Page 1
Page 2
Page 1
1. VOLUME UP/DOWN KNOB (turn)
AUDIO MODE SELECTOR (press)
In normal mode, use this knob to increase or decrease the volume level.
To access the various sound parameters push the knob (like a button) to cycle
through the following adjustable settings:
VOLUME -> BASS ->TREBLE -> BALANCE -> FADER
Use the knob to increase or decrease the settings for Volume, Bass, Treble,
Balance and Fader.
In each mode, the waiting time is about 5 seconds, and the time waiting time
is over, it returns to the last display mode .
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
Push and hold the knob (like a button) for more than 2 seconds repeatedly to
select BEEP ON/BEEP OFF, USER SET(FLAT, CLASSIC, ROCK, POP),
VOL LAST/ VOL DEFA, AVOL, CLK ON/CLK OFF, CLK 12/CLK 24 mode.
Use the knob to increase or decrease the settings for these functions.
2. POWER/MUTE
Press any button to turn unit on. Press the button to MUTE the audio. Press
and hold POWER to turn it off.
General and Radio Controls
76 42
8135
Page 10
Specifications
NOTE:
Specifications and design are subject to modification, without notice,
due to improvements in technology.
Supply voltage : 12V DC(11V-15V)
Current consumption : Less than 10A
Audio Signal Output : 2ch line out
Characteristics : (1) Frequency Response: 20Hz-20KHz
(2) S/N Ratio: 50 dB(JIS)
(Europe) (U.S.A.)
FM FM
Frequency Coverage:
87.5 to 108Mhz 87.5 to 107.9Mhz
IF 10.7Mhz 10.7Mhz
Sensitivity (S/N = 30dB) : 20dBu 20dBu
AM AM
Frequency Coverage:
522 to 1620Khz 530 to 1710Khz
IF 450
Khz 450Khz
Sensitivity (S/N = 20dB) : 45dBu 45dBu
SCAN
MODE
CLOCK
1
PLAY
2
BAND
LOUDNESS
+10
+10
4 5 6
-10
-10
RANDOM
3
REPEAT
AUX IN
Page 3
Page 2 Page 9
3. MODE (Input Select)
Press this button repeatedly to cycle through the audio input sources:
AUX >TUNER > USB > CARD
4. AUX IN JACK
This jack is a convenient way to play music from an MP3 music player such
as an ipod through your car audio.
Simply connect the headphone output of the MP3 player to this input jack, and
press MODE button to select AUX as input source and begin playing music on
the MP3 player.
Please note:
AUX IN Mode can only be selected if it is enabled in the system Settings.
If you are having problems with AUX IN mode, please check the setting.
5. RADIO PRESETS 1-6
These buttons are used to store the presets for radio stations. To set a preset,
tune to the desired radio station. Then press and hold the preset to which you
wish to assign that station for more than one second and release. To replace it
with a different station, repeat the process and the new setting will override
the previous one.
6.BAND/LOUDNESS
Press briefly, repeatedly to cycle between the five radio bands:
FM1 > FM2 > FM3 > AM1 > AM2
Press and hold this button to activated as LOUDNESS mode on or off.
7. TUNE/SEEK UP/DOWN BUTTONS
Press these buttons briefly to step up or down the radio dial in single step
increments. Press and hold for more than one-haft second and the tuner will
enter the SEEK mode. In this mode the tuner will stop at the next strong
station available.
8.CLOCK
Press to display or adjust the clock. Press and hold this button until the time
flashing then use the volume knob to adjust the time.
Setting Mode
You can make changes to the system setting in the following area:
Radio Frequency Range + Enable/Disable AUX In+ Clock Format
- Radio Settings
The unit can operate on several different frequency ranges. Please see
the following for these ranges.
- AUX Input Enable/Disable
Press DOWN ARROW to move between Enable and Disable modes.
When the selection has been made, press ENTER to save it and move to
next setting area.
- Clock Format (12-hour or 24-hour)
Press DOWN ARROW to move between 12-hour or 24-hour format,
press ENTER to save it and turn off this unit.
To enter setting mode, input the following command by pressing remote
keys" 8, DOWN DIRECTION KEY, 9, ENTER "
To change the range to suit your location, press DOWN ARROW unit
the desired frequency range is hight lighted. The press ENTER
to save it and move to next setting area.
The display will show "TEST MOD " breifly to indicate you are in
system setting area and then automatically change to Radio Frequency
selection mode. At anytime, you can press the DOWN ARROW to step through
the above areas. When you are ready to leave the System Setting area,
press ENTER. The unit will reboot to initialize with the new setting.
BAND NAME FREQUENCY RANGE
AMERICA 1 FM:87.5-107.9MHz AM:530-1710kHz
AMERICA 2 FM:87.5-108MHz AM:520-1620kHz
AMERICA 3 FM:87.5-107.9MHz AM:530-1620kHz
EUROPE FM:87.5-108 MHz AM:522-1620kHz
MID EAST FM:87.5-108 MHz AM:531-1602kHz
AUST(AUSTRALIA) FM:87.5-108 MHz AM:522-1710kHz
RUSSIA FM:65.0-108 MHz AM:522-1620kHz
If AUX Input is disable in System Settings, any input connected will not
be played.
Page 4
Page 3 Page 8
USB/SD Card (MP3 Playback) Controls
4
125 67
To play tracks from a USB drive or SD card, insert the drive into the appropriate
port/solt on the faceplate. The display will show “ USB or “ CARD ” ,
indicating that the drive is being read.
The unit will display tracks when ready by file name (or, if created with ID3-tag
information, with Song Title, Artist and Album information) and will begin playing
the first track in the directory.
1.PLAY/PAUSE
Files will begin playback automatically upon insertion. To pause playback,
press this button. Press again to resume playback.
2.RPT(Repeat Play Mode)
Press this button to repeat the playback of all the files in the current folder
automatically. ”“ RPT ONE/ABM/OFF ” will be displayed. Press again to cancel.
3. -10 BUTTON
+10 BUTTON
To skip back or ahead 10 tracks in the current folder, press this button.
4.I<< and >>I (Skip back/skip forward, Fast rewind/fast forward)
Press these buttons to skip back or ahead one track.
5.RDM (Random Play Mode)
Press this button for playback of all the files in the current folder in a random
order. “ RDM ON/OFF ” will be displayed. Press again to cancel.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
3
Trouble Shooting
Before going through the check list, check wiring connection. If any of the problems persist after check
list has been made, consult your nearest service dealer.
Symptom
No power
Cause
The fuse is blown.
Volume is in minimum.
No sound
The antenna cable is not
connected.
The signal are too weak.
Insert the antenna cable firmly.
Select a station manually.
The radio does not
work.
The radio station
automatic selection
does not work.
Wiring is not properly
connected.
Adjust volume to a desired level.
Check wiring connection.
Replace the fuse.
The car ignition is not on.
If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to " ACC "
Solution
SCAN
MODE
CLOCK
1
PLAY
2
BAND
LOUDNESS
+10
4 5 6
-10
-10
RANDOM
3
REPEAT
AUX IN
Page 5
Page 4 Page 7
6. SD CARD slot
Insert SD card in this slot for playback. Please note icon on panel which
shows you how to orient card (angled corner goes to left side of slot).
7. USB port
Insert USB drive in this slot for playback.
Wiring connection diagram
+
+
+
+
WHITE
RCA LINE OUT
WHITE L
RED R
WHITE/BLACK
GREEN/BLACK VIOLET/BLACK
GRAY/BLACK
GRAY
VIOLET
GREEN
LEFT FRONT
SPEAKER
RIGHT FRONT
SPEAKER
LEFT REAR
SPEAKER
RIGHT REAR
SPEAKER
4 OHM 4 OHM
4 OHM 4 OHM
-
-
-
-
YELLOW (CONSTANT 12 volts)
BLACK (GROUND)
RED (ACC.12 volts)
BLUE (ANT)
10A FUSE
0.5A FUSE
Page 6
Page 6 Page 5
5x15mm
support screw
5mm nut
support screw
support strap
dashboard attachment
surface
head unit
support screw
mounting case
Installation
Figure 1 Bending the support tabs Figure 2 Forming the support bracket
Figure 3 Insert levers unit “click” occurs,
then use levels to pull out head unit.
Operation of Remote Controller
1.SOURCE(Input select, same as
MODE on the head unit)
2.EQ(Preset Equalizer Curves)
Press repeatedly to cycle through these modes:
FLAT, CLASSIC, ROCK, POP, USER SET.
3.MUTE
Press this button to silence the audio. Press again
to restore the previous audio volume level.
4.LOC
In some areas, reception of an AM station may be weak.
Changing the reception mode to LOC by pressing this
button allows the receiver to skip the weaker signals.
Press again to return to DISTANT mode.
5.RDM/MO/ST
In some areas, reception of an FM station may be weak. Changing the
reception mode to MONO by pressing this button may improve the reception.
Press again to return to STEREO mode.
6.AMS
In Radio mode, press this button to play each preset number for several
seconds; press and hold this button to searches from the current frequency
and checks the signal strength level until 6 station are found. And then the 6
station frequency are preset to the corresponding preset memory numbered
bank. The auto-storage operation is implemented in each selected band.
When the auto-storage operation is finished, the radio execute the Preset scan.
7.Press this button to activated as LOUDNESS mode on or off.
8.BAND
Press briefly, repeatedly to cycle between the five radio bands:
FM1 > FM2 > FM3 > AM1 > AM2
9.10+
In USB/SD Card mode, press this button to add 10 tracks in the current folder .
10. TRACKS SELECT
In USB/SD Card mode, press these button to choose the track.
1
6
23
5
9
4
7
10
8
Loading...