Your 20 1® or 301® Series V Direct/Refl ecti ng® speakers recr eat e a natu ral ba lance of reflected
and direct sound energy for an open, spacious performance. They are designed by Bos e
bring you high-quality listening pleasure.
These speakers ar e si gnifi ca ntly di fferent fr om conven t ional speak er s, so b e su r e to r ea d thi s
owner’s guide. It will help you set up and use your speakers properly, for the greatest enjoy
ment.
Carefully unpack th e car ton a nd sa ve a ll pa ckin g mater ial s f or po ssib le fu ture use. Check the
carton contents (
If either speaker appears damaged, do not use them. Instead, repack both speakers in the
original carton and notify your authorized Bose dealer immediately.
Note: Now is a good time to record the speaker serial numbers below and on your warranty
card.
CAUTION: To avoid danger of suffocation, keep the plastic bags that wrap these speakers out
of the reach of children.
Figure 1).
®
to
-
201® series V speakers301® series V speakers
For your records
Serial numbers are located on the back of each speaker.
Serial number: ____________________and______________________________
Dealer name: _________________________________________________________
Dealer phone: ____________________Purchase date ____________________
We suggest you keep your sales slip and warranty card together with this owner’s
guide.
3
Page 4
Setting Up
Select the location s for your 201® or 301® speakers
Bose® 201 and 301 speakers are designed to fit horizontally on a stable and level table or
Figure 2).
shelf (
Place the left and right speakers (marked on the back of each one) on the left and right sides
of your room, a s you face the m. Exact ly wher e you put th em depe nds on t he size a nd sty le of
your room and where you think they sound best. Feel free to experiment to find a location
that is both convenient and provides the sound you prefer.
Note: Because the grilles on the front of each speaker protect the drivers inside, we recommend that you do not remove them.
CAUTION: 201 and 301 speakers are designed specifically for placement on a stationary
shelf, table, or stand. On smooth surfaces like marble, glass or highly polished wood, vibrations may cause the speakers to slide. So be sure to attach the self-adhesive rubber feet to
the bottom surface of each speaker for added stability and protection. The feet go in the cor
ners of the flat surface, 1” back from the center of the curved front panel. Do not use these
speakers in a moving vehicle. To mount the speakers on a wall, use only the Bose WB-3 wall
mounting bracket. Please follow the mounting instructions that come with these brackets.
Improperly mounted speakers may fall, causing injury and damage.
Here are some basic guidelines below:
• Leave at least 24 inches (60 cm) from the speakers to any TV screens or monitors.
• Keep the back of the speakers within 18 inches (45 cm) of the wall behind them.
-
Figure 2
Placement guidelines
18" (45 cm)
or more
12" (30 cm)
or more
CAUTION: For the most realistic sound image, make sure the left speaker is placed on the left
and the right speaker is on the right side of your room, as you face them.
LEFT
speaker
18" (45 cm)
or more
4-12'
(1-4 m)
RIGHT
speaker
4
Page 5
Choose the cord
Prepare the cord
Setting Up
It is important to use the proper gauge (thickness) of speaker cord.
Wire recommendations
Based on a maximum frequency response deviation of ± 0.5 dB
GaugeLength
18 (0.82 mm2)
16 (1.3 mm2)
14 (2.1 mm2)
Note: Before running the speaker cord through a wall or under a floor, check your local building code requirements and safety regulations. If necessary, contact an electrical installer for
this information.
Speaker cord cons ists of two insulated wires. The insulation around one wire is marked
(striped, collared, or ribbed).
At the ends of each cor d, strip approximately
Twist the bare end of each wire so loose strands will not touch across terminals. Be sure to
connect each wire to the proper terminal (positive to positive and negative to negative).
20 ft (6 m)
30 ft (9 m)
50 ft (15 m)
1
⁄
inch (12 mm) of insulation from both wires.
2
Note: It is sometimes difficult to distinguish wire markings. Inspect both wires carefully.
5
Page 6
Setting Up
+
—
+
—
+
—
Make the connections
Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure
3).
CAUTION: Before making any connections, turn off your receiver and unplug it from the AC
power (mains) outlet. Not doing so may result in damage to your system.
CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage.
1.Connect one speaker cord to your right speaker.
• Attach each marked wire (+) to the appropriate (+) terminal.
• Attach each plain wire (–) to the appropriate (–) terminal .
2.Connect the other end of the same cord to the RIGHT SPEAKER OUTPUT of your
receiver.
• Attach each marked wire (+) to the appropriate (+) terminal.
• Attach each plain wire (–) to the appropriate (–) terminal .
3.Connect the second cord to the left speaker and LEFT SPEAKER OUTPUT. Follow the
steps in 1 and 2 above.
Figure 3
How to make terminal connections
Black
Red
Test the speakers
Red
Black
301® series V201® series V
To make sure your speakers operate correctly:
1.T u rn on your re ceiver. Set the receiv er to MONO (monophonic) , if th at is an opt ion on y our
receiver.
2.Make sure that all special effects (such as surround sound) are turned off.
3.Set the balance control to normal (center position).
4.Play some deep bass passages of music through the speaker.
The sound should seem to come fr om a point betwee n the two speakers . The bass should be
full and natural. If it is not, one of the connections may be reversed, causing the speakers to
play out of phase (refer to “Make the connections” above).
To correct the problem, make su r e all th e wir es ar e conn ected p ositive to posit ive (+ to +) and
negative to negative (– to –). Then repeat steps 1 through 4 above to re-test the speakers.
6
Page 7
Enjoying sound in a variety of ways
Your 201® or 301® speakers are des igned to wo rk wi th a variet y of stereo receivers and amplifiers as either front or rear channel speakers. The open, spacious performance of these
speakers makes them an ideal choice for home theater, or for listening to CD’s, tapes, or
radio broadcasts (
Figure 4
301 and 201 series V
speaker sound path
Figure 4).
301® series V201® series V
Using and Maintaining Your Speakers
Cleaning the sp ea kers
Clean the surface of your speakers with a soft damp cloth. Do not use any sprays near the
system or allow liqui ds to spill int o any openings. Also, do no t use any solven ts, chemical s, or
cleaning solutions containing alcohol, ammonia, or abrasives.
The speaker grille pan els require no special care. You may vacuum them carefully to remove
dust.
7
Page 8
Reference
Troubleshooting
ProblemWhat to do
No sound• Make sure the receiver is plugged in and turned on.
• Check to be sure the AC power (mains) outlet is working.
• Disconnect any headphones plugged into the headphone jack.
• Make sure the receiver is not set to MUTE.
• Refer to the owner’s guide that came with your receiver.
• Check connections to both the speakers and the receiver. Refer to “Make the connections” on page 6. Correct any connection errors.
No sound from one
speaker
One speaker sounds distorted
Not enough bass or treble • Adjust the bass and treble controls on the receiver.
• Disconnect the working spe aker from the receiver.
• Switch the cord of the “faulty” speaker from its original receiver jacks to the other set of
jacks (the working speaker was originally attached to those jacks).
– If the speaker now works, the problem is in your receiver.
– If the speaker does not work, continue below.
• Remove the cord from the working speaker and co nnect it to the “faulty” speaker and
either set of receiver jacks.
– If the speaker now works, the problem was in the original speaker cord.
– If the speaker does not work, the problem is in the speaker.
• Follow the same procedure for the problem of no sound from one speaker, as outlined
above.
• Check the connections to make sure they are correctly in phase (+ to + and – to –). Refer
to
“Make the connections ” on page 6.
• Move the speakers closer to or fa rther fr om th e side wall s or other sou nd-r eflect ing har d
surfaces.
• Do not place the speakers exactly halfway between the floor and ceiling or any other
sound-reflecting hard surface.
Customer service
If the troubleshooting guidelines above do not solve your problem, contact your authorized
®
Bose
dealer to arrange for service. To obtain information or service directly from Bose, see
the list of telephone numbers in cluded wi th y our sp eake rs. Bos e Corp or ation will mak e every
effort to correct any problem within the terms of your warranty.
Warranty period
8
Bose 201® and 301® series V Direct/Reflec ting® speakers are cover ed by a limited transfer able
warranty. Details of the coverage are provided on the warranty card that came with your
speakers. Please fill out the information section on your card, detach, and mail to Bose.
Page 9
Technical i n formation
Features
Direct/Reflecting® speaker technology
Stereo Targeting® tweeters
Tuned port enclosure
Syncom® computer quality control
Driver complement
201®: One 6.5-inch (16.5 cm) woofer. One 2-inch (5 cm) tweete r.
301®: One 8-inch (20 cm) woofer. Two 2-inch (5 cm) high-sensitivity tweeters.
Compatibility/impedance
201: Compatible with amplifiers and receivers rated from 10 to 120 watts per channel.
Rated 4 - 8 ohms
301: Compatible with amplifiers and receivers rated from 10 to 150 watts per channel.
Rated 4 - 8 ohms
Enclosure
Polymer and vinyl veneer over wood construction with black o r light cherry finish.
Reference
Size/Weight
201: 8"H x 13
Each speaker, unpacked: 11 lb (5 kg).
Speaker pair in shipping carton: 25.2 lb (11.4 kg).
301: 9
Each speaker, unpacked: 12.5 lb (5.7 kg).
Speaker pair in shipping carton: 28.7 lb (13 kg).
Optional accessories
Bose® FS-01 speaker stands and WB-3 wall mounting brackets are designed for use with 201
and 301 Series V Dir ect/Reflecting speakers. For information, or to order accessories, con
tact your authorized Bose dealer. To contact Bose directly, see the list of telephone numbers
included with your speakers.
take great pride in designing each
estaccuracy musical performance possible in the price range
reproduce the musical sounds as closely as possible to those
of
our
products with the goal
YOU
of
providing the high-
of
that product. We strive to
of
the original performance.
And we strive to avoid flashy sounds such as those associated with accentuated bass
and/or treble frequencies. While those sounds may be initially attractive to the novice,
they are not real and are not enduring . In addition, we use only the highest quality parts
and the latest assembly and quality control techniques to ensure the reliability and long
life
of
our products.
on
our
Our reputation rests
steadfast pursuit
of
this policy in sound systems for the home,
the automobile, and businesses.
At
Bose®
we reinvest 100%
of
our earnings back into the company. This enables us to
support research that continually gives rise to new technologies for improving sound
reproduction.
When you purchase any product from Bose, we encourage you to compare it, as we do, to
competitive products for musical accuracy.
appreciation