALE CONNECTOR
CONNECTOR B
1234567
B
ANTENNA
EXTENDER
CABLE
BLACK
ANTENNA
JACK
L
R
SUB-W OUT
REAR
（NOT INCLUDED）
REAR LINE OUT
RCA TO RCA CABLE
FRONT LINE OUT
BLACK
BACK UP CAMERA IN
OR VIDEO IN
VIDEO IN
AUDIO IN (RIGHT)
AUDIO IN R
AUDIO IN (LEFT)
AUDIO IN L
WHITE
RED
YELLOW
RED
WHITE
L-CH
R-CH
VIDEO OUT
VIDEO OUT
YELLOW
RED
8
WHITE
PINK
PARKING
AMP
（NOT INCLUDED）
RCA TO RCA CABLE
BRAKE ( )
ORANGE
REVERSE(+)
OVERRIDE
WIRE
PINK
SUB-W OUT
Connect to Parking Brake.
2.5m extension wire
Gearbox
Switch
P
R
N
D
2
L
RCA-TO-RCA CABLE
(not supplied)
VCR or MultiMedia
GAME CONSOLE
Brake
Switch
Ground
Reverse gear signal
Connect to Back Lamp Lead +
AMP
or
A
ISO CONNECTOR 4PIN+8PIN
FEMALE WITH MALE TERMINAL
4
CONNECTOR A
Figure 1
8
ISO CONNECTOR WIRING CHART
5 7
PIN
A4
A5
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
WIRE COLOR
YELLOW
BLUE
RED
BLACK
VIOLET
VIOLET/BLACK
GREY
GREY/BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
FUNCTION/LABEL
BATTERY(+)
CONNECT TO SYSTEM CONTROL
TERMINAL OF THE POWER AMP OR
AUTO ANTENNA RELAYCONTROL
TERMINAL(max 150mA 12VDC)
IGNITION(ACC)
GROUND
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
LEFT FRONT SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
WOOFER
SUB
E - 5
THE FUNCTIONS OF MAIN UNIT
4
1
2
11
5
3
6
7
10
8
9
17
16
No.
1
2
3
4
5
Item
(RELEASE)
MENU
INFO
ENCODER
VOLUME
BAND
SUB-W
FUNC
(FUNCTION)
XBS
/
13
Decriptions
Press this button to open the control panel.
Press this button to access into the SystemMenu mode.
Under RDS mode, press repeatedly to view RDS received
information.
Under MultiMedia playback mode, press repeatedly to view play
information: Title--->Chapter--->Play time
Rotate the Encoder Volume Knob to increase and decrease the
volume. ( The Maximum volume level is “46”.)
Under Tuner mode, short press this button to change between
BAND FM1, FM2, FM3, AM1(MW1) or AM2 (MM2) .
Under Media playback mode, short press this button to Pause/
Resume Play the music.
Press and hold this button to turn On/Off the subwoofer function.
Press this button to enter into the Function mode.
Hold & press this button to turn On/Off the Bass booster function.
1415
12
E - 6
THE FUNCTIONS OF MAIN UNIT
6
7
8
9
10
11
CLOCK
DIAL
TRANSFER
MUTE
POWER
LIST
EQ
TUNE UP/DOWN
FILE UP/DOWN
FAST BACKWARD
/ FORWARD
SOURCE
ESC
DIM
Press this button to view the Clock, press this button again
to return to previous mode.
Under the Bluetooth Handfree mode, short press this button
to answer an incoming call.
Under the Bluetooth Handfree mode, long press this button to
enter into call Tansfer back to Mobile Phone.
Short press this button to turn Mute or restore volume.
Press this button or any other button on the front panel
(except Release button) to turn the unit on. Hold & press this
button again to turn the unit off. .
Under tuner mode,press this button to stored
station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the DVD/MP4 mode, press this button to list the
searching of DVD Root Menu or Files on the playback mode.
Under the VCD mode, press this button to turn On/Off the
PCB function.
Hold & press this button to select the Preset Equalizer setting.
Under tuner mode, press and hold this button momentarily to
enter into the Auto Seek/ Manual Seek mode.
Under media playback mode, press these buttons to skip a
chapter / track / scene / file.
Under media playback mode, press and hold momentarily to
fast forward / backward the Disc.
Press this button to select different source playback mode:
TUNER / DISC / USB / SD CARD / BT AUDIO / AV IN mode.
Press this button to quick return previous menu or mode.
Hold & press this button to adjust the TFT dimmer High or Low.
Under the Bluetooth Handfree mode, press this button to end
or reject an incoming call.
Show The List of
12
13
EJECT
DISC SLOT
RESET
14
15
16
17
SD CARD
SLOT
USB SLOT
( The USB slot behind the
USB/AV-IN jack door.)
AV-IN JACK
(The AV-IN slot behind
the USB/AV-IN jack door.)
Press this button to eject the Disc.
Insert the disc into CD slot.The CD will begin to play.
User can reset the unit to its default setting. Press this button
by using a ball-point .pen or sharp object
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the SD Card.
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the USB memory stick.
This unit is allowed to connect with external Audio/Video
system such like Digital Camera or Game Console. User
can connect the external A/V system thru the A/V in jack on
front panel.
E - 7
Loading...