23
04/2010
en
b) For a milder avour and a larger drink:
Start the brewing process by pressing
the start /stop button.
O Automatic icon ashes. When the au-
tomatic brewing process is complete, N
Manual icon lights up. If you press and
hold the start /stop button within 20 sec-
onds, you can extend the brewing proc-
ess to get your desired drink strength.
Your drink is now ready.
► 20 seconds after the end of each brewing
process, your TASSIMO machine returns
to stand-by mode.
► Do not open the brewing unit before the
a stand-by icon lights up. The T DISC
can then be removed. Now you can sit
back and enjoy your hot drink. If you
wish, you can prepare the next drink
immediately.
► If you do not wish to prepare more drinks,
we recommend that you turn off your
TASSIMO machine using the on/off switch.
! Note:
► There may be short pauses during the
brewing process. This is so the drink
avour is optimised.
► Do not remove the water tank during the
brewing process.
► Always remove the used T DISC after
the brewing process. Be careful and hold
it by the ap because the T DISC is hot
after brewing your drink. When remov-
ing the T DISC, quickly ip it over so that
the printed side is face up to avoid any
dripping.
20 sec.
¡ Risk of scalding
– Wait until the orange light lights up
before opening the brewing unit.
– Never open the brewing unit during
the brewing process.
– Please note that the beverages are
very hot when dispensed.
T DISC storage
T DISCs may be stored in their own packaging or in other containers of your choice.
They should be stored in a cool, dry place.
It is not necessary to store T DISCs in
the refrigerator. Do not keep them in the
freezer. Provided the outer packaging is
intact, T DISCs may be used until the Best
Before date provided, which you can nd
in the gold bar on the side of the foil wrap
package.
2b
01_TAS 40_Heft1.indb 23 06.05.2010 09:53:55