Bose Sub2 Powered Bass Module, Sub1 Powered Bass Module Owner’s Guide

Sub1 & Sub2

Powered Bass Modules

Owner's Guide

Important Safety Instructions

PRO.BOSE.COM

Please read and keep all safety and use instructions.

Important Safety Instructions

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer or sold with the apparatus­ . When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

Use at altitude less than 2000 meters only.

such as lighted candles, on or near the product.

•To reduce the risk of fire or electrical shock, do NOT expose the product to rain, liquids, or moisture.

•Do NOT expose this product to dripping or splashing and do not place objects filled with liquids, such as vases, on or near the product.

•Do NOT use a power inverter with this product.

•Provide an earth connection or ensure the socket outlet incorporates a protective earthing connection before connecting the plug to the mains socket outlet.

•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Regulatory Information

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.

				Power Modes
	Required Power State Information
				Standby		Networked
						Standby
	Power consumption in specified power mode, at			≤0.5 W		N/A*
	230V/50Hz input
	Time after which equipment is automatically			4 hours		N/A*
	switched into mode
	Power consumption in networked standby if all
	wired network ports are connected and all wireless				N/A*
	network ports are activated, at 230V/50Hz input
			*Product does not utilize a networked
	Network port deactivation/activation procedures.		standby mode for a Bluetooth®
	Deactivating all networks will enable standby		connection and does not have the
	mode.		ability to be configured to a network
				via Wi-Fi® or Ethernet
		Sub1		Sub2
	Dimensions (H × W × D)	53.0 × 25.0 × 53.0 cm		69.0 × 30.5 × 55.0 cm
		(20.9 × 9.8 × 20.9 in)		(27.2 ×12.0 × 21.7 in)
	Net Weight	16.1 kg		23.4 kg
		(35.5 lb)		(51.7 lb)
	Input Rating	100–240 VAC, 3 A, 50/60 Hz		100–240 VAC, 4 A, 50/60 Hz
	Initial turn on inrush	14.9 A at 120 V; 29.3 A at 230 V		15.2 A at 120 V; 28.6 A at 230 V
	current
	Inrush current after AC	5.8 A at 120 V; 32.0 A at 230 V		2.6 A at 120 V; 6.1 A at 230 V
	mains interruption of 5 s

Shielded cables are required to maintain regulatory compliance. The product label is located on the bottom of the product.

Model: 431389G1 / 431389G2. The CMIIT ID is located on the bottom of the product.

	This symbol on the product means there is a tip-over hazard when using a pole	CAN ICES-3 (B)/NMB-3(B)
	mount.	Information About Products That Generate Electrical Noise (FCC Compliance Notice for US)
		NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
	Do not alter, modify, or remove the sliding cover over the power input of the Sub1/	device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
		protection against harmful interference in a residential installation. This equipment generates,
	Sub2. There is uninsulated, dangerous voltage within the product enclosure that
		uses, and can radiate radio frequency energy and, if not installed and used in accordance with
	may present a risk of electrical shock.
		the instructions, may cause harmful interference to radio communications. However, there is
	• The pole-mount M20 threaded insert on the Sub1 and Sub2 is designed to support a
		no guarantee that interference will not occur in a particular installation. If this equipment does
	pole of up to 1.3 meters (51 inches) with a Bose S1 Pro mounted on the pole. Do not use	cause harmful interference to radio or television reception, which can be determined by turning
	the Sub1 or Sub2 with a pole exceeding 1.3 meters (51 inches) in height or a loudspeaker	the equipment off and on, the user is encouraged to try to correct the interference by one or
	weight that exceeds 7.1 kilograms (15.7 pounds). Using a pole/loudspeaker combination	more of the following measures:
	that exceeds either of these limits or creates an unstable mounting scenario may lead to	• Reorient or relocate the receiving antenna.
	a hazardous condition that could result in injury.	• Increase the separation between the equipment and receiver.
	• Do NOT make unauthorized alterations to this product.	• Connect the equipment into an outlet on a circuit different from that to which the
	• Do NOT use in vehicles or boats.	receiver is connected.
		• Consult the dealer or an experienced radio/TV technician for help.
	• Do NOT place the product in a confined space such as in a wall cavity or in an enclosed
		Changes or modifications not expressly approved by Bose Corporation could void the user’s
	cabinet while in use.
		authority to operate this equipment.
	• Keep the product away from fire and heat sources. Do NOT place naked flame sources,
	2 • English	Sub1/Sub2 Powered Bass Module • Owner's Guide

PRO.BOSE.COM

Important Safety Instructions

This device complies with part 15 of the FCC Rules and with ISED Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper

disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product,

contact your local municipality, disposal service, or the shop where you bought this product.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

		Lead	Mercury	Cadmium	Hexavalent	Polybrominated	Polybrominated
	Part Name	(Pb)	(Hg)	(Cd)	(CR(VI))	Biphenyl (PBB)	diphenylether
							(PBDE)
	PCBs	X	O	O	O	O	O
	Metal Parts	X	O	O	O	O	O
	Plastic	O	O	O	O	O	O
	Parts
	Speakers	X	O	O	O	O	O
	Cables	X	O	O	O	O	O
	This table is prepared in accordance with the provisions of SJ/T 11364.

O:Indicates that this toxic or hazardous substance contained in all of the homogeneous­ materials for this part is below the limit requirement of

GB/T 26572.

X:Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table

Equipment name: Sub1/Sub2 Type designation: 431389G1 / 431389G2

Restricted substances and its chemical symbols

	Unit	Lead	Mercury	Cadmium	Hexavalent	Polybrominated	Polybrominated
		(Pb)	(Hg)	(Cd)	chromium	biphenyls (PBB)	diphenyl ethers
					(Cr+6)		(PBDE)
	PCBs	−	○	○	○	○	○
	Metal Parts	−	○	○	○	○	○
	Plastic	○	○	○	○	○	○
	Parts
	Speakers	−	○	○	○	○	○
	Cables	−	○	○	○	○	○

Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. For service or importer information, call [phone]

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: [phone]

Bose Corporation Headquarters: 1-877-230-5639 Wi-Fi is a registered trademark of Wi-Fi Alliance®

Bose, L1, and SubMatch are trademarks of Bose Corporation.

All other trademarks are the property of their respective owners. The Bose Privacy Policy is available on the Bose website.

©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.

Please complete and retain for your records.

The serial and model numbers are located on the product label on the bottom of the product.

Serial number: ____________________________________________________

Model number: ___________________________________________________

Warranty Information

This product is covered by a limited warranty.

For warranty details, visit global.bose.com/warranty.

Owner's Guide • Sub1/Sub2 Powered Bass Module

English • 3

Contents	PRO.BOSE.COM
Overview	5
Package Contents......................................................................................................................................................................................	5
Optional Accessories................................................................................................................................................................................	5
Setup	6
Connections and Controls......................................................................................................................................................................	6
Connecting Power.....................................................................................................................................................................................	7
Connecting Directly to a Power Outlet.....................................................................................................................................	7
Connecting to an L1 Pro32 with a SubMatch Cable.............................................................................................................	8
AutoOff/Low-power Standby.......................................................................................................................................................	8
Inputs and Outputs...................................................................................................................................................................................	9
Line Input...............................................................................................................................................................................................	9
Line Output...........................................................................................................................................................................................	9
Settings..........................................................................................................................................................................................................	9
Phase/Pattern......................................................................................................................................................................................	9
Level.......................................................................................................................................................................................................	10
Line Input EQ.....................................................................................................................................................................................	10
Line Output EQ.................................................................................................................................................................................	10
Sub1/Sub2 Orientation...........................................................................................................................................................................	10
Using the Pole-mount Insert with an S1 Pro............................................................................................................................	11
Care & Maintenance	12
Cleaning Your Sub....................................................................................................................................................................................	12
Troubleshooting.........................................................................................................................................................................................	12

4 • English

Sub1/Sub2 Powered Bass Module • Owner's Guide

PRO.BOSE.COM

Overview

Overview

Package Contents

Sub1

Sub2

Optional Accessories

•Sub1/Sub2 Roller Bag

•Sub1/Sub2 Adjustable Speaker Pole

•SubMatch Cable

For additional information on Sub1/Sub2 accessories, visit PRO.BOSE.COM.

Owner's Guide • Sub1/Sub2 Powered Bass Module

English • 5