Page 1
Page 2
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE
COVER (OR BACK). NOUSER SERVICEABLE PARTS IN SIDE. REFER
SERVICINGTOQUALIFIEDSERVICE PERSONNEL.
The lightening flash w ith arrow head symb ol, w ithin an equi lateral triangle, is
intended the alert the use r to the presence ofuninsulated dangerous voltag e
within the products enc losure that may be of su fficient magnitude to con stitute
a risk of electric shock to pers ons.
The exclamation point within an equilateral triangle is inten ded to alert user to
thepresence of important ope rating and m aint enance (ser vicin g) instructions
in the literature acc ompany ing the appliance.
CLASS 1 LASER PRODUCT
Laser product symbol : l oc ate d on the r ear panel o f the unit, indicat e this pla yer is a c lass
laser product, only use weak l aser and no h azardous radiation o utside o f the unit.
1.Read throughthis instructionmanualbefore installationand use.
2.Before removing the unit,remove the disc fromthe unit first.
3.Do not open the coveror touchany of the componentsexposedout of theunit, only for
qualified technician s.
4.Do not expose the unit t o direct sunlight or ne arby objects that radiate heat to avoid
damage the unit.
5.Do not place the unit in moist and humid conditions.
6.Ple ase ensure t he ventilation h o le s a re not cove r ed to avoid overh eat in g a nd malfu nct ion .
7.Clear th e panel and case wi t h so f t dr y cl o th o nly, do notapply any kind of thinner,
alcohol or spray s.
WARNING : TO REDUC E THE
RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
PRECAUTION
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 3
1. Before Operati on.... ........ ........ ........ ...... ... ....... ........ ........ ........ ....... ... ............ .3
1.1 Glossary................. ........ ........ ...... ... ....... ........ ........ ...... ... ....... ........ ....... 3
1.2 Precautions............................................................................................3
1.3 MaintenanceandCleaning of Discs..........................................................4
1.4 Battery Informa tion o f the Remote Control. ......... .......................................4
1.5 The Remote Control Description....... ....... ... ...... ........ ........ ........ ...... ... ....... 5
1.6 Description of t he Fa ce of th e Front P anel.. ........ ........ ....... ... ...... ........ .......6
1.7 Description of t he Re ar Cabin et. ...................... ........................................7
1.8 Unit Installation ....... ........ ....... ... ............ ... ....... ........ ........ ...... ... ....... .......8
2.Common Operation........ ......... ......................................................................9
3. Radio Operation... ... ....... ........ ........ ....... ... ...... ......... ....... ........ ........ ...... ... ....11
4. Basic Disc, USB or M MC/S D Operat ion.... ... ...... .............................................12
4.1 Begin Playback........ ....... ... ...... ........ ........ ........ ........ ....... ... ...... ........ ......1 2
4.2 PausePlayback.......... ...... ........ .............................................................13
4.3 Stop Playback ......... ........ ........ ...... ... ....... ........ ........ ....... ... ...... ........ ......1 3
4.4 SelectChapter/Track with the UP/DN orthe >>|/|<< Buttons......................13
4.5 SelectChapter/Track with the Number Buttons................... ........ ..............13
4.6 Select Chapter/Track with th e Root/PB C Me nu.... ........ .............................13
4.7 Terminate the Playback..... ........ .............................................................14
5. Adv ance d Disc, USB or MMC/SD Operatio n...... ....... ... ............ ... ....... ........ .....14
5.1 Playback with Speed..............................................................................14
5.2 Playback with Slow Speed ........ ..............................................................14
5.3 Playback with still frame... ........ ..............................................................15
5.4 Playback Repeatedly................ ........ ...... ... ....... ........ ........ ....... ... ...... .....15
5.4.1 One/All Repeat...................................................................................15
5.4.2 A-B Repeat.........................................................................................15
5.5 Playback in Scan Mode..... ....... ... ...... ........ ........ ........ .. ...... ........ ........ .....16
5.6 Playback from a specified C hapt er/Track or a Specified Time............... .....16
5.7 Playback in Random....... ... ....... ........ ........ ....... ... ...... ........ ........ ....... ... ...16
5.8 Playback in Different Angle........ ........ ....... ..............................................16
5.9 Playback in Zoom Mode.... ........ ...... ... ....... ........ ........ ....... ... ...... ........ .....16
5.10 Change the Caption Language......... ....... ..............................................17
5.11 Cha nge t he Audio Langua ge.... ....... ... ...... ........ ........ ........ ...... ... ....... .....17
5.12 Changethe Video Signal System..........................................................17
5.13 Lookover the Playback S tatus. ........ ..... ... ........ ........ ........ ...... ... ....... .....17
5.14 Program Playback.... ............ .. ........ ........ ........ ...... ... ......... ...... ........ .....18
5.15 Playback the Picture CD i n JPE G For mat... ......... ...... ........ ........ ....... ... ...18
5.16 Mp4 OPERATION................... ...... ... ......... ...... ........ ........ ....... ... ...... .....19
5.17 ESPand Function..... ........ ........ ...... ... ....... ........ ........ ........ ....... ... ...19
5.18 USB and MMC/SD Reader Op eratio n.. ........... ........................................19
5.19 DVD System Menu Setup Operation......... ........ ....... ... ...... ........ ........ .....19
5.20 Parental Control..... ........ ....... ... ...... ........ ........ ........ ........ ........ ....... ... ...23
5.21 Region Code.......... ........ ....... ... ...... ........ ........ ........ .. ...... ........ ........ .....24
6
7.TroubleShooting........... ... ...... ........ ........ ........ ..... ... ........ ........ ........ ...... .. .....27
8. Specifications.. ...... ........ ........ ....... ......... ...... ... ....... ........ ........ ....... ... ...... .....28
Contents
ID3
. Bluetooth Hand free System(Option)............... ....... ...... ........ ...... ...... ...... .......25
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 4
1. Before Operation
1.1 Glossary
PBC (playback control)
It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0
formatused for the playback control. For the discs containing PBC, It can
playbackinteractivesoftware with the menu displayed on monitor.And if the
disc containstill images, it can playback high definitionof still images.
Title
Generally, the title is the important part of DVD disc. for example, the
theme part of movie is title 1, the part described how to make movie is title
2, the cast is title 3, etc. Every title contain a serialnumber that is easy to
lookup.
Chapter
Atitle can be divided into several blocks, so that every blockcan be operated
as a unit, the unit is called chapter.The chapter contain a unit at least.
Trac k
It is the biggest componentof VCD. Generally, every song ofkaraoke disc
is a track.
1.2 Precautions
Safety
1. Power Source: The unit should be connected to power supply only of
the type described in the operating instructions or as marked on the unit.
2. The unit is designed for negative terminal of the battery which is
connected to the vehicle metal. Please confirm it before installation.
3. Do not allow the speaker wires to be shorted together when the unit is
switched on. Otherwise it may overload or burn out the power amplifier.
4. Do not install the detachable panel before connecting the wire.
5. The protective case is tosafely keep the front panel(see the photo).
1. Do not use thisunit when water and moisture is near it.
2. If moisture forms inside the Lens, it may not operate properly. Tocorrect
this problem, wait about one hour for the moisture to evaporate.
3. If the car interior is extremely hot, do not use the player until the car has
been driven for a while to cool off the interior.
Environment
FRONT PANEL
PROTECTIVE CASE
8. Specifications
General Specification
Power Supply Requirement.................................................. DC 1 2V
Maximum Power Output...................4 x 80W(measur ed at DC 14.4 V)
Dimensions(w x h x d)............................................7”Wx2”Hx6.5”D
DVD Deck Specification
Format....................................DVD/VCD/JPEG/MP4
/MP3/WMA/CD
VideoSystem....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)
Audio System..............................................................24 bit/ 96KHz
Loading System.......................................................... Auto Loading
Mounting Angle.................................................................0 to +/-30
Video
VideoType...................................................................16:9 and 4:3
VideoOutputlevel......................................Composite:1.0 0.2Vp-p
Load impedance: 75 ohms
Horizontal Resolution................................................................500
Audio
Audio Output(Analog audio)..........................................2.0 Vrms
Frequency Re sponse.............................20H z ~ 20KHz(at 1KHz 0 d B)
S/N Ratio(Audio)............................................. 90dB
Separation..............................................................................50dB
Radio
FM Section
Frequency range..............................................87.5MHz - 107.9MHz
Usable sensitivity......................................................................3uV
I.F Frequency....................................................................10.7MHz
AM Section
Frequency..........................................................530KHz-1710KHz
(AVI,ASF,WMV,
MPEG-1,MPEG-2,MPEG-4)
Specification
Specification
(at 1KHz 0 dB)
Specification
+0
-1.0
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 5
1.3 Maintenance and Cleaningof Discs
Disc Maintenance
1. To h
1.
Do not use petrol, thinner, commercial cleaner or anti-static spray used for
plastic LP to wipe disc.
keep the disc clean, andle the disc by its edge, do not touch the disc
surface of the play side.
2. Do not stick paper or tape on the disc.If there is anything on the disc surface,
wipe it up with a soft cloth before using.
3. Do not expose the disc to direct sunlight, or nearby heat sources such as
caliduct, or leave it in a car parkedin direct sunlight where there can be a
considerable rise in temperature.
4. Put the disc inside disc case to keep temperature after finishing playback.
Before playing, wipe the disc with a clean cloth. wipe the disc outwards from
the disc center.
2.
Disc Cleaning
1.4 BatteryInformation of the Remote Control
Replace Batteryin the Remote Control
Noteaboutthe Battery of the Remote Control::
1.
3.Do not short the battery.
4.Donot throw the battery into fire.
5.Toavoid the risk of accident, keep the battery out of reach of children.
1.Before using the remote control for the first time, pull the insulating
sheet out of t he rem ote contr ol a s the direction indicated by the
arrow.(seefig.1)
2.Press the mo vable bloc k h old as the direction indicat ed by theAarrow
(Seefig.2),thenpull the battery holder out of the remote c ontrol as
the direction indicatedby the B arrow(see fig.2).
3.Replacetheold battery by a new battery with (+) polarity side upward.
(Seefig.3).
4.Insertthebatteryholdertotheoriginal position in remote control.
(See fig.3).
Improperuse of batterymay cause overheatingor explosion, and could
result in in jury or fire .
2.Battery leakagemaycause damageto the remote control(Battery
Life:6 months with normal use in normal room temperature).
Fig.1
Fig.2
Fig.3
A
B
+sideup
7. TroubleShooting
Please read the u ser ma nual c areful ly be fore us i ng the DVD p layer. If you have a ny trouble
using this player, try to solve the pro blems by the sugge stions ment ioned belo w. If you can
not remove the trouble a fter us ing all the s ugges ti ons, p lease conta ct the c ompa ny or the
technical service cente r aut ho rized by us. For the sake of your safety, please do not o pen the
cover and repair t he pla yer by yourself, if that, it may c ause el ectric shock.
NO PICTURE, SOUND AND INDICATION
* Ensure t hat the power switch is on.
* Ensurethat the power cord is not d amag ed or the fus e is no t blown.
* Ensurethat the power plug is connected to the inlett ightly.
NO SOUND BUT HAVE PICTURE
* Ensurethat the player s aud io out put ha s a good con necti on wit h ampl if i er.
* Checkwhether the audio co nnector isdamaged.
* Checkwhether you have turned d own th e volume.
* Ensurethat you have set th e rightAUDIO setupof the player.
* Ensurethat the audio is not mute d.
NO PICTURE BUT HAVE SOUND
* Ensurethat the player s video output hasagood connection with monitors video input.
* Ensurethat you have turned your TV to the AV input c hannel connecting to your player.
* Checkwhether the video co nnect or is da mage d.
* Ensurethat you have set th e right VIDEO settings of the player.
* Checkthat parking brake w ire is conn ect ed to park in g brak e switc h such tha t wire is grounded
when parking b rake i s appl ied.
BLACKANDWHITE PICTUREOR SCREEN ROLLING
* Ensurethat you have set th e right TV SY STEM (e.g. PAL,N TSC) setting.
FLAWS OF PICTURE OR SOUND
* Checkwhether the setting o f AUDIO is right.
* Checkwhether the disc is scratch ed or staine d.
* Check w hether the AV connector a nd the outpu t terminal is staine d.
* Checkwhether there is condensa tion in side th e Lens . If so, leave the player off for an hour
or so, then try again.
* Checkwhether the installationangle is less than 30.
DISPLAYNODISC OR BAD DISC
* Ensurethat you have put the dis c i n the unit.
* Check whether thedisc is put in the reverseside.
* Checkwhether the disc is d istorte d.
* Checkwhether the disc is stai ned or scr atched badly.
* Ensurethat the disc formatis compatible tothe player.
* Ensure t hat the tempe rature insid e the car is not too high. If so,cool off untilthe ambient
temperature re turns t o nor mal.
* Replace another disc to insert it in to the disc c ompartment.
REMOT E C ON TR OL IS INSENSIT I V E OR DOES NOT WO R K
* Check the batteries of remote control and make surethat theyare powerful and have
good conductivi ty.
* Direct the remote con trol to the IR sensor of the playe r.
* Checkwhether there are some ob stacl es betw een th e remo te control an d IR sens or.
SOME FUNCTION BUTTONS DO NOT WORK
* Turn off the power, thenturn on again.
* Reset the unit to zero, then turn on again.
* Remove the frontpanel from the unit,then install it again and then turn on again.
THE RADIO DOESNOTWORK
* Checkwhether the antenna cable is connected firmly. Or manually tune for a station.
’
’
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 6
1.5 The Remote Control Description
16.SEARCHBUTTON
17.RDM BUTTON
18.RPTBUTTON
19.SUBTITLE/REDIAL BUTTON
20.TITLE/PBC/PAIRBUTTON
21. AN GLE/ST /# BUTTON
22.ZOOM BUTTON
23. AUDIO BUTTON
24.CLK BUTTON
25. A-B BUTTON
26.INTBUTTON
27. EQ BUTTON
28.LOC/SLOW-FWD/* BUTTON
29. MUTEBUTTON
30. STOPBUTTON
31. VOLUME-BUTTON
32. < BUTTON
33. OK BUTTON
34. VOLU ME+ BUTTON
35. BAND BUTTON
36. PROG BUTTON
37. OSD BUTTON
38. LOUD BUTTON
39.TELBUTTON
1.P/N BUTTON
2. MENU BUTTON
3. PO WE R BUTTON
4.^ BUTTON
5.>>| BUTTON
6.> BUTTON
7. |<</CLEAR BUTTON
8.v BUTTON
9. SE L BUTTON
12.10+BUTTON
13. SETUP BU TTON
14. M ODE BUTTO N
15. APS/ H ANGUP BUTTON
10. P LAY/ PAUS E BUTT O N
11.NUMB ER(0~10,+ 10
-10) BUTTONS
4.3 To redial the last phone number dialled
(1) Short press TEL button . It will show a line on LCD.
(2) Short press REDIAL button, It will dial the last phone number.
5. Accept/Reject/End Call
5.1 During ringing, short press TEL button to accept the call
5.2 During ringing, short press HANG UP button to reject the call
5.3 During talking, short press HANG UP button to end the call
Note: During ringing, the phone number appears.
6. Dialling or receiving call at unit sleep mode
When the car audio at sleep mode (Acc on and standby), to execute a dialling
(with mobile phone) or there comes a call, the car audio will temporarily woke up.
7. To transfer the audio of a file played by Mobile Phone to the Car Audio Player
In the connection status between the Bluetooth devices of the Car Audio Player
and a Mobile Phone, if the mobile phone can play audio or video files and support
A2DP, when the Mobile Phone plays an audio or video file(For some Mobile Phones,
you must select Play by BT firstly), the audio of the playing file will be transferred
to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, the
functions of the >>|, |<< , PLAY/PAUSE , EJECT, MUTE, EQ, LOUD, VOL and SEL
buttons are the same as one in disc mode(no fast forward/backward functions for
the >>|/|<< buttons). The other buttons available in disc mode are not available.
1
2
3
4
5
6
7
9
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
39
36
37
38
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 7
1.6 Description of the Face of the Front Panel
2
The figure of the Unit Chassis Fa cet After remo ving the Front Panel
24
1. POWER/MUTE BUTTON
2. DISC SLOT
3. RELEASE BUTTON
4. MODE
5. AV IN SOCKET
6. SEL BUTTON
AND VOL KNOB
7. SMALLMONITOR
8. IR REM O T E SENSOR
9. BAN D/T EL BU T TON
10.UPANDDNBUTTONS
11.EJECT BUTTON
12. 1/P LAY/PAU SE BUT TON
13. 2/INTBUTTON
14. 3/RPT BUTTON
15. 4/RDM BUTTON
16. 5/-10BUTTON
17. 6/+10 BUTTON
18. USB SOCKET
19. RESET BUTTON
20. APS/HANG UP BUTTON
21. EQ BUTTON
22. CLK BUTTON
23. MICROPHONE
24. CARD SLOT
25. LED Indicator
11
19
25
6. BLUETOOTH HANDFREE SYSTEM(Option)
1. Pairing and connection
1) Turn on the Bluetooth mode of the mobile phone;
3) For some mobile phones, they can automatically connect with the BT device of the
car audio system after pairing is ok; for some mobile phones, they need to select the
paired BT device and press the CONNECTION button . When connection is ok, the
LCD of the car audio system will show LINK OK.
* when pairing is failed, long press the MODE button on the front panel or PAIR button
on the remote control to enter pairing mode,then the LCD will displayPAIRSTAR,
then pair and connect with mobile phone again.
*
2.
In the connection status, findthe paired and connected Bluetooth Device, then press
the disconnection button to disconnect.
In the disconnection status, find the paired and disconnected Bluetooth Device, then
press the connection button to connect.
3. In the connection status: Mobile phone transfers to the car audio whenever a dialling
takes place; Mobile phone transfers to the car audio whenever receiving a call.
4. Dialling when in connection status
4.1 Dial with the mobile phone directly.
4.2 Dial with remote control with the following procedures:
(1) Short pressTEL button, then a line will appear on LCD.
(2) Input telephonenumber with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
(3) Short pressTEL to execute the dialling.
2) Select the item of Finding the BLUETOOTH Device and press enter. Once the device
and unit are paired, the unit will display the name of the device. Select the device and
press enter, and the unit will ask for a password which is 0000. After entering 0000,
press enter and after the pairing is complete the unit will display "Pairing is OK".
In Disc mode, press and hold the PAIR button for 3 seconds to enter Pairing mode.
Using the mobile phone for connecting and disconnecting.
13
Thefigureofthefrontpanel
21
23
13
4
5
6
10
7
9812
14
15
16
17
18
20
22
3.2” TFT
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 8
1.7 Description of the Rear Cabinet
Connecting the parking br ake line to the parking brake system built in the car
Parkingbrake
Parking brake switc h
(insidethe car)
To metallic bodyor chassis of the car
The Description of the Fixed ISO Female Connector
CONNECTORA
1.
2.
3.
4. Memory +12V(yellow)
5. AutoAntenna(blue)
6.
7. 12V (To Ignition Key)(red)
8. GROUND(black)
CONNECTORB
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front RightSpeaker(+)
4. Front RightSpeaker(-)
5. Front LeftSpeaker (+)
6. Front LeftSpeaker (-)
7. Rear LeftSpeaker(+)
8. Rear LeftSpeaker(-)
Reversal lineWhite
Parking LineGREEN
Fixing ScrewBolt
Fixed ISO Female Connector
BLACK
RED R
WHITE L
BLACK
FRONT RCALINE OUT
SUBWOOFER
GREY
GREEN
GREY
GREY
RED R
WHITE L
REAR RCALINE OUT
BTAnt enna
Note:1. Parking wire must be connected, and the parkin g brake must be engaged in order for the monitor to work
2. Usethe clip end of theGround wire providedby manufacturer toc onnect Mounting Screw, use the other
end of the Ground wire toco nne c t the negativ e pole of the power source. Otherwise , the video on screen
may flaches.
Parkingbrake wires(Green)
5
Q: Why does the unit display REGION ERROR after inserting disc into
disc compartment ?
A: Because the DVD player and disc has respective region code. If the
regioncodes of them do not match with each other, the DVD player
can not play the disc.
Appendix:The region code of DVD:
The Motion PictureAssociationofAmerica (MPAA) divided the world
into 6 regions, and gave every region a code, namely region code. The
region codes and the countries o r areas represented by the region codes
areas follows:
Region 1: America, Canada, East-Pacific Inlands;
Region 2: Japan, West Europe, North Europe, Egypt, SouthAfrica, Middle
East;
Region 3: Taiwan, Hong Kong, South
Korea, Thailand, indonesia, etc.;
Region 4:Australia, New Zealand, Central South America, South Pacific
Inlands;
Region 5: Russia, Mongolia, Indian Peninsula, MiddleAsia, East Europe,
North Korea, North Af rica, North-westAsia etc.;
.21 The Region Code
South-east Asian countries include
Region 6: China mainland.
GRAY
USB LINEIN
GRAY
VIDEO OUT
YELLOW
BLACK
YELLOW
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 9
1.8 UNIT INSTALLATION
INSTALLATION INSTRUCTIONS
TOBOOS T UPTHE CAPABILITYOF
ANTI-JAMMING, PLEASE FIX THE
METALSTRAP ONTHE METAL
CONNECTEDTO THECHA SSIS OF
THE CAR.
METALSTRAP
DASH BOAR D
SLIDING METAL HOUSING
TODRAWTHE CHASSISOUT OFTHE
SLIDINGMETALHOUSING,INSERT
THELEFTAND RIGHTKEYPLATES
INTOTHE TWO SIDES OF CHASSIS.
FRONT PANEL
PLASTICTRIM OUT
UNITCH ASSIS
SELECTTHE PROPERTABS
OF THE SLIDIN GMETA L
HOUSINGTO FIXT HE
SLIDI NGM ETALH OUSING.
NOTE
REM OVET HEDE CKT RANSPORT
SCREWSBEFOREINSTALLINGIT.
THEUNITINSTALLATIONIS ANTI-THEFTONE.THEUNIT
CHASSIS W EARSA SL IDING METALHOUSIN G. FIRSTLY
CONNECT T H E POWER LIN ES, SPEAKER L I NES AND
AUTO ANTE NNAAC CORDIN GTO MANU ALRE QUIREME NT,
THEN IN STALLT HESL IDING METAL HOUS INGI NA CAR
ACCORDI N GTO THE DIAGRAM.
REMOVETHESLIDINGMETALHOUSING
EJECTBUT TON
RESETBUTTON
5.20 ParentalControl
A:Thi
!
,.
The disc movie ca n be desig ned as tha t t he DVD pla yer will pl
s is because the movie you are playing was rated with the Parental Control,
andthecurrent rating level of DVD player is lower than the current disc. You
must input right pas sword and enter it to entry Parenta l C ontrol setup menu and
thenset a equal or higher rating level than one of current disc. So that you can
playback the disc.
* If you have not changed the passw ord, the factory preset passwordfor theDVD
player
ParentalControl
TheParental Control function of a DVD player can contr ol the playback of movie
rated level in a disc. Youcansetthe DVD player to be a cert ain rating level with
SETUPMENUon screen. If the rating level in t he disc i s higher than one set in the
DVD player,theDVDplayercannotplayback the disc. The rating level setup can
beprotected by the password. Therein, if you select Unlock , the Pa rental Control
functionwillbe invalid
ayback t he different
versionofcontent of a same movie according tothe differentratinglevelsetby
ParentalControl. Depending on the DVD feature of seamless switching described
above,the scenes that are not fitting for children willbe cleared or replaced by the
other fitting scene automatic ally.
All rating levels of Parental Control are as follows:
Unlock
1KidSafe
2G
3PG
4PG13
5PGR
6R
7NC17
8 Adult
NOTE
Q:Whyafter insertingDVDdisc in the disc slot, a dialogue window appears that
askstoinput a 4 digits password?
You must change the Parental Control setting to higher rating
level.
is 0000.To change the password you should input thecurrent password
andtheninput the new password 2 times.
andall level DVD rating will be played
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 10
2. CommonOperation
1. To turn on/offthe unit
Underpower off mode, press the POWER button to turn on the unit.
Underpower on mode,long press the POWER button on the fro nt panel or
briefly press the POWERbutton on theremote control to turn off the unit.
2. To select function modeand switch on/offTFTscreen
Pressthe MODE button to select TUNER, DISC(Afterinsertinga disc), USB
(After inserting a USB storage), Card(A fter inserti ng a MMC or SD card) or
AUXmode.
Longpress MODE buttonto switch off the TFT screen when driving on night
time.Then press one of any buttons to resume it.
Note:This unit has front and rear USB. Only one will w ork at a time.
3. To adjust sound level
Rotate the VOL knob on the front panel or press or hold the + or - button on
the remote control to directly adjust the volume level.
4. To mute sound
Press th e MUTE b utton on th e remote control to turn on /off MUTE mode.
Brieflypressing the P OWER button on the front panel also can turn on/off
MUTE mode.
In MUTE mode, the MUTE mode can be released by pressing the following
buttons:MUTE, VOLor +/-, SEL, MODE.
5. To display and adjustthe clock time
Press the CLK buttonto display clock time on the small monitor o f t he front
panel.
Then long press the CLK button to change the colorof the hourof the c lock,
then rotate the VOLknob on the front panel or press the + or - button on the
remote control to adjust the hour; and then briefly press the SEL button to
change the color of the minute of the clock, then rotatethe VOL knob on the
front panel or press the + or - button on the remote control to adjustthe
minute.
6. To select a preset EQ mode
Pressthe EQ button to select thepreset music equalizer curves: POP, ROCK,
CLAS,FLAT . Thesound effect will be changed.
It is for adjusting the hue of the video output.
It is for adjusting the saturation of the video output.
It is for adjusting the sharpness of t he video output.
It is for selecting your desired sound effect when there is not central speaker
and sub-woofer.Thereare3 mode: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the
item, so it wil l output audio signal with vivid theatre effect.
STEREO:Ifyou choose the item, when outputtingaudio signal with 5.1 channels,
it will output th e left a nd right channels of signal ; when outputting audio signal
with 2 channels, it will output the common 2 channels of stereo signal.
VSS: If you choose the item, when playing a disc recorded with 5.1 channels,
the main channel speakers can output audio signalwith VSS effect.
It is for selecting audio outputmode
LINE OUT: It can linearlycompress the audio signal. So the volume level i s lower.
RF REMOD: It can make the volume level higher.
After selecting the compression mode of LINE OUT, set t he item, so you can
adjust the linear compression ratio. If you set it to be FULL, the Peak-t o-Peak
value of the audio signal is the minimum; if you set it to be O FF, t he Peak-toPeak value is the maximum.
It is for selecting a desired audio output mode for theleft and right ways of signal.
There are 4 modes in all as follows: STEREO, MO NO L , MONO R, MIX MONO.
HUE
SATURATION
SHARPNESS
5.19.5 SPEAKER SETUP
5.l9.6 DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
SPEAKERSETUP
DOWNMIX
DIGITALSETUP
OP M ODE
DYNAMICRANGE
DUAL M ONO
DOWNMIX
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 11
7. To demount the front panel
1) Press the RELEASE button on the front panel to detach the front panel from
the unit;(see fig. 1)
2) Flip down the front panel;(see fig. 2)
3) Hold the right end of the front panel and pull out the right end as arrow direction, then pull out the whole front panel as arrow direction.(see fig. 3)
8. To mount the front panel
1) Insert left end of the fr ont panel first as arrow direction, then push and hook
up the right end of the front panel onto the unit;(see fig. 4)
2) Flip the front panel upward till hearing a clip.(see fig. 5 and fig. 6)
9. To turn on/off LOUD mode
Pressthe LOUD button on the remote controlto turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when
the bass is not enough.
10. To reset the unit
when the display is wrong or the function buttons are not effective or sound
is distorted, press the RELEASE button to detach the fr ont panel from the
unit, then use a needle analogue to press the RESET button to rehabilitate
the distorted program to zero.
11.To adjust the sound equalizer curves
To adjust the sound equalizer curves, briefly and repeatedly press the SEL
button to select the sound equalizer curves of VOL, BAS(w ithout preset EQ),
TRE (without pre set EQ), BAL, FAD, then rotate the VOL knob on the front
panel or press the + or - button to adjust level.
Fig. 1
REL
Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
This item is for selecting the languageof the SYSTEM MENU and all operating
promptinterface displayed during playback.
This item is for selecting a audio language.
This item is for selecting a subtitlelanguage.
This item is for selecting a discmenu language.
there is only ANALOG mode, i.e. SPDIF/OFF, not optional.
It is for selectingyourdesired basic music tone(from low to high).
5.19.2 LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
5.l9.3 AUDIO SETUP
AUDIO OUT
KEY
5
LANG UAGE SETUP
OSD LAN G UAG E
AUDIO L AN G
SUBTITLE LANG
MENU L AN G
AUDIO S E TUP
AUDI O OUT
KEY
VIDEO S ET UP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
.l9. 4 VIDEO SE TUP
BRIGHTNESS
CONTRAST
It is for adjusting the brightness of the video output.
It is for adjusting the contrast o f the video output.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 12
3. RadioOperation
1. BAND BUTTON
In RADIO mode, press the BAND button on the remote control or on the front panel to
select your desired radio band of andAM2,and the word means which
band is selected will be displayed on the small monitor of the front panel.
2. TUNE/SEEK UP/DOWN BUTTONS
In RADIO mode:
1) Long press the UP/DN button on the front panel or the >>|/ |<< button on the remote control
to automatically searchup/down for a available station from the current frequency.
2) Briefly pressthe UP/DN button on the front panel or the >>| / |<< button on the remote control
to manually search up or down with step by step for your desired station from the current
frequency.
3. APS BUTTON
In RADIO mode:
1) When long pressing the APS button, the radio searches from the lowest frequency and checks
the signal strength level until 1 cycle search is finished. And then the 6 strongeststationsare
preset to the corresponding preset number memory bank. The AS operation is implemented in
the each bank of the selected band. When the AS operation is finished, it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all)
2) When briefly pressing the APS button, the radio searches for each preset stationfrom the M1.
When the field strength level is more than thethreshold level of the stop level, the radiois holding
at that presetnumberforfewseconds with releasing mute,and then searches again. After finishing
a circle of searching, it will stop searching on the M1.
NOTE:InFM band, FM1,FM2,FM3is checkedoneata time.
InAM band, is checked one at a time.
4. PRESET STATION[ 1-6 ] BUTTONS
In RADIO mode:
1) Tomemorize the current frequency on the current band, long press any one of the six preset
buttons (1-6) .
2) Torecall the preset memory on the current band, press one of thepreset buttons [1-6] .
5. STEREO/MONOBUTTON
Press the ST button on the remote control to select the STEREO or MONO sound mode for
FM band.
6. LOC BUTTON
1) InRADIO mode, when the signal of the distanceradio station are very weak and the receiving
effect is bad during tuning, check whether there is the word LOC on LCD. Ifthere is the word
LOC on LCD, pressthis button to turn off the LOC function, then tuneagain for thedistance
radio station;
2) In RADIO mode, when the signal of the local radio station are too strong to lead that the
interference to the receiving effect duringtuning, press this button toturn on the LOC function
to display the word LOC on LCD, then tuneagain for the local radio station.
FM1, FM2, FM3,AM1
AM1, AM2
For the DVD System Menu, there are 6 setup pages in all. T hey display as follows:
5.19.1 S YSTE M S ETU P
TV SYSTEM
TV TYPE
PASSWORD
RATING
DEFAULT
This product supports o utput of va rious TV syste ms.
If your monitor has only NTSC or PAL s ystem, the scre en will blink and become
colorless when a w rong TV s ystem is s elected. In this case, press the N/P button
to switch the right TV system to match the TV co lor system.
Thesetup itemis for matching screen size.
4:3 PS: Choose the item when connecting a T V set with 4:3 screen. W hen playi ng
the pictures with 16:9 size, the le ft and right parts of the video will be cut out,
and displayin full screen.
4:3 LB: Choose the itemwhen connecting a TV set with 4:3 screen. When playing
thepictureswith16:9size,thetopandbottompartsoftheTVscreenwillbe
turned into a black s quare respectively.
16:9: Choose the it em when connecting a TV set with 16:9 wide screen.
This set up item is for locking or un lock i ng t he rating level o f the Par e ntal Contr ol.
The defaulted state is locked. The defaulted password is 0 000.
You can set a new password that you like: S elect the PASSWORD item an d then
press the > bu tton to en ter it, then input the original password 0000, and then
press the OK butto n to u nlock it. Press the > button to enter itagain, then input
a new password th at you l ike and then press the OK b utton to m ake it effective.
Before the oth er pe rsons see the Manual, yo u should get t he password in mind
and cut out the part of PASSWORD in the M anual.
Thisitem is for setting a new rating level of the Parental Control.
1. Select the PASSWORD item and then press the > button to enterit, then input
the password mentioned a bove, and then press the OK button to unlock the
settingoftheratinglevelof the ParentalControl.
2. SelecttheRATING item and then pressthe > button to enter it, then use the
direction buttons to select your desired rating l evel, then pres s the OKbutton
to confirm.
3.SelectthePASSWORDitemagainandthenpressthe>buttontoenterit,then
input the password, a nd then press the OK but ton to lockthe new setting of
the rating level o f the ParentalControl.
This it em is fo r making all setup items change back to origi nal statu s.
SYSTEM S ETUP
TV SYSTEM
TV TYPE
PASSWORD
RATING
DEFAULT
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 13
4. Basic Disc, USB or MMC/SD Operation
4.1 Begin playback
1. Press the POWER button briefly to turn on the DVD player.
2
After turning on the DVD player, please turnon the monitor, and ensure that
the video output of the monitor is the video input from the DVD player
connectedwith the monitor.
? Common Question
Q: Thereis not anythingis displayed on TV screen when the DVD player is
turned on. How to solve the problem?
A: Ensure that the TV was set to right video input(not TV channel); for
example,if you make VIDEO1INPUT of TV and DVD player connected
with each other, then you need set TV to VIDEO1.
. Press the RELEASE button to detach the front panel from the unit.
3. Insert a disc into the DISC SLOT(Label s urface up), then flip up the
front panel till hearing a clip.
! NOTE
1. For some discs that are seriously scratchedor poor manufacturing or
recording quality,itmay not play.
2. If the player can not read disc under normal condition, please try to
eject and reload the disc again.
3. Remark:
1) In addition to normal CD and DVD, this unit supports to play CD-R,
CD-R/W,DVD-R and DVD -R/W as well; however, depending on the
conditionsof the recording equipment, recording program or the disc
itself,some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.
2) When dealing with CD-R, CD-R/W,DVD-R or DVD-R/W recording,
too high recording speed may result in poor signal qualityand therefore,
it is recommendable to select as lower as pos sible recording speed.
3. During J PEG playback, pressone of the >/</^/v buttons to change the angle of
viewingpicturethatis displaying asfollows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->D OWN; v : LEFT<-- >RIGHT
During JPEG playback,pressthe PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
* During JPEG playback, the following buttonsare n ot available: SLOW-FWD,
SUBTITLE,TITLE,ANGLE,STEP,AUDIO,RDM,INTandA-B.
* In JPEG mode,the other operations are same as ones in MP3/WMAm ode.
5
1. The root menu will display onthe monitorwhenitbeginsto switch toDISCmode,
then it will automatically p lay the first file.
During playback,press the STOP button to stop playing and return to the root menu.
2. When displaying the rootmenu, press the direction buttons to select your d esired
FOLDER orfile, then press the OK or PLAY b utton to open the FOLDER, or play the
selected file.
Whendisplayingthe root menu, youcan also use the number buttons to select the
serial number of thefile and play the file.
* The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid in this mode.
* The other functionsaresameas ones in DVD disc; but the RPT function issame as
oneinMP3/WMA.
5
There is ESP function for all formats of discs.
In MP3/WMAmode, during playback, t he information of the file name, folder name,
willbe scrolling on the LCDdisplay. As long as th e
current playing musiccontains relevant tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display; otherwise,
theywill not.
5
Power on the DVD player,then insert the USB storage or MMC/SD Card(first flip down
the front panel), and then the monitor will display the root menu of the USB s torage or
MMC/ S D Car d .
All the operations are same asonesof the corresponding format.
When you want to pull out the card, first push it, and then pull it out.
Note:This unit has front and rear USB. Only one will work at a time.
5
1. Pressthe SETUPbuttonon the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in allfor the System Menu. Press the > or < button to select
a desired setup page.
3. Pressthe ^or v button to select an setup item in the selected setup page.
4. Pressthe>buttontoenterthesetupitem.Thenpressthevor^buttontoselecta
desired mode of the setup item, finally press the OK button to c onfirm it .
* Pressthe< button to return to the upper level.
* Press the SETUP button again or use the direction buttons to highlight the item of the
EXITSETUPand th en press the OK button to exitthe SystemMenu.
.16 MP4 Operation
.17 ESPand Function
songs tit le, arti st and album
.18 USB and MMC/SD Reader Operation
.19 T h e DVD S ystem Me nu Set up Oper ation
ID3
MP3 ID3
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 14
4.2 Pause Playback
.3 Stop Playback
.4 SelectChapter/Track with the U P/DN or the >>| / |<< Button
.5 SelectChapter/Track with the N umber Buttons
.6 SelectChapter/Track with the Root/PBC Menu (I f the disc includes the
root/PBC menu)
Inthe state of DVD/VCD/CD/MP3/WMA disc playing, press the PAUSE
button on IR re mo te contro l t o pause t he playbac k, press the PLAY
buttontoresumenormalplayback.
4
In the state of D VD/VCD/MP3/WMA/CD dis c playing, p ress the STOPbutton
once to pause the playback, then press the PLAY butto n to re sume the normal
playback; press the S TOP button twice to full stop the playback, then press
the PLAY b utton to start playback from the beginning of the firstchapter/track.
4
Press the UP/DN butt on on thefront panel or the >>| / |<< button on the
remote control during playback t o select the next or last chapter/track to
playback.
Note:Pressthe UP/DN or the >>|/|<< button multiple times to advance
multiple chapters/tracks f orward or backward.
4
In the state of D VD/VCD(PBC OFF)/M P3/WMA/CD disc play ing, press one
of the 1~9 and the 0/10 number b uttons to d irectly sele ct and play the 1st to
10th track/chapter (the 0/1 0 button is used as the 10 button).
If you want to play the track/chapter th at s s erial number is bigger than 10,
use the 10+, 1~9 and 0/10 button. For example 1, to play the 13th track/
chapter, firstly p ress the 10+ button on ce, t hen press the 3 button. For
example 2, to play the 34th track/chapter, firstly press the10+ button for 3
times, then press the 4 button.(the 0/10 butt on is used as the 0 bu tton)
Note: long pressing the +10 or -10 button can play the next 10 or la st 10
chapter/track(only for MP3/WMA).
4
In the state of DVD discplaying
1. Press the TITLE button on the remote control to display the title list.
2. Press the direct ion bu ttons to select your desi red title, and then p ress the OK
or PLAY button to open the root menu of the selected title.
3. Press the direction buttons to select your desired chapter,finally press the
OK or PLAYbutton to play the se lected chapter.
During playback, pressi ng the MENU button can directly display the root
menu of th e tit le that is play ing.
5
It a l lo ws you to e nte r the order in which you want s o me chapters/track s in
DVD/VCD/MP3/WMA/CD disc to play.
1 Dur ing playback, press the PROG button to enter a program interf ace as
follows:
for DVD discs for VCD/MP3/WM A/CD discs
2 Use the direction buttons to mov e c ursor onto the desired place for inputting
the sequence number.
3 Use the number butt on to input desired sequence number of title/chapter/
track with desired sequ ence.
4 Use the direc tion b utton to move curs or onto Play i tem, then press the OK
buttontoplaytheprogrammed titles/chapters/tracks in programmed order;
only pressing the PLAYbutton also c an p lay the programmed titl es/chapt ers
/tracks in pro grammed order.
* To exi t program playback, first press the STOP butt on, then press the PLAY
buttontoentersequenceplayback; or press the PROG button twice again.
* To r emove the all p rogrammed sequence numbers, move the cursor onto
Clear item, then press t he OK butto n.
* To ch ange t he pr ogramme d s equence, move the cursor onto the item you
want to change, input the desired sequence number.
* DuringVCD playback,ifit is in PBC ONmode,at the same time of entering
the state of program pl ayback, it turns offPBC mode.
5
1. The r oot menu is displayed on the monitor when beginningto switch on DISC
mode.At the time, it plays MP3/WMA file.(the T ITLE or MENU button is not
available).
In the root menu, the left file sorticon is for MP3/WMA file; the middle file sort
icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3
file sort does not e xist, you cannot move cursor onto the file sort icon.
2. Whendisplayingthe root menu,pressthedirectionbuttonsto selectyour
desiredFOLDER, file or file sort icon, then press the OK or PLAYbuttonto
openthe FOLDER, or play the selected file, or play only this sort of file.
When displayin g the root me nu, you can also use the number buttons to
selec t the serial num be r of thefile and play the f il e.
When you select a JPEG f ile sort icon, press the ^ or > butt on to select the
first JPEG file, then press the v button to select the desired JPEG file, finally
presstheOKor PLAY/PAUSE button to display the JPEG picture in fullscreen
from the se le ct ed JPEG pictur e.
.14ProgramPlayback
.15PlaybackthePictureCDinJPEGFormat
PROGRAM
TC TC TC TC
1__:__ 5__:__ 9__:__13 __:__
2
3
4
Play Clea r
__:__ 6__:__10__:__14__:__
__:__ 7__:__11__:__15__:__
__:__ 8__:__12__:__16__:__
PROGRAM
1____ 5 ____ 9____ 13 ____
2
3
4
Play Clear
____ 6 ____ 10____ 14 ____
____ 7 _ ___ 11____ 15 _ ___
____ 8 _ ___ 12__ __ 16 ____
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 15
In VCD mode
1. When s tarting to turn on the PBC function, it will play from the beginning of
the disc till it display the PBC menu on monitor screen if the disc include the
PBC menu.
2. Press the number buttons to select your desiredtrack to play.
In MP3/WMA mode
1. The root menu is displayed on the monitor screen all the time(and the TITLE
or MENU button is not available).
2. Press the direction buttons to select your desired FOLDER, then press the
OKor PLAYbutton to open the FOLDER, and then press the direction buttons
to select your desired file, finally press the OK button to play the selected file.
In CD mode, the TITLE, PBC, MENU buttons are disabled.
4
1. PresstheEJECT button to slide down the front panel, then the disc i n the disc
compartmentwill come out automatically. and then remove the discaway.
2. Long press the POWER button on the front panel or briefly press the POWER
button on the remote control to turn off the DVD player.
5
Duringnormal playback, long press the UP/DN button on the front panel or
the >>|/|<< button on the remote control continuously to fast forwards
or backwards at the following speeds: x2, x4,x8, x20, normal.
During speed playback, press the PLAYbuttonto resume normal playback.
5
During playback , press the SLOW_FWD button to execute the Slow
Forward function.
With each consecutive pressing of the SLOW_FWD button, the playback
speed decreases. The speed levels in Slow Forward as follows:
x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.
.7 Terminatethe Playback
5.1 Playback with S peed
.2 Playback with Slow Speed
. Adv anced Disc, USB or MMC /SD Operation
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5
When playing a DVD disc, press the SUBTITLE button repeatedly to select
the language of the caption or turn off the c aption.(depend on the current
disc)
When playing a VCD/MP3/WMA/CD disc , the button is not available.
5
1. When playing a DVD disc , press the AUDIO button repeatedly on the remote
control to select the desired language type. (depend on the current disc)
2. When playing a VCD disc, press theAUDIO button repeatedly to select the
sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language
function.
3. When playing a CD/WMA/MP3disc, the AUDIO button is disabled.
During playback of DVD/VC D disc, press the BAND(P/N) button on the front
panel or on the remote control repeatedly to change the VIDEO SIGNAL
SYSTEMmode.
5
time of the playing chapter,
the remained time of the playing chapter,the elapsed
the remained time of the playing title,
2. When playing a VCD/CD disc , press the OSD button repeatedly on the
remotecontrol to turn on/off the playback status.Whenit is on, it will
displaythe information such as: the serial number of the playingtrack, the
elapsed time of the playing track, the remained time of the playing track, the
elapsted time of the disc, the remained time of the disc.
3. When playing a MP3/WMAdisc, press the OSD button repeatedly on
the remote control to turn on/off the playback status. When it is on, it will
display the info rmation such as: the serial numb er o f the playing track, the
elapsed time of the playing track, the remained time of the playing track.
.10 Change the Caption Language
.11 ChangetheAudio Language
5.12 Change the Video Signal System
.13 Look over the Playback Status
1. When playing a DVD disc, press the OSD button repeatedly on the
remote control to turn on/off the playback status.When it is on, it will
displaythe information such as: the serial number of the playing title, the
serial number of the playing chapter, th e elapsed
time of the playing title,
etc.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Page 16
Duringslow forward, press the PLAYbutton to resume normal playback.
This function is only for video.
5
If the unit is currently playing DVD/VCD disc, press the STEP button
consecutivelyto display the still frame forward withstep by step.
Press the PLAYbutton to resume normal playback.
5
5
1. In the mode of DVD disc playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REPALL
or REP OFF.
2. In the mo de o f VCD(PBC OFF)/CD disc playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button are not available.
3. In the mode of MP3/WMA disc playback:
Press the RPTbutton to select REP ONE, REP DIR, REP ALL or OFF.
5
Press the button if you want to repeat a s pecific segment on a disc
thatyou define:
1. Press the buttonat a point (A) where you want it to be the start point
of the repeat segment.Press the button again at a point (B) where you
want it to be the terminalpoint of the repeat segment. Then it will play the
segmentrepeatedly.
2. TocanceltheA-B repeat mode and resume normal playback, press the
button for the third time.
.3 Playback with still frame
.4 Playback Repeatedly
.4.1ONE/ALLRepeat
.4.2 A-BRepeat
A-B
A-B
A-B
A-B
Note:
During VCD/MP3/WMA/CDplayback, pointsAand B must be within the
same track.
During DVD playback, pointsA and B can be selected from differentchapters.
5.5 Playback in Scan Mode
5.6 Playbac k from a specified chapter/track or a specifie d time
5.7 Playback in Random
.8 Playback in DifferentAngle
.9 Playback in Zoom Mode
1. When playing a VCD(PBC OFF)/CD disc, press the INT button to play the
previous 15 seconds part of each track on the disc. Press t he INT butt on
again to resume normal playback.
2. When playing a DVD/MP3/WMA disc, the INT button is not available.
1. When playing a DVD disc , press the SEA RCH button to display a interface
and highlight the title item, then usethe number buttonsto input the serial
numberof the title; use the direction buttons to highlight the chapter item,
then use the number buttons to input the serial number of the chapter; you
can still use the direction buttons to highlight the time item, then use the
numberbuttons to input the desired time to start playback; finally press the
OK or PLAYbutton to play the selected chapter or play from the selected
time.
2. When playing a VCD/MP3/WMA/CDdisc , press the SEARCH button to
displaya interface and highlight the track item, then use the number buttons
to input the serial number of thetrack; you can still use the direction buttons
to highlight the time item, then use the number buttons to input the desired
time to start playback; finally press the OK or PLAY button to play the selected
trackor play from the selected time.
Whenplaying DVD/VCD(PBC OFF)/MP3/WMA/CD disc , press the RDM
buttonto switch between RANDOM (ON)/RANDOM OFF.When in RANDOM
(ON) mode, it will play in random.
5
1. When playing a VCD/MP3/WMA/CD disc , theANGLEbutton on the remote
control is not available.
2. When playing a DVD disc , press the ANGLE button repeatedly on the
remote control to view in different angle.(This function is only for the DVD
discs with ANGLE function)
5
In DVD/VCD mode, during playback, press the ZOOM button continuously
to enlarge a certain area of the images on the screen with these multiples:
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Loading...