CCTV AutoDome 100 Series Fixed Camera System
AutoDome 100 Series Fixed Camera System
X 540TVL fixed dome series
X Fully interchangeable CPUs, cameras, housings,
communications, and mounts
X Color and day/night camera options
X Available with 2.7–13.5 mm or 5–50 mm lens
X All versions allow for remote configuration and update
X Optional hybrid operation provides simultaneous
analog (coax) and IP (MPEG-4) connectivity
X UTP transmission standard on all analog models
X Three-year warranty
Introduction
Bosch’s AutoDome modular camera system is a
re vol utiona ry n ew co ncept in d ome cam eras. More than just
a series of cameras, it’s a dome platform built around a
system of intelligent, interchangeable modules that allow
you to update camera functionality quickly and costeffectively. Using common components lets you install a
basic camera system today and migrate to a more advanced
version tomorrow – without having to replace the entire
dome, thus protecting your initial investment.
Interchangeable modules
The entire AutoDome system is based on five
interchangeable modules: the CPU, camera, housing,
communications, and power supply. Simply swap one of
AutoDome’s interchangeable modules and quickly upgrade
from analog to IP, color to day/night, or add motion tracking
and image stabilization. Never before have you had the
ability to adapt a security system to your changing needs
this quickly or inexpensively.
By using the same housing components, all installations
have a consistent look, and observers have no idea which
type of camera (if any) is watching over them. This unique,
modular design also gives you the flexibility to move
cameras between different housings when special coverage
is needed, or as site plan requirements change. For
example, a fixed color camera over a specific area could
easily be “hot-swapped”to a day/night camera without
removing the power. Migrating from a fixed dome to a PTZ
dome with advanced features such as AutoTrack II
intelligent tracking can be done quickly and easily, without
requiring dome removal or rewiring. AutoDome’s Ethernet
communications module allows you to add IP functionality
while maintaining connectivity to existing analog inputs and
outputs.
100 Series highlights
The AutoDome 100 Series combines the same high-quality
housings used by AutoDome PTZ cameras with the awardwinning imaging technology of Dinion high-resolution color
or day/night fixed cameras and varifocal lenses.
The AutoDome 100 Series supports a variety of standard
and optional video and data transmission methods,
including Bilinx (over coax and UTP), fiber, and even TCP/IP
over Ethernet. Remote control, configuration, and firmware
updates can also be performed over these cables, offering
you unparalleled control of your cameras.
www.boschsecurity.com
2 | AutoDome 100 Series Fixed Camera System
The optional IP Communications Module has hybrid
functionality to protect your current analog technology
investment while providing a clear and stable migration
path to fully digital, IP-based solutions. This allows you to
move to IP video at your own pace – all at once or one
camera at a time. And since all AutoDome modules are
completely interchangeable, there is no need to replace
expensive components (e.g., cameras) or labor-intensive
components (e.g., mounts and housings).
Functions
The following are some of the features that make the
AutoDome 100 Series the most flexible fixed dome camera
systems in the security industry.
High-performance camera features
AutoDome 100 Series cameras have a 1/3-inch color CCD
with Bosch’s unique 15-bit Dinion digital imaging
technology to deliver a 32-fold sensitivity improvement and
a full 540 horizontal lines of resolution. In addition,
AutoDome 100 Series cameras incorporate a number of
features not found in other fixed dome cameras.
These include:
• XF-Dynamic - Extends the camera’s dynamic range to
deliver sharper, more detailed images and outstanding
color reproduction accuracy.
• NightSense – Automatically activated under low-light
conditions to extend the 100 Series’ exceptional
sensitivity by a factor of three during monochrome
operation.
• SensUp – Increases integration time by a factor of 10 to
dramatically enhance sensitivity.
• Back Light Compensation (BLC) – A fully programmable
backlight compensation (BLC) area of interest and
variable BLC level let 100 Series day/night cameras
overcome even the most challenging entrance, vestibule,
and lobby applications.
• Auto Black – Enhances contrast by compensating for
reduced contrast due to fog, mist, or glare.
• Default Shutter – Automatically adjusts to the lens
opening at fast shutter speeds, eliminating motion blur
and providing remarkably clear and detailed images of
fast-moving objects.
AutoDome 100 Series day/night versions automatically
switch from color to monochrome by removing a
mechanically switching IR filter in low-light conditions. This
boosts the infrared illumination sensitivity while
maintaining superior image quality.
Optional hybrid analog/IP operation
Optional hybrid connectivity allows the AutoDome to
simultaneously stream IP video across a local or wide area
network, and CVBS video via coaxial cabling to support
existing analog equipment. Network video streams are sent
over IP networks and can be viewed with the Bosch DiBos
Digital Video Recorder, or on a PC running VIDOS video
management software. Alternatively, a Bosch IP video
decoder can be used to display the video on an analog CVBS
or VGA monitor. For maximum accessibility, video can be
viewed using a Web browser. The BNC connection provides
direct input to a conventional analog matrix switcher or
DVR, further enhancing AutoDome’s viewing and recording
flexibility.
MPEG-4 encoding
AutoDome’s IP Communications Module uses the latest
MPEG-4 compression technology to provide DVD-quality
4CIF video at frame rates up to 25/30 PAL/NTSC images per
second (IPS). The IP module also leverages bandwidth
throttling and multicasting capabilities to efficiently
manage bandwidth and storage requirements while
delivering the best possible image quality and resolution.
Tri -stream ing video
Bosch’s innovative tri-streaming feature enables
AutoDomes equipped with the optional IP Communications
Module to generate two independent MPEG-4 streams and
a JPEG stream simultaneously. This allows you to stream
high-quality images for live viewing while recording at a
reduced frame rate, and at the same time, stream JPEG
images to a remote PDA device.
Unsurpassed reliability
AutoDome builds on Bosch’s 10-plus years of experience
designing and manufacturing dome camera systems. All
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. Outdoor EnviroDome
housings provide an operating temperature range down to
–40°C (–40°F). The optional “XT”extended temperature kit
allows AutoDome to operate in temperatures down to –
55°C (–67°F), ensuring reliable operation in even the
harshest environments.
All housings come standard with a rugged polycarbonate
bubble, recessed set screws, and a recessed bubble latch to
reduce the chance of damage from vandalism. Inside the
dome, the power, data, and video are all protected against
unexpected surges of power.
AutoDome 100 Series Fixed Camera System | 3
Ease of installation and servicing
Bosch’s innovative software, the Configuration Tool for
Imaging Devices (CTFID), allows operators or technicians to
change camera settings and even update firmware from
virtually anywhere without need for additional wiring. For
the new Ethernet versions, an embedded Web server lets
the installer access all the user settings, make camera
adjustments, and update firmware via a standard Web
browser.
AutoDome’s innovative design simplifies installation and
servicing. AutoDome reduces maintenance costs because
you can replace individual modules instead of entire camera
assemblies. Simply pop out the old module and slide in the
new ones: it’s almost as easy as changing a light bulb. All
tethers have been replaced with hinges, which makes
installation and servicing safer and easier. You can even
access the built-in power supply without taking down the
dome.
Feature Comparison Matrix
The following table provides an overview of the AutoDome
camera family and its available features:
*Compatible over Coax and UTP transmission only. Remote configuration
over IP via web interface.
Certifications and Approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Installation/Configuration Notes
Ordering Guide
1 Video Format 6 Power (pendants only)
5 Fixed PAL 0
24 VAC
1
6 Fixed NTSC 1 120 VAC
2 Camera Type 2 230 VAC
1 Color (2.7–13.5 mm) 7 Mount Pendant
2 Day/Night (2.7–13.5 mm) W Wall
3 Color (5–50 mm) M Mast
4 Day/Night (5–50 mm) C Corner
3 Enclosure R
In-ceiling
2
C
P Indoor Pendant _
Roof
P Pipe
No Mount
4
2
E Outdoor Pendant 8 Fiber Optics
4 Bubble _ No Fiber
C Clear Rugged F
Fiber
3
T Tinted Rugged
5 Communications
O Fixed (coax, UTP)
E Ethernet (TCP/IP)
1 No transformer included. Customer must supply an approved 24 VAC
limited power supply (VG4-A-PSUx or equivalent). Not available with fiber
optic option.
2 Recessed in-ceiling housing units do not require kit options for reference
numbers 6, 7, or 8.
3 Fiber optic option is multi-mode with bi-phase. Requires LTC 4629 at the
system.
4 R oof mo unt mou nt s to ve rti ca l Pa ra pet. For fl at r oo f in stall ati on , or de r an
additional LTC 9230/01 Flat Roof Adapter Plate.
4 | AutoDome 100 Series Fixed Camera System
Technical Specifications
Camera 2.7 mm-13.5 mm Color
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 78.3° to 18.5°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit) /manual
Synchronization Line-Lock (0° to 358° vertical phase adjust)
or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
SensUp Off 0.29 lx 0.9 lx
SensUp On 0.029 lx 0.09 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
Camera 2.7 mm-13.5 mm Day/Night
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 78.3° to 18.5°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit) /manual
Synchronization Line-Lock (0° to 358° vertical phase adjust)
or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
Day Mode
SensUp Off 0.29 lx 0.9 lx
SensUp On 0.029 lx 0.09 lx
Night Mode
SensUp Off 0.12 lx 0.36 lx
SensUp On 0.012 lx 0.09 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
Camera 5 mm-50 mm - Color
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 47.5° to 5.0°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit) /manual
Synchronization Line-Lock (0° to 358° vertical phase adjust)
or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
SensUp Off 0.42 lx 1.3 lx
SensUp On 0.042 lx 0.13 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
Camera 5 mm-50 mm Day/Night
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 47.5° to 5.0°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit) /manual
Synchronization Line-Lock (0° to 358° vertical phase adjust)
or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
Day Mode
SensUp Off 0.42 lx 1.3 lx
SensUp On 0.042 lx 0.13 lx
Night Mode
SensUp Off 0.17 lx 0.52 lx
SensUp On 0.017 lx 0.052 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
AutoDome 100 Series Fixed Camera System | 5
Mechanical/Electrical
Model In-Ceiling Indoor
EnviroDome®
Pendant
Weight 5.86 lb
(2.66 kg)
6.3 lb
(2.88 kg)
7.3 lb
(3.32 kg)
Pan Range 360° cont. 360° cont. 360° cont.
Tilt Angle 1° above horizon 18° above
horizon
Power 21-30 VAC
50/60 Hz
21-30 VAC
50/60 Hz
18° above
horizon
21-30 VAC
50/60 Hz
Power Draw:
(typ)
Analog Models 7.5 W 7.5 W
Ethernet
11.5 W 11.5 W
43.5 W
47.5 W
5
5
Models
5 Add 16 W if using VG4-SHTR-XT kit.
Surge Suppression
Protection on Video Peak current 10 kA (Gas Tube Arrester), peak
power 1000 W (10/1000ì)
Protection on Power
Input (Dome)
Protection on
Power Output ( Arm
Peak current 7.3 A, peak power 600 W
(10/1000ì)
Peak current 21.4 A, peak power 1500 W
(10/1000ì)
Power Supply)
Environmental
Model In-Ceiling Indoor
EnviroDome®
Pendant
Design Rating IP54 IP66 IP66
Operating Temp. –10°C to 50°C
(14°F to 122°F)
Storage Temp. –10°C to 60°C
(14°F to 140°F)
Humidity 0% to 90%
relative, noncondensing
–10°C to 50°C
(14°F to 122°F)
–10°C to 60°C
(14°F to 140°F)
0% to 90%
relative, noncondensing
–40°C to 50°C
(–40°F to 122°F)
–40°C to 60°C
(–40°F to 140°F)
0% to 100%
relative ,
condensing
Mounts/Accessories
Pendant Arm Mounts
Wall Arm (No Transformer) ENV-PA0
Wall Arm (120/230 VAC Transformer) VGA-A-PA1 / VG4-A-PA2
Wall Arm (120/230 VAC Transformer and
VGA-A-PA1F / VG4-A-PA2F
Fiber Optics)
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate LTC 9542/01
Mast (Pole) Mounting Plate LTC 9541/01
Pendant Pipe Mounts
Pipe Mount Cap VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount VG4-A-9230
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount LTC 9230/01
Power Supplies
Outdoor Power Supply Box (120/230 VAC
VG4-A-PSU1 / VG4-A-PSU2
Tra ns fo rm er )
Outdoor Power Supply Box (120/230 VAC
Transformer and Fiber Optics)
Extended temp heater module extends
VG4-A-PSU1F / VG4 -APSU2F
VG4-SHTR-XT
temperature range to –55°C (–67°F)
®
for EnviroDome
only
Fiber Optic Models
Optical
Fiber Compatibility
50/125 mm, 62 .5/125 mm, low loss multimode
glass fiber, rated for a minimum system
bandwidth of 20 MHz
(video 850 nm/Control 1300 nm)
Max Distance 4 km (2.5 miles)
Miscellaneous
Communications
Bilinx
6
Protocols
6 Bilinx not available on Ethernet models.
User Connections
Power (Camera) 21-30 VAC, 50/60 Hz
Power (Heater) 21-30 VAC, 50/60 Hz
Video
Audio Line In
7 Ethernet models have no UTP analog output only BNC (coax).
8 With Ethernet models, the bi-phase ± can optionally be used as the audio
line in connector.
BNC/UTP
8
9 K ohm typ, 5.5 Vp-p max
7
6 | AutoDome 100 Series Fixed Camera System
469.1
18.47
1
86.7
3.42
4
188.9
7.44
Indoor System Dimensions
188.0
7.40
216.4
201.2
8.52
7.92
374.8
2
76.6
22.6
0.90
299.4
11.79
88.9
3.50
88.9
3.50
76.6
R
3.01
10.2
0.40
5
204.3
8.04
3.01
1.90
0.75
77.0
R
3.03
14.75
R
201.8
7.94
94.1
3.70
134.6
5.30
3
176.0
6.93
6
11.0
0.43
160.0
6.30
184.0
7.25
mm
in
Reference Description Reference Description
1 Wall Mount – Side
4Pipe Mount
with power
supply and trim
skirt removed
2 Wall Mount –
5 In-ceiling Mount – Front
Front with power
supply and trim
skirt
3 Wall Mount –
6 In-ceiling Mount - Side
Back with power
supply and trim
skirt
AutoDome 100 Series Fixed Camera System | 7
549.6
21.64
1
224.0
8.82
58
2.3
133.4
175
6.9
5.25
178
7.0
219.1
8.63
5
193
7.6
38
1.5
133.4
5.25
6
203
8.0
236
9.3
mm
in
Outdoor System Dimensions
346.2
13.63
235.8
9.28
228.6
279.4
1190.8
46.88
11.0
(4)
0.43
86.7
3.42
160.0
6.30
4
224.0
8.82
0.25
254
10.00
8
6.35
0.25
170.0
6.69
134.6
5.30
216.4
8.52
Ø 10.4
378
14.88
184.0
7.25
6.35 Typ
111 Typ
4.37
0.41
16.0 Typ
0.63
279.4
11.00
11.0
Ø
9
04.3
22.9
0.90
299.4
11.79
160.0
6.30
50.8
2.00
105.0
4.13
188.0
7.40
134.6
5.30
3
374.8
2
7
152.4
6.0
101.6 Typ
4.0
10.4
8 x 0.41
114.3
4.50 Typ.
9.0
11.0
1-1/2 NPT
69.9
2.75
14.75
76.6
R
3.01
616
24.25
976.1
38.43
1022.4
40.25
88.1
3.47
Reference Description Reference Description
1Wall Mount – Side
6Corner Mount
with power
supply and trim
skirt
2 Wall Mount –
7Roof Mount
Front with power
supply and trim
skirt
3 Wall Mount –
8Roof Mount Adapter
Back with power
supply and trim
skirt
4 Pipe Mount 9 Power Supply for Pipe
and Roof Mounts
5Mast Mount
8 | AutoDome 100 Series Fixed Camera System
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The
Netherlands
Phone:+31 (0) 40 27 83955
Fax:+31 (0) 40 27 86668
emea.securitysystems@bosch.com
http://www.boschsecurity.com
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone:+1 800 289 0096
Fax:+1 585 223 9180
security.sales@us.bosch.com
http://www.boschsecurity.us
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone:+65 6319 3450
Fax:+65 6319 3499
apr.securitysystems@bosch.com
http://www.boschsecurity.com
Represented by
© Bosch Security Systems 2006 | Data subject to change without notice F3351234827 | Cur: en-US, V1, 7 Sep 2006
Loading...