Bose AM316536 User Manual
SOUNDDOCK® 10
DIGITAL MUSIC SYSTEM
Bluetooth
Owner’s Guide
®
Dock
English
Safety information
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you
set up and operate your system properly and enjoy its advanced features. Please save this
owner’s guide for future reference.
WARNINGS:
• To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
• Do not expose this apparatus to dripping or splashing, and do not place objects filled with
liquids, such as vases, on or near the apparatus. As with any electronic products, use care
not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.
• Do not place any naked flame sources, such as lighted candles, on or near the apparatus.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3.
Notes:
• This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations (Canada only).
• If applicable, the radio communication device incorporated into this apparatus meets all
requirements of the Industry Canada standard RSS-310 (Canada only).
• The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
This product conforms to the EMC Directive 2004/108/EC and to the Low Voltage
Directive 2006/95/EC. The complete Declaration of Conformity can be found at
www.Bose.com/static/compliance/index.html.
2
English
Compliance with FCC rules (U.S.A. only)
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, you are encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• Proper connections must be used for connection to a host computer and/or peripherals
in order to meet FCC emission limits.
3
English
A
B
C
Overview
The Bose® SoundDock® 10 Bluetooth® dock adds Bluetooth wireless
technology capability to your SoundDock
After installing this accessory, you can listen to your stereo Bluetooth
music phone with high-quality, room-filling sound.
To experience the intended performance, your stereo Bluetooth music
phone must support the Bluetooth Advanced Audio Distribution Profile
(A2DP).
®
10 digital music system.
Installing the Bluetooth dock
1. Disconnect the SoundDock 10 power cord from the AC outlet.
2. Lift up the back edge of the universal dock adapter (A) and remove it
from the dock. You may need to insert a thin non-metallic utensil into
the slot to provide the required leverage to lift the back edge.
3. Press the dock release button (B) on the right and lift up (C) the right
side of the dock to remove it.
4
English
A
B
Bluetooth light
(flashing = discoverable mode)
4. Slide the left end of the Bluetooth® dock into the dock opening (A).
5. Press down on the right side of the dock until it locks in place (B).
Making the first connection
1. Plug the power cord of the SoundDock® 10 digital music system into
an AC receptacle.
2. Wait until the Bluetooth
®
tooth
dock is in discoverable mode.
NOTE: The dock stays in discoverable mode (for as long as 30 minutes) until you connect your stereo Bluetooth music phone to it.
®
light starts flashing, meaning that the Blue-
5
Loading...