Boss BV9.2, P9.2AIOB Owner's Manual

Download

Page 1

OWNER S MANUAL

9.2 TFT-LCD DVD COMBO MONITOR

Page 2

Page 3

Contents

Caution

Features andControls

Power andMode Selection Releasing The Monitor

Mute Function

Picture Control Contrast/Brightness/Color

DVD Setup Setup Menu General Setup TV Aspect Ratio

Angle Viewing OSD Language Captions Screen Saver

Last Positionmemory

Audio Setup Dolby DigitalSetup Equalizer Settings Video Setup Quality Preferences Setup TV Type PBC

Audio Subtitle Disc Menu Parental

Country Region Default Password Setup Password Mode Password Change

6 8

21 21 21 21

22 22 22

23 DVD Functions Eject Vol+/Vol-

Mute Play orPause

Audio Stop Arrows Setup Menu Display Number Buttons Subtitle Title

Slow Fast ReverseSearching

Fast ForwardSearching Previous

Next Repeat A-B Repeat NTSC/PAL

Angle

PBC Zoom Go To

Connection Diagram

Installation

Disc Information

Troubleshooting

Specifications

24 24

26 27

24 25

25 26

30 30

Turning on The Monitor

Selecting anAV mode

Remote Control

Monitor/DVD Player

Page 4

Caution

Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

WARNING

CAUTION

The lightningbolt with arrowheadinside in anequilateral triangle isintended to alertthe user tothe presence of

dangerous voltage within theproduct s enclosurethat may be of sufficientmagnitude to constitutea risk ofelectric shock to people.

The exclamationpoint inside anequilateral triangle isintended to alertthe user tothe presence ofimportant operating and maintenance (servicing)instructions in theliterature accompanying the product.

Installation ofall TV monitors must beout of thedriver s field ofvision.

Do nottry and servicethese products yourself, a qualified servicecenter or factory servicecenter for all repairs.

locale

Be carefulnot to dropor apply underpressure to the front panelof your video monitor. Ifthe screen cracks due tomisuse, your warranty will bevoid!

Do notmount the productwhere it willobstruct the deploymentof the airbagor in anarea where it would affectthe driver sability to controlthe vehicle. Also be careful toavoid mounting the product whereit can become hazardous duringsudden stops or inthe event ofan accident.

Be carefulnot to overloadyour cigarette lighterplug by adding more thanone device ata time.

Use extracaution with anyliquids in yourcar. If you or your child spills anyliquid on theseproducts, pull yourvehicle to theroadside

and turnthe key offto disconnect or wipethe products witha towel. Donot operate theequipment until allliquids have either evaporatedor you havehad the monitor inspected ata service centerby a qualified technician. Severeharm or dangercan result.

Use onlya damp clothto clean the screenand use onlypurified water onthe cloth. wringout all excess waterprior to wipingthe screen. Donot use anycleaners or chemicalsto clean thescreen. In mostcases a drycloth will do!

O W E R

MEN

Page 5

Quality installationsare best performed byqualified and certified installers.

Don ttouch the unitif there is a flashof lightning. You may receive anelectric shock.

Do notcover or stopup heater ducts orvents. It maycause a fire orreceive an electricshock.

Watching the monitor foran extended periodof time without theengine running may depletethe vehicle s battery charge.

This productis designed for operation witha 12 Volt DC, negative groundvehicle. It is notsuitable for operation under otherconditions or voltages.

CAUTION

Operating Notes

Do notbring magnetic devices such ascredit card ormagnetic card nearthe magnets.

1. The operating temperature of this product is limited to 14 ~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).

4. Do not open the housing and yourself. Refer servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.

6. Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.

attempt to make any repairs

Caution

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

Note: This equipment has been tested and has been found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference. In some cases, the user will be required to correct the interference at his own expense.

SPECIFICATIONS

DC 12V

16:9

1152x234

NTSC/PALAuto Select

DVD-AV1-AV2

1EA

12.1(L)X10.8(W)X2.3(H)inch

Page 6

Monitor / Player System Components

Remote Control

Wireless Headphones

Troubleshooting

Symptom

Items to Check

Actions to be Taken

Remote controldoes not workproperly.

Unable toreceive TV broadcast.

Is thepower turned on?

Is theaudio which isconnected with the audiocable set toreceive the DVDsignal output?

Is audiocable is connectedsecurely? Is themonitor which isconnected

with theaudio cable turnedon?

Is thedigital audio outputset in thecorrect position?

Is theremote control facing the remotesensor?

Is thedistance too far?

Is thereany obstacle inthe middle?

Is thebattery weak?

Is theantenna connected properly?

Check thecar battery capacity.

Select thecorrect input modefor the audioreceiver. Connect theaudio cable intothe jacks securely. Turn onthe monitor connectedwith the audiocable. Set theDigital Audio Outputto the correctposition,

and thenturn on theDVD player againby pressing the POWERbutton.

Point theremote control towardthe remote sensorof the product.

Use theremote control within15 feet. Remove theobstacle. Replace withnew battery.

Check antennaconnection.

Buttons donot work.

No sound

When adisc is broughtfrom a coldenvironment to awarm one, theremay be moisture on thethe disc, orcondensation on thepickup lens. Itwill affect disc playback.

1. Removethe disc fromthe DVD player.

2. Turn on the powerand leave iton for anhour to vaporizethe condensation.

Monitor/DVD Player

Moisture or condensation on lens

Page 7

Features And Controls

EJECT Button

Disc loadingslot

AUX InputJack

Caution

Do not bring magnetic devices such as credit cards or magnetic cards near the monitor.

Dome LightButton

POWER Button

AV Select Button

MENU Button

+/- Buttons

PLAY/PAUSE Button

Disc Information

DVD features

DVD discs provide high-resolution images with high-quality sound and surround sound effects. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and MP3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management information that is recorded on a DVD disc. Please check the region code. 1: North America 2: Japan 3: Korea and Southeast Asia 4: Australia, Mid & South America 5: Russia 6: China

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. Patents and other intellectual property rights owned by the Macrovision Corporation and other rights. Owner s use of this copyright protection technology must be authorized by the Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by the Macrovision Corporation.

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information). Don t stick a label or a glue-based note on either side of the disc. Don t use discs that have glue or a damaged label with exposed adhesive reside. It might result in damage to your DVD player. Don t put discs in the sunshine. Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes like a star, a heat, etc. may cause damage to the player.If a disc is dirty, wipe softly with a wet cloth and then with a dry one. Before playback, wipe the disc outward from the center with a clean cloth. Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

Page 8

Features and Controls

Remote Control

Installation

1. Open the package and check that these items are presents.

INSTALLATION PLATE

UNIT

SCREW A SCREW B

2. Connect the external compoments to the RCA cable or AV output. (Refer to the connection diagram on page 32)

3.Match the position of installation bracket and installation plate with screw A.

4. Tighten the unit with the supplied screw B.

Turns the DVD Player/Monitoron or off.

Auto TV (not function in this unit)

DVD AV1 AV2

A/V SELECT

P/N This buttonpermits you tochoose

among Multi,PAL andNTSC.

Use tomove to thedesired menu.

DISPLAY Press toshow elapsed orremaining time ofa chapter ora title.

NUMERIC button Use whenmaking a selectionon the

menu screen.

MODE

RETURN

(not functionin this unit)

DVDSDUSB

POWER

MUTE Press thisbutton to switchoff the audio duringplayback. Press again to restorethe audio.

UP/DOWN/RIGHT/LEFT ARROWS

MENU (OSDon monitor) Press thisbutton to openthe onscreen menusystem to setupand control variousparameters of the monitor andDVD player. UP/DOWN

MENU (DVDmenu)

This buttonpermits you toview the menu onthe DVD.

SUBTITLE Use thisbutton to selectthe menu for choosinga subtitle language.

TITLE (Title menu) When aDVD is playing,press this button toview the Title Menu.

PBC (Video CD only) Press thisbutton to accessthe special Playback Controlfunctions for VCD

2.0 formatVideo CD S.

SETUP

Press thisbutton to displaythe Setup menu. The Setupmenu enables you to enterthe settings requiredfor the unit towork properly.

REPEAT Press thisbutton to changethe playback

mode torepeat, and toselect the repeat mode.

Press thisbutton to returnroot menu.

Use thisbutton to switchbetween three modes

Page 9

Name And Function Of Each Part

Connection Diagram

CAMCORDER

GAME

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

CAMCORDER

GAME

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

AV Input

(AV 2)

(AV 1)

White AUDIO(L)

Red AUDIO(R)

Yellow VIDEO

Output

AMP

POWER

VOL-

VOL+

MONITOR

AV Input

YELLOW

ACC

A-B (repeatfrom Ato B)

VOL-/+ button

AUDIO

ENTER

ZOOM

UP/DOWN/RIGHT/LEFT ARROWS

PLAY/PAUSE

GO TO

STOP

SKIP FORWARD/BACK

FAST FORWARD/REVERSEPLAY

Use thesebuttons to selecteither fast forward orfast reverse playback.

Use thisbutton to selectthe beginning and endof a trackwhich you wishto have repeat inplayback.

Use toincease or decreasevolume level.

Use thisbutton to selectone of the audio soundtracksprogrammed on a DVD disc.It is alseused to selectthe audio outputmode for theDVD playback.

Press thisbutton to confirmthe item you havefound and highlightedusing the arrowbuttons. Usually thisis done to confirma selection oritem to be played onthe DVD.

If yourDVD disc supportszooming in to seethe program differently, pressing this buttonwill enable youto change the amountof zoom.

Use thesbuttons to navigatethe various menusand screens forthe monitor andDVD systems.

Tostart playback ofa disc, pressthis button. Pressagain to pausethe playback. Ifplayback is paused,press this buttonto resume playback.

Use tosearch for atitle or achapter on your DVDdisc.

Press thisbutton to stopthe playback of thecurrent disc.

Use thesebuttons to skipto the next or lasttrack, chapter orfile on the disc inthe player.

BLACK

RED

+ 12V DC Battery

Chassis Ground

Car domelamp (-)

Car domelamp (+)

WHITE

GREEN

Page 10

Power And Mode Selection

Mute Function

1. Press the button on the remote control to mute the audio.MUTE

2. Press the button again on the remote control to return to theMUTE previous volume level.

Releasing The Monitor

Push the release button (located on the front edge of the screen housing) and lower the monitor. You can also adjust the swivel angle.

Turning on The Monitor

POWER

UNIT

REMOTE CONTROLLER

Make thisarrow in DOWN direction only.

1. Connect the monitor to external devices.

2. Press the POWER button on either the remote control or the unit once to turn the power on.

Press the same POWER button to turn the power off.

3.Power on the external devices and play.

DVD Functions

PBC

[DVD]/[AUDIO]/[MP3]

[VCD]

You can turn the PBC (Play Back Control) function on or off by pressing this button. When PBC is loaded, the PBC function is enabled automatically. This function is similar to selection of DVD title. Please note that this function does not work with MP3 dics.

Zoom

[DVD]

Some DVDs are programmed to allow you to zoom into the image, magnifying it. Pressing the ZOOM button does this in steps, according to the chart to the right.

[VCD]/[AUDIO]/[MP3]

GO TO

The GOTO function allows you tobegin playback ata specific locationon the disc.To do this,press GO TO and navigatethe screen whichfollows to selectthis playback location.

Title

Move tothe desired title.

Chapter

Move tothe desired chapter.

Audio

Selects thedesired audio output.

Subtitle

Select thedesired subtitle.

Angle

Watch the different view angle.

TT Time

Totaltime.

CH Time

Chapter time.

Repeat

Sets therepeat play.

Time Display

Watch play time.

OSD

1/2

1/3

1/4

ZOOM X2

CONDITION

ZOOM X3

ZOOM X4

ZOOM X1 / 2

ZOOM X1 / 3

ZOOM X1 / 4

Off

Menu Title Chapter Audio Subtitle

01/02

01 / 02

06/6106 / 61

5.1CH Chinese5.1CH Chinese OFF

Bitrate 31

Title Elapsed0:20:02Title Elapsed 0:20:02

This button does not function in PBC mode.

This button does not function in this mode.

RELEASE BUTTON

Page 11

Power and Mode Selection

Selecting an AV mode

1. Turn the power ON on the unit and on the external devices.

2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on the unit or on the remote control.

3. Play the external device.

DVD Functions

Repeat

Pressing REPEAT button changes the play mode as follows:

[DVD]

OSD CONDITION

Chapter

Title

All

Repeat chapter

Repeat title

All

Repeat off

[VCD]

The REPEAT button does not function when a VCD disc is being played.

Pressing REPEAT button changes the play mode as follows:

[AUDIO]

OSD CONDITION

Track

All

Repeat single

All

Repeat off

[MP3]

Pressing REPEAT button changes the play mode as follows:

OSD CONDITION

Repeat One

Repeat Folder

Folder

Single

Repeat folder

All

Random play

Shuffle

Random

Single

Repeat folderone time

Single play

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSC and PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to view a scene from a different camera angle. If theANGLE feature is enabled in the Setup Menu (see page 14) and the disc has this option,an angle mark will be displayed on the screen. When that occurs, press theANGLE button to see these alternate viewing angles.

Page 12

Picture Control

To adjust CONTRAST, BRIGHTNESS, or COLOR press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value. Press the MENU button to make another adjustment or leave the MENU system.

Contrast/Brightness/Color

CONTRAST

BRIGHTNESS

COLOR

DVD Functions

Prev( )

Press this button to advance the player from the current chapter.to the previous chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

Press this button to advance the player from the current chapter .to the next chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

Repeat(A-B)

You can set the player to repeat a segment over and over until you cancel it.To do this, you mark the beginning of the desired segment (A) and the end of segment (B). The selected segment will be repeated automatically until canceled.

[DVD]/[VCD]/[AUDIO]

OSD CONDITION

Start pointof repeat

Ending pointrepeat function

1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you see the screen you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

Page 13

DVD Setup

Setup Menu-Main Page

When the button is pressed, the setup menu will be displayed as shown below. Select the menu category and make changes according to charge your preferences.

SETUP

1. Press the button if the disc is playing.STOP

2. Press the button to display setup menu.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again to turn off the setup menu.SETUP

TV DisplayTV Display Angle MarkAngle Mark OSD LangOSD Lang Captions Screen Saver

Screen Saver

Last MemoryLast Memory

PS On ENG On On On

Go To General Setup Page

General Setup PageGeneral Setup Page

DVD Functions

Fast Reverse Searching( )

Pressing FR button repeatedly changes the play mode as follow:

[DVD]

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewindsearch

4X rewindsearch

Pressing FR button changes the play mode as follow:

repeatedly

[AUDIO]

[MP3]

Pressing FR button changes the play mode as follows:

repeatedly

FR 16X

FR 32X

PLAY

8X rewindsearch

16X rewindsearch

32X rewindsearch

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewindsearch

4X rewindsearch

FR 16X

FR 32X

PLAY

8X rewindsearch

16X rewindsearch

32X rewindsearch

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewindsearch

4X rewindsearch

FR 16X

FR 32X

PLAY

8X rewindsearch

16X rewindsearch

32X rewindsearch

Play

Fast Forward Searching( )

Pressing FF button changes the play mode as follow:

repeatedly

[DVD]

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forwardsearch

4X searchforward

Pressing FF button changes the play mode as follow:

repeatedly

[AUDIO]/[VCD]

[MP3]

Pressing FF button changes the play mode as follows:

repeatedly

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forwardsearch

4X searchforward

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forwardsearch

4X searchforward

FF 16X

8X searchforward

16X searchforward

FF 32X

PLAY

32X searchforward

Play

Page 14

DVD Setup

General Setup

1. TV Aspect Ratio

In theSetup function calledTV Display, you set the player to outputthe video signalat the same aspectratio as yourmonitor. If the monitor is widescreenformat, select WIDE. If itis as normal screen (4:3), choose NORMAL/PS (Panand Scan) orNORMAL L/B (Letterbox).

Normal/PS4:3PANSCAN Choose thissetting if youwant the movieto fill theentire screen. (This mightmean that theleft and rightedges won tbe seen)

Normal/LB4:3 Choose thissetting if youwant to seethe movie inits original aspectratio. (The moviemight appear withblack bars atthe top andbottom of thescreen.)

Wide 16:9WIDE SCREEN Choose thissetting if yourDVD Player isconnected to awidescreen TV. (This opitionis available onlyif the dischas a 16:9display aspect ratio.)

2.Angle Viewing

Some DVDdiscs contain programmingwhich allows you to viewa scene froma few different camera angles.You can tellwhen a sceneis so recordedwhen an Angle Mark is displayedon the screen.This mark will onlyappear if you have enabledthe Angle Mark feature in theDVD Setup menu.

On: Whenselected, the screenwill be shownwith

angle mark.

Off: When selected,no angle markis shown on

the screen.

3.OSD Language

Use thisoption to setthe OSD language. When selected,change to setthe on-screen display language.

Angle MarkAngle Mark OSD LangOSD Lang Captions Screen Saver

Screen Saver

Last MemoryLast Memory

On ENG On On On

Set TVDisplay Mode

General SetupPageGeneral SetupPage

Normal/LB Wides wide Squeeze

Wides wide

Squeeze

TV DisplayTV Display PS Normal/PS

OSD LangOSD Lang Captions Screen Saver

Screen Saver

Last MemoryLast Memory

ENG On On On

Set AngleMark

General SetupPageGeneral SetupPage

Off

TV Display

TV Display PS

Angle MarkAngle Mark On On

Screen SaverScreenSaver Last MemoryLast Memory

On On

Set OSDLanguage

General SetupPageGeneral SetupPage

TV DisplayTV Display PS Angle MarkAngle Mark On OSD Lang

OSD Lang

Captions

ENG On

English

Wide 16:9SQUEEZE (Justified) Choose thissetting if yourDVD Player isconnected to awidescreen TV. (This opitionis available onlyif the dischas a 16:9display aspect ratio.)

DVD Functions

Subtitle(SUB-T)

This button is used to select the language for the on-screen display system. (This title menu may vary, depending on the particular DVD.)

[DVD]

OSD

1/2

Title

Slow( )

Used to display the title menu of the loaded DVD disc. This function is only present on discs which support it.

[DVD]

[DVD]/[VCD]

CONDITION

1/4

1/8

2X slowforward

4X slowforward

8X slowforward

Use this button to play a disc in slow-forward or slow-reverse. Slow playback can be done at five different speeds. Pressing this button repeatedly decreases the speed in steps. Pressing a sixth time returns playback to the normal speed.

1/16

1/2

1/4

1/8

1/16

Play

16X slowforward

2X slowrewind

4X slowrewind

8X slowrewind

16X slowrewind

Play

1/32

32X slowforward

1/32

32X slowrewind

Page 15

DVD Setup

Audio Setup

4. Captions

5. Screen Saver

The screensaver is usefulto prevent yourdisplay from becomingdamaged. The screen saverpicture appears whenyou leave theDVD player instop mode for abouttwo minutes.

6. Last Position Memory

The DVDplayer is capableof remembering themoment in theDVD playback youwere viewing atthe time you turned off the player. If Last Memoryis set ON, when you start yourcar the DVDplayer will automaticallybegin playback atthis point inthe program.

Angle MarkAngle Mark OSD LangOSD Lang

Screen SaverScreenSaver Last MemoryLast Memory

On ENG

On On

Closed Gaption

General SetupPageGeneral Setup Page

TV DisplayTV Display PS

Angle MarkAngle Mark OSD LangOSD Lang Captions

Last Memory

On ENG On

Screen Saver

General SetupPageGeneral Setup Page

TV DisplayTV Display PS

Angle MarkAngle Mark OSD LangOSD Lang Captions Screen Saver

Screen Saver

On ENG On On

Set LastMemory State

Set LastMemor yState

General SetupPageGeneral Setup Page

TV DisplayTV Display PS

Go To Speaker SetupGo To Speaker Setup

General Setup PageGeneral Setup Page

Speaker Setup Spdif Setup Dolby Digital Setup Channel Delay Equalier 3D Prosessing HDCD

Speaker Setup Spdif

Setup

Dolby

Digital Setup

Channel

Delay Equalier 3D

Prosessing

HDCD

Off

Captions On

Off

Screen Saver

Screen Saver On

Off

Last Memory

Last Memory On

DVD Functions

Display

Pressing the DISPLAY on the remote control changes the play mode as follows:

button

[DVD]

OSD

CONDITION

Title Elapsed

Title Remain

Chapter Elapsed

Display theTitle Elapsed

Display theTitle Remain

Display theChapter Elapsed

[VCD]

Whenever press the button,title chapter will be displayed as follows:

Pressing the display button displays information about the current CD on the screen as follows:

[AUDIO]

OSD CONDITION

Single Elapsed

Single Remain

Display thesingle elapsed

Display thesingle remain

Display thetotal elapsed

[MP3]

Your DVD player will display the counter automatically when you play the MP3 disc.

Number Buttons

The 0through 9 numberbuttons are usedto enter thenumber of thetrack, the number of theDVD chapter, the time, the date,etc.

OSD CONDITION

Single Elapsed

Single Remain

Display time

Left displaytime

No sign

Chapter Remain

Display Off

Display theChapter Remaining

No sign

Display Off

TotalElapsed

TotalRemain

Display thetotal remaining

[DVD]

Select atrack by pressingthe corresponding numberbutton.

[AUDIO]

You can select a track in thefolder by pressing thecorresponding number button.

[DVD]

OSD CONDITION

Select Track:__ Select trackno

OSD CONDITION

__:__ Select trackno

Page 16

Dual Mono

Use this function to set the input audio signal to match your speaker setup.

Dynamic

Use this function to change the setting from the factory.

Set DRCOffSet DRCOff

Dual MonoDual Mono Mix

Dynamic

Dolby DigitalSetupDolbyDigital Setup

L-Mono R-Mono

Dual MonoDual Mono Stereo

Mix-Mono

Dolby DigitalSetupDolbyDigital Setup

Dynamic

FULL

3/4

1/2

1/4

OFF

1. Dolby Digital Setup

Dynamic

Dual StereoSetup

Dolby DigitalSetupDolbyDigital Setup

L-Mono R-Mono

Dual MonoDual Mono Mix Stereo

Mix-Mono

DVD Setup

Show below are two examples ofAudio Setups.

Go ToDolby Digital SetupGoTo Dolby Digital Setup

General SetupPageGeneral SetupPage

Speaker Setup Spdif Setup Dolby DigitalSetup Channel Delay Equalizer 3D Prosessing HDCD

Speaker Setup Spdif

Setup

Dolby

Digital Setup

Channel

Delay Equalizer 3D

Prosessing

HDCD

Dual StereoSetupDual StereoSetup

Mix

Go ToDolby Digital SetupGoTo Dolby Digital Setup

General SetupPageGeneral SetupPage

Speaker Setup Spdif Setup Dolby DigitalSetup Channel Delay Equalizer 3D Prosessing HDCD

Speaker Setup Spdif

Setup

Dolby

Digital Setup

Channel

Delay Equalizer 3D

Prosessing

HDCD

2. Equalizer Settings

Bass BoostBass Boost Super BassSuper Bass Treble BoostTreble Boost

Off Off Off

Select EqualizerType

Select EqualizerTyp e

Equalizer PageEqualizerPage

Rock Pop Live Dance Techno Classic Soft

EQ Type

EQ Type None None

DVD Functions

Stop( )

In DVDmode, Press STOP to stop playback. Toresume playback, pressPLAY/PAUSE. If you pressSTOP and then PLAY/PAUSE twice, the playerwill begin playbackat the first scene ofthe movie.

[DVD]/[AUDIO]

In MP3mode, Pressing STOP will stop audio playback.Press PLAY/PAUSE to begin playback ofthe first titleon the disc.

the

[MP3]

Pressing theSETUP brings up theDVD disc menu.The content of thismenu varies, depending onthe programming ofthe disc.

[DVD]

OSD CONDITION

1 Time PressPlay Key ToContinue

Stop

OSD CONDITION

1 Time Stop Stop

Arrows( / / / )

In additionto navigating thevarious menus, youcan use thearrow buttons todefine the area of thescreen you wantto enlarge inZOOM mode.

[DVD]

After pressingSTOP button, select the desiredfolder and setthe condition bypressing ENTER button.

Disc Stop

2Time

Setup

Pressing theSETUP button opens theSetup Menu, whereyou can makeand adjust DVD settings tosuit your equipmentand preferences.

[MP3]

Page 17

DVD Setup

EQ Egualizer Type

In this menu you can choose the desired preset equalizer mode.

(Choose from Rock, Pop, Live,Dance, Techno, ClassicorSoft)

Bass Boost

The Bass Boost function increases the volume level of the bass frequencies.

Super Bass

Super Bass Boost further increases the volume level of the bass frequencies.

Treble Boost

Treble Boost increases the volume level of the upper frequencies.

Bass BoostBass Boost Super BassSuperBass Treble BoostTreble Boost

Off Off Off

Select EqualizerType

Select EqualizerTyp e

Equalizer PageEqualizer Page

Rock Pop Live Dance Techno Classic Soft

EQ Type

EQ Type None None

Super BassSuperBass Treble BoostTreble Boost

Off Off

Boss Boost

Equalizer PageEqualizer Page

EQ TypeEQ Type None

Off

Bass Boost

Bass Boost Off On

Treble BoostTreble Boost Off

Super Boost

Equalizer PageEqualizer Page

EQ TypeEQ Type None

Off

Bass Boost

Bass Boost Off

Super Bass

Super Bass Off

Truble BoostTruble Boost

Equalizer PageEqualizer Page

EQ TypeEQ Type None

Off

Bass Boost

Bass Boost Off

Super Bass

Super Bass Off

Treble Boost

Treble Boost Off

DVD Functions

Eject

Audio

Change theaudio output format. (A the discsupports available audio type.)

vailable onlyif

[DVD]

Changes theaudio output format. (Available only ofthe disc supportsavailable audio type.)

[VCD]/[AUDIO]

OSD CONDITION

Mute

Mute off

Vol+/Vol-

Use thesebuttons to adjustthe audio outputlevel of thespeaker from 0to 20.

Mute

Press MUTEto turn off the audio part of the currently playingprogram. Press itagain to return theaudio volume tothe level atwhich you werelast listening.

OSD CONDITION

Play Disc

Pause

Play or Pause( )

When thisbutton is pressed,the disc isejected. When thisbutton is pressed for more than 3seconds, the discis unconditionally ejected.So, you canuse this functionwhen you encounters not ejected situation dueto unknown reasons.

An invalidbutton press.

[MP3]

OSD

CONDITION

2 Channel

5.1 Channel

1/2:Ac32CHEnglish

2/2:Ac35.1CHEnglish

OSD

CONDITION

Stereo

Mono Left

Stereo

Mono Left

Mono Right

Mix Mono

Mono Right

Mix Mono

Whenever thisbutton is pressed,the mode switches frompause to playor play topause.

Page 18

DVD Setup

Video Setup

Sharpness can be adjusted by highlighting it in the menu and then using the UP/DOWN arrow buttons to increase or decrease the sharpness.

In the Video Setup, you can make adjustments to various elements of the picture quality.

Brightness Contrast Gamma

00 00 None

Sharpness

Video QualitySetupVideo QualitySetup

Medium Low

Sharpness Low High

Hue Saturation Luma Delay

Luma Delay

00 00 1T

1 T

Brightness Contrast Gamma

00 00 None

Sharpness

Video QualitySetupVideo QualitySetup

Medium Low

Sharpness Lo w High

Hue Saturation Luma Delay

Luma Delay

00 00 1T

1 T

Picture Quality

Video SetupPageVideo SetupPage

Component off

Quality

TV Mode

Component off

Quality

Go TOVideo Setup PageGo TOVideo Setup Page

DVD Setup

Password Setup

1. Password Mode

In the Password setup, you must first enter the current 6-digit passcode, and then you have the opportunity to change it. The factory default passcode is 000000. Once you have changed and confirmed the password, press the ENTER button.

2. Password Change

Password

Password Mode

Password Setup PagePassword Setup Page

Off

Password ModeOnPassword ModeOn On

Change PasswordChange Password

Password Setup PagePassword Setup Page

Password ModeOnPassword ModeOn On Password Change

Old Password

New Password

Confirm PWD

Password Setup, which is required for using the Parental Controls settings, is divided into two modules: Turning on the Password function, and setting a Password. The first step is to turn it on in the Password Mode setting.

Page 19

Brightness

Use this option to adjust the display brightness. When you reach desired brightness level, use the / buttons and press the ENTER button.

Contrast

Use this option to adjust the contrast level. Use the / buttons and press the ENTER button, when you reach the desired contrast level. The contrast control increases or decreases the ratio of bright and dark screen sections.

Brightness Contrast Gamma

00 00 None

Brightness

Video QualitySetupVideo QualitySetup

Sharpness Lo w

Hue Saturation Luma Delay

Luma Delay

00 00 1T

1 T

Brightness

Gamma00None

Contrast

Video QualitySetupVideo QualitySetup

Sharpness Lo w

Hue Saturation Luma Delay

Luma Delay

00 00 1T

1 T

Contrast 00

Contrast

DVD Setup

Use the Disc Menu option to select the display language for a DVD s disc menu display language. (not the same as the players menu)

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Disc Menu.

4. Press the ENTER button.

5. Press the / buttons to select Disc Menu.

5.Disc Menu

The Parental Control settings limit the player to only play content at or below a certain movie rating. The ratings systems in different countries vary. In the USA, the Motion Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc. In this menu item, you can set what is the highest level of rating you wish to allow the unit to play.

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Parental.

4. Press the ENTER button.

5. Press the / buttons to select desired parental level.

6.Parental

The Country Region setting is important because in order to set the Parental Controls, you must identify the country whose rating system your DVD disc is using.

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Country Region.

4. Press the ENTER button.

5. Press the / buttons to select desired Country Region.

7.Country Region

If you select RESET when in the DEFAULT settings mode, all the settings of the Setup Menu will be returned to the factory defaut settings, except for Parental Level, Region and Password values.

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Default.

4. Press the ENTER button to select Reset.

8.Default

PBC Audio Subtitle

On ENG

Preferred MenuLanguage

Preference PagePreference Page

French Spanish

TV Type

PAL

English

Parental Country Region USA

Country Region USA

Default

Japanese Korean

Chinese

Thai

Russian

Disc Menu

ENG

PBC Audio Subtitle

On ENG

PG CountryRegion Gods

Preference PagePreference Page

China France

TV Type

PAL

Default

Japan Taiwa n

Hongkong

GBR

Disc Menu

ENG Parental Country Region USA

Country Region USA

USA

PBC Audio Subtitle

ENG

Load FactorySetting

Load Factory Setting

Preference PagePreference Page

TV TypeTVTyp e

PAL

Disc Menu

ENG Parental Country Region USA

Country Region USA

Reset

Default

PBC Audio Subtitle

On ENG

Preferred MenuLanguage

Preference PagePreference Page

TV TypeTVTyp e

PAL

1KIDSAF 2G 3PG 4PG13 5PGR 6R 7 Nc17 8ADULT

1 KID SAF 2

PG 13

PGR

Nc17

ADULT

Parental Country Region USA

Country Region USA

Default

Disc Menu

ENG

Page 20

DVD Setup

Gamma

Hue

Select screen hue level using the direction / buttons and press the ENTER button.

Saturation

Select screen saturation level using the direction / buttons and press the ENTER button.

Luma Delay

Select the Luma Delay menu and select the preferred video image quality.

Brightness Contrast0000

Gamma

Video QualitySetupVideo QualitySetup

Medium Low

Sharpness Low

Hue Saturation Luma Delay

Luma Delay

00 00 1T

1 T

None

Gamma None

High

Brightness Contrast0000

Hue

Video QualitySetupVideo Quality Setup

Sharpness Lo w

Saturation Luma Delay

Luma Delay

00 1T

1 T

Gamma None Hue 00

Hue

Brightness Contrast0000

Saturation

Video QualitySetupVideo QualitySetup

Sharpness Low

Luma Delay

Luma Delay 1T1T

Gamma None Hue 00 Saturation 00

Saturation

Brightness Contrast0000

Luma Delay

Video QualitySetupVideo QualitySetup

Sharpness Low

Gamma None Hue 00 Saturation 00

Luma Delay

Luma Delay 1T1T

1T1 T

DVD Setup

Preference

1.TV Type

Choose the proper TV format appropriate to the monitor you have connected to the player from the following: NTSC, PAL or Multi type.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to TV Type.

4. Press the ENTER button.

5. Press the / buttons to select TV Type.

2.PBC (Play Back Control)

This feature is only available when a SVCD disc is loaded. It allows you to disable or enable the PBC (Play Back Control) menu of VCD discs.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to PBC.

4. Press the ENTER button.

5. Press the / buttons to select TV TypeOn/Off.

3.Audio

Use the audio language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitles in that language.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Audio.

4. Press the ENTER button.

5. Press the / buttons to select desired audio language.

4.Subtitle

In the Subtitle menu, you can select a subtitle language. Please note that subtitle will only appear in this language if the disc programming has included it.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Subtitle.

4. Press the ENTER button.

5. Press the / buttons to select desired subtitle.

PBC

Subtitle

Preferred MenuLanguage

Preference PagePreference Page

French Spanish

TV Type

PAL

English

Parental Country Region USA

Country Region USA

Default

Japanese Korean

Chinese

Thai

Russian

Disc Menu

ENG

Audio

ENG

PBC Audio

On ENG

Preferred MenuLanguage

Preference PagePreference Page

French Spanish

TV Type

PAL

English

Parental Country Region USA

Country Region USA

Default

Japanese Korean

Chinese

Russian

Disc Menu

ENG

Subtitle

Thai

Audio Subtitle

ENG

Set PBCState

Preference PagePreference Page

TV TypeTVTyp e

PAL

Parental Country Region USA

Country Region USA

Default

Disc Menu

ENG

Off

PBC

PBC Audio Subtitle

On ENG

Set TVStandard

Preference PagePreference Page

Parental Country Region USA

Country Region USA

Default

Disc Menu

ENG

PAL Multi NTSC

TV Type

PAL

In some systems, you might experience a loss in the strength of the dark sections of the displayed picture. This can be helped by changing the Gamma setting, which boosts the dark level but leaves the other levels unchanged.