Boss Audio Systems BV12.1BGT User Manual

Contents

3

Caution
Features and Controls

Power and Mode Selection
ReleasingTheMonitor

Mute Function

Picture Control
Contrast/Brightness/Color/FM

DVD Setup
Setup Menu
General Setup
TV Aspect Ratio

Angle Viewing
OSD Language
Captions
Screen Saver

Last Position memory
Audio Setup
Speaker Setup
Equalizer Settings
Preferences Setup
TVType
Parental

Audio
Subtitle
Default
Password Setup
Password Mode
Password Change

4

6
8

10

12

13

14

15

16

17

19

6

12

17
17
17
18

18

19

19
DVD Functions
Eject
Vol+/Vol-

Mute
Play or Pause

Audio
Stop
Arrows
Setup
Menu
Display
Number Buttons
Subtitle
Title

Slow
Fast Reverse Searching

Fast Forward Searching
Previous

Next
Repeat A-B
Repeat
NTSC/PAL

Angle
PBC

Zoom
GOTo

Connection Diagram
Installation
Disc Information

Troubleshooting
Specifications

20

20

20
20

21

22
23

23

24

25

26

27

20

20
21

21

21
22

23

24

25

25

26
26

27

27

29
30

31
32

33

10

10

10

Turningon The Monitor

11

Selecting an AV mode

13

14

14

15

15

15

15

Remote Control

Monitor/DVD Player

14

SD/USB Functions

28

Caution

Please read and observe all warnings and instructions in this manual
and those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

WARNING

WARNING

CAUTION

The lightningbolt with arrowheadinside in anequilateral
triangle isintended to alertthe user tothe presence of

dangerous voltage within theproduct s enclosurethat may be
of sufficientmagnitude to constitutea risk ofelectric shock to
people.

The exclamationpoint inside anequilateral triangle isintended
to alertthe user tothe presence ofimportant operating and
maintenance (servicing)instructions in theliterature accompanying
the product.

Installation ofall TV monitors
must beout of the driver s
field ofvision.

Do nottry and service these
products yourself, a
qualified servicecenter or
factory servicecenter for all
repairs.

locale

Be carefulnot to drop or
apply underpressure to the
front panelof your video
monitor. If the screen cracks
due tomisuse, your warranty
will bevoid!

Do notmount the product where
it willobstruct the deployment of
the airbagor in an area where it
would affect the driver s ability
to controlthe vehicle. Also be
careful toavoid mounting the
product whereit can become
hazardous duringsudden stops
or inthe event of an accident.

Use extracaution with any liquids
in yourcar.If you or your child
spills anyliquid on these products,
pull yourvehicle to the roadside

and turnthe key off to disconnect
or wipethe products with a towel. Donot
operate theequipment until all liquids have
either evaporatedor you have had the monitor
inspected ata service center by a qualified
technician. Severeharm or danger can result.

Use onlya damp cloth to clean
the screenand use only purified
water onthe cloth. wring out all
excess waterprior to wiping the
screen. Donot use any cleaners
or chemicalsto clean the screen.
In mostcases a dry cloth will do!

P

O
W
E
R

A

V

MEN

U

,

4

,

SPECIFICATIONS

33

DC 12V
4:3
1152x234
NTSC/PALAuto Select
DVD-AV1-AV2
1EA

15.1(L)X13.4(W)X3.3(H)inches

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

Note:This equipment has been testedand has been found tocomply
with the limits for a ClassAdigitaldevice, pursuant to part 15 of the
FCC Rules. These limits are designedto provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses,and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference. In some cases, the user will
be required to correct the interference at his own expense.

Quality installations are best
performed by qualified and
certified installers.

Don t touch the unit if there is
a flash of lightning.Youmay
receive an electric shock.

Do not cover or stop up heater
ducts or vents. It may cause a
fire or receive an electric shock.

Watchingthemonitorforan
extended period of time
without the engine running
may deplete the vehicle s
battery charge.

This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.

CAUTION

Operating Notes

Do not bring magnetic devices
such as credit card or magnetic
card near the magnets.

5

Caution

Troubleshooting

Symptom

Items to Check

Actions to be Taken

Remote controldoes
not workproperly.

Is thepower turned on?

Is theaudio which is connectedwith
the audiocable set to receive
the DVDsignal output?

Is audiocable connected securely?
Is themonitor which is connected

with theaudio cable turned on?
Is theaudio output set inthe correct

position?

Is theremote control facing
the remotesensor?

Is thedistance too far?
Is thereany obstacle in themiddle?
Is thebattery weak?

Check thecar battery capacity.

Select thecorrect input mode forthe audio receiver.
Connect theaudio cable into thejacks securely.
Turn on the monitor connected with the audiocable.
Set theAudio Output to the correct position,

and thenturn on the DVDplayer again by pressing
the POWERbutton.

Point theremote control toward theremote sensor of
the product.

Use theremote control within 15feet.
Remove theobstacle.
Replace withnew battery.

Buttons donot work.

No sound

When a disc is brought from a cold environment to a warm one, there may be moisture
on the the disc, or condensation on the pickup lens. It will affectdiscplayback.

1. Remove the disc from the DVD player.

2.Turn on the power and leave it on for an hour to vaporize the condensation.

32

Moisture or condensation on lens

1.The operating temperature of thisproduct is limited to 14~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30degrees).

4. Do not open the housing and yourself. Refer
servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.

6. Do not cut the car power supply off while adisc is playing. It cancause
damage to the DVD Player.

attempt to make any repairs

Monitor / Player System Components

6

Disc Information

31

Remote Control

Wireless Headphones
(Sold Separately)

Monitor/DVD Player

DVD features

DVD discs provide high-resolution images with high-quality sound. This DVD player
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and
Mp3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRAdiscscannot be played on thisunit. In
addition, a CD or a CD-RWwhich was recorded on specialsoftware cannot be played.

Region code

Your DVD player is designed and manufactured to region management information
that is recorded on a DVD disc. Please check the region code.
1: NorthAmerica 2: Japan 3: Korea and Southeast Asia
4:Australia,Mid & SouthAmerica 5: Russia 6: China

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information).
Don t stick a label or a glue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive residue.
It might result in damage to your DVD player.
Don t put discs in the sunshine.
Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes like a star,aheart, etc. may cause
damage to the player. If a disc is dirty,wipesoftly with a wet cloth and then with a dry
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not
use any type of solvent such as thinner, benzene, commercially available cleaners or
antistatic spray. Toavoid damaging your DVD player, don t use a scratched disc.

Features And Controls

7

Installation

30

EJECT Button

Disc loadingslot

Caution

Do not bring magnetic devices
such as credit cards or magnetic
cards near the monitor.

.

.

.

.

X

SD Input USB Input

AUX Input Jack

R

L

AUDIO

VIDEO

AV2INPUTS

Dome LightButton

POWER Button

AV SelectButton

MENU Button

+/- Buttons

PLAY/PAUSE Button

1. Open the package and check that these items are presents.

INSTALLATIONPLATE

UNIT

SCREWA SCREW B

2. Connect the external compoments to the RCA cable orAVoutput.
(Refer to the connection diagram on page 33)

3.Match the position of installation bracket and
installation plate with screw A.

4.Tightenthe unit with the supplied
screw B.

Features and Controls

8

Connection Diagram

29

CAMCORDER

GAME

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

CAMCORDER

GAME

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

AV Input

(AV 2)

(AV 1)

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

AV

Output

AMP

MENU

POWER

VOL-

VOL+

AV

MONITOR

AV Input

YELLOW

Switched 12Volts

BLACK

RED

Constant 12Volts

Ground

Car domelamp

WHITE

FM ANTENNA

Positive Negative

Trigger Door Trigger Door

Switch Switch

Dome LightTrigger

Remote Control

TurnstheDVDPlayer/Monitoronoroff.

Auto TV (not function in this unit)

DVD AV1 AV2

A/V SELECT

P/N
This button permits you to choose

among Multi, PALand NTSC.

Use to move to the desired menu.

DISPLAY
Press to show elapsed or remaining
time of a chapter or a title.

NUMERIC button
Use when making a selection on the

menu screen.

MODE

RETURN

(not function in this unit)

DVDSDUSB

POWER

1

2

MUTE
Press this button to switch offthe
audio during playback. Press again
to restore the audio.

3

UP/DOWN/RIGHT/LEFT ARROWS

MENU (OSD on monitor)
Press this button to open the on­screen menu system to setup and
control various parameters of the
monitor and DVD player.
UP/DOWN

MENU (DVD menu)

This buttonpermitsyouto view the
menu ontheDVD.

SUBTITLE
Use this button to select the menu
for choosing a subtitle language.

TITLE (Titlemenu)
When a DVD is playing, press this
button to view theTitle Menu.

PBC (VideoCDonly)
Press this button to access the special
Playback Control functions for VCD

2.0 format VideoCDS.

SETUP

Press this button to display the Setup
menu.TheSetupmenuenablesyou
to enter the settings required for the
unit to work properly.

REPEAT
Press this button to change the playback

mode to repeat.

Press this button to return to the root menu.

Use this button to switch between
three modes

9

Name And Function Of Each Part

SD/USB Functions

28

1. When USB or SD is inputed, the monitor will be displayed as shown below. But when
you input USB that the function can notchange into SD state (only the SDis
moving).Andyou can select the desired menu by

2.

pressing the MODE button on the

remote control of monitor.

Use the (arrow and ENTER) buttons to select and set desired settings.

00:00
000/003

00:00 kbps

S

\
..
..

A-B (repeat from A to B)

VOL-/+ button

AUDIO

ENTER

ZOOM

UP/DOWN/RIGHT/LEFT ARROWS

PLAY/PAUSE

GOTO

STOP

SKIPFORWARD/BACK

FAST FORWARD/REVERSE PLAY
Use these buttons to select either fast

forward or fast reverse playback.

Use this button to select the beginning
and end of a track which you wish to have
repeat in playback.

Use to incease or decrease volume level.

Use this button to select one of the
audio soundtracks programmed on a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.

Press this button to confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played on the DVD.

If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you to change
the amount of zoom.

Use thes buttons to navigate the
various menus and screens for the
monitor and DVD systems.

Tostart playback of a disc, press this
button. Press again to pause the
playback. If playback is paused, press
this button to resume playback.

Use to search for a title or a chapter on
your DVD disc.

Press this button to stop the playback
of the current disc.

Use these buttons to skip to the next
or last track, chapter or file on the
disc in the player.

Power And Mode Selection

10

DVD Functions

PBC

[DVD]/[AUDIO]/[MP3]

[VCD]

You can turn the PBC (Play Back Control) function on or off by pressingthis button.
When PBC is loaded, the PBC function is enabled automatically. This function is
similar to selection of DVD title. Please note that this function does not work with
MP3 dics.

Zoom

[DVD]

Some DVDs are programmed to allow you to zoom into
the image, magnifying it. Pressing the ZOOM button
does this in steps, according to the chart to the right.

[VCD]/[AUDIO]/[MP3]

GO TO

The GOTOfunctionallowsyoutobeginplaybackataspecificlocationonthedisc. To
do this, press GOTOandnavigatethescreenwhichfollowstoselectthisplayback
location.

Title

Move to the desired title.

Chapter

Move to the desired chapter.

Audio

Selects the desired audio output.

Subtitle

Select the desired subtitle.

Angle

Watchthedifferent view angle.

TT Time

Totaltime.

CH Time

Chapter time.

Repeat

Sets the repeat play.

Time Display

Watchplaytime.

27

OSD

2X
3X
4X
1/2
1/3
1/4

ZOOM X2

CONDITION

ZOOM X3

ZOOM X4
ZOOM X1 / 2
ZOOM X1 / 3
ZOOM X1 / 4

Off

Menu
Title
Chapter
Audio
Subtitle

01/0201

/ 02

06/6106

/ 61

5.1CH Chinese5.1CH

Chinese

OFF

Bitrate

31Bitrate

31

Title Elapsed0:20:02Title

Elapsed 0:20:02

This button does not function in PBC mode.

This button does not function in this mode.

Mute Function

1. Press the button on the remote control to mute the audio.MUTE

2. Press the button again on the remote control to return to theMUTE
previous volume level.

Releasing The Monitor

Push the release button (located on the front edge of the screen housing) and
lower the monitor. You can also adjust the swivel angle.

Turning on The Monitor

POWER

UNIT

REMOTE CONTROLLER

Make thisarrow in DOWN
direction only.

1. Connect the monitor to external devices.

2. Press the POWER button on either the remote control or the unit once to turn
the power on.

Press the same POWER button to turn the power off.

3.Power on the external devices and play.

RELEASE BUTTON

Power and Mode Selection

11

DVD Functions

Repeat

Pressing REPEAT button changes
the play mode as follows:

[DVD]

OSD CONDITION

Chapter
Title
All

Repeat chapter

Repeat title

All

Repeat off

[VCD]

The REPEAT button doesnot function
when a VCD disc is being played.

Pressing REPEAT button changes
the play mode as follows:

[AUDIO]

OSD CONDITION

Track

All

Repeat single

All

Repeat off

[MP3]

Pressing REPEAT button changes
the play mode as follows:

OSD CONDITION

Repeat One

Repeat Folder

Folder

Single

Repeat folder

All

Random play

Shuffle

Random

Single

Repeat folder onetime

Single play

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSC
and PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to view a scene
from a different camera angle. IftheANGLEfeature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on
the screen. When that occurs, press theANGLE button to see these alternate viewing
angles.

26

Selecting an AV mode

1.Turnthe power ON on the unit and on the external devices.

2. Select the DVD, AV1orAV2 mode by pressing the AV Select button on
the unit or on the remote control.

3. Play the external device.

Picture Control

12

DVD Functions

Prev( )

Press this button to advance the player from the current chapter.to the previous
chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

Press this button to advance the player from the current chapter .to the next chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

Repeat(A-B)

You can set the player to repeat a segment over and over until you cancel it. Todo
this, you mark the beginning of the desired segment (A) and the end of segment (B).
The selected segment will be
repeated automatically until canceled.

[DVD]/[VCD]/[AUDIO]

25

OSD CONDITION

A

AB

Start pointof repeat

Ending pointrepeat function

To adjust CONTRAST,BRIGHTNESS,COLOR or FM press the MENU button until
you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.

Contrast/Brightness/Color/FM

CONTRAST

BRIGHTNESS

COLOR

42

55

50

1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

FM

87.7

(FM function added 87.7 87.9 88.1 88.3MHz)

DVD Setup

Setup Menu-Main Page

When the button is pressed, the setup menu will be displayed as shown
below.Selectthe menu category and make changes according to your preferences.

SETUP

1. Press the button if the disc is playing.STOP

2. Press the button to display setup menu.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again to turn offthe setup menu.SETUP

13

DVD Functions

Fast Reverse Searching( )

Pressing FR button repeatedly changes
the play mode as follow:

[DVD]

OSD CONDITION

FR 2X
FR 4X
FR 8X

2X rewind search
4X rewind search

Pressing FR button
changes the play mode as follow:

repeatedly

[AUDIO]

[MP3]

Pressing FR button
changes the play mode as follows:

repeatedly

FR 16X
FR 32X

PLAY

8X rewind search
16X rewind search
32X rewind search

Play

OSD CONDITION

FR 2X
FR 4X
FR 8X

2X rewind search
4X rewind search

FR 16X
FR 32X

PLAY

8X rewind search
16X rewind search
32X rewind search

Play

OSD CONDITION

FR 2X
FR 4X
FR 8X

2X rewind search
4X rewind search

FR 16X
FR 32X

PLAY

8X rewind search
16X rewind search
32X rewind search

Play

Fast Forward Searching( )

Pressing FF button changes
the play mode as follow:

repeatedly

[DVD]

OSD CONDITION

FF 2X
FF 4X
FF 8X

2X forward search
4X searchforward

Pressing FF button
changes the play mode as follow:

repeatedly

[AUDIO]/[VCD]

[MP3]

Pressing FF button
changes the play mode as follows:

repeatedly

FF 16X
FF 32X

PLAY

8X searchforward
16X searchforward
32X searchforward

Play

OSD CONDITION

FF 2X
FF 4X
FF 8X

2X forward search
4X searchforward

FF 16X
FF 32X

PLAY

8X searchforward
16X searchforward
32X searchforward

Play

OSD CONDITION

FF 2X
FF 4X
FF 8X

2X forward search
4X searchforward

FF 16X

8X searchforward
16X searchforward

24

FF 32X

PLAY

32X searchforward

Play

Go To Speaker SetupGo To Speaker Setup

General Setup PageGeneral Setup Page

TV Display PS
OSD Lang ENG

TV Display PS
OSD

Lang ENG

DVD Setup

General Setup

1. TV Aspect Ratio

In the Setup function calledTVDisplay, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMALL/B
(Letterbox).

Normal/PS4:3PANSCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)

Normal/LB4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)

Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreenTV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)

2. OSD Language

Use this option to set the OSD language.
When selected, change to set the on-screen display
language.

14

Set TVDisplay ModeSet TVDisplay Mode

General SetupPageGeneral SetupPage

Normal/LB
Wides

TV Display
OSD Lang

TV Display
OSD

Lang

PS

Normal/PS

Set OSDLanguageSet OSDLanguage

General SetupPageGeneral SetupPage

TV DisplayTV Display PS
OSD LangOSD Lang ENG

English

DVD Functions

Subtitle(SUB-T)

This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)

[DVD]

OSD

1/2

Title

Slow( )

23

Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.

[DVD]

[DVD]/[VCD]

CONDITION

1/4
1/8

2X slowforward
4X slowforward
8X slowforward

Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
differentspeeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.

1/16

1/2
1/4
1/8
1/16

Play

16X slowforward

2X slowrewind
4X slowrewind
8X slowrewind
16X slowrewind

Play

1/32

32X slowforward

1/32

32X slowrewind

DVD Setup

Audio Setup

15

Go To Speaker SetupGo To Speaker Setup

General Setup PageGeneral Setup Page

Speaker Setup
Equalier
3D Processing

Speaker Setup
Equalier
3D

Processing

DVD Functions

Display

Pressing the DISPLAY on the
remote control changes the play mode as
follows:

button

[DVD]

OSD

CONDITION

Title Elapsed
Title Remain

Chapter Elapsed

Display the Title Elapsed
Display the Title Remain
Display the Chapter Elapsed

[VCD]

Whenever press the button,title chapter
will be displayed as follows:

Pressing the display button displays
information about the current CD on the
screen as follows:

[AUDIO]

OSD CONDITION

Single Elapsed
Single Remain

Display the single elapsed
Display the single remain

Display the total elapsed

[MP3]

Your DVD player will display the counter
automatically when you play the MP3 disc.

Number Buttons

The 0 through 9 number buttons are used to enter the number of the track, the number
of the DVD chapter, the time, the date, etc.

22

OSD CONDITION

Single Elapsed
Single Remain

Display time
Left displaytime

No sign

Chapter Remain

Display Off

Display the Chapter Remaining
No sign

Display Off

TotalElapsed

TotalRemain

Display the total remaining

[DVD]

Select a track by pressing the
corresponding number button.

[AUDIO]

You can select a track in the folder by
pressing the corresponding number button.

[DVD]

OSD CONDITION

SelectTrack:__ Select track no

OSD CONDITION

__:__ Select track no

1. Speaker Setup

Show below are two examples of Audio Setups.

Go ToSpeaker Setup PageGo ToSpeaker Setup Page

General SetupPageGeneral SetupPage

Speaker Setup
Equalizer
3D Processing

Speaker Setup
Equalizer
3D

Processing

Set DownmixModeSet DownmixMode

General SetupPageGeneral SetupPage

Downmix VRS
Front Speaker LRG

Downmix VRS
Front

Speaker LRG

LT/RT
Stereo
VSURR
Off

LT/RT
Stereo
V

SURR

Off

Downmix

Use this function to set the input audio
signal to match your speaker setup.

Front Speaker

Use this function to change the setting
from the factory.

DVD Setup

16

2. Equalizer Settings

Select EqualizerTypeSelect EqualizerTyp e

Equalizer PageEqualizer Page

Rock
Pop
Live
Dance
Techno
Classic
Soft

EQ TypeEQ

Type None None

DVD Functions

Stop( )

In DVD mode, Press STOPtostopplayback.
Toresume playback, press PLAY/PAUSE.If
you press STOPandthenPLAY/PAUSE twice,
the player will begin playback at the first
scene of the movie.

[DVD]/[AUDIO]

In MP3 mode, Pressing STOPwillstop
audio playback. Press PLAY/PAUSEtobegin
playback of the first title on the disc.

the

[MP3]

Menu

Pressing the SETUPbringsuptheDVDdiscmenu.Thecontentofthismenuvaries,
depending on the programming of the disc.

21

[DVD]

OSD CONDITION

1 Time Press Play Key ToContinue

Stop

OSD CONDITION

1 Time Stop Stop

Arrows( / / / )

In addition to navigating the various menus, you can use the arrow buttons to define the area
of the screen you want to enlarge in ZOOM mode.

[DVD]

After pressing STOPbutton,selectthedesiredfolderandsettheconditionbypressing
ENTER button.

Disc Stop

2Time

Setup

Pressing the SETUPbuttonopenstheSetupMenu,whereyoucanmakeandadjustDVD
settings to suit your equipment and preferences.

[MP3]

Set DownmixModeSet DownmixMode

General SetupPageGeneral SetupPage

Downmix VRS
Front Speaker LRG

Downmix VRS
Front

Speaker

LRG

LT/RT
Stereo
VSURR
Off

LT/RT
Stereo
V

SURR

Off

Set FrontSpeakerSet FrontSpeaker

General SetupPageGeneral SetupPage

Downmix VRS
Front Speaker LRG Larege

Downmix VRS
Front

Speaker

LRG Larege

Go ToEqualizer PageGo ToEqualizer Page

General SetupPageGeneral SetupPage

Speaker Setup
Equalizer
3D Prosessing

Speaker Setup
Equalizer
3D

Prosessing

EQ Equalizer Type

In this menu you can choose the desired preset
equalizer mode.

(Choose from Rock, Pop, Live,Dance, Techno,
ClassicorSoft)

Select EqualizerTypeSelectEqualizer Type

Equalizer PageEqualizer Page

Rock
Pop
Live
Dance
Techno
Classic
Soft

EQ TypeEQ

Type None None

DVD Functions

Eject

Audio

Change the audio output format.
(A the disc supports available audio
type.)

vailable only if

20

[DVD]

Changes the audio output format.
(Availableonlyofthediscsupportsavailableaudio
type.)

[VCD]/[AUDIO]

OSD CONDITION

Mute

Mute

Mute off

Mute off

Vol+/Vol-

Use these buttons to adjust the audio output level of the speaker from 0 to 100.

Mute

Press MUTE to turn offtheaudiopartofthe
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.

OSD CONDITION

Play Disc

Pause

Play or Pause( )

When this button is pressed, the disc is ejected. When this button is pressed for more
than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter
difficultlyejectingadisc.

An invalid button press.

[MP3]

OSD

CONDITION

2 Channel

5.1 Channel

1/2:Ac32CHEnglish

2/2:Ac35.1CHEnglish

OSD

CONDITION

Stereo

Mono Left

Stereo

Mono Left

Mono Right

Mix Mono

Mono Right

Mix Mono

Whenever this button is pressed, the mode
switches from pause to play or play to pause.

DVD Setup

Preference

1. TV Type

Choose the proper TV format appropriateto the
monitor you have connected to the player from
the following: NTSC, PALorMulti type.

1. Press the SETUP button duringstop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to TV Type.

4. Press the ENTER button.

5. Press the / buttons to select TV Type.

3. Audio

Use the audio language menu to select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.

1. Press the SETUP button duringstop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Audio.

4. Press the ENTER button.

5. Press the / buttons to select desired
audio language.

17

Subtitle

Preferred AudioLanguagePreferred

Audio Language

Preference PagePreference Page

French
German
Italian

French
German
Italian

Spanish
P

ortuguese
Russian
Chinese

Spanish
Portuguese
Russian
Chinese

TV Type
P

arental

TV Type
Parental

NTSC

English

Default

Audio

ENG

Audio
Subtitle

ENG

Set TVStandardSet

TV Standard

Preference PagePreference Page

Default

PAL
Multi
NTSC

TV Type
Parental

TV

Type

Parental

NTSC

The Parental Control settings limit the player to only play content at or below a certain
movie rating. The ratings systems indifferentcountries vary.Inthe USA, the Motion
PictureAssociationofAmerica(MPAA) rates movies as G,PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.

1. Press the SETUP button whenstop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Parental.

4. Press the ENTER button.

5. Press the / buttons to select desired
parental level.

2. Parental

Audio
Subtitle

ENG

Set ParentalControlSet

Parental Control

Preference PagePreference Page

TV Type
Parental

TV Type
Parental

NTSC

1K

IDSAF
2G
3PG
4PG13
5 PGR
6R
7 Nc17
8ADULT

1

KID SAF

2

G

3

PG

4

PG 13

5

PGR

6

R

7

Nc17

8

ADULT

Default

DVD Setup

Password Setup

1. Password Mode

In the Password setup, you must first enter the current 6-digit passcode, and
then you have the opportunity to change it. The factory defaultpasscode is .
Once you have changed and confirmed the password, press the ENTER button.

136900

2. Password Change

19

Password

Password ModePassword

Mode

Password Setup PagePassword SetupPage

Off

Password ModeOnPassword ModeOn On

Change PasswordChange Password

Password Setup PagePassword SetupPage

Password ModeOnPassword ModeOn On
Password Change

Old Password
New Password
Confirm PWD

OK

Password Setup, which is required for using the Parental Controls settings,
is divided into two modules: Turningonthe Password function, and setting
a Password. The first step isto turn it on inthe Password Mode setting.

Please EnterOld PasswordPlease EnterOld Password

DVD Setup

If you select RESET when inthe DEFAULT settings
mode, all the settings of the Setup Menu will be
returned to the factory defaut settings, except for
Parental Level, Region and Password values.

1. Press the SETUP button whenstop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Default.

4. Press the ENTER button to select Reset.

5. Default

18

Audio
Subtitle

On
ENG

Load FactorySettingLoad

Factory Setting

Preference PagePreference Page

TV Type
Parental

TV Type
Parental

NTSC

Reset

Default

4. Subtitle

In the Subtitle menu, you can select a subtitle
language. Please note that subtitle will only
appear in this language if the disc programming
has included it.

1. Press the SETUP button duringstop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Subtitle.

4. Press the ENTER button.

5. Press the / buttons to select desired
subtitle.

Audio

ENG

Preferred SubtitleLanguagePreferred

Subtitle Language

Preference PagePreference Page

French
Spanish

TV Type
Parental

TV

Type

Parental

NTSC

Default

Japanese
K

orean

Chinese

Russian

Subtitle

Thai
Others

Thai
Others