Boss Audio Systems 725CA User Manual

Page 1

Page 2

CONTENTS LIST

PAGE CONTENTS

2 BUTTONS LOCATION AND FUNCTIONS 3 HANDLING COMPACT DISCS 4 ACCESSORY INCLUDED 5 INSTALLATION 7 DETACHABLE CONTROL PANEL 8 WIRING DIAGRAM 9 BASIC OPERATIONS

10 AUDIO OPERATIONS 11 RADIO OPERATIONS 12 CD OPERATIONS

13 MP3/WMA OPERATIONS 15 REMOTE CONTROL 16 SPECIFICATIONS 17 TROUBLE SHOOTING

Page 3

1. BUTTONS LOCATION AND FUNCTIONS

1. Panel Release Button

2. Mute Button

3. CD EjectButton

4. Audio Button

5. Display Button/ID3 Information Button

6. Local /DistantButton

7. Preset MemoryButtons

8. Mono /StereoButton

9. Scan Button

10. Volume Knob

11. MP3MenuButton& Automatically Store / PresetScanButton

12. Power Button

13. Band/LoudnessButton/MP3 Enter Button

14. TuningUp/Down & Track Up/ Down Buttons

15. RemoteControlReceiver

16. SourceButton

17. PresetEqualizerButton

18. Folder Down/Up Buttons

19. AuxInJack

1. Entriegel-Taste Bedienteil

2. Stumm-Taste

3. CD-Auswurftaste

4. Audio-Taste

5. Display-/ ID3-Taste

6. Local/Distant-Taste

7. Senderspeichertasten

8. Mono/Stereo-Taste

9. Scan-Taste

10. Lautstärkenregler

11. AMSTaste/MP3 Suchlauf Taste

12. Einschalt-Taste

13. Frequenzband-Taste / MP3 Eingabe-Taste

14. Titel AUF/AB- Taste

15. Fernbedienungs-Taste

16. Source-Taste

17. PEQ-Taste

18. Folder Down/Up - Taste

19. Front-Audio-Anschluss

1.Teclapara removero painelfrontal

2.TeclaMute

3.Teclapara ejetaro disco

4.Teclade ajustede audio

5.TeclaDisplay /informação MP3-iD3

6.TeclaLocal/Distante

7.Teclasde memóriade estações

8.Teclaestéreo/mono

9.TeclaScan

10.Controlede volume

11.TeclaMenu ememorização automática(As)/Preset Scan(Ps)

12.TeclaLigar/desligar

13.TeclaBanda /Loudness /MP3Enter

14.Teclasde sintonizaçãode estações/

mudançadefaixasdemúsica

15.Sensordo controleremoto

16.TeclaSource

17.TeclaEqualizador pré-programado

18.TeclaSeleção depastas

19.EntradaAuxiliar

1. Extraccióndelpanelfrontal

2. Silenciamientorápido

3. Aperturadelpanelmotorizado y expulsión deldisco

4. TeclaAudio

5. SeleccióninformaciónDisplay/ID3TAGmuestra

6. BotónDistancia/Local

7. Botonesdeestacionesmemorizadas

8. Botónselecciónmono/estéreo

9. BotónDeBúsqueda

10. BotónDeVolumen

11. MenúdelSistemade Memorización Automática de emisoras / seleccióndememorias

12. Encendido/Apagado

13. SelectorBandas/Bajos/MP3

14. Botóndeselecciónde emisoras & bandademúsica

15. Receptordecontrolremoto

16. SelecciónmodosRadio/CD/Entradaauxiliar

17. Tecladeecualización

18. Botóndeselecciónde carpeta/folder

19. Entradadeauxiliar

1. Bouton DeDéclenchement DuPanneau

2. Bouton D'assourdissement

3. Bouton ÉjectionD'un Cd

4. Bouton DeSélection Audio/ EntréeDe MP3

5. Bouton D'écran/ AffichageD'information SurLes DisquesMP3

6. Bouton Local/distant

7. Boutons DesStations Préréglées(m1 ~m6)

8. Bouton DeLa StéréoDu Mono

9. Bouton DuScanner

10.BoutonDeVolume

11.BoutonDeMenu &Bouton DeStockage DesStations DansLa Mémoire

12.BoutonD'alimentation

13.BoutonDeBande / EntréeDeMP3

14.BoutonDeRecherche DesStations/pistes :En Avant /EnArrière

15.RécepteurDeLa CommandeÀ Distance

16.BoutonDeRégime

17.BoutonDePEQ

18.DossierEnLe Bouton/Vers LeHautLe Bouton

19.AuxAJack

1. TastoRilascioFrontalino

2. TastoMute

3. TastoEject

4. AudioControlla

5. TastoDisplay/ID3(informazioni)

6. BottoneDistanteLocale

7. TastiStazioniMemoriePreimpostate

8. BottonediStereo/Mono

9. TastoScan

10. TastoVolume

11. TastoMenu&AS/PS

12. TastoPower

13. TastoBanda/Forte &Enter MP3

14. Tastosintonizzazionesu/gui& traccia su/gui

15. Destinatariodicontrolloremoto

16. TastoMode

17. Bottonediequilizzatorepreprogrammato

18. BottonediCartellasu/gui

19. EntradaAux

Page 4

2. HANDLING COMPACT DISCS

MOISTURE CONDENSATION

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.

NOTES ON CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the discas follows. Handle the disc by its edge. To keep the disc clean, do not touchthe surface (P.1).

P. 1

Do not stick paperor tape on thedisc(P.2).

P. 2

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car(P.3).

P. 3

Before playing, clean the discs with an optional cleaning cloth. Wipe each disc from the center out (P.4).

NOTES ON DISCS

If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction orruin your discs.

Do not usesecond-hand or rental CDsthat have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers).

There are paste residue. Ink is sticky (P.5).

*******

P. 5

Do not useCDs with oldlabels that are beginning to peel off.

Stickers that are beginning to peel away, leaving a sticky residue (P.6).

P. 6

Do not use your CDs with labels or stickers attached.

Labels are attached (P.7).

P. 7

Do Not Use Special Shape CDs

Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.(P.8).

****

*******

**************

*******

P. 4

Do not use solvents such as benzine, thinner,commercially available cleaners, or antistatic spray intended for analog discs.

P. 8

Be sure to use CDs with disc mark

RECORDABLE

REWRITABLE

Only for this unit.

CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs record on CD-R or CD-RW.

Page 5

3. ACCESSORY INCLUDED

When first unpacking your new head unit, please check first that the package contains all of the items below.Ifsomething is missing,contact the store whereyoupurchased the player.

Owner’s Manual

Owner’s

manual

Warranty Card

Warranty

Card

Remote control

Lithium Battery

Half Sheeve

Insert Key

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (4X12mm)

5. Screw

6. Support Strap

7. Plain washer

Page 6

4. INSTALLATION

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and theunit and system workproperly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with yournearest dealerif installation requires the drillingof holes or other modificationsof the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, likean emergency stop. If installation angleexceeds 30° from horizontal,theunit might notgive its optimum performance.

30°

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air,from heater,orwhere it wouldbe subject to dustdirtor excessive vibration. Be sure toremove the front panelbeforeinstalling the unit.

DIN FRONT/REAR-MOUNT

This unit canbe property installed either from Front (conventional DIN Front-mount) or Rear (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer tothe following illustrated installation methods A and B.

DIN FRONT-MOUNT (Method A)

Installation the unit

182

1. Dashboard

2. Holder After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (4x12mm)

5. Screw

6. Support Strap Be sure to use the support strap to secure the

back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Page 7

Removing the unit

a. Frame b. Insert fingers into the groove in the front

of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards

Trim Plate Installation:

Push the trim plate against the chassis until it is fitted. You must do this before you install the front panel, otherwise it can't be attached.

DIN REAR-MOUNT (METHOD B)

Installation using the screwholes on the sidesofthe unit. Fasteningthe unit tothe factory radio mountingbracket.

and attach it.)

c. Insert the levers supplied with the unit

into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the

screws at 2 places on each side.

2. Screw

3. Factory radio mountingbracket.

4. Dashboard or Console

5. Hook (Remove thispart)

Note: the mounting box, outer trim ring, and half-sleeve are not used for method B installation.

Page 8

5. DETACHABLE CONTROL PANEL (D.C.P.)

Removing The Detachable Control Panel (D.C.P.).

1. Turn the power off

2. Press the D.C.P. release button

3. Remove the D.C.P.

PANEL RELEASE BUTTON

Attaching the DCP

1. Attach the panel at the right side first, with

point B on the main unit touching point A on the D.C.P.(As shown onthe digram).

2. Then pressthe left side ofD.C.P. onto themain unit until a click soundis heard.

CAUTION

DO NOT insert the D.C.P from the left side. Doingsomaydamageit. The D.C.P can easily bedamagedby shocks. After removingit,place it in aprotective case and be carefulnot to drop it or subject it tostrongshocks. When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent damage to the D.C.P, always store itinaprotectivecase after detaching it. The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to damage it by pressing onitwithfingernails,pens, screwdrivers, etc.

Note:

If the D.C.P is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the

Socket

back of the D.C.P.

Page 9

6. WIRING DIAGRAM (20 PIN HARNESS PLUG)

FUSE

SICHERUNG

FUSIBLE

FUSíVEL

FUSIBLE

FUSIBILE

RCA-TO-RCA CABLES

(not supplied)

RCA-TO-RCA-KABEL

(nicht geliefert)

CABLES RCA-TO-RCA

(non fournis.)

CABOS RCA A RCA

(não fornecidos)

CABLES RCA A RCA

(no incluidos)

CAVO RCA A RCA

( non fornito)

AMP

RCA-TO-RCA CABLES

(not supplied)

RCA-TO-RCA-KABEL

(nicht geliefert)

CABLES RCA-TO-RCA

(non fournis.)

CABOS RCA A RCA

(não fornecidos)

CABLES RCA A RCA

(no incluidos)

CAVO RCA A RCA

( non fornito)

AMP

Le fil de l'antenne de la puissance et l'éloignement mettent la conduite sous tension.

Ground verbindet sich mit Bodenendstation oder reinigt nichtgestrichenen Metallteil von Chassis

Le Ground se Connecte au terminal de la terre ou Lave la partie non peinte du métal du chssis

Ground Connect to ground terminal or Clean unpainted metal part of chassis

Terra-Conecte Ao Terminal Negativo Ou A Uma Superficie Metalica (sem Pintura) Do Chassi.

El Ground Conecta a terminal de tierra o Completamente despintó parte metálica de chasis

Il Ground si collega a terminale terrestre di parte di metallo non verniciare pulita di telaio

Treiben Sie Antennenleitung und entfernte Drehungsführung an.

Power antenna wire and remote turn on lead.

Impulse alambre de antena y turno remoto en liderazgo.

Il filodi potenza diantenna e ilremoto accendono comando.

Fio ParaAntena Eletrica.

20-PIN AUDIO/POWERHARNESS (See Figure1)

20-PIN AUDIO/STROM- KABELGESCHIRR

PLAQUE 20 FICHES AUDIO/ALIMENTATION

CONECTOR DE 20 PINOS PARA AUDIO E ALIMENTACAO

CONECTOR DEAUDIO / POTENCIADE 20 PIN

CONNETTORE ISO( vedi figura1)

WHITE

WEISS

BLANC BRANCO BLANCO

BIANCO

L-CH

R-CH

RED/ROT/ROUGE/VERMELHO/ROJO/ROSSO

WHITE

WEISS

BLANC BRANCO BLANCO

BIANCO

L-CH

R-CH

LINE OUT POSTERIORE---GRIGIO

SALIDA DE LINEA TRASERA -GRIS

LINE OUT POSTERIORE---GRIGIO

SAIDA TRASEIRA- CINZA

SALIDA DE LINEA TRASERA -GRIS

SAIDA TRASEIRA- CINZA

BLUE/BLUE/BLUE/AZUL/AZUL/BLU

BLACK/BLACK/BLACK/PRETO/NEGRO/NERO

SORTIE ARRIERE-GRIS

RÜCKANSCHLUSS-AUS GRAU

SORTIE ARRIERE-GRIS

REAR LINE OUT---GREY

VORDERER AUSGANG--SCHWARZ

FRONT LINE OUT---GREY

WHITE

WEISS

BLANC BRANCO BLANCO

BIANCO

AUX IN

RED/ROT/ROUGE/VERMELHO/ROJO/ROSSO

-W

OFER

Memory/Battery Connect to a constant 12 volt source. The radio will not work if this wire is not connected.

Geds/Batterie Verbinden Siesich mit einer Konstanten 12Voltquelle. Das Radio wirdnicht funktionieren, wenn diese Leitungnicht verbunden ist.

Mémoire/Pile Connectez-vous àune source constantedu volt 12.La radio ne fonctionnerapas si cefil n'est pas connecté.

Memória/Bateria Conecte auma fonte constante de 12V. O radionao funcionara se este fionao estiver conectado.

Memoria/Batería Conectea unorigen constantede 12volt. Laradio nofuncionará sieste alambreno estáconectado.

Memoria/ Batteria Collegatevi auna 12 sorgentedi volt costante.La radio non lavoreràse questo filonon è collegato

YELLOW/YELLOW/YELLOW/AMARELO/AMARILLO/GIALLO

RED/RED/RED/VERMELHO/ROJO/ROSSO

Accessory/Ignition - Connect to a switched 12 volt source. Zubehr/ Zündung - verbindet sich mit einer umgeschalteten 12 Voltquelle. Accessoire/ Allumage - se Connecte à une source commutée du volt 12. Acessorio /Ignicao - Conectea uma fontede 12V chaveada. Accesorio/ Ignición - Conecta a un origen conmutado de 12 volt. L'accessorio/ L'accensione - si Collega a una 12 sorgente di volt commutata.

L-CH

R-CH

RCA-TO-RCA CABLES

(not supplied)

RCA-TO-RCA-KABEL

(nicht geliefert)

CABLES RCA-TO-RCA

(non fournis.)

CABOS RCA A RCA

(não fornecidos)

CABLES RCA A RCA

(no incluidos)

CAVO RCA A RCA

( non fornito)

YELLOW YELLOW YELLOW AMARELO AMARILLO GIALLO

ANTENNA CABLE INPUT ANTENNENVERLÄNGERUNGSKABEL CÂBLE D'EXTENSION D' ANTENNE ENTRADA PARACAB O DE ANTENA CABLE DE ANTENA CAVO ANTENNA ESTENDIBILE

BLUE

BLAU

BLEU AZUL AZUL

BIANCO

WHITE

WEISS

BLANC BRANCO BLANCO

BIANCO

LEFTFRONT

LINKEVORDERSEITE

FACEAVANT GAUCHE

FRENTEESQUERDO

PARTEfrontal IZQUIERDA

PARTEanteriore SINISTRA

LEFT REAR LINKE RÜCKSEITE ARRIERE GAUCHE

TRASEIRO ESQUERDO

PARTE POSTERIOR IZQUIERDA

RETRO SINISTRO

20-PIN AUDIO/POWER HARNESS

5 5

3 3

4 4

1 1

2 2

14 14

13 13

11 11

12 12

15 15

Figure 1

1 2 3 4 5 6 7 8

9 10 11 12

13 14 15

16 17 18

19 20

KABELFARBE

GRAU/SCHWARZ

GRAU

VIOLETT

VIOLETT/SCHWARZ

GRÜN

GRÜN/SCHWARZ

7 8

ROT

SCHWARZ

ROT

WEISS WEISS/SCHWARZ

12 13 14

BLAU

GELB SCHWARZ

WEISS

ROT

18 19

SCHWARZ

WEISS

WIRE COLOR

GREY/BLACK GREY VIOLET VIOLET/BLACK

GREEN GREEN/BLACK RED BLACK RED

WHITE WHITE/BLACK

BLUE YELLOW BLACK

WHITE RED BLACK

WHITE

FUNCTION/LABEL

RIGHT FRONT SPEAKER (-) RIGHT FRONT SPEAKER (+) RIGHT REAR SPEAKER (+) RIGHT REAR SPEAKER (-)

LEFT REAR SPEAKER (+)

LEFT REAR SPEAKER (-) IGNITION(ACC) REAR PRE-AMP LINE OUT COMMON RIGHT REAR PRE-AMP LINE OUT

LEFT FRONT SPEAKER (+) LEFT FRONT SPEAKER (-)

POWER ANTENNA BATTERY(+) CHASSIS GROUND

LEFT FRONT PRE-AMP LINE OUT

RIGHT FRONT PRE-AMP LINE OUT

FRONT PRE-AMP LINE OUT COMMON

LEFT REAR PRE-AMP LINE OUT

20-PIN AUDIO/STROM-KABELGESCHIRR

141311 12 15 16

Figure 1

RECHTER VORDERLAUTSPRECHER (-) RECHTER VORDERLAUTSPRECHER (+) RECHTER RÜCKLAUTSPRECHER (+) RECHTER RÜCKLAUTSPRECHER (-)

LINKER RÜCKLAUTSPRECHER (+) LINKER RÜCKLAUTSPRECHER (-) ZÜNDUNG (ACC) RÜCK-PRE-AMP-ANSCHLUSS-AUS RECHTER RÜCK-PRE-AMP-ANSCHLUSS-AUS LINKER VORDERLAUTSPRECHER (+) LINKER VORDERLAUTSPRECHER (-)

MOTORISIERTE ANTENNE BATTERIE (+) GEHÄUSEERDUNG

HINTERER VORVERSTÄRKERAUSGANG

RECHTERVORDERERVORVERSTÄRKERAUSGANG VORDERERVORVERSTÄRKERAUSGANGNORMAL

LINKER RÜCK-PRE-AMP-ANSCHLUSS

WHITE-BLACK/WEISS-SCHWARZ/ BIANCO-NERONOIR-BLANC/BRANCO-CINZA/BLANCO -NEGRO/

WHITE/WEISS/BLAC/BRANCO/BLANCO/BLANCO

GREEN-BLACK/ /VERT-NOIR/VERDE-PRETO/VERDE-NEGRO/VERDE-NEROGRÜN-SCHWARZ

6 6

7 7

9 9

8 8

10 10

16 16

20 20

18 18

17 17

19 19

Pin View

653412

79810

201817 19

Pin View

FUNKTION / ETIKETT

GREEN/GRÜN/VERT/VERDE/VERDE/VERDE

COULEUR DU CABLE

FICHE

GRIS/NOIR

GRIS

VIOLET

VIOLET / NOIR

VERT

VERT/NOIR

7 8

ROUGE

NOIR

ROUGE

BLANC NOIR/BLANC

12 13 14

BLEU

JAUNE NOIR

BLANC

ROUGE

18 19

NOIR BLANC

Conector de 20 pinos para audio e alimentação

BRANCO

VERMELHO PRETO

PLAQUE 20 FICHES AUDIO/ALIMENTATION

Schéma 1

Vue des fiches

FONCTION / MARQUE ENCEINTE AVANT DROIT (-) ENCEINTE AVANT DROIT (+) ENCEINTE ARRIERE DROIT (+) ENCEINTE ARRIERE DROIT (-)

ENCEINTE ARRIERE GAUCHE (+) ENCEINTE ARRIERE GAUCHE (-) ALLUMAGE (ACC) SORTIE COMMUNE ARRIERE PRE-AMP SORTIE PRE-AMP ARRIERE DROITE ENCEINTE AVANT GAUCHE (+) ENCEINTE AVANT GAUCHE (-)

PUISSANCE ANTENNE BATTERIE (+) CHASSIS TERRE SORTIE AVANT GAUCHE PRE-AMPLI SORTIE AVANT DROITE PRE-AMPLI SORTIE AVANT COMMUNE PRE-AMPLI SORTIE PRE-AMP ARRIERE GAUCHE

ALTO-FALANTEDIANTEIRO DIREITO (-) ALTO-FALANTEDIANTEIRO DIREITO (+)

IGNIÇÃO (ACC)

SAÍDAPRE-AMP TRASEIRA(FIO COMUM) SAÍDAPRE-AMP TRASEIRA DIREITA

ALTO-FALANTEDIANTEIRO ESQUERDO (+) ALTO-FALANTEDIANTEIRO ESQUERDO (-)

ANTENA ELÉTRICA

MASSA (FIO TERRA)

SAIDA LINHA PRENTE ESQ

SAIDA LINHA PRENTE DIR. COMUM SAIDA LINHA PRENTE

SAÍDA PRE-AMP TRASEIRA ESQUERDA

GREY-BLACK/GRAU-SCHWARZ/GRIS-NOIR/CINZA-PRETO /GRIS-NEGRO/GRIGIO-NERO

GREY/GRAU/GRIS/CINZA/GRIS/GRIGIO

VIOLET-BLACK/

VIOLETT-SCHWARZ/VIOLET-NOIR/VIOLETA-PRETO

/VIOLETA-NEGRO/

VIOLA-NERO

VIOLET/VIOLETT/VIOLET/VIOLETA/VIOLETA/VIOLA

(-)

CONECTOR DEAUDIO /POTENCIA 20 PIN

Imagen 1

COLOR DE CABLE

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17 18 19 20

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19

ALTAVOZFRONTAL DERECHO (-)

GRIS/ NEGRO

ALTAVOZFRONTAL DERECHO (+)

GRIS

ALTAVOZTRASERO DERECHO (+)

VIOLETA

ALTAVOZTRASERO DERECHO (-)

VIOLETA / NEGRO

ALTAVOZTRASERO IZQUIERDO (+)

VERDE

ALTAVOZTRASERO IZQUIERDO (-)

VERDE / NEGRO

IGNICIÓN (ACC)

ROJO NEGRO

LINEA DE SALIDA PRE-AMP TRASERA LINEA DE SALIDA PRE-AMP TRASERA DERECHA

ROJO

ALTAVOZFRONTAL IZQUIERDO (+)

BLANCO

ALTAVOZFRONTAL IZQUIERDO (-)

BLANCO / NEGRO

AZUL

ALIMENTACIÓN DE ANTENA

AMARILLO

BATERÍA(+)

CHASIS DE TIERRA

NEGRO

BLANCO

SALIDA L. PREAMP FRONTAL IZQUIERD SALIDA L. PREAMP FRONTAL DERECHA

ROJO NEGRO

SALIDA L. PREAMP FRONTAL COMUN

LINEA DE SALIDA PRE-AMP TRASERA IZQUIERDA

BLANCO

IDENTIFICAZIONE PIN

FIGURA 1

COLORE CAVO

GRIGIO/NERO

GRIGIO

VIOLA

VIOLA/NERO

VERDE

VERDE/NERO

ROSSO

NERO

ROSSO BIANCO

BIANCO/NERO

BLU

GIALLO NERO

BIANCO

ROSSO

BLACK

BIANCO

RIGHTFRONT RICHTIGEVORDERSEITE FACEAVANT DROITE FRENTEJUSTO PARTEFRONTALADECUADA PARTEANTERIORE GIUSTA

RIGHTREAR RICHTIGERÜCKSEITE ARRIEREDROIT DIREITOJUSTO PARTEPOSTERIORADECUADA RETROGIUSTO

Vista de los Pin

FUNCI

VISUALE PIN

FUNZIONE

DESTRA

CASSAANTERIORE DESTRA (-) CASSAANTERIORE DESTRA(+) CASSA POSTER. DESTRA(+)

CASSA POSTER. DESTRA(-)

CASSA POSTER. SINISTRA (+)

CASSA POSTER. SINISTRA (-)

ACCENSIONE (TAKE OUT NIEZIONE)

MESSAA TERRA

AMPLIFICATORECASSA POST.

CASSAANTERIORE SINISTRA (+) CASSAANTERIORE SINISTRA (-)

ANTENNA

BATTERIA(+)

MESSAA TERRA

USCITAFRONTALE SINISTRO PRE-AMP

USCITAFRONTALE DESTRO PRE-AMP

USCITAFRONTALE COMUNE PRE-AMP

AMPLIFICATORECASSA POST. SX

Page 10

7. BASIC OPERATIONS

1) PANEL RELEASE BUTTON (REL)

Press this buttonto remove the control panel.

12) POWER ON/OFF BUTTON

Press this buttonto turn on or off the power.

5) DISPLAY BUTTON (DISP)

Press this button briefly, the LCD will display the clock for about 2 seconds, then return to previous display mode.

Clock Adjustment

Under clock display mode, press DISP button until the LCD flashes, press Tuning Up Button to adjust hour and TuningDownButton to adjust minute.

16) SOURCE BUTTON (SOURCE)

Press this button to select Radio and CD modes. The available selections depends on version: Radio CD Player Radio > CD > AUX in

Sub-woofer On/Off

Press SOURCE button for more than 3 seconds to activate or turn off the Sub-woofer output.

19) FRONT (AND REAR PANEL) AUXILIARY INPUT JACKS

This unit features AUX IN line input jacks on both the front (headphone type) and rear (RCA type) panels.

PLEASE NOTE:

These two inputs cannot be used simultaneously. If you have a source unit plugged into the rear panel jack and wish to listen to a portable device (such as an MP3 player) by using the front panel jack, be sure to power off the unit plugged into the rear unit to avoid interference. Similarly, if you have a device plugged into the front panel jack and wish to listen to the unit plugged into the rear panel, be sure to turn off the front panel device.

To select either the front or rear AUX IN device as a listening source, press the SOURCE button to select AUX mode. To cancel AUX IN listening, press SOURCE again.

AUX IN JACK IN PANEL

3.5mm AudioIn Cable (notincluded)

Left Audio

Right Audio

Ground

RESET BUTTON

The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a ballpoint pen or metalobjectwill activate it. The resetbuttonis to be activated forthefollowing reasons:

Initial installation of theunit when all wiringiscompleted. All the function buttonsdo not operate. Error symbol onthe display.

Note: If the unit cannot function normally after reseting please use a cotton swab soaked in isopropyl alcohol toclean the socket ontheback of thecontrol panel.

Page 11

8. AUDIO OPERATIONS

10) VOLUME KNOB

Turn this knob toadjustdesired volume level.

4) AUDIO BUTTON

Press this buttonto select desired audiofunction.

ORDER OF FUNCTION: VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD)

While the selected function is displayed, turn Volume Knob to adjust the level within 5 seconds, otherwise the unit willreturn to volume adjustmentmode.

BEEPS 2ND,BEEP ALL ,BEEP OFF

Press and hold SELECT button to determine how the beep sound is generated when the keys are pressed,using V-UP/V-DN to select the desires settings: BEEP 2ND Beeps only when the second function of the dual function button is selected (long press). BEEP ALL Beeps when any buttons is pressed. BEEP OFF To disable the beep option.

2) MUTE BUTTON (MUTE)

Press this buttonto mute the sound.Pressit again toresume listening.

17) PRESET EQUALIZER BUTTON (EQ)

Press this buttonto toggle the followingEQsettings:

FLAT->CLASSICS->POP M->ROCK M->DSP OFF

At DSP OFFmode, EQ will becontrolledby Bass/Treblesetting.

13) BAND/LOUDNESS BUTTON (BAND/LOUD)

Press the Band/Loudness Button for couple of seconds to switch the loudness on or off. When Loudness is on, displaywillshow 'Loud On' for afewseconds.

Page 12

9. RADIO OPERATIONS

11) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS)

1. PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that it will stay on each station for about 5 seconds.

2. AUTO MEMORY STORE: Press AS/PS button for couple of seconds to enter Auto Store mode, this feature will automatically scan the current band and enter up to 6 strongest stations into the 6 preset memories. To stop Auto Store & Scan, press the AS/PS button again.

7) STATION PRESET BUTTONS (M1-M6)

1. Press these buttons briefly to recall the stored stations in the selected band.

2. Presetting stations manually, Press the BAND button to select the band for the stations to be preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset button at which you want to store the station for at least 2 second. The preset number will appear on the display accompanied by a beep, this indicates that the station has been stored into memory.

13) BAND/LOUDNESS BUTTON (BAND/LOUD)

This a dual function button. Press this button shortly to change between BAND FM1, FM2, FM3 or AM bands. Press this button for couple of seconds to turn Loudness function on or off.

DUAL FREQUENCY SWITCH

Unit is defaulted in U.S.A frequency, if EURO frequency is required, a sharp pen is needed to switch the button on the left side of the chassis to EURO frequency.

14) TUNING / SEEK UP AND TUNING / SEEK DOWN BUTTONS

1. Press these buttons briefly, and the unit will operate in AUTO SEARCH tuning mode, the radio will tune up or down to the next station and remain on that station.

2. Press these buttons for more than 2 seconds, operate as MANUAL SEARCH buttons, under this

mode the tuning frequency will advance up or down rapidly when the button is pressed. If the buttons are not pressed within 3 seconds, they will return to auto search mode.

8) MONO STEREO BUTTON (MO/ST)

When you receive a station, ST on the display will be on. Press this button to enter Mono mode.

9) SCAN BUTTON(SCAN)

Press this button, the radio will tune up to search stations, the available stations will blink and stay on the display for a few seconds.

6) LOCAL/DISTANT BUTTON (LOC)

During station tuning, this button allows you prior to access strong local station only (Local mode), or to access a wider range of using distant mode (DX). When powered on, DX mode will be defaulted automatically; Press LOC button briefly to select Local mode and LOCAL symbol on the LCD will light up for a few seconds.

Page 13

10. CD OPERATIONS

M1) PAUSE BUTTON (PAUSE)

Press this buttonto pause CD play,press again to releasepause.

M2) SCAN BUTTON (SCAN)

Press this button, the first 10 seconds of each track will be played sequentially until this button is pressed again,then normal play willresumeat the currenttrack.

M3) REPEAT BUTTON (REPEAT)

Press this button,the current track willbeplayed repeatedly untilthis button is pressedagain.

M4) SHUFFLE BUTTON (SHUFFLE)

Press this buttonto play all tracksonCD in random.Press again to deactivateit.

14) TRACK UP AND TRACK DOWN BUTTON

Press the Track Up Button to skip to the next track or previous track. Press the Track Down button during playwill return tothe beginning ofthe current track,press it onemore time toskip to previous skip. Press and hold Track Up/Down Button to fast forward or fast reverse. CD player starts playingwhen you release thebutton.

EJECT BUTTON

Press this button to eject the CD from the unit. The receiver will switch to radio mode automatically.

EJECT BUTTON

Page 14

11. MP3/WMA OPERATIONS

Notes :

- An MP3 directory is shown in this manual as D , and an MP3 file is shown as T rack .

- Maximum length of file name : 28 characters.

- Maximum length of directory : 16 characters.

- Supports Multi-Session recording.

- Supports CD, CDR and CDRW.

- Disc written by Packet Write (UDF) is not supported. MPEG1/2/2.5/ Layer 2/3

WMA Version 7/8/9 Sampling frequency

- MPEG1 : 32/44.1/48 KHz

- MPEG2 :16/22.05/24 KHz

- MPEG2.5 : 8/11.025/12KHz

- WMA : 22/32/44/48KHz Sampling But rate

- MP3/WMA : 32~320Kbps & VBR CDROM Mode1/2

ISO9660 Level1/2&Joliet(unicode) Max File/DIR. Count : 255 Max DIR. Depth : 255 Sorting Method : Tree sorting Max File/DIR. Name : 64Byte ID3 V1.0/1.1/2.0/2.3(Max 32Byte)

LOADING DISC

Insert the CD as usual, if it is an MP3 CD, the display will show MP3 T01 then the message

READING will appear , when disc scanning completed, the first track on the first d will play.irectory

NOTE: 1) MP3 ICON turns on when a MP3 disc is playing.

2) MP3 ICON is blinking when under directory/Files search mode.

3) DIR ICON turns on when the playing file is a directory.

NAVIGATING THROUGH AND TRACKSDIRECTORIES

NOTE: MP3 / Track selection can be done by Volume Knob or Tune Up / Down Buttons Both

Directory operations will be described. Please skip this description if your model is not equipped with this feature.

THERE ARE FOUR WAYS TO SELECT YOUR FAVORITE TRACK / DIRECTORY

A) SEARCHING TRACK DIRECTLY

irectory

Under MP3 play mode, press MP3 MENU BUTTON once, the display shows MP3 T* , enter the desired track number directly, then press MP3 ENTER BUTTON to confirm. The distribution of the number are listed as follow:

Number

Button

M3 M4

M6 MODE TUNE DN

TUNE UP

DISP

SEARCH TRACK NUMBER BY USING ENCODER VOLUME KNOB Rotate the VOLUME KNOB to scroll through the numbers, then press MP3 ENTER BUTTON to confirm.

B) SEACRCHING BY OR TRACK NAMEDIRECTORY

(1) SEARCH / TRACK NAME BY USING TUNE UP / DOWN BUTTON

Directory

irectory

confirm when desired track is found.

(D) NAVIGATING THROUGH DIRECTORY BY USING M5/M6 BUTTON

Press directory up (M6) or directory down (M5) buttons to skip the current directory forward or backward by one position. In a multi-level directories disc, the movement will take place at the current level until the last directory is reached. At this point press directory down (M5) again , it will move to the next level of directory.

ID3 TAG

Press DISPLAY button repeatedly to Display ID3 TAG information. If the MP3 file is available with ID3 TAG, pressing the display button repeatedly will show information in the following sequence: SONG TITLE > ARTIST> ALBUM TITLE If any of the ID3-TAG information is not available, pressing the DISPLAY button repeatedly will show information in the following sequence: UNKNOWN SONGNAME> UNKNOWN ARTIST> NO ALBUM TITLE If the MP3 file is without ID3 TAG, pressing the DISPLAY button, & NO ID3 TAG will be displayed. The file name & track number of the MP3 file will scroll repeatedly through the display during the playing of the MP3 file.

Page 16

12. REMOTE CONTROL

OPERATIONS:

Key

1. Power

2. Volume Up/Down

3. ID3/DISP

4.Stereo/Mono

5. Tuning Up/Down

6. LOC

7. Scan

8. Mute

9. Audio

10. Sub-woofer(SUB)/

11. Band/Loud/

12. AS/PS/Menu

13. EQ

14. Numeric Key(1)

()

Source

Enter

(2) (3) (4) (5) (6)

2 3

4 5

13 14

Radio Mode

Power On/Off

Adjust Vol,Bas, Tre,Fad,Bal

Display Clock

Stereo/FM Mono

Tuning/SeekUp/Down

Local/Distant

Station Scan

Mute

Select Vol, Bas, Tre,Fad,Bal

Sub-woofer/ Change to CD/MP3or AUX IN

Band/Loudness

Auto Store/Preset Scan Preset EQ Preset EQ Preset station 1 Preset station 2 Preset station 3 Preset station 4 Preset station 5 Preset station 6

CD Player Mode

Power On/Off

Adjust Vol,Bas, Tre,Fad,Bal

Display Clock

No Function No Function

TrackUp/Down

No Function

Mute

Select Vol, Bas, Tre , Fad, B al

Sub-woofer/ Change to Radioor AUX IN

Loudness

No function

Preset EQ Pause

CD scan Repeat Shuffle No Function No Function

MP3 Mode

Power On/Off

Adjust Vol,Bas, Tre,Fad,Bal

ID3 tag information Display Clock, Numeric key 0*

TrackUp/Down/ Numeric key 8*9*

No Function

Mute

Select Vol, Bas, Tre,Fad,Bal,

Sub-woofer/ Change to Radioor AUX IN/ Numeric key 7*

Loudness/ MP3 Enter

Menu function

Pause

CD scan Repeat Shuffle

Folder Down Folder Up

Page 17

13. SPECIFICATIONS

CD PLAYER

System Usable disc Sampling frequency No ofquantizationbits Frequency Number ofchannels S/N Ratio

RADIO SECTION FM

Frequency Range

Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio

AM/MW

Frequency Range

Intermediate Frequency Usable Sensitivity S/N Ratio

GENERAL

Power Supply Polarity Speaker impedance Power Output

REMARK : Specifications subjecttochangewithoutnotice.

CD PLAYER

System Abspielbare Discs Sampling-Frequenz Anzahl Quantisierungsbits Frequenz Anzahl Kanäle Signalrauschabstand

RADIOTEIL FM

Frequenzbereich

Zwischenfrequenz Nutzbare Empfindlichkeit

Stereotrennung Signalrauschabstand

AM/MW

Frequenzbereich

Zwischenfrequenz Nutzbare Empfindlichkeit Signalrauschabstand

ALLGEMEINES

Stromversorgung Polarität Lautsprecherimpedanz Ausgangsleistung

ANMERKUNG: Technische Änderungen ohneMeldepflichtvorbehalten.

Compact discaudiosystem Compact disc

44.1KHz 1bit 5-20,000Hz 2 stereo 70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz Better than15dBatS/N30dB 25 dBat1KHz 50 dB

530-1710KHz U.S. 522-1620KHz EURO 450KHz Better than45dB 40 dB

DC 11-14V Negative Ground 4 ohms 4x 50Watts

Compact DiscAudioSystem Compact Disc 44,1 kHz 1 bit 5-20.000Hz 2 Stereo 70 dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz

Besser als15dBbeieinem Signalrauschabstand von30dB 25 dBbei1kHz 50 dB

530-1710KHz U.S. 522-1620KHz EURO 450KHz

Besser als45dB 40 dB

DC 11-14V Erde negativ 4Ohm 50 Wx4

CD Player

Sistema: Tipo de disco: Frequência de Amostragem: Conversor D/A: Resposta de frequencia Número de canais: Relação sinal/ruído:

Rádio FM

Faixa de Frequencia:

Frequência Intermediária: Sensibilidade útil: Separação estéreo Relação Sinal/Ruído

AM/MW

Faixa defrequencia:

Frequencia intermediária: Sensibilidade útil: Relação Sinal/Ruído:

Geral:

Alimentação: Polaridade: Impedancia alto-falantes: Potência de saída:

Nota: As especificações estão sujeitas a alterações sem prévio aviso.

CD PLAYER

Sistema: Disco: Frecuencia Muestreo: Cuantificación: Frecuencia: Número decanales: Relación señal/RuidoS/NRatio

RADIO SECCIÓN FM

Rango Frecuencia:

Frecuencia Intermedia: Sensibilidad Útil: Separación estereo: S/N Ratio:

AM/MW

Rango Frecuencia:

Frecuencia Intermedia: Sensibilidad útil: S/N Ratio:

GENERAL

Alimentación: Polaridad: Impedancia altavoces: Potencia de salida:

Nota: Debido alrápidoavancetecnológico,estasespecificacionesestán sujetas acambiossinprevioaviso.

Sistema áudioCD

44.1KHz 1bit 5-20,000Hz 2 estéreo 70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHZ

melhor que15dBaS/N30dB 25 dBat1KHz 50 dB

530-1710KHz U.S. 522-1620KHz EURO 450KHz

Melhor doque45dB 40dB

DC 11-14V Terra negativo 4ohms 50wx4

Compact discaudiosystem. Compact Disc.

44.1KHz. 1bit. 5-20,000Hz. 2 estereo. 70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7Mhz. Mejor que15dBaS/N30dB. 25dB a1Khz. 50dB.

530-1710KHz U.S. 522-1620KHz EURO

450KHz. Mejor que45dB. 40dB.

DC 11-14V. Negativo a masa. 4 Ohms. 4x50W.

LECTEUR CD

Système Disques utilisables Fréquence échantillonnage Nbre dequantisationbits Fréquence Nombre decanaux Ratio S/B

SECTION RADIO FM

Gamme defréquences

Fréquence intermédiaire Sensibilité utilisable Séparation stéréo Ratio S/B

AM/MW

Plage defréquences

Fréquence intermédiaire Sensibilité utilisable Rapport Signal/Bruit

GENERAL

Alimentation Polarité Résistance desenceintes Puissance desortie

REMARQUE : Les spécifications sont susceptibles d'être modifiées sans préavis.

Compact discaudiosystem Compact disc

44.1KHz 1bit 5-20,000Hz 2 stéréo 70dB

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 MHz Plus de 15dB àS/B30dB 25 dBà1KHz 50 dB

530-1710KHz U.S. 522-1620KHz EURO 450KHz Supérieure à45dB 40 dB

11 -14VDC Masse /négative 4 ohms 50W x4

LETTORE CD

Sistema Tipo di disco Frequenza di campionatura N° quantizzazioniBit Frequenza Numero diCanali Rapporto S/N

SEZIONE RADIO FM

Raggio diFrequenza

Frequenza intermedia Sensibilità Separazione Stereo Rapporto S/N

AM/MW

Raggio diFrequenza

Frequenza intermedia Sensibilità Rapporto S/N

GENERALE

Alimentazione Polarità Impedenza altoparlanti Potenza d'uscita

Le specifichesonosoggetteacambiamentisenza alcun preavviso.

Sistema di Audio CD CD

44.1KHz 1bit 5-20,000 Hz 2 stereo 70db

87.5-107.9MHz U.S.

87.5-108MHz EURO

10.7 Mhz migliore di15dBaS/N30dB 25dB a1KHz 50dB

530-1710KHz U.S. 522-1620KHz EURO

450Khz migliore di45dB 40dB

Dc11 14V Terra negativo 4 ohms 4x 50Watts

Page 18

14. TROUBLE SHOOTING

Before going through the check list, check wiring connection. If any of the problems persist after check list has beenmade, consult your nearestservicedealer.

Symptom

No power

Disc cannot be loaded or ejected

No sound

The operation keys do not work

Cause

The car ignition is not on.

The fuse is blown.

Presence of CD disc inside the player.

Inserting the disc in reverse direction.

Compact disc is extremely dirty or defective disc.

Temperature inside the car is too high.

Condensation.

Volume is in minimum. Wiring is not properly

connected. The built-in microcomputer is

not operating properly due to noise.

Solution

If the power supply is properly connected to the car accessory terminal, switch the ignition key to ACC

Replace the fuse. Remove the disc in the player, then put a

new one.

Insert the compact disc with the label facing upward.

Clean the disc or try to play a new one.

Cool off or until the ambient temperature returns to normal.

Leave the player off for an hour or so, then try again.

Adjust volume to a desired level. Check wiring connection.

Press the RESET button. Front panel is not properly fixed into its place

Sound skips.

The radio does not work. The radio station automatic selection does not work.

ERROR 1

ERROR 2

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment Directive)

The installation angle is more than 30 degrees.

The disc is extremely dirty or a defective disc.

The antenna cable is not connected.

The signals are too weak.

Mechanism Error

Servo Error

Adjust the installation angle to less than 30 degrees.

Clean the compact disc or try to play a new one.

Insert the antenna cable firmly.

Select a station manually.

Press the reset button if the error code does not disappear, consult your nearest service dealer.

Page 19

10 R - 02 1397