Boss Audio BV-650M Owner Manual

CONTENTS

IMPORTANT SAFETY INSTRUCTION

Important Safety Instruction Installation

DIN Front-Mount (Method A)

Installing the unit Removing the unit

DIN Rear-Mount (Method

Wiring Connection Operation

Location and function of keys Switching onloff the unit Openlclose the monitor and angle adjustment Remote sensor Liquid crystal display

6.5

inch TFT display Reset function Operating when the monitor not stretching out

Sound mode selection Adjusting the volume Adjusting the bass Adjusting the treble Adjusting the balance Adjusting the fade Adjusting the loud Adjusting the equalization Subwoofer (optional) Mute Setting the clock Radio operation

...........................................

..............................

............................

.............................. 7

.............................................

..........................................

....................................

..........................

............................

.....................................

......................................

..........................

...............................................

.............................

..............................

Switching to radio mode Selecting the frequency band Selecting station Setting memory Automatically memory storing program scanning Localldistance

Monolstereo

Scan

..........................................

..........................

...........................

...............................

..............

................

.................

...............

.....................

...................

......................

........................

.....................

..............

......................

............

.........

........................

......................

4 4

6 6

10 1 1 1 1

1 1

CDC operation

Switching to CDC mode Selecting tracks Pausing playing Previewing all tracks Repeating the same track Playing all tracks in random

Selecting disc Operating when the monitor stretching out

Menu control operation in radiomode Menu control operation in

CDC

mode

Operation Control & Function Keys Switching to Selecting receiving mode Selecting channel Menu control operation Volume adjustment Screen display

4:3/16:9

Specification

selector

12 12 12 12 12 12 12 12 12 12

13 13 13

................................

............

.........................

..........................

..................

..........

.......

............................

......................................

....................................

.......................................

.................

mode

....................

...............

...........................

..................

.........................

................................

.............................

......................................

13 13 13 13 13 13 13 13

15 16 16 17 17 17 17 18 18 18

CAUTION:

Please read and observe all warnings and instructions given is this owner's manual. Keep these instructions. Retain this booklet

for future reference.

Please read the following safety instructions carefully.

This set has been designed and

manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit protect you if

you observe the following procedures for

installation, use and servicing. This unit doesn't contain any parts that can be repaired by the user.

The monitor is operated automatically.

Do not draw the monitor out or turn it upward or downward manually. Otherwise, the mechanism construction may be harmed to some degree.

When you operate the monitor with the

remote handset, do not touch the monitor by your hands. It may harm your fingers.

INSTALLATION

Notes:

Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30" from horizontal, the unit might not give its optimum performance.

Avoid installing the unit where it would

be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONTIREAR-MOUNT

This unit can be properly installed either from "Front" (conventional DIN mount) or "Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

Front-

TAKE OUT SCREW BEFORE INSTALLATION

Before install the unit, please remove the two screws on the back of the unit.

Take out screw before installation

DIN FRONT-MOUNT

Installation Opening This unit can be installed in any dashboard having an opening as show below:

Installing the unit Be sure you test all connections first, and

then follow these steps to install the unit.

Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative terminal.

2. Disconnect the wire harness and the antenna.

Lift the top of the outer trim ring then pull it out to remove it.

The two supplied keys release tabs

inside the unit's sleeve so you can

remove it. One key is for the right side and the other is for the left side. Insert the keys as far as they will go (with the

(Method

(-)

notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit.

Outer

Trim

5. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appropriate tabs behind the dashboard to secure the sleeve in place.

Sleeve

Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables.

Slide the unit. into the sleeve until it locks into place.

To further secure the unit, use the supplied metal strap to secure the back of the unit in place. Use the supplied hardware (Hex Nut

(5mm) and Spring

Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your vehicle's mounting area. Then use the supplied hardware (Tapping Screw

(5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit.

Spring

Washer

Metal

Strr-

Mounting

Bolt

Reconnect the cable to the vehicle

(-)

battery's negative

terminal. Then

replace the outer trim ring.

Hex

Nut

+ 7 hidden pages