Page 1
®
SOUNDLINK
WIRELESS MOBILE SPEAKER
Owner’s Guide | Guía de usuario | Notice d’utilisation
Page 2
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Please read this owner’s guide
Please take the time to follow the instructions in this
owner’s guide carefully. It will help you to properly use your
new Bose
owner’s guide for future reference.
®
product and enjoy its features. Please save this
The lightning flash with arrowhead symbol within an
equilateral triangle alerts the user to the presence
of uninsulated, dangerous voltage within the
system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
alerts the user to the presence of important
operating and maintenance instructions in this
owner’s guide.
WARNINGS and CAUTIONS
• To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The product shall not be
exposed to dripping or splashing, and objects filled with
liquids, such as vases, shall not be placed on or near the
product. As with any electronic products, use care not to
spill liquids into any part of the product. Liquids can cause
a failure and/or a fire hazard.
2
• The power supply must be used indoors only. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.
• Make no modifications to the product or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, and system performance, and
may void the warranty.
• Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain
readily operable.
• Do not place any naked flame sources, such as lighted
candles, on or near the apparatus.
• The battery is only intended for use with the power supply
or charger provided with the system. Refer to charging
instructions in the system owner’s guide. Do not continue
charging the battery if it does not reach full charge within
the 10 hours. Overcharging may cause the battery to
become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery.
• Do not attempt to charge the battery in temperatures
outside the range of 32°-104°F (0°-40°C).
• Keep batteries out of the reach of children and pets.
• If the battery begins to leak, do not allow the liquid to
come in contact with your skin or eyes. If contact has been
made, wash the affected area with plenty of water and
seek medical advice immediately.
Tab 3, 11
EnglishTab2 , 1 0
Page 3
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
• Do not expose the product or battery to excessive heat,
including direct sunlight or fire and storage or use inside
cars in hot weather, where it can be exposed to temperatures in excess of 140°F (60°C). Doing so may cause the
battery and power supply to generate heat, rupture, or
ignite. Using the product in this manner also may result in
a loss of performance and a shortened life expectancy.
• If the battery is damaged and ignites, do not use water
to extinguish flames. Instead, use a functioning fire
extinguisher.
• Do not step on, throw, or drop batteries or the power
supply or expose them to a strong shock. Do not pierce,
crush, dent, or deform the batteries or power supply in any
way. If either becomes deformed, properly dispose of it.
• Do not short-circuit batteries. Avoid storing them around
metal objects such as keys, pocket change, paper clips,
and jewelry.
• Do not dismantle, open, or shred the battery.
• The battery is intended to be used only with the Bose
product and the power supply provided, or Bose power
supply or charger designed for use with this product.
• This product is intended to be used only with the power
supply provided, or Bose power supply or charger
designed for use with this product.
• The cells in the batteries perform best when operating at
normal room temperature, 70°F (20°C).
Tab 6, 14
Tab 8, 16Tab2, 7, 15
SAFETY INFORMATION
®
• Replace the SoundLink
genuine replacement battery from Bose or an authorized
Bose dealer. Bose cannot warrant the safety and compatibility or assure the operability of batteries from other
manufacturers for use in operating the SoundLink
system. DO NOT attempt to use the SoundLink
battery to power other electronics. Doing so may result in
permanent damage to your system and/or personal injury.
• Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when listening
to audio for extended periods.
This product contains magnets which can be harmful
to pacemaker wearers.
To return a system battery for recycling, contact Bose
or your Bose dealer. In the United States only, call
1-800-905-2180 or visit the Bose
www.Bose.com. For other regions, see the contact
information included in the carton.
This product conforms to all EU Directive
requirements as applicable by law.
The complete Declaration of Conformity can
be found at www.Bose.com/static/compliance
system battery only with a
®
®
system
Please dispose of a used or
damaged battery promptly
and properly, following all
local regulations.
Do not incinerate.
®
website at
3
Page 4
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Important Safety Instructions
1. Read these instructions –
this product.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the owner’s
guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture –
Do not use this product near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, near a
swimming pool, or anywhere else that water is present.
6. Clean only with a dry cloth – and as directed by Bose
Corporation. Unplug this product from the wall outlet
before cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions – To
ensure reliable operation of the product and to protect
it from overheating, put the product in a position and
location that will not interfere with its proper ventilation.
For example, do not place the product on a bed, sofa,
or similar surface that may block the ventilation
openings. Do not put it in a built-in system, such as a
bookcase or a cabinet that may keep air from
flowing through its ventilation openings.
8. Do not install near any heat sources, such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
4
for all components before using
9. Only use attachments/accessories specified by the
10. Protect the power cord from being walked on or
11. Unplug this apparatus during lightning storms or
12. Refer all servicing to qualified service personnel.
13. To prevent risk of fire or electric shock, avoid
14. Do not let objects or liquids enter the product – as
15. See product enclosure for safety-related markings.
Tab 3, 11
manufacturer.
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
when unused for long periods of time – to prevent
damage to this product.
Servicing is required when the apparatus has been
damaged in any way: such as power supply cord or
plug is damaged; liquid has been spilled or objects
have fallen into the apparatus; the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped – Do not attempt to
service this product yourself. Opening the enclosure
may expose you to dangerous voltages or other
hazards. Please call Bose to be referred to an
authorized service center near you.
overloading wall outlets, extension cords, or integral
convenience receptacles.
they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
EnglishTab2 , 1 0
Page 5
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
16. Use proper power sources – Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
Information about products that
generate electrical noise
The SoundLink® Wireless Mobile speaker complies with
FCC and Industry Canada RF radiation exposure limits set
forth for general population. The system must not be colocated or operating in conjunction with any other antennas
or transmitters.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
U.S.A. only
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
this is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or
more of the following measures:
Tab 6, 14
Tab 8, 16Tab2, 7, 15
SAFETY INFORMATION
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Any changes to this device not expressly approved by
Bose Corporation may void the user’s authority to operate
this device.
Canada
• This digital apparatus complies with the Canadian
ICES-003 Class B specification.
• The radio communication device incorporated into this
apparatus meets all requirements of the Industry Canada
standard RSS-210..
5
Page 6
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Tab 3, 11
EnglishTab2 , 1 0
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part
Lead
Mercury
Cadmium
Hexavalent
Name
(Pb)
(Hg)
PCBs
X0 0 0 0 0
Metal
X0 0 0 0 0
parts
Plastic
00 0 0 0 0
parts
Speakers
X0 0 0 0 0
Cables
X0 0 0 0 0
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T 113 63-2006.
(Cd)
(CR(VI))
Polybrominated
Biphenyl (PBB)
Polybrominated
diphenylether
(PBDE)
6
Please complete for your records
Serial number
(on the back panel of the product): _______________________
Purchase date: ________________________________________
Dealer name: __________________________________________
Dealer phone: _________________________________________
Please keep your sales receipt with this owner’s guide.
Page 7
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 8
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 8
Opening the cover . . . . . . . . . . . . . . . . . 9
Placing the speaker . . . . . . . . . . . . . . . 10
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to AC power . . . . . . . . . . . 11
System status indicators . . . . . . . . . . . 13
Control buttons . . . . . . . . . . . . . . . . . . . 14
Pairing with Bluetooth® devices . . . . . . 15
Adding another source . . . . . . . . . . . . . 18
Operating on battery power . . . . . . . . . 19
MAINTENANCE AND CARE . . . . . . . . . . . . . 20
Replacing the battery . . . . . . . . . . . . . .20
Troubleshooting . . . . . . . . . . . . . . . . . . .21
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .24
Contacting customer service . . . . . . . . .24
Limited warranty . . . . . . . . . . . . . . . . . .24
Technical information . . . . . . . . . . . . . .25
7
Page 8
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
Power supply
3.5 mm stereo cable
SoundLink
®
Wireless
Mobile speaker
INTRODUCTION
Tab 3, 11
EnglishTab2 , 1 0
Overview
Thank you for purchasing the SoundLink®
Wireless Mobile speaker. Enjoy music
wirelessly from your smartphone, tablet,
laptop, or other Bluetooth
®
enabled device
anywhere you choose.
Features
• Wireless Bluetooth link eliminates the need
to dock or physically connect your
Bluetooth device.
• Rechargeable lithium-ion battery provides
hours of Bose
®
performance.
• Integrated cover enables easy grab-and-go
mobility.
Unpacking
Check the carton for the SoundLink® Wireless
Mobile speaker, power supply, and 3.5 mm
stereo cable. Save the carton and packing
materials in case they are needed to ship the
product.
8
If any part of the product appears to be
damaged, do not attempt to use it. Contact
your authorized Bose dealer immediately or
call Bose Customer Service. Refer to the
contact list enclosed in the carton for contact
information.
Page 9
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
INTRODUCTION
Opening the cover
When closed, the cover protects the
SoundLink
damage. When opened, the cover serves as
a stand for the speaker. No sound is emitted
from the speaker unless the cover is opened.
To open the cover
1. Pull on the fabric tab imprinted with the
Bose
®
Wireless Mobile speaker from
®
logo.
2. Swing the cover down and under the unit.
When you close the cover, magnets hold it in
place. If you close the cover while audio is
playing, the speaker turns itself off.
9
Page 10
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
INTRODUCTION
Tab 3, 11
EnglishTab2 , 1 0
Placing the speaker
When using your SoundLink® Wireless Mobile
speaker indoors, the tonal quality can vary
depending on where the speaker is placed
in a room. When moving the speaker around
within a room or from room to room, keep the
following guidelines in mind:
• The speaker is designed to sound best
when placed on a shelf, counter, desk, or
tabletop that is 24 to 48 inches high.
• For best bass response, the speaker should
be placed near a wall; bass response
decreases as the speaker is placed closer
to the center of a room.
• When operating the speaker, always use the
cover as a stand. Do not lay the speaker on
its back. Sound is emitted from both the
front and rear of the unit.
10
• The speaker should not be placed in small
areas that are enclosed on all sides except
the front, as this will adversely affect sound
quality.
• Do not place the speaker on wet or dirty
surfaces. Doing so could transfer dirt, sand,
or moisture onto the speaker when the
cover is closed.
If you are using your speaker outdoors, you
should expect the tonal quality to change as
you move farther from the speaker.
Page 11
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
AC
Power
pack
A. Unfold prongs
adapter
B. Slide AC adapter into power pack
Connecting to AC power
Before using your new SoundLink® Wireless
Mobile speaker the first time, you should
connect it to AC (mains) power.
To connect to AC power
1. Depending on your region of the world, do
one of the following to prepare your power
pack for use:
A. Unfold the prongs from the power
pack body
OR
B. Slide the AC adapter for your region
into the power pack.
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
11
Page 12
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
2. Plug the DC power cord on the power
supply into the DC connector on the
SoundLink
®
speaker.
3. Plug the power supply into a live AC
(mains) outlet.
12
A tone is emitted from the speaker to confirm
connection to AC power, and charging
begins.
You can immediately use your SoundLink
®
speaker once it is connected to AC power.
Page 13
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
System status indicators
The status indicators, located on the front of
the SoundLink
when a source or feature is activated.
Indicates the speaker is playing the
source connected to the (AUX) input.
®
speaker, illuminate to indicate
Tab 6, 14
Indicates the SoundLink
when the Bluetooth
®
source is selected:
Tab 8, 16Tab2, 7, 15
OPERATION
®
speaker state
• Discoverable – Speaker is discoverable
and ready to pair with a new device. The
indicator slowly fades on and off approximately once every second.
• Connecting – Speaker is attempting to
connect to a paired device. The
indicator flashes on and off
approximately twice every second.
• Connected – Speaker is connected to
a paired device. The indicator remains
steadily on.
• Disconnected – Speaker is available
to connect to any paired device. The
indicator flashes on and off
approximately once every three
seconds.
See “Pairing with Bluetooth devices” on
page 15 for more information on using
Bluetooth wireless technology.
13
Page 14
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
Indicates the battery power level. See
“Operating on battery power” on
page 19 for more information on
reading the indicator.
Flashes to indicate when the sound is
muted.
14
Control buttons
The control buttons are located on the top of
the speaker.
• Press to turn the speaker on or off.
• Press and hold to check the battery
charge state (see “Checking the
battery” on page 19).
Press to select the source connected
to the (AUX) input. See “Adding
another source” on page 18.
• Press to select the Bluetooth
source. The speaker attempts to
connect to the last paired device.
See “Pairing with Bluetooth
devices” on page 15.
• Press and hold for 3 seconds to set
the speaker to discoverable mode
and allow pairing with another
Bluetooth
®
device.
®
Page 15
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
• When a device is connected,
press to disconnect the device.
The SoundLink
®
speaker then waits
for a paired device to connect.
When the Bluetooth source is selected, and
no device connects within 30 minutes, the
speaker turns itself off.
Mutes sound from the speaker.
Plus increases speaker volume.
Minus decreases speaker volume.
The source indicator on the front
panel flashes once each time the
button is pressed. The indicator
flashes twice when maximum or
minimum volume is reached.
Pairing with Bluetooth® devices
Pairing occurs when two Bluetooth devices
communicate with each other and establish a
connection. A record of information about this
connection is then stored in the memory of
each device. Once you pair a device with the
SoundLink
pair it again.
The SoundLink® speaker can pair with up to
six Bluetooth devices. However, it can only
connect to, and play audio from one device at
a time.
To begin pairing with a Bluetooth device
1. With the Bluetooth device and the
®
speaker, you should not have to
SoundLink
®
speaker both turned on,
press and hold the Bluetooth button on
the speaker for three seconds to make the
speaker discoverable.
15
Page 16
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
The Bluetooth® indicator on the
SoundLink
®
speaker slowly fades on and
off approximately once every second to
show that the speaker is discoverable.
2. Set your Bluetooth device to “discover”
the SoundLink® speaker, then locate the
Bluetooth device list.
3. From the Bluetooth device list, select the
device named “Bose SoundLink.”
4. If your device asks for a passkey, enter
digits 0000 (four zeros) and press OK.
Some devices also ask you to accept
the connection.
Yo ur Bluetooth device indicates when
pairing is complete. The SoundLink
®
speaker speaker indicates pairing is
complete when the Bluetooth indicator
stops fading on and off and remains
steadily on.
16
To connect a device
To connect a previously paired device, press
the Bluetooth button on the SoundLink
®
speaker. The Bluetooth indicator on the
speaker flashes on and off approximately
twice every second until the device connects.
Then the indicator stops flashing and remains
steadily on when the speaker and device
have successfully connected.
To pair additional devices
With the Bluetooth device and the
SoundLink
®
speaker both turned on, press
the Bluetooth button on the speaker for three
seconds to make the speaker discoverable
again. Then follow steps 2 - 4 on this page.
Page 17
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
The SoundLink® memory can hold up to six
paired devices. You can pair more than six
devices, but the memory will never contain
more than six. When the memory is full with
six devices and an additional device is paired,
the least recently used device is deleted from
memory and replaced by the newly paired
device.
Clearing memory
To clear the SoundLink
all devices, press and hold the Bluetooth
®
speaker memory of
®
button on the speaker (about 10 seconds)
until you hear a tone.
®
The SoundLink
speaker clears all Bluetooth
devices from its memory and then becomes
discoverable.
17
Page 18
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Adding another source
You can use another audio device, such as
a portable digital music player, with your
SoundLink® speaker. This requires using an
audio cable with a 3.5 mm plug on one end
to connect with the AUX input on the
SoundLink
plug on both ends is provided.
To add a source
1. Plug the cable from the audio device into
2. Press the AUX button.
3. Adjust the volume on the connected
18
®
system. A cable with a 3.5 mm
the (AUX) connector on the back of the
SoundLink
device to near maximum, then use the
SoundLink
®
speaker.
®
speaker volume buttons to
adjust the level.
If a device is connected but not playing audio,
the speaker will turn itself off after 30 minutes.
Service connector
The service connector on the rear of the
speaker is for software updates only and will
not play audio from any connected device.
Tab 3, 11
EnglishTab2 , 1 0
Page 19
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Green: ..............70% or more of full charge
Yellow: .............20% to 70% of full charge
Red: .................20% or less (charge needed)
Yellow: ...... Battery charging
Off: ........... Charging cycle done
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
Operating on battery power
A fully charged battery provides approximately
three hours of use at maximum volume. The
rate of battery discharge varies with the volume
setting. You can extend the battery playback
time by reducing the volume.
Checking the battery
The battery status indicator is normally off to
conserve battery power. To check the charge
level, press and hold the power button and
observe the battery indicator.
Battery protection mode
When the SoundLink
and unused for more than 14 days, it enters
battery protection mode to preserve battery
power. To reactivate the speaker, connect it
to AC (mains) power (see “Charging the
®
speaker is unplugged
Battery,” below). You can immediately use the
system while the battery charges.
Charging the battery
The battery status indicator on the SoundLink
speaker flashes red when the battery needs
charging. The battery can be charged whether
the cover is opened or closed.
To charge the battery
Plug the power cable into the DC POWER
connector on the back panel of the
SoundLink
®
speaker. Then plug the power
pack cord into a live AC (mains) outlet. The
speaker emits a tone to confirm the power
connection. Recommended charging time is
3 hours. The battery status indicator indicates
charging status.
®
19
Page 20
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
MAINTENANCE AND CARE
Replacing the battery
The battery should be replaced when:
• The battery status light remains yellow after
10 hours of charging.
• The period of battery operation noticeably
decreases.
For replacement batteries, contact the
Bose organization in your country/region
(visit http://global.Bose.com for Bose contact
information in your country or region).
20
Tab 3, 11
EnglishTab2 , 1 0
Page 21
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Troubleshooting
Problem What to do
Speaker will
not turn on
(AC power)
Speaker will
not turn on
(battery
power)
Paired
Bluetooth
device will not
connect
SoundLink
speaker
indicates a
connection,
but is not
playing music
• Make sure your system is connected to a working AC (mains) outlet.
• Battery may be in protection mode or discharged – connect to working AC (mains) outlet to
restore the battery to operational mode.
• If your device requires a passkey, make sure the one you entered was correct.
®
• Turn the SoundLink
• Remove the SoundLink
(consult the device owner’s manual for assistance). Then pair the device and the SoundLink®
speaker again.
®
• Turn off or disable Bluetooth on all other paired devices nearby (including Bose® preferred
devices) and reconnect the device you want to hear.
• Turn the SoundLink
®
speaker off and back on.
®
speaker from the pairing list on your Bluetooth device pairing list
®
speaker off and back on.
Tab 6, 14
Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
21
Page 22
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
MAINTENANCE AND CARE
Tab 3, 11
EnglishTab2 , 1 0
Problem What to do
Cannot
pair the
SoundLink
speaker with
my Bluetooth
device
®
• Make sure your SoundLink
(three seconds) until the Bluetooth indicator slowly flashes.
• Make sure the Bluetooth capability of your Bluetooth device is turned on.
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink
®
• Make sure your Bluetooth device supports the transfer of audio.
•Move your Bluetooth device and/or SoundLink
generate electromagnetic interference. Examples are cordless phones, microwave ovens,
®
speaker is discoverable. Press and hold the Bluetooth button
wireless network routers, or other Bluetooth devices.
No audio from
a Bluetooth
device
22
• If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality.
• Turn the SoundLink
• Refer to the owner’s guide, help system, or technical support for your mobile device to learn
how it pairs with other Bluetooth devices.
• Make sure your SoundLink
®
• Make sure your Bluetooth device is playing audio, and the volume is up.
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink
• Turn the SoundLink
®
speaker off and back on.
®
speaker is not muted, and the volume is up.
®
speaker off and back on.
®
®
speaker away from other devices that
®
speaker.
speaker.
Page 23
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
Problem What to do
Poor sound
quality from a
Bluetooth
device
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink
•Move your Bluetooth device and/or SoundLink
®
electromagnetic interference, such as another Bluetooth device, cordless phone, microwave
oven, or wireless router.
• Reduce the number of applications running on your Bluetooth device.
Running multiple applications can reduce the amount of internal resources available to
transmit audio. Closing non-essential applications may improve audio quality.
• Try turning off WiFi to improve audio quality.
• Try unpairing your Bluetooth device from the SoundLink
No audio from
the AUX
source
Poor sound
quality from
the AUX
source
This action can possibly clear issues that might have occurred during initial device pairing.
• Reset the SoundLink
is disconnected and the SoundLink
• Turn the SoundLink
• Make sure your connected device is on and playing.
• Press the AUX button and check that the AUX source indicator is on.
• Make sure the 3 mm plug is fully inserted into the SoundLink
• Increase the volume level on the device.
• Increase the SoundLink
• Reduce the volume level on the AUX source.
• Make sure the 3 mm plug is fully inserted into the SoundLink
®
speaker: Press the mute button for 10 seconds. Your Bluetooth device
®
speaker off and back on.
®
speaker volume.
®
speaker turns off.
®
®
speaker away from any device that generates
®
speaker and then re-pairing the two.
®
speaker.
®
speaker.
speaker.
23
Page 24
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
MAINTENANCE AND CARE
Tab 3, 11
EnglishTab2 , 1 0
Cleaning
To clean the exterior surface of your product,
you can wipe it using a soft, dry cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to
drop into any openings.
Contacting customer service
For questions about the SoundLink® Wireless
Mobile speaker, contact your local Bose
dealer. To contact Bose directly, see the
contact list included with your SoundLink
speaker or visit http://owners.Bose.com.
24
®
Limited warranty
Your SoundLink® Wireless Mobile speaker is
covered by a limited warranty. Details of the
limited warranty are provided on the product
registration card that is included in the carton.
Please refer to the card for instructions on how
to register. Failure to register will not affect
your limited warranty rights.
What you must do to obtain limited
warranty service
Return the product, with proof of purchase
from an authorized Bose dealer, using the
following procedures:
1. Contact the Bose organization in
your country/region
(visit http://global.Bose.com for Bose
contact information) for specific return
and shipping instructions.
Page 25
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
2. Label and ship the product, freight
prepaid, to the address provided by the
Bose organization in your country.
3. Place any necessary return authorization
number prominently on the outside of the
carton. Cartons not bearing a return
authorization number, where required,
will be refused.
Technical information
Power supply rating
Input: 100 - 240VAC, 50/60Hz, 600mA
Output: 17VDC, 1A Max
Input power rating
Input: 17 - 20 VDC, 1A Max
Dimensions
5.1"H x 9.6"W x 1.9"D
(13.0 cm x 24.4 cm x 4.8 cm)
Weight
2.8 lb. (1.3 kg)
Temperature range for use
0° - 45°C (32° - 113°F)
Bluetooth
SoundLink
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Bose Corporation is under
license.
®
QD ID
®
speaker: B017612
25
Page 26
©2011 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM344922 Rev.00
Loading...