User’s Manual BCAM50
PLEASE READ BEFORE INSTALLATION
1. This product should be installed in a location that will NOT interfere with any or a
combination of: Driver’s eyesight, Airbags or any other safety restraint system.
2. Keep the product away from strong magnetic fields, which may cause damage to this
product.
3. The MicroSD ™ card is already formatted and ready for use.
4. The SD Card in this product is not intended to store any other files. Promptly back
up important videos and images.
5. When formatting/and or use of the SD card, do not disconnect the power supply, or
insert/remove the SD Card. This will result in data being corrupt and or erased.
6. To prevent electric shock, do not use the device in an area where high moisture or
humidity is present.
7. Do not use the BCAM50 in temperatures above 140⁰F or below 0⁰F.
8. If the vehicle interior is expected to be hot, remove the camera from the mount and
place in a cool area until it’s going to be used again.
9. Only use the dedicated charger and related accessories compatible with this product.
10. Dispose of properly, do NOT dispose in landfill.
Button Description
TOP
BOTTOM
SIDE
1
2
3
4
6
7
8
12
11
10
9
1. Bracket Mount
2. Charge/Power & Sync Port (USB Mini)
3. Reset
4. Microphone
5. MicroSD™ Card Slot
6. “UP” Button
7. Mode Button
8. “DOWN” Button
9. Power
10. Emergency Event Record
11. “M” Menu
12. “OK” Button
Installation
1. Use a lint-free cloth to wipe off dust on the location of the windshield where you want
to install the product.
2. Remove the protective film from the bracket suction cup, and place it on the windshield.
It is recommended the BCAM50 be placed as high and close to center as possible. Take
note, the BCAM50 should not be placed in any place where it might prohibit safety or
restraint systems from operating properly.
3. Attach the BCAM50 to the window bracket.
4. It is recommended to run the wire along the top of the headliner, down the passenger
A-Pillar* and toward the power input. DO NOT POWER ON yet.
5. Power on the BCAM50 and align camera on center.
6. Ensure all the adjustments on the bracket are tight and secure before the vehicle is
moved.
* If the vehicle is equipped with an airbag(s) on the A-Pillar, carefully place the wire
where it will NOT prohibit the airbags from inflating. If you are uncertain or
uncomfortable with continuing the install, seek a professional installer.
Installation (CONTINUED)
Button Functions
Mode
Button
Video Recording
Photo
Playback
Power Button
ON/OFF
ON/OFF
ON/OFF
“M” Button
Recording in progress:
Mute/Voice Recording
Stop Recording: Setting
Setting
Setting
OK Button
Start recording/stop recording
Take a photo
Confirm
DOWN Button
Zoom in
Zoom in
Next file
UP Button
Zoom out
Zoom out
Previous file
Mode Button
Stop Recording: Switch Mode
Switch mode
Switch mode
Emergency Recording
Emergency Recording
Loading...