May/2005 DR-30/50/80C
DR-30
DR-50
DR-80C
DR-30...................................................................................2
Specifications .....................................................................2
Parts List.............................................................................2
..............................................................................................2
DR-50...................................................................................3
Specifications .....................................................................3
Parts List.............................................................................3
..............................................................................................3
DR-80C................................................................................4
Specifications .....................................................................4
Parts List.............................................................................4
..............................................................................................4
Cardioid Dynamic Microphone
Cardioid Dynamic Microphone
Cardioid Capacitor Microphone
SERVICE NOTES
Issued by RJA
DR-30
DR-50
DR-80
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission
of ROLAND CORPORATION.
Printed in Japan (0400) (SC)17058337E0
May/2005
DR-30
DR-30:Cardioid Dynamic Microphone
Specifications
Type
Dynamic (with Talk Switch)
Frequency Responce / Output Impedance
100Hz-13,000Hz / 600 ohm
Polar Patterns / Sensitivity
Cardioid / -52 dB (0 dB=1 V/Pa,1 kHz)
Parts List
SAFETY PRECAUTIONS:
The parts marked have
safety-related characteristics. Use
only listed parts for replacement.
NOTE: The parts marked # are new. (initial parts)
Due to one or more of the following reasons,
parts with parts code ******** cannot be supplied as service parts.
• Part supplied only as a component in a complete assembly
• Copyright does not permit the part to be supplied
• Part is sold commercially
The description "Q'TY" means a necessary number of the parts per one product.
Dimensions (dia head x length x dia grip) /
Weight
50mm x 180.5mm x 22mm / 305g
Accessories
Microphone cable (4.5M) : (#04010078)
Microphone holder : (#03896589)
Screw adapter (Convert 5/8”--27 into 3/8”--16) : (#03897278)
Carring case : (#03896590)
* In the interest of product improvement, the specifications and / or appearance of
this unit are subject to change without prior notice.
CASING
FINISHED GOODS
ACCESSORIES (STANDARD)
#
# 03896590 MIC CASE 1
# 03896812 OWENR’S MANUAL ENGLISH/JAPANESE 1
# 03897278 SCREW ADAPTOR 1
# 04010078
03896578
SK000171
03896589 MIC HOLDER 1
WIND SCREEN
WIND SCREEN (MESH HEAD) DR-30 1
FINISHED GOODS (#08886 DR-30
CONNECT CORD SHIELD CABLE 4.5M
ON
MICROPHONE HOLDER
FOR SERVICE DR-30 1
)
Microphone cable
XLR TYPE CONNECTOR 1/4" PHONE PLUG
DOUBLE CONDUCTOR SHIELD
MICROPHONE CABLE (4.5M)
SCREW ADAPTER
(5/8"--27, 3/6"--18)
1
2
DR-30/50/80C
DR-50
DR-50:Cardioid Dynamic Microphone
Specifications
Type
Dynamic
Frequency Response / Output Impedance
90Hz-16,000Hz / 300 ohm
Polar Patterns / Sensitivity
Hyper Cardioid / -54dB (0 dB=1 V/Pa,1 kHz)
Parts List
SAFETY PRECAUTIONS:
The parts marked have
safety-related characteristics. Use
only listed parts for replacement.
NOTE: The parts marked # are new. (initial parts)
Due to one or more of the following reasons,
parts with parts code ******** cannot be supplied as service parts.
• Part supplied only as a component in a complete assembly
• Copyright does not permit the part to be supplied
• Part is sold commercially
The description "Q'TY" means a necessary number of the parts per one product.
Dimensions (dia head x length x dia grip) /
Weight
50mm x 192.5mm x 22mm / 355g
ACCESSORIES (STANDARD)
Microphone cable (4.5M) : (#04010078)
Microphone holder : (#03896589)
Screw adapter (Convert 5/8”--27 into 3/8”--16) : (#03897278)
Carring case : (#03896590)
* In the interest of product improvement, the specifications and / or appearance of
this unit are subject to change without prior notice.
fig.part1e
CASING
FINISHED GOODS
ACCESSORIES (STANDARD)
#
# 03896590 MIC CASE 1
# 03896823 OWNER’S MANUAL ENGLISH/JAPANESE 1
# 03897278 SCREW ADAPTOR 1
# 04010078
03896612
SK000172
03896589 MIC HOLDER 1
WIND SCREEN
WIND SCREEN (MESH HEAD) DR-50 1
FINISHED GOODS (#08887 DR-50)
CONNECT CORD SHIELD CABLE 4.5M
MICROPHONE HOLDER
FOR SERVICE
Microphone cable 4.5M
XLR TYPE CONNECTOR 1/4" PHONE PLUG
DOUBLE CONDUCTOR SHIELD
MICROPHONE CABLE (4.5M)
SCREW ADAPTER
(5/8"--27, 3/6"--18)
DR-50 1
1
3
May/2005
DR-80C
DR-80C:Cardioid Capacitor Microphone
Specifications
Type
Condenser
Frequency Responce / Output Impedance
20Hz-20,000Hz / 200 ohm
Polar Patterns / Sensitivity
Cardioid / -32 dB (dB=1 V/Pa,1 kHz)
Parts List
Dimensions (dia head x length x dia grip) /
Weight
52mm x 158mm x 21mm / 345g
ACCESSORIES(STANDARD)
Shock-mount holder :(#03896634)
Screw adapter (Convert 5/8”--27 into 3/8”--16) : (#03897278)
Carring case : (#03896590)
* In the interest of product improvement, the specifications and / or appearance of
this unit are subject to change without prior notice.
SAFETY PRECAUTIONS:
The parts marked have
safety-related characteristics. Use
only listed parts for replacement.
NOTE: The parts marked # are new. (initial parts)
CASING
FINISHED GOODS
ACCESSORIES(STANDARD)
#
# 03896634 MIC HOLDER 1
# 03896834 OWNER’S MANUAL ENGLISH/JAPANESE 1
# 03897278 SCREW ADAPTOR 1
04010367
SK000173
03896590 MIC CASE 1
Due to one or more of the following reasons,
parts with parts code ******** cannot be supplied as service parts.
• Part supplied only as a component in a complete assembly
• Copyright does not permit the part to be supplied
• Part is sold commercially
The description "Q'TY" means a necessary number of the parts per one product.
WIND SCREEN (MESH HEAD) DR-80C 1
FINISHED GOODS (#08887 DR-80C)
FOR SERVICE
DR-80C 1
SHOCK-MOUNT HOLDER
WIND SCREEN
SCREW ADAPTER
(5/8"–27, 3/8"–16)
4
Loading...