Page 1
BOSE® AE2 AUDIO HEADPHONES
| | |
| |
Page 2
English
Tab 5, 11Tab 4, 10Tab 3, 9Tab 2, 8
Limited Warranty
Your Bose headset is covered by a limited warranty. Details of
the limited warranty are provided on the product registration card
that is included in the carton. Please refer to the card for
instructions on how to register. Failure to register will not affect
your limited warranty rights.
What you must do to obtain Limited Warranty Service:
Return product, with proof of purchase from an authorized Bose
dealer, using the following procedures:
1. Contact the Bose organization in your country/region (visit
Global.Bose.com/register for Bose contact information in
your country/region) for specific return and shipping
instructions;
2. Label and ship the product, freight prepaid, to the address
provided by the Bose organization in your country; and
3. Place any necessary return authorization number
prominently on the outside of the carton. Cartons not
bearing a return authorization number, where required, will
be refused.
Note: The serial number is located inside the right earcup.
Safety Information
Please take the time to follow the instructions in this owner’s
guide carefully. It will help you set up and operate your product
properly and enjoy its advanced features. Please save this
owner’s guide for future reference.
CAUTIONS
• Long-term exposure to loud music may cause hearing dam-
age. Please avoid extreme volume when using headphones,
especially for extended periods.
• Do not use headphones when operating a motor vehicle or
anywhere the inability to hear outside sounds may present a
danger to you or others.
• Sounds that you rely on as reminders or warnings may have an
unfamiliar character when using headphones. Be aware of
how these sounds may vary in character so you can recognize
them as needed.
• Do not drop, sit on or allow the headphones to be immersed in
water.
WARNING: DO NOT use mobile phone adapters to connect
headphones to airplane seat jacks as this could result in personal
injury such as burns or property damage due to overheating.
Remove and disconnect immediately if you experience warming
sensation or loss of audio.
1
Page 3
Tab 5, 11 Tab 4, 10 Tab 3, 9 Tab 2, 8
Replaceable audio cable
Replaceable
earcup
cushions
1
/8” (3.5
mm) plug
Adjustable
headband
L or R mark
English
Introduction
Thank you for purchasing the Bose AE2 audio headphones. With
the improved performance of Bose AE2 audio headphones, you
can immerse yourself in your music and enjoy an around ear fit
that stays comfortable for hours.
Components
Wearing the headphones
Put on the headphones using the markings which identify the left
(L) and right (R) earcups. Adjust the headband so it rests gently
on top of your head and the earcup cushions fit comfortably
around your ears.
Connecting to an audio device
Ensure the smaller 2.5 mm plug is securely inserted into the left
earcup. Plug the other end of the cable securely into the audio
output jack of the selected audio device, such as an MP3 player,
computer, or home stereo. (With some home stereo equipment,
a separate 1/4 inch (6.3 mm) adapter may be needed.)
Folding Earcups
The Bose AE2 audio headphones feature rotating earcups that
fold flat for easy, convenient storage.
CAUTION: The earcups rotate in only one direction. Incorrectly
rotating the earcups can damage the headphones.
2
Page 4
English
Tab 5, 11Tab 4, 10Tab 3, 9Tab 2, 8
Cleaning the headphones
The Bose AE2 audio headphones do not require scheduled
cleaning. Should cleaning be necessary, simply wipe the outside
surfaces with a soft cloth. Be sure the earcup ports are kept
clear, and that no moisture is allowed to get inside the earcup.
Replacement parts and accessories
Accessories or replacement parts can be ordered through Bose
Customer Service. See the contact information for your area
included in this guide.
Part Product Code
Carry bag: 329585-0010
Replacement cushions: 329586-0010
Replacement cable: 329583-0010
Reattaching earcup cushions
The earcup cushions are held in place
by a mounting flange which snaps
under 8 small tabs located around the
inside rim of each earcup. If an earcup
cushion becomes partially or
completely detached, push the
mounting flange of the earcup cushion
back into the earcup. Using your finger
or thumb, press around the edge of the
mounting flange, making sure it snaps
in place all the way around the earcup.
Troubleshooting
Problem What to do
No audio or audio in
one earcup only
Distorted bass • Ensure both ear cushions are firmly
Mis-shaped cushion • The high-density earcup foam will
If any problem persists, contact Customer Service. See the
phone number for your area included in this guide.
• Ensure both ends of the audio cable
are firmly seated.
• Try a different audio device
secured.
regain its shape after a few minutes in
a neutral position.
3
Page 5
English
Tab 5, 11Tab 4, 10Tab 3, 9Tab 2, 8
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part
Lead
Mercury
Cadmium
Name
(Pb)
PCBs
Metal
parts
Plastic
parts
Speakers
Cables
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T
11363-2006.
(Hg)
X0 0 0 0 0
X0 0 0 0 0
00 0 0 0 0
X0 0 0 0 0
X0 0 0 0 0
(Cd)
Hexavalent
(CR(VI))
Polybrominated
Biphenyl (PBB)
Polybrominated
diphenylether (PBDE)
4
Page 6
©2010 Bose Corporation, The Mountain,
| | |
| |
Framingham, MA 01701-9168 USA
AM329539 Rev.01
Loading...