Bose 357550-1300, SOUNDLINK 2, SOUNDLINK SLINKMOBILE2 User Manual

Page 1
®
SOUNDLINK
BLUETOOTH® MOBILE SPEAKER II
Owner’s Guide | Brugervejledning | Bedienungsanleitung | Guía de usuario
Notice d’utilisation | Manuale di istruzioni | Felhasználói útmutató | Gebruiksaanwijzing
Podręcznik użytkownika | Guia dos proprietários | Omistajan opas | Bruksanvisningen
Page 2
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you to properly use your new Bose owner’s guide for future reference.
®
product and enjoy its features. Please save this
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in this owner’s guide.
WARNINGS and CAUTIONS
• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The product shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on or near the product. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard.
2
• The power supply must be used indoors only. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
• Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and may void the warranty.
• Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Do not place any naked flame sources, such as lighted candles, on or near the apparatus.
• The battery is only intended for use with the power supply or charger provided with the speaker. Refer to charging instructions in the speaker owner’s guide. Do not continue charging the battery if it does not reach full charge within the 10 hours. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat defor­mation or leakage, properly dispose of the battery.
• Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-40°C).
• Keep batteries out of the reach of children and pets.
• If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical advice immediately.
Tab 3, 11
EnglishTab2 , 1 0
Page 3
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
• Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to tempera­tures in excess of 140°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy.
• If the battery is damaged and ignites, do not use water to extinguish flames. Instead, use a functioning fire extinguisher.
• Do not step on, throw, or drop batteries or the power supply or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it.
• Do not short-circuit batteries. Avoid storing them around metal objects such as keys, pocket change, paper clips, and jewelry.
• Do not dismantle, open, or shred the battery.
• The battery is intended to be used only with the Bose product and the power supply provided, or Bose power supply or charger designed for use with this product.
• This product is intended to be used only with the power supply provided, or Bose power supply or charger designed for use with this product.
• The cells in the batteries perform best when operating at normal room temperature, 70°F (20°C).
Tab 6, 14
Tab 8, 16Tab2, 7, 15
SAFETY INFORMATION
• Replace the speaker battery only with a genuine replacement battery from Bose or an authorized Bose dealer. Bose cannot warrant the safety and compatibility or assure the operability of batteries from other manufac­turers for use in operating this product. DO NOT attempt to use the speaker battery to power other electronics. Doing so may result in permanent damage to your speaker and/or personal injury.
• Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when listening to audio for extended periods.
This product contains magnets which can be harmful to pacemaker wearers.
Please dispose of a used or damaged battery promptly and properly, following all local
regulations. Do not incinerate.
To return a battery for recycling, contact Bose or your Bose dealer. In the United States only, call 1-800-905-2180 or visit the Bose regions, see the contact information included in the carton.
Conformity can be found at www.Bose.com/compliance.
®
website at www.Bose.com. For other
This product conforms to all applicable EU Directive requirements. The complete Declaration of
3
Page 4
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the
manufacturer.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience recep­tacles, and the point where they exit from the apparatus.
11. Unplug this apparatus during lightning storms or when
unused for long periods of time.
4
12. Refer all servicing to qualified service personnel.
13. To prevent risk of fire or electric shock, avoid
14. Do not let objects or liquids enter the product.
15. See product enclosure for safety-related markings.
16. Use proper power sources.
Tab 3, 11
Servicing is required when the apparatus has been damaged in any way: such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
overloading wall outlets, extension cords, or integral convenience receptacles.
EnglishTab2 , 1 0
Page 5
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Information about products that generate electrical noise
This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. This device must not be co-located or operating in conjunction with any other antennas or transmitters.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
U.S.A. only
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
Tab 6, 14
Tab 8, 16Tab2, 7, 15
SAFETY INFORMATION
the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes to this device not expressly approved by Bose Corporation may void the user’s authority to operate this device.
Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. This device must not be collocated or operating in conjunction with any other antennas or transmitters.
5
Page 6
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SAFETY INFORMATION
Tab 3, 11
EnglishTab2 , 1 0
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part
Lead
Mercury
Cadmium
Hexavalent
Name
(Pb)
(Hg)
PCBs
X0 0 0 0 0
Metal
X0 0 0 0 0
parts
Plastic
00 0 0 0 0
parts
Speakers
X0 0 0 0 0
Cables
X0 0 0 0 0
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 113 63-2006.
(Cd)
(CR(VI))
Polybrominated
Biphenyl (PBB)
Polybrominated
diphenylether
(PBDE)
6
Please complete and retain for your records
Serial number (on the back panel of the product): _______________________
Model number (on the back panel of the product): _______________________
Purchase date: ________________________________________ Dealer name: __________________________________________ Dealer phone: _________________________________________
Please keep your sales receipt with this owner’s guide.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Bose Corporation is under license.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
®
is a registered mark of the Wi-Fi Alliance.
Wi-Fi
Page 7
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 8
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 8
Opening the cover . . . . . . . . . . . . . . . . . 9
Placing the speaker . . . . . . . . . . . . . . . 10
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to AC power . . . . . . . . . . . 11
System status indicators . . . . . . . . . . . 13
Control buttons . . . . . . . . . . . . . . . . . . . 14
Pairing with Bluetooth® devices . . . . . . 14
Adding another source . . . . . . . . . . . . . 16
Operating on battery power . . . . . . . . . 18
MAINTENANCE AND CARE . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . .19
Replacing the battery . . . . . . . . . . . . . .22
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .23
Contacting customer service . . . . . . . . .23
Limited warranty information . . . . . . . . .23
Technical information . . . . . . . . . . . . . .23
7
Page 8
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
SoundLink® Bluetooth® Mobile speaker II
Power supply
INTRODUCTION
Tab 3, 11
EnglishTab2 , 1 0
Overview
Thank you for purchasing the SoundLink®
Bluetooth® Mobile speaker II. Now you can
enjoy your music wirelessly from your smartphone, tablet, laptop, or other
Bluetooth® enabled device anywhere you
choose.
Features
• Wireless Bluetooth link eliminates the need
to dock or physically connect your Bluetooth device.
• Rechargeable lithium-ion battery provides hours of Bose
®
performance.
• Integrated cover enables easy grab-and-go mobility.
Unpacking
Carefully unpack the SoundLink® Bluetooth®
Mobile speaker II and power supply. Save the carton and packing materials in case they are needed to ship the product.
8
If any part of the product appears to be
damaged, do not attempt to use it. Contact your authorized Bose dealer immediately or call Bose Customer Service. Refer to the contact list enclosed in the carton for contact information.
Page 9
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
(a) (b)
Tab 6, 14
Tab 8, 16Tab2, 7, 15
INTRODUCTION
Opening the cover
When opened, the cover forms a stand for the
speaker.
• No sound is heard from the speaker unless
the cover is opened.
• When you close the cover, magnets hold it
in place. When closed, the cover protects the speaker.
• If you close the cover while audio is playing,
the speaker turns itself off.
1. To open the cover, pull on the fabric tab imprinted with the Bose
®
logo.
2. Swing the cover down (a) and fold it under the unit (b). Magnets hold the folded sections together.
9
Page 10
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
INTRODUCTION
Tab 3, 11
EnglishTab2 , 1 0
Placing the speaker
When using your SoundLink® Bluetooth®
Mobile speaker II indoors, the tonal quality can vary depending on where the speaker is placed in a room. When moving the speaker around within a room or from room to room, keep the following guidelines in mind:
• The speaker is designed to sound best when placed on a shelf, counter, desk, or tabletop that is 24 to 48 inches high.
• For best bass response, the speaker should be placed near a wall; bass response decreases as the speaker is placed closer to the center of a room.
• When operating the speaker, always use the cover as a stand. Do not lay the speaker on its back. Sound is emitted from both the front and rear of the unit.
10
• The speaker should not be placed in small areas that are enclosed on all sides except the front, as this will adversely affect sound quality.
• Do not place the speaker on wet or dirty surfaces. Doing so could transfer dirt, sand, or moisture onto the speaker when the cover is closed.
If you are using your speaker outdoors, you
should expect the tonal quality to change as you move farther from the speaker.
Page 11
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
AC adapter
Power pack
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
Connecting to AC power
Before using your new SoundLink® Bluetooth®
Mobile speaker II the first time, you should connect it to AC (mains) power.
To connect to AC power:
1. Depending on your region of the world, do
one of the following to prepare your power pack for use:
A. Unfold the power supply prongs.
OR
B. Slide the AC adapter for your region
into the power supply.
11
Page 12
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
2. Plug the DC power cord on the power
supply into the DC connector on the SoundLink
12
®
Mobile speaker II.
3. Plug the power supply into a live AC
(mains) outlet.
• The speaker emits a tone to confirm the connection, and charging begins.
• Once connected to AC power, your SoundLink® Mobile speaker II is ready for use.
Page 13
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
System status indicators
The status indicators, located on the front of
the SoundLink® Mobile speaker II, illuminate to indicate when a source or feature is activated.
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
The speaker is playing the source connected to the AUX ( ) input.
®
The Bluetooth indicates the state of the speaker:
Slowly fades on-off once per second – Discoverable and ready to pair with a new
source is selected and
device.
Blinks on-off twice per second – Attempting to connect to a paired device.
Solid on – Connected to a paired device.
Blinks on-off once every 3 seconds – Disconnected and available to connect to any paired device.
For more information, see “Pairing with
Bluetooth
®
devices” on page 14.
Indicates the battery level or charging status. See “Operating on battery power” on page 18 for more information on reading the indicator.
Flashes to indicate when the sound is muted.
13
Page 14
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
Control buttons
The control buttons are located on the top of
the speaker.
• Press to turn the speaker on or off.
• Press and hold to check the battery level (see “Checking the battery” on page 18).
• Press to select the source connected to the
(AUX) input. See “Adding another
source” on page 16.
• Press to select the Bluetooth speaker attempts to connect to the last paired device. See “Pairing with Bluetooth devices.”
• Press and hold for 3 seconds to set the speaker to discoverable mode and allow pairing with another Bluetooth
• When a device is connected, press to disconnect the device. The speaker then waits for a paired device to connect.
• While the Bluetooth no device connects within 30 minutes, the speaker turns itself off.
14
®
source. The
®
device.
®
source is selected, if
• Mutes sound from the speaker.
• Plus (+) increases volume, minus (–) decreases volume. The front panel source indicator flashes once for each button press. The indicator flashes twice when maximum or minimum volume is reached.
Pairing with Bluetooth® devices
Pairing occurs when two Bluetooth devices
communicate with each other and establish a
®
connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the SoundLink® Mobile speaker II, you should not have to pair it again.
The SoundLink
with up to six Bluetooth devices. However, it can only connect to, and play audio from one device at a time.
®
Mobile speaker II can pair
Page 15
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
To begin pairing with a Bluetooth device
1. With the Bluetooth device and the
SoundLink®Mobile speaker II both turned on, press and hold the Bluetooth button on the speaker for three seconds to make the speaker discoverable.
The Bluetooth SoundLink
®
indicator on the
®
Mobile speaker II slowly fades on and off approximately once every second to show that the speaker is discoverable.
2. Set your Bluetooth device to “discover”
the SoundLink
®
Mobile speaker II, then
locate the Bluetooth device list.
3. From the Bluetooth device list, select the
device named “Bose SoundLink.”
4. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some devices may also ask you to accept the connection.
Yo ur Bluetooth device indicates when pairing
is complete. The SoundLink® Mobile speaker II indicates pairing is complete when the Bluetooth indicator stops fading on and off and remains steadily on.
Note: If Bluetooth connection appears to fail, or you
are unable to pair your device, press and hold Mute on the speaker for 10 seconds until the indicators briefly flash. Then press Power to turn the SoundLink speaker II on again.
To connect a device
To connect a previously paired device, press
the Bluetooth button on the SoundLink
®
Mobile speaker II. The Bluetooth indicator on the speaker flashes on and off approximately twice every second until the device connects. Then the indicator stops flashing and remains on when the speaker and device have successfully connected.
®
15
Page 16
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
To pair additional devices
With the Bluetooth device and the
SoundLink
®
Mobile speaker II both turned on,
press the Bluetooth button on the speaker for three seconds to make the speaker discoverable again. Then follow steps 2 - 4 on this page.
The SoundLink
®
Mobile speaker II memory can hold up to six paired devices. You can pair more than six devices, but the memory will never contain more than six. When the memory is full with six devices and an additional device is paired, the least recently used device is deleted from memory and replaced by the newly paired device.
16
Clearing memory
To clear the SoundLink
®
Mobile speaker II
memory of all devices, press and hold the
Bluetooth® button on the speaker (about 10
seconds) until you hear a tone.
The SoundLink
®
Mobile speaker II clears all
Bluetooth devices from its memory and then becomes discoverable.
Adding another source
You can use another audio device, such as
a portable digital music player, with your SoundLink® Mobile speaker II. This requires using an audio cable with a 3.5 mm plug on one end to connect with the AUX input on the SoundLink® Mobile speaker II system.
Page 17
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
OPERATION
To add a source:
1. Plug the cable from the audio device into
the AUX ( ) connector on the back of the SoundLink
®
Mobile speaker II.
2. Press the AUX button.
3. Adjust the volume on the connected
device to near maximum, then use the SoundLink
®
Mobile speaker II volume
buttons to adjust the level.
Note: If a connected device stops playing audio for
30 minutes, the speaker automatically turns off.
Note: The SERVICE connector on the rear of the
speaker is for Bose not play audio from any connected device.
®
software updates only and will
17
Page 18
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
Green: ............. 70% or more of full charge
Yellow: ............ 20% to 70% of full charge
Red: ................ 20% or less (charge needed)
Yellow: .......Battery charging
Green: .......Charging complete
OPERATION
Tab 3, 11
EnglishTab2 , 1 0
Operating on battery power
A fully charged battery provides approximately
three hours of use at maximum volume. The rate of battery discharge varies with the volume setting. You can extend the battery playback time by reducing the volume.
Checking the battery
The battery status indicator is normally off to
conserve battery power. To check the charge level, press and hold the power button and observe the battery indicator.
Battery protection mode
When the SoundLink
unplugged and unused for more than 14 days, it enters battery protection mode to preserve battery power. To reactivate the speaker, connect it to AC (mains) power. See the following section on “Charging the Battery."
18
®
Mobile speaker II is
Charging the battery
The battery status indicator on the SoundLink®
Mobile speaker II glows red when the battery needs charging. The battery can be charged whether the cover is opened or closed. You can use the speaker while charging the battery.
To charge the battery, connect the power supply to the speaker and plug it into a live AC (mains) outlet. The speaker emits a tone to confirm the power connection. Recom­mended charging time is 3 hours. The battery status indicator indicates charging status.
Note: Do not store your SoundLink
II for extended periods when the battery status indicator is red.
®
Mobile speaker
Page 19
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
MAINTENANCE AND CARE
Troubleshooting
Problem What to do
Speaker will not turn on (AC power)
Speaker will not turn on (battery power)
Paired Bluetooth device will not connect
Speaker indicates a connection, but is not playing music
• Make sure your system is connected to a working AC (mains) outlet.
• Make sure the protective cover is open.
• Battery may be in protection mode or discharged – connect to working AC (mains) outlet to restore the battery to operational mode.
• Make sure the protective cover is open.
®
• If your device requires a passkey, make sure the one you entered was correct.
• Turn the SoundLink
• Clear the speaker memory (see “Clearing memory” on page 16). Remove the SoundLink (For help, see the owner’s manual for the device). Then pair the device and the SoundLink® Mobile speaker II again.
• Turn off or disable Bluetooth on all other paired devices nearby (including Bose preferred devices) and reconnect the device you want to hear.
®
• Turn the SoundLink
• Make sure the transport controls of the audio device are set to playback audio.
• Make sure your SoundLink
• Make sure your Bluetooth
®
Mobile speaker II off and on again.
Mobile speaker II from the list of paired devices on your Bluetooth device
®
Mobile speaker II off and on again.
®
Mobile speaker II is not muted, and the volume is up.
®
enabled device is playing audio, and the volume is up.
Tab 6, 14
Tab 8, 16Tab2, 7, 15
®
19
Page 20
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
MAINTENANCE AND CARE
Tab 3, 11
EnglishTab2 , 1 0
Problem What to do
No audio from a
Bluetooth
®
device
•Move your Bluetooth device and/or SoundLink
devices that generate electromagnetic interference. Examples are cordless phones, microwave ovens, wireless network routers, or other Bluetooth devices.
• If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth
functionality.
• Turn the SoundLink
• Refer to the owner’s guide, help system, or technical support for your Bluetooth device to learn how it pairs with other Bluetooth devices.
• Make sure your SoundLink
®
Mobile speaker II off and back on.
®
Mobile speaker II is not muted, and the volume is up.
• Make sure your Bluetooth device is playing audio, and the volume is up.
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink
Cannot pair the speaker with my
Bluetooth
®
device
Mobile speaker II.
• Turn the SoundLink
• Make sure your SoundLink® Mobile speaker II is discoverable. Press and hold the Bluetooth button (three seconds) until the Bluetooth indicator slowly flashes.
• Make sure you select "SoundLink Wireless Mobile speaker II" in the pairing list on your device to finalize the connection (required by some devices).
®
Mobile speaker II off and back on.
• Make sure the Bluetooth capability on your device is turned on.
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink Mobile speaker II.
20
®
Mobile speaker II away from other
®
®
Page 21
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
Problem What to do
Cannot pair the speaker with my
Bluetooth
®
device –
cont.
• Reset the SoundLink
Bluetooth device is disconnected and the SoundLink Then press Power to turn the SoundLink
• Make sure your Bluetooth device supports the A2DP (stereo Bluetooth) profile.
®
Mobile speaker II: Press the mute button for 10 seconds. Your
• Make sure when connecting to a PC or Mac computer that you select the SoundLink
Wireless Mobile speaker II as the audio output device within the audio settings menu of the device. You may need to play an audio track to finalize the connection. (See the device manufacturer for detailed instructions).
• Check for updated software for your Bluetooth device, or check owners.Bose.com for
software updates to the SoundLink
Poor sound quality from the AUX source
Poor sound quality from a Bluetooth device
• Reduce the volume level on the AUX source.
• Make sure the 3.5 mm plug is fully inserted into the SoundLink
•Your Bluetooth device may be out of range – try moving it closer to the SoundLink
®
Mobile speaker II.
•Move your Bluetooth device and/or SoundLink
device that generates electromagnetic interference, such as another Bluetooth device, cordless phone, microwave oven, or wireless router.
• Reduce the number of applications running on your Bluetooth device. Running multiple
applications can reduce the amount of internal resources available to transmit audio. Closing non-essential applications may improve audio quality.
•Try turning off Wi-Fi
®
to improve audio quality.
®
Mobile speaker II back on.
®
Mobile speaker II.
®
Mobile speaker II away from any
®
Mobile speaker II turns off.
®
Mobile speaker II.
®
21
Page 22
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
MAINTENANCE AND CARE
Tab 3, 11
EnglishTab2 , 1 0
Problem What to do
Poor sound quality from a Bluetooth device – cont.
No audio from the AUX source
• Try unpairing your Bluetooth device from the SoundLink
®
re-pairing the two. This action can possibly clear issues that might have occurred during initial device pairing.
• Turn the SoundLink
• Reset the SoundLink Bluetooth device is disconnected and the SoundLink Then press Power to turn the SoundLink
• Check for updated software for your Bluetooth device, or check owners.Bose.com for software updates to the SoundLink
®
Mobile speaker II off and back on.
®
Mobile speaker II: Press the mute button for 10 seconds. Your
• Make sure your connected device is on and playing.
• Press the AUX button and check that the AUX source indicator is on.
• Make sure the 3.5 mm plug is fully inserted into the SoundLink
• Increase the volume level on the device.
• Increase the SoundLink
Replacing the battery
The battery should be replaced when:
• The battery status indicator is yellow when
®
Mobile speaker II volume.
For replacement batteries, contact the Bose
Visit http://global.Bose.com for Bose contact
manually checking the battery charge level following a consistent 10 hour charge cycle.
• The period of battery operation noticeably decreases.
22
®
Mobile speaker II and then
®
®
Mobile speaker II back on.
®
Mobile speaker II.
Mobile speaker II turns off.
®
Mobile speaker II.
organization in your country/region.
information in your country or region.
Page 23
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 6, 14
Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
Cleaning
To clean the exterior surface of your product,
you can wipe it using a soft, dry cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to
drop into any openings.
Contacting customer service
For questions about the SoundLink®
Bluetooth® Mobile speaker II, contact your
local Bose dealer. To contact Bose directly, see the contact list included with your SoundLink® Mobile speaker or visit http://owners.Bose.com.
Limited warranty information
You r So un dL in k® Bluetooth® Mobile speaker II is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton.
Please refer to the card for instructions on
how to obtain warranty service and register your product. Failure to register will not affect your limited warranty rights.
Technical information
Power supply rating
Input: 100 - 240V , 50/60Hz, 600mA
Output: 17 VDC, 1A Max
Input power rating
Input: 17 - 20 VDC, 1A Max
Dimensions
5.1"H x 9.6"W x 1.9"D (13.0 cm x 24.4 cm x 4.8 cm)
Weight
2.9 lb. (1.3 kg)
Temperature range for use
0° - 45°C (32° - 113°F)
23
Page 24
Loading...