Please read and keep all safety, security, and use instructions.
ab
s
START HERE
SOFTWARE UPDATE REQUIRED:
Before setup, you MUST make sure your soundbar
software is up-to-date. Refer to your online owner’s guide for
more information:
Bose Soundbar 500: worldwide.Bose.com/Support/SB500
Bose Soundbar 700: worldwide.Bose.com/Support/SB700
SoundTouch 300 soundbar: global.Bose.com/Support/ST300
CAUTION: Do NOT set up the surround speakers without
first updating your soundbar. Failure to do so can
damage the surround speakers.
ENGLISH
Choose your setup method
Your setup method depends on which soundbar you have.
Bose Soundbar 500 and Bose Soundbar 700: See method 1.
SoundTouch 300 soundbar: See method 2.
METHOD 1
BOSE SOUNDBAR 500 OR BOSE SOUNDBAR 700
Set up using the Bose Music app
a. In the Bose Music app, from the My Bose screen, tap your soundbar.
b. Tap the soundbar image in the bottom-right corner of the screen.
c. Ta p Settings > Accessory Speakers > Add Bose Accessory Speakers.
d. Follow the app instructions.
New to Bose Music app?
Download the app and follow the app instructions to
set up your soundbar and surround speakers.
ENGLISH
METHOD 2
SOUNDTOUCH 300 SOUNDBAR
ab
Connect your adapters
a. Insert the color-coded speaker cable wires into their
corresponding terminals.
b. Turn the screws to the right (clockwise) to secure the wires into
the terminals.
c. Repeat steps a and b to connect your other adapter.
ENGLISH
Attach the base to the speakers
a. Place the base into the bottom of the speaker. The base should fit flush
into your speaker with the wire terminals facing the back.
b. Attach the base to the speaker using the screwdriver to turn the screw
on the bottom of the base to the right (clockwise) until seated.
METHOD 2
(CONTINUED)
c
Identify switch settings on wireless receivers
a. Confirm that the switch on one wireless receiver is set to R (right).
b. Confirm that the switch on the other wireless receiver is set to L (left).
d
Connect your rear speakers
a. Insert the adapter into the back of the speaker.
b. Insert the two-pin connector into the wireless receiver.
c. Repeat steps a and b to set up your other speaker.
ENGLISH
METHOD 2
(CONTINUED)
e
Place your rear speakers and wireless receivers
a. Facing your TV, place the speaker and R wireless receiver on the right
side of your room.
b. Facing your TV, place the speaker and L wireless receiver on the left side
of the room.
c. Connect to power.
ENGLISH
f
Connect the surround speakers to the soundbar
a. On your SoundTouch 300 remote control, press e.
b. Press and hold G until l on the soundbar blinks white.
Once the surround speaker connects, you hear a tone and l
glows white.
NOTE: Connecting may take several minutes.
METHOD 2
(CONTINUED)
g
ADAPTiQ
Set up ADAPTiQ audio calibration
a. Connect the ADAPTiQ headset (included with the soundbar) to the
soundbar’s a connector.
b. Put the headset on your head.
h
Run ADAPTiQ audio calibration
a. On your SoundTouch 300 remote control, press e.
b. Press and hold H until g and l on the soundbar glow green.
NOTE: To cycle through languages, press d and c on the
navigation pad.
ENGLISH
Lea y conserve todas las instrucciones de uso, protección y seguridad.
ab
s
COMENZAR AQUÍ
SE REQUIERE ACTUALIZAR EL SOFTWARE:
Antes de realizar la configuración, DEBE asegurarse de que elsoftware
de la barra de sonido esté actualizado. Consulte la guía del usuario en
línea para obtener más información:
Bose Soundbar 500: worldwide.Bose.com/Support/SB500
Bose Soundbar 700: worldwide.Bose.com/Support/SB700
SoundTouch 300 soundbar: global.Bose.com/Support/ST300
PRECAUCIÓN: NO configure los altavoces envolventes sin primero
actualizar la barra de sonido. Si no lo hace puede
estropear los altavoces envolventes.
ESPAÑOL
Elegir el método de configuración
El método de configuración depende de la barra de sonido que tenga.
Bose Soundbar 500 y Bose Soundbar 700: Vea el método 1.
Barra de sonido SoundTouch 300: Vea el método 2.
MÉTODO 1
BOSE SOUNDBAR 500 O BOSE SOUNDBAR 700
Configurar usando la aplicación Bose Music
a. En la aplicación Bose Music, en la pantalla Mi Bose, toque la barra de sonido.
b. Toque la imagen de la barra de sonido en la esquina inferior derecha de la pantalla.
c. Toque Configuración > Altavoces accesorios > Agregar altavoces accesorios Bose.
d. Siga las instrucciones de la aplicación.
¿Es la primera vez que usa la aplicación Bose Music?
Descargue la aplicación y siga las instrucciones de la aplicación para
configurar la barra de sonido y los altavoces envolventes.
ESPAÑOL
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.