Bosch Security Systems RF3402 Users manual
RF3402
Recessed Wireless Window or
Door Magnetic Contact
Installation Instructions
Parts List
Mounting Locations
Tools Needed
Compliance
UL
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.
Changes or modifi cations not expressly approved by Bosch Security Systems can void the user’s authority to operate the
equipment.
Specifi cations
-20 °C to +65°C (-4°F to +149°F)
For UL Listed installations, the temperature
range is 0 °C to +40°C (+32°F to +104°F)
www.boschsecuritysystems.com
Battery Life: 5 years
Frequency: 304.00 MHz
Compatible Receiver: RF3224
Humidity: 95° non-condensing
© 2004 Bosch Security Systems
F01U000844B
1
Installation
1
1
6
7
4
Surface and Flush Mount
2
3
4
Control Panel Programming
Use the number
on your RF3402 to
program the point
transmitter into the
control panel.
Note: Install the magnet assembly on the the moving part
2
of the door or window and the transmitter housing on the
fi xed part.
3
Flush Mount Only - Countersink
5
Flush Mount
5
Battery Installation
Recommended batteries:
Duracell DLCR2
Eveready EL1CR2
Sanyo CR2
Surface Mount
© 2004 Bosch Security Systems
F01U000844B
2
Loading...