Bosch WAE24272AU User Guide & Programme Table

Download

Page 1

1 2 3 4 5

Status

indicator

- - - -

- 1200* rpm Select the spin speed

(* depending on the model) or

- - -

(no final spin, laundry soaks in the

last rinsing water)

cold - 90

Temp. °C VSelecting the temperature

1 - 24h Start in Programme starts in ...

End of programme when ...

... the Spin status indicator flashes and End is displayed in the display panel.

Changing the programme, if ...

... you have selected the wrong programme by mistake: – Reselect the programme.

– Select $Start/Pause.

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Selectc2Rinse/Freshen up.

Washing machine door remains locked.

– Select Off.

– Select  Spin or >Drain.

– Select $Start/Pause

Correct installation according to the separate Installation instructions.

Checking the machine

– Never use a damaged machine. – Inform the after-sales service.

Connecting the mains plug

Make sure your hands are dry. Take hold of the plug only.

Turning the tap on

Compartment II: Detergent for the main wash, water softener,

bleach, stain remover

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load –> page 7.

Follow important instructions –> page 6.

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Measure accordingly:

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

Pour liquid detergent into the appropriate dispenser and place in the drum.

Your washing machine

Congratulations ä you have opted for a modern, high-quality

domestic appliance manufactured by Bosch. The washing machine is distinguished by its economical water- and energy consumption.

Each machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition.

Further information: www.bosch-home.com

Environmentally friendly waste disposal



All packaging must be disposed of in accordance with environmental guidelines. This appliance is certified in accordance with European Directive 2002/96/EEC on waste electrical and electronic equipment (WEEE). This directive provides the framework for the EU-wide collection and reuse of used appliances.

Intended use

Contents Page

ʋIntended use ....................................................................................... 1

ʋProgrammes .......................................................................................1

ʋSetting and adjusting the programme ...........................................3

ʋWashing ...........................................................................................3/4

ʋAfter washing ......................................................................................4

ʋIndividual settings ..............................................................................5

ʋImportant information ....................................................................... 6

ʋOverview of programmes ................................................................7

ʋSafety instructions .............................................................................8

ʋConsumption values .........................................................................8

ʋCare .....................................................................................................9

ʋInformation on the display panel .................................................... 9

ʋMaintenance .................................................................................... 10

ʋWhat to do if... .................................................................................. 11

Environmental protection/Conservation tips

– Always fill the washing machine with a maximum amount of

laundry for the relevant programme.

– Wash normally soiled laundry without a pre-wash.

– Instead of LFCottons 90°C, choose the programme

Cottons Eco 60 °C. Comparable cleaning result with

significantly lower energy consumption.

– Measure the detergent according to the manufacturer's

instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the spin

speed according to the instructions of the dryer manufacturer.

Preparation

Before washing for the first time

Wash once without any laundry –> page 9.

Setting** and adjusting programmes

Display panel/

options buttons

Programme selector

Start/

Pause

Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction.

Programmes

Detailed overview of programmes –> page 7. Temperature and spin speed can be selected individually, depending on the selected programme and programme progress.

LFCottons

hard-wearing fabrics

 Cottons Stains

 Cottons Eco

7Cottons Prewash

SCottons Easy-Iron

I Easy-Care

easy-care fabrics

I Easy-Care Intensive

7 Easy-Care Prewash

1 Mixed Load

different types of laundry

 Delicate/Silk delicate washable fabrics

ø/ Wool hand-/machine-washable wool

6 Express 15´ Short programme

2 Rinse/ Freshen up with subsequent spin cycle; for hand- washed

items, starching or freshen up items

–> page 6.

 Spin washing washed by hand

>Drain the rinsing water if

- - - -

occurs

Additional function and options buttons –> Individual settings, page 5.

Select $Start/Pause

Washing

Removing the washing

Open the washing machine door and remove the washing. If

- - - -

(without final spin) is active: Turn the programme

selector to >Drain or select the spin speed.

Select Start/Pause $.

– Remove any foreign objects - risk of rusting. – Leave the washing machine door and detergent

drawer open so that any residual water can evaporate.

Turning the tap off

Switching off

Turn the programme selector to Off.

Washing

Detergent drawer with

compartments I, II, ~

Washing machine door

Compartment ~: Fabric softener, starch

Compartment I: Detergent for pre-wash

ʋfor domestic use only,

ʋfor machine-washable fabrics and hand-washable wool

in detergent solution,

ʋto be operated with cold drinking water and commer-

cially available detergents and care products which are suitable for use in washing machines.

ʋwhen determining the dosage of all washing powders,

additives and cleaning agents, you must follow the manufacturer's instructions.

– Do not leave children unattended near the

washing machine.

– The washing machine is not to be used by

children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Dilute thick fabric softener and fabric conditioner with water. This prevents blockages.

Individual settings

Options buttons

The spin speed and temperature can be changed before and during the selected programme runs. The effects depend on the programme progress.

rpm  (Spin speed in rpm/no final spin)

You can change the displayed spin speed. The maximum selectable spin speed depends on the model and on which programme is currently selected.

Temp. in °CV(Temperature in °C)

You can change the displayed washing temperature. The maximum washing temperature that can be selected depends on the programme that has been set.

Start in 

The respective programme duration is displayed by selecting the programme. The programme start can be delayed before the programme begins. The start in- time can be set

in hour- steps up to a maximum of 24 hours. Press the  button repeatedly until the required

number of hours is displayed (h = hour). Select Start/Pause $. The start in-time begins

counting down as soon as the programme starts. This indicated by the flashing indicator

lights Start/Pause $, Wash and by the flashing apostrophe ‘ between the number and h.

Additional function –> and overview of programmes, see page 7

2Rinse Plus Additional rinse cycle. For areas with very soft water or for further

enhancing the spin result.

$Start/Pause

For starting or interrupting the programme.

Important information

Protecting the laundry and the machine

– Empty pockets. – Look out for metal items (paperclips, etc.). – Wash delicates in a laundry bag (tights, curtains, underwired bras). – Fasten zips, do up any buttons. – Brush sand out of pockets and collars. – Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light Do not pre-wash. If required,

Pre-treat any stains as necessary. Choose programme  Cottons

Stains.

heavy Do not load as much laundry. Choose a programme with cPrewash.

Soaking Load laundry of the same colour

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's

instructions. Turn the programme selector to LF

Cottons 30 °C and select se $Start/

Pause. After approx. 10 minutes, press $Start/Pause. to pause the programme. Once the

required soaking time has elapsed, select $Start/Pause. again to continue the programme,

or select a different programme.

Starching Laundry must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse

first if necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions! Do not use the washing machine for bleaching clothes!

Freshen up Use programme 2Rinse/Freshen up

For items, that have been tucked away or stored for a period of time, to remove creases caused by folding and storage and to eliminate odours. Use fabric conditioner for “fresh? smell.

Add.

func-

tion

Drum

Control panel

Service flap

Page 2

Overview of programmes –> Refer to the table of consumption values on page 8 and notes on page 6.

Programmes °C max.

Type of laundry

Additional functions; information

LFCottons cold - 60 °C

6.5 kg

Hard-wearing fabrics, heat-resistant fab-

rics made of cotton or linen

Rinse Plus 2

[ Cottons Stains cold - 90 °C

 Cottons Eco cold - 60 °C

7Cottons Prewash, cold - 90 °C

SCottons Easy-Iron cold - 60 °C

Easy-Care I

cold - 60 °C

3 kg

Easy-care fabrics made of cotton, linen,

synthetic fibres or blended fabrics

Rinse Plus 2

Easy-Care Intensive IEasy-Care Prewash

Mixed Load1

cold - 40 °C

Fabrics made of cotton or easy-care fab-

rics

Rinse Plus 2;

different types of laundry can be washed together

Delicate/Silk cold - 40 °C

2 kg

For delicate, washable fabrics, e.g. made

of silk, satin, synthetic fibres or blended

fabrics (e.g. curtains)

Rinse Plus 2;

No spin between rinse cycles

Wool øøø/ccold - 40 °C

Handä or machine-washable fabrics made

of wool or containing wool

Particularly gentle wash programme to prevent shrink-

age of laundry. Longer programme breaks (fabrics rest

in the detergent solution)

Express 15´ 6cold - 40 °C

Easy-care fabrics made of cotton, linen,

synthetic fibres or blended fabrics

Short programme, approx. 15 minutes,

suitable for refreshing

Additional programmes 2 Rinse/ Freshen up, cSpin , >Drain

Programmes without  Pre-wash - add detergent to compartment II, programmes with  Prewash - distribute the detergent between compartments I and II.

Robert Bosch Hausgeräte GmbH

Carl-Wery-Str. 34

81739 München / Deutschland

WAE24272AU

WAE20262AU

9000 583 015

0810

Safety instructions

– Read the instruction manual and installation instructions and all other information enclosed

with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull the cable to disconnect the mains plug.

– Never insert/disconnect the mains plug with damp hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug. – Sever the mains cable and discard along with the plug. – Destroy the lock on the washing machine door. This will prevent

children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of

children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing

solvents, e.g. stain remover/cleaning solvent may cause an explosion after being loaded into the washing machine. Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when draining hot detergent solution. – Do not climb onto the washing machine. – Do not lean on the open washing machine door. – Do not reach into the drum if it is still rotating. – Be careful when opening the detergent drawer while the machine

is in operation.

Consumption values

Programme Load

Electricity consumption

Water**

Programme duration

 Cottons Stains 40 °C 6.5 kg 0,65 kWh 56 l 2:51 h

 Cottons Stains 60 °C

6.5 kg 1,30 kWh 56 l 3:09 h

 Cottons Eco 60 °C *

6.5 kg 1,19 kWh 47 l 2:35 h

 Cottons Stains 90 °C 6.5 kg 2,00 kWh 66 l 2:31 h

I Easy-Care 40 °C

3 kg 0.55 kWh 48 l 0:59 h

1Mixed Load 30 °C

3 kg 0.35 kWh 48 l 0:52 h

Delicate/Silk 30 °C 2 kg 0.28 kWh 48 l 0:44 h

/ccWool 30 °C

2 kg 0.20 kWh 32 l 0:53 h

* Programme setting with maximum spin speed for testing according to or in accordance with AS/NZS 2040.2

and AS/NZS 6400.

** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient

temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

Care

Before washing for the first time

Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II: – approx. 1 litre water – detergent (dosage according to the manufacturer's instructions for light soiling and the

appropriate degree of water hardness)

Set the programme selector to Easy-Care I 60 °C and select $Start/Pause. At the end of

the programme, turn the programme selector to Off.

Machine housing, control panel

– Remove detergent residue immediately. – Wipe away with a soft, damp cloth. – Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1. Pull out, press insert down, remove drawer completely.

2. Open the cover.

3. Clean the detergent dispenser tray and insert with water and a brush

and dry it.

4. Attach the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

Drum

Leave the washing machine door open so that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine

Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the correct dosage of detergent is used.

Information on the display panel depending on model

E2 Motor fault. Call customer service.

E3 Close the washing machine door properly; laundry may be caught.

E5 Open the tap completely, supply hose kinked or trapped;

Clean the filter –> page 10, Water pressure too low.

E6 Detergent solution pump blocked; Clean the detergent solution pump –> page 10.

Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon –> page 10.

E8 Turn off the tap and call customer service.

– Risk of electric shock.

Disconnect the mains plug.

– Risk of explosion. No solvents.

Maintenance

Detergent solution pump

Turn the programme selector to Off and disconnect the mains plug.

1. Open and remove the service flap.

2. For models with a drainage hose: Remove the drainage hose from the

retainer and pull it from the housing. Remove the container. Remove the sealing cap, allow the detergent solution to flow out. Replace the sealing cap and place the drainage hose in the retainer.

2* For models without a drainage hose: Carefully unscrew the pump cover

until the detergent solution begins to flow out. When the service flap is half full, close the pump cover and empty the service flap. Repeat the above steps until all the detergent solution has completely drained out.

3. Carefully unscrew the pump cover (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in

the detergent solution pump must rotate).

5. Replace the pump cover and screw it tightly.

6. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment II and start the >Drain programme.

Drainage hose at the siphon

Turn the programme selector to

Off

and disconnect the mains plug.

1. Loosen the hose clamp, carefully remove the drainage hose (residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose

clamp.

Filter in the water supply

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except  Spin/>Drain).

3. Select $Start/Pause. Let the programme run for approximately 40

seconds.

4. Turn the programme selector to Off. Disconnect the mains plug.

5. Disconnect the hose from the tap.

6. Clean the filter using a small brush.

7. Depending on model, remove hose from rear of the

appliance and clean filter.

8. Connect the hose and check for leaks.

– Risk of scalding. Allow the

detergent solution to cool down.

– Turn off the tap.

What to do if ...

Water is leaking out. – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

No water supply. Detergent not dispensed.

– Is $Start/Pause not selected?

– Tap not turned on? – Filter blocked? Clean the filter –> page 10. – Supply hose kinked or trapped?

Washing machine door cannot be opened.

– Safety function active. Wait approx. 2 minutes. – - - - - (without final spin) selected? –> page 4.

Programme does not start.

– $Start/Pause or Start in selected?

– Washing machine door closed?

Detergent solution is not drained.

– - - - - (without final spin) selected? –> page 4. – Clean the detergent solution pump –> page 10. – Clean the waste pipe and/or drainage hose.

Water not visible in the drum.

– Not a fault - water below the visible area.

Unsatisfactory spin result. Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has cancelled

the spin cycle because of uneven distribution of the laundry.

Distribute small and large items of laundry evenly inside the drum.

– Speed selected too low? –> page 5.

The programme duration changes during the wash cycle.

– Not a fault – the programme sequence is optimised for the

particular wash process. This may result in changes to the programme duration in the display field.

Spin cycle performed several times.

– Not a fault - unbalanced load detection system adjusts the

imbalance.

Residual water in the compartment for care products.

– Not a fault - the action of the care product is not affected. – Clean the insert if necessary –> page 9.

Odour formation in the washing machine.

– Run programme  Cottons Stains 90 °C without laundry. Use

standard detergent.

Foam may be coming out of the detergent drawer.

– Too much detergent used? Mix 1 tablespoon of fabric softener

with ½ litre of water and pour into dispenser II (not for outdoor

and down-filled textiles!).

– Reduce the detergent dosage for the next wash cycle.

Intense noise formation, vibrations and “wandering” during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet –> Installation instructions.

– Transportation safety devices removed?

Remove the transportation safety devices –> Installation instructions.

Noises during spin and drain cycles.

– Clean detergent-solution pump –> page 10.

Display panel/indicator lamps do not function during operation.

– Power cut? – Fuses triggered? Reset/change the fuses. – If the fault occurs repeatedly, call the after-sales service.

Programme sequence longer than usual.

– Not a fault - unbalanced load detection system adjusts

imbalance by repeatedly distributing the laundry.

– Not a fault - foam detection system active - adds an additional

rinse cycle.

Detergent residues on the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble

residues.

– Select 2Rinse/Freshen up or brush the laundry after washing.

If you cannot correct a fault yourself (switching on/off) or a repair is required: – Turn the programme selector to Off and remove the mains plug from the socket. – Turn off the water supply and call the after-sales service –> Installation instructions.

Instruction manual

Washing machine

Observe the safety instructions on page 8.

Read these instructions and the separate installation instructions before operating the washing machine.

Page 3

1 2

Status

indicator

- - - -

- 1200* rpm Select the spin speed

(* depending on the model) or

(no final spin, laundry soaks in the

last rinsing water)

cold - 90

Temp. °C VSelecting the temperature

1 - 24h Start in Programme starts in ...

Correct installation according to the separate Installation instructions.

Checking the machine

– Never use a damaged machine. – Inform the after-sales service.

Connecting the mains plug

Make sure your hands are dry. Take hold of the plug only.

Turning the tap on

Compartment II: Detergent for the main wash, water softener,

bleach, stain remover

Pour liquid detergent into the appropriate dispenser

Your washing machine

Congratulations ä you have opted for a modern, high-quality

domestic appliance manufactured by Bosch. The washing machine is distinguished by its economical water- and energy consumption.

Each machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition.

Further information: www.bosch-home.com

Environmentally friendly waste disposal



Intended use

Contents Page

ʋIntended use .......................................................................................1

ʋProgrammes .......................................................................................1

ʋSetting and adjusting the programme ........................................... 3

ʋWashing ........................................................................................... 3/4

ʋAfter washing ......................................................................................4

ʋIndividual settings ..............................................................................5

ʋImportant information ....................................................................... 6

ʋOverview of programmes ................................................................7

ʋSafety instructions ............................................................................. 8

ʋConsumption values .........................................................................8

ʋCare .....................................................................................................9

ʋInformation on the display panel .................................................... 9

ʋMaintenance .................................................................................... 10

ʋWhat to do if... .................................................................................. 11

Environmental protection/Conservation tips

– Always fill the washing machine with a maximum amount of

laundry for the relevant programme.

– Wash normally soiled laundry without a pre-wash.

– Instead of LFCottons 90°C, choose the programme

Cottons Eco 60 °C. Comparable cleaning result with

significantly lower energy consumption.

– Measure the detergent according to the manufacturer's

instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the spin

speed according to the instructions of the dryer manufacturer.

Preparation

Display panel/

options buttons

Programme selector

Start/

Pause

Programmes

Detailed overview of programmes –> page 7. Temperature and spin speed can be selected individually, depending on the selected programme and programme progress.

LFCottons

hard-wearing fabrics

 Cottons Stains

 Cottons Eco

7Cottons Prewash

SCottons Easy-Iron

I Easy-Care

easy-care fabrics

I Easy-Care Intensive

7 Easy-Care Prewash

1 Mixed Load

different types of laundry

 Delicate/Silk delicate washable fabrics

ø/ Wool hand-/machine-washable wool

6 Express 15´ Short programme

2 Rinse/ Freshen up with subsequent spin cycle; for hand- washed

items, starching or freshen up items

–> page 6.

 Spin washing washed by hand

>Drain the rinsing water if

- - - -

occurs

Compartment ~: Fabric softener, starch

Compartment I: Detergent for pre-wash

ʋfor domestic use only,

ʋfor machine-washable fabrics and hand-washable wool

in detergent solution,

ʋto be operated with cold drinking water and commer-

cially available detergents and care products which are suitable for use in washing machines.

ʋwhen determining the dosage of all washing powders,

additives and cleaning agents, you must follow the manufacturer's instructions.

– Do not leave children unattended near the

washing machine.

– The washing machine is not to be used by

children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Add.

func-

tion

Page 4

3 4

- - -

End of programme when ...

... the Spin status indicator flashes and End is displayed in the display panel.

Changing the programme, if ...

... you have selected the wrong programme by mistake: – Reselect the programme.

– Select $Start/Pause.

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Selectc2Rinse/Freshen up.

Washing machine door remains locked.

– Select Off.

– Select  Spin or >Drain.

– Select $Start/Pause

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load –> page 7.

Follow important instructions –> page 6.

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Measure accordingly:

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

Before washing for the first time

Wash once without any laundry –> page 9.

Setting** and adjusting programmes

Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction.

Additional function and options buttons –> Individual settings, page 5.

Select $Start/Pause

Washing

Removing the washing

Open the washing machine door and remove the washing. If

- - - -

(without final spin) is active: Turn the programme

selector to >Drain or select the spin speed.

Select Start/Pause $.

– Remove any foreign objects - risk of rusting. – Leave the washing machine door and detergent

drawer open so that any residual water can evaporate.

Turning the tap off

Switching off

Turn the programme selector to Off.

Washing

Detergent drawer with

compartments I, II, ~

Washing machine door

Dilute thick fabric softener and fabric conditioner with water. This prevents blockages.

Drum

Control panel

Service flap

Page 5

Individual settings

Options buttons

The spin speed and temperature can be changed before and during the selected programme runs. The effects depend on the programme progress.

rpm  (Spin speed in rpm/no final spin)

You can change the displayed spin speed. The maximum selectable spin speed depends on the model and on which programme is currently selected.

Temp. in °CV(Temperature in °C)

You can change the displayed washing temperature. The maximum washing temperature that can be selected depends on the programme that has been set.

Start in 

The respective programme duration is displayed by selecting the programme. The programme start can be delayed before the programme begins. The start in- time can be set

in hour- steps up to a maximum of 24 hours. Press the  button repeatedly until the required

number of hours is displayed (h = hour). Select Start/Pause $. The start in-time begins

counting down as soon as the programme starts. This indicated by the flashing indicator

lights Start/Pause $, Wash and by the flashing apostrophe ‘ between the number and h.

Additional function –> and overview of programmes, see page 7

2Rinse Plus Additional rinse cycle. For areas with very soft water or for further

enhancing the spin result.

$Start/Pause

For starting or interrupting the programme.

Important information

Protecting the laundry and the machine

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light Do not pre-wash. If required,

Pre-treat any stains as necessary. Choose programme  Cottons

Stains.

heavy Do not load as much laundry. Choose a programme with cPrewash.

Soaking Load laundry of the same colour

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's

instructions. Turn the programme selector to LF

Cottons 30 °C and select se $Start/

Pause. After approx. 10 minutes, press $Start/Pause. to pause the programme. Once the

required soaking time has elapsed, select $Start/Pause. again to continue the programme,

or select a different programme.

Starching Laundry must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse

first if necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions! Do not use the washing machine for bleaching clothes!

Freshen up Use programme 2Rinse/Freshen up

For items, that have been tucked away or stored for a period of time, to remove creases caused by folding and storage and to eliminate odours. Use fabric conditioner for “fresh? smell.

Page 6

Overview of programmes –> Refer to the table of consumption values on page 8 and notes on page 6.

Programmes °C max.

Type of laundry

Additional functions; information

LFCottons cold - 60 °C

6.5 kg

Hard-wearing fabrics, heat-resistant fab-

rics made of cotton or linen

Rinse Plus 2

[ Cottons Stains cold - 90 °C

 Cottons Eco cold - 60 °C

7Cottons Prewash, cold - 90 °C

SCottons Easy-Iron cold - 60 °C

Easy-Care I

cold - 60 °C

3 kg

Easy-care fabrics made of cotton, linen,

synthetic fibres or blended fabrics

Rinse Plus 2

Easy-Care Intensive IEasy-Care Prewash

Mixed Load1

cold - 40 °C

Fabrics made of cotton or easy-care fab-

rics

Rinse Plus 2;

different types of laundry can be washed together

Delicate/Silk cold - 40 °C

2 kg

For delicate, washable fabrics, e.g. made

of silk, satin, synthetic fibres or blended

fabrics (e.g. curtains)

Rinse Plus 2;

No spin between rinse cycles

Wool øøø/ccold - 40 °C

Handä or machine-washable fabrics made

of wool or containing wool

Particularly gentle wash programme to prevent shrink-

age of laundry. Longer programme breaks (fabrics rest

in the detergent solution)

Express 15´ 6cold - 40 °C

Easy-care fabrics made of cotton, linen,

synthetic fibres or blended fabrics

Short programme, approx. 15 minutes,

suitable for refreshing

Additional programmes 2 Rinse/ Freshen up, cSpin , >Drain

Programmes without  Pre-wash - add detergent to compartment II, programmes with  Prewash - distribute the detergent between compartments I and II.

Robert Bosch Hausgeräte GmbH

Carl-Wery-Str. 34

81739 München / Deutschland

WAE24272AU

WAE20262AU

9000 583 015

0810

Safety instructions

– Read the instruction manual and installation instructions and all other information enclosed

with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull the cable to disconnect the mains plug.

– Never insert/disconnect the mains plug with damp hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug. – Sever the mains cable and discard along with the plug. – Destroy the lock on the washing machine door. This will prevent

children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of

children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing

solvents, e.g. stain remover/cleaning solvent may cause an explosion after being loaded into the washing machine. Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

is in operation.

Consumption values

Programme Load

Electricity consumption**

Water**

Programme duration**

 Cottons Stains 40 °C 6.5 kg 0,65 kWh 56 l 2:51 h

 Cottons Stains 60 °C

6.5 kg 1,30 kWh 56 l 3:09 h

 Cottons Eco 60 °C *

6.5 kg 1,19 kWh 47 l 2:35 h

 Cottons Stains 90 °C 6.5 kg 2,00 kWh 66 l 2:31 h

I Easy-Care 40 °C

3 kg 0.55 kWh 48 l 0:59 h

1Mixed Load 30 °C

3 kg 0.35 kWh 48 l 0:52 h

Delicate/Silk 30 °C 2 kg 0.28 kWh 48 l 0:44 h

/ccWool 30 °C

2 kg 0.20 kWh 32 l 0:53 h

* Programme setting with maximum spin speed for testing according to or in accordance with AS/NZS 2040.2

and AS/NZS 6400.

** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient

temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

I$

Page 7

Care

Before washing for the first time

appropriate degree of water hardness)

Set the programme selector to Easy-Care I 60 °C and select $Start/Pause. At the end of

the programme, turn the programme selector to Off.

Machine housing, control panel

– Remove detergent residue immediately. – Wipe away with a soft, damp cloth. – Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1. Pull out, press insert down, remove drawer completely.

2. Open the cover.

3. Clean the detergent dispenser tray and insert with water and a brush

and dry it.

4. Attach the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

Drum

Leave the washing machine door open so that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine

Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the correct dosage of detergent is used.

Information on the display panel depending on model

E2 Motor fault. Call customer service.

E3 Close the washing machine door properly; laundry may be caught.

E5 Open the tap completely, supply hose kinked or trapped;

Clean the filter –> page 10, Water pressure too low.

E6 Detergent solution pump blocked; Clean the detergent solution pump –> page 10.

Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon –> page 10.

E8 Turn off the tap and call customer service.

– Risk of electric shock.

Disconnect the mains plug.

– Risk of explosion. No solvents.

Maintenance

Detergent solution pump

Turn the programme selector to Off and disconnect the mains plug.

1. Open and remove the service flap.

2. For models with a drainage hose: Remove the drainage hose from the

retainer and pull it from the housing. Remove the container. Remove the sealing cap, allow the detergent solution to flow out. Replace the sealing cap and place the drainage hose in the retainer.

2* For models without a drainage hose: Carefully unscrew the pump cover

3. Carefully unscrew the pump cover (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in

the detergent solution pump must rotate).

5. Replace the pump cover and screw it tightly.

6. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment II and start the >Drain programme.

Drainage hose at the siphon

Turn the programme selector to

Off

and disconnect the mains plug.

1. Loosen the hose clamp, carefully remove the drainage hose (residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose

clamp.

Filter in the water supply

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except  Spin/>Drain).

3. Select $Start/Pause. Let the programme run for approximately 40

seconds.

4. Turn the programme selector to Off. Disconnect the mains plug.

5. Disconnect the hose from the tap.

6. Clean the filter using a small brush.

7. Depending on model, remove hose from rear of the

appliance and clean filter.

8. Connect the hose and check for leaks.

– Risk of scalding. Allow the

detergent solution to cool down.

– Turn off the tap.

$



Page 8

What to do if ...

Water is leaking out. – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

No water supply. Detergent not dispensed.

– Is $Start/Pause not selected?

– Tap not turned on? – Filter blocked? Clean the filter –> page 10. – Supply hose kinked or trapped?

Washing machine door cannot be opened.

– Safety function active. Wait approx. 2 minutes. – - - - - (without final spin) selected? –> page 4.

Programme does not start.

– $Start/Pause or Start in selected?

– Washing machine door closed?

Detergent solution is not drained.

– - - - - (without final spin) selected? –> page 4. – Clean the detergent solution pump –> page 10. – Clean the waste pipe and/or drainage hose.

Water not visible in the drum.

– Not a fault - water below the visible area.

Unsatisfactory spin result. Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has cancelled

the spin cycle because of uneven distribution of the laundry.

Distribute small and large items of laundry evenly inside the drum.

– Speed selected too low? –> page 5.

The programme duration changes during the wash cycle.

– Not a fault – the programme sequence is optimised for the

particular wash process. This may result in changes to the programme duration in the display field.

Spin cycle performed several times.

– Not a fault - unbalanced load detection system adjusts the

imbalance.

Residual water in the compartment for care products.

– Not a fault - the action of the care product is not affected. – Clean the insert if necessary –> page 9.

Odour formation in the washing machine.

– Run programme  Cottons Stains 90 °C without laundry. Use

standard detergent.

Foam may be coming out of the detergent drawer.

– Too much detergent used? Mix 1 tablespoon of fabric softener

with ½ litre of water and pour into dispenser II (not for outdoor

and down-filled textiles!).

– Reduce the detergent dosage for the next wash cycle.

Intense noise formation, vibrations and “wandering” during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet –> Installation instructions.

– Transportation safety devices removed?

Remove the transportation safety devices –> Installation instructions.

Noises during spin and drain cycles.

– Clean detergent-solution pump –> page 10.

Display panel/indicator lamps do not function during operation.

– Power cut? – Fuses triggered? Reset/change the fuses. – If the fault occurs repeatedly, call the after-sales service.

Programme sequence longer than usual.

– Not a fault - unbalanced load detection system adjusts

imbalance by repeatedly distributing the laundry.

– Not a fault - foam detection system active - adds an additional

rinse cycle.

Detergent residues on the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble

residues.

– Select 2Rinse/Freshen up or brush the laundry after washing.

Instruction manual

Washing machine

Observe the safety instructions on page 8.

Read these instructions and the separate installation instructions before operating the washing machine.