Dishwasher
SPV4EKX29E
[en] User manual
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
en
Table of contents
Safety...............................................4
General information..........................4
Intended use.....................................4
Restriction on user group.................4
Safe installation ................................5
Safe use ...........................................6
Damaged appliance .........................8
Risk to children ................................9
Preventing material damage ........11
Safe installation ..............................11
Safe use .........................................11
Environmental protection and
saving energy................................12
Disposing of packaging .................12
Saving energy.................................12
AquaSensor....................................12
Efficient Dry ....................................12
Installation and connection..........13
Scope of supply .............................13
Installing and connecting the ap-
pliance ............................................13
Drainage connection ......................13
Drinking water connection .............14
Electrical connection ......................14
Familiarising yourself with
your appliance...............................15
Appliance .......................................15
Controls ..........................................16
Programmes ..................................18
Information for test institutes ..........19
Favourite ....................................19
Additional functions .....................20
Features.........................................21
Top basket......................................21
Bottom basket ................................22
Cutlery basket ................................22
Etagere ...........................................22
Folding prongs ...............................23
Knife shelf.......................................23
Basket heights................................23
Before using for the first time ......24
Performing the initial configura-
tion..................................................24
Water softening system................24
Overview of water hardness set-
tings................................................24
Setting the water softening sys-
tem .................................................25
Special salt .....................................25
Switching off the water softening
system ............................................26
Regeneration of the water
softening system ............................26
Rinse aid system...........................27
Rinse aid ........................................27
Setting the amount of rinse aid......27
Switching the rinse aid system
off ...................................................27
Detergent .......................................28
Suitable detergents ........................28
Unsuitable detergents ....................29
Information on detergents ..............29
Adding detergent ...........................29
Tableware ......................................30
Damage to glass and tableware ....30
Arrange tableware ..........................31
Removing tableware.......................32
Basic operation .............................32
Opening appliance door ................32
Switching on the appliance ............32
Setting a programme .....................32
Setting additional functions ............32
Setting timer programming ............33
Starting the programme .................33
Interrupting programme .................33
2
en
Terminate programme....................33
Switching off appliance ..................33
Basic settings................................34
Overview of basic settings .............34
Changing basic settings.................36
HomeConnect ..............................36
HomeConnect quick start .............37
HomeConnect settings..................37
Remote Start ...............................37
Remote Diagnostics ......................38
Software update .............................38
Data protection...............................38
Declaration of Conformity...............38
Cleaning and servicing.................39
Cleaning the tub .............................39
Cleaning products ..........................39
Tips on appliance care...................39
Machine Care .............................39
Filter system ...................................40
Cleaning spray arms ......................41
Troubleshooting............................43
Appliance safety.............................43
Error code / Fault display / Sig-
nal...................................................44
Washing results..............................46
Home Connect problem.................52
Information on display panel..........53
Malfunctions ...................................53
Mechanical damage.......................54
Noise ..............................................55
Clean wastewater pump.................56
Customer Service..........................57
Product number (E-Nr.), production number (FD) and consecut-
ive numbering (Z-Nr.) .....................58
AQUA-STOP guarantee ..................58
Technical specifications...............59
Information regarding Free and
Open Source Software ...................59
Transportation, storage and
disposal .........................................56
Removing the appliance ................56
Protect appliance from frost...........57
Transporting the appliance ............57
Disposing of old appliance ............57
3
en Safety
Safety
Please read the safety information to ensure that you use the appliance safely.
General information
You can find general information for this instruction manual here.
¡ Read this instruction manual carefully. Only this will ensure you
use the appliance safely and efficiently.
¡ This manual is intended for the user of the appliance.
¡ Follow the safety instructions and warnings.
¡ Keep the instruction manual and the product information safe
for future reference or for the next owner.
¡ Check the appliance after unpacking it. Do not connect the ap-
pliance if it has been damaged in transit.
Intended use
Read the information on intended use to ensure that you use the
appliance correctly and safely.
Only use this appliance:
¡ As specified in this instruction manual.
¡ For cleaning household tableware.
¡ In private households and in enclosed spaces in a domestic en-
vironment.
¡ Up to an altitude of max. 4000m above sea level.
Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by children aged 8 or over and by
people who have reduced physical, sensory or mental abilities or
inadequate experience and/or knowledge, provided that they are
supervised or have been instructed on how to use the appliance
safely and have understood the resulting dangers.
Children must not play with the appliance.
Cleaning and user maintenance must not be performed by children unless they are being supervised.
4
Safety en
Keep children under the age of 8 years away from the appliance
and power cable.
Safe installation
Follow these safety instructions when installing the appliance.
WARNING‒Risk of injury!
Improper installation may cause injury.
▶
When installing and connecting the appliance, follow the instructions in the manual and installation instructions.
WARNING‒Risk of electric shock!
¡ Improper installation is dangerous.
▶
Connect and operate the appliance only in accordance with
the specifications on the rating plate.
▶
Connect the appliance to a power supply with alternating
current only via a properly installed socket with earthing.
▶
The protective conductor system of the domestic electrical
installation must be properly installed.
▶
Never equip the appliance with an external switching
device, e.g. a timer or remote control.
▶
When the appliance is installed, the mains plug of the
power cord must be freely accessible. If free access is not
possible, an all-pole isolating switch must be installed in the
permanent electrical installation according to the installation
regulations.
▶
When installing the appliance, check that the power cable is
not trapped or damaged.
¡ Cutting through the supply hose or immersing the Aqua-Stop
valve in water is dangerous.
▶
Never immerse the plastic housing in water. The plastic
housing on the supply hose contains an electric valve.
▶
Never cut through the supply hose. The supply hose contains electric power cables.
5
en Safety
WARNING‒Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.
▶
Do not use extension cables or multiple socket strips.
▶
If the power cord is too short, contact Customer Service.
▶
Only use adapters approved by the manufacturer.
WARNING‒Risk of injury!
Hinges move when opening and closing the appliance door
and can cause injury.
▶
If built-under or integrable appliances are not in a cavity so
that one side is accessible, the hinge area must be covered
at the side. Covers are available from Customer Service or
specialist outlets.
WARNING‒Risk of tipping!
Improper installation may cause the appliance to tip up.
▶
Only install built-under or integrable appliances under a
continuous worktop that is securely connected to adjacent
cabinets.
Safe use
Follow these safety instructions when using the appliance.
WARNING‒Risk of serious harm to health!
Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.
▶
Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.
WARNING‒Risk of explosion!
¡ Adding solvents to the interior of the appliance may cause ex-
plosions.
▶
Never add solvents to the interior of the appliance.
6
Safety en
¡ Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.
▶
Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care
programme.
WARNING‒Risk of injury!
¡ Leaving the appliance door open may result in injury.
▶
Only open the appliance door to load or unload tableware
in order to prevent accidents, e.g. through tripping.
▶
Do not sit or stand on the appliance door when open.
¡ Knives and utensils with sharp points can cause injuries.
▶
Arrange knives and utensils with sharp points in the cutlery
basket with the points downwards, on the knife shelf or in
the cutlery drawer.
WARNING‒Risk of scalding!
If you open the appliance door while the programme is running, hot water may splash out of the appliance.
▶
Open the appliance door carefully if the programme is still
running.
WARNING‒Risk of tipping!
Overfilling the Baskets may cause the appliance to tip up.
▶
Never overfill the Baskets with free-standing appliances.
WARNING‒Risk of electric shock!
¡ An ingress of moisture can cause an electric shock.
▶
Only use the appliance in enclosed spaces.
▶
Never expose the appliance to intense heat or humidity.
▶
Do not use steam- or high-pressure cleaners to clean the
appliance.
7
en Safety
¡ If the insulation of the power cord is damaged, this is danger-
ous.
▶
Never let the power cord come into contact with hot appliance parts or heat sources.
▶
Never let the power cord come into contact with sharp
points or edges.
▶
Never kink, crush or modify the power cord.
Damaged appliance
Follow the safety instructions if the appliance is damaged.
WARNING‒Risk of electric shock!
¡ If the appliance or the power cord is damaged, this is danger-
ous.
▶
Never operate a damaged appliance.
▶
Never operate an appliance with a cracked or fractured surface.
▶
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
▶
If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.
▶
"Call Customer Service." →Page57
▶
Repairs to the appliance should only be carried out by
trained specialist staff.
¡ Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by
trained specialist staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be
replaced with a special connection cable, which is available
from the manufacturer or his Customer Service.
8
Safety en
Risk to children
Follow the safety instructions if there are children in your home.
WARNING‒Risk of suffocation!
¡ Children may put packaging material over their heads or wrap
themselves up in it and suffocate.
▶
Keep packaging material away from children.
▶
Do not let children play with packaging material.
¡ Children may breathe in or swallow small parts, causing them
to suffocate.
▶
Keep small parts away from children.
▶
Do not let children play with small parts.
WARNING‒Risk of harm to health!
Children can lock themselves in the appliance, thereby putting
their lives at risk.
▶
With redundant appliances, unplug the power cord. Then
cut through the cord and damage the lock on the appliance
door beyond repair so that the appliance door will no longer
close.
WARNING‒Risk of crushing!
With higher-level appliances, children can become crushed
between the appliance door and cabinet doors underneath.
▶
Keep an eye on children when opening and closing the appliance door.
WARNING‒Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the
mouth, throat and eyes.
▶
Keep children away from detergent and rinse aid products.
▶
Keep children away from the appliance when open. The water in the interior of the dishwasher is not drinking water. It
may contain residues of detergents and rinse aid.
9
en Safety
WARNING‒Risk of injury!
Children may get their fingers caught in the slots of the tablet
collecting tray and injure themselves.
▶
Keep children away from the appliance when open.
WARNING‒Risk of suffocation!
Children may become trapped in the appliance and suffocate.
▶
Use the childproof lock if fitted.
▶
Never let children play with or operate the appliance.
10
Preventing material damage en
Preventing material damage
Preventing material damage
Preventing material damage
Follow these instructions to prevent
material damage to your appliance,
accessories or other objects in your
kitchen.
Safe installation
Follow the instructions when installing
the appliance.
ATTENTION!
¡ Improper installation of the appli-
ance may cause damage.
▶
If the dishwasher is installed
above or below other domestic
appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances.
▶
If there is no information or if the
installation instructions do not include the relevant information,
contact the manufacturer of
these appliances to check that
the dishwasher can be installed
above or below these appliances.
▶
If no information is available
from the manufacturer, the dishwasher should not be installed
above or below such appliances.
▶
To ensure the safe operation of
all domestic appliances, continue following the installation instructions for the dishwasher.
▶
Do not install the dishwasher under a hob.
▶
Do not install the dishwasher
near heat sources, e.g. radiators, heat storage tanks, ovens
or other appliances that generate heat.
¡ Modified or damaged water hoses
may result in material damage and
damage to the appliance.
▶
Never kink, crush, modify or cut
through water hoses.
▶
Only use the water hoses supplied with the appliance or genuine spare hoses.
▶
Never re-use water hoses that
have been used before.
¡ If the water pressure is too high or
too low, this may impair functioning of the appliance.
▶
Make sure that the water pressure in the water supply system
is min. 50kPa (0,5bar) and
max. 1000kPa (10bar).
▶
If the water pressure exceeds
the maximum value specified, a
pressure-reducing valve must be
installed between the drinking
water connection and the hose
set of the appliance.
Safe use
Follow the instructions when using
the appliance.
ATTENTION!
¡ Escaping water vapour can dam-
age fitted units.
▶
When the programme ends,
leave the appliance to cool
down for a while before opening
the door.
¡ Special salt can damage the tub
due to corrosion.
▶
To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the programme starts.
¡ Detergent may damage the water
softening system.
▶
Only fill the dispenser of the water softening system with special
dishwasher salt.
11
en Environmental protection and saving energy
¡ Unsuitable cleaning agents may
damage the appliance.
▶
Do not use a steam cleaner.
▶
So as not to scratch the finish
on the appliance, do not use
sponges with a rough surface or
abrasive cleaning agents.
▶
To prevent corrosion, do not use
sponge cloths on dishwashers
with a stainless steel front or
rinse such cloths thoroughly
several times before using them
for the first time.
Environmental protection and saving energy
Environmental protection
and saving energy
Environmental protection and saving energy
Help protect the environment by using your appliance in a way that conserves resources and by disposing of
reusable materials properly.
Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶
Sort the individual components by
type and dispose of them separately.
Information about current disposal
methods are available from your
specialist dealer or local authority.
Saving energy
AquaSensor
The AquaSensor is an optical measuring device (light barrier) which
measures the turbidity of the rinsing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
high, the rinsing water is drained off
and replaced with fresh water. If the
soiling level is lower, the rinsing water is used in the next wash cycle, so
reducing water consumption by 3-6
litres. In the automatic programmes
the temperature and run time are additionally adjusted to the level of soiling.
Efficient Dry
The appliance door opens automatically during the drying phase. This ensures a particularly economical drying result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"0h:00m".
If the automatic door opening is deactivated, energy consumption increases and the drying phase is usually reduced.
→"Additional functions", Page20
→"Overview of basic settings",
Page34
If you follow these instructions, your
appliance will use less electricity and
less water.
Use the Eco50° programme.
The Eco50° programme is energy-efficient and environmentally
friendly.
→"Programmes", Page18
12
Installation and connection en
Installation and connection
Installation and connection
Installation and connection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the specified criteria and the installation instructions.
Scope of supply
After unpacking all parts, check for
any damage in transit and completeness of the delivery.
If you have any complaints, contact
the dealer who sold you the appliance or our Customer Service.
Note:The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Warranty
¡ Installation material
¡ Steam guard plate
¡ Mains cable
¡ Quick reference guide
Installing and connecting the appliance
You can position your built-under or
integrable appliance in a fitted kitchen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appliance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous worktop that is securely connected to adjacent cabinets.
1. "Follow the safety instructions."
→Page4
2. "Follow the instructions for elec-
trical connection." →Page14
3. Check the Scope of supply and
the condition of the appliance.
4. Consult the installation instructions
for the installation dimensions required.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6. "Install the drainage connection."
→Page13
7. "Install the drinking water connec-
tion." →Page14
8. Connect the appliance to the
power supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is discharged via the wash cycle.
Installing the drainage connection
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3. When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4. Also check that there is no cover
in the drainage system preventing
the wastewater from being discharged.
13
en Installation and connection
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water connection
Note:If you are replacing the appli-
ance, you must use a new water supply hose.
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the appliance to the drink-
ing water connection using the enclosed parts.
Observe the "Technical data"
→Page59.
3. When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the electricity supply
Notes
¡ Follow the "Safety instructions"
→Page5.
¡ Connect the appliance to alternat-
ing current only, in the range of
220 - 240V and 50Hz or 60Hz.
¡ Please note that the water safety
system is only functional if there is
a power supply.
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3. Check that the mains plug is inser-
ted properly.
14
Familiarising yourself with your appliance en
1
2
3
4
5
6
7
8
9
10
11
12
1
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Familiarise yourself with the parts of your appliance.
Appliance
You can find an overview of the parts of your appliance here.
Rating plate Rating plate with "E number and FD number"
1
Depending on the appliance specifications
→Page58.
The data you need for "Customer Service"
→Page57.
15
en Familiarising yourself with your appliance
2
3
4
5
6
7
8
9
10
11
12
Detergent dispenser "Detergent" →Page28 is added to the detergent
dispenser.
Bottom basket "Bottom basket" →Page22
Filter system "Filter system" →Page40
Dispenser for special salt Add the special salt to the dispenser for special salt.
→"Water softening system", Page24
Tablet collecting tray During the wash cycle tablets automatically fall out of
the detergent dispenser into the tablet collecting tray
where they can fully dissolve.
Top basket "Top basket" →Page21
Cutlery shelf
Upper spray arms The upper spray arms wash the tableware in the top
Lower spray arm The lower spray arm washes the tableware in the bot-
Cutlery basket "Cutlery basket" →Page22
1
"Cutlery shelf" →Page22
basket.
If the tableware has not been washed properly, clean
the spray arms.
→"Cleaning spray arms", Page41
tom basket.
If the tableware has not been washed properly, clean
the spray arms.
→"Cleaning spray arms", Page41
Dispenser for rinse aid Add rinse aid to the dispenser for rinse aid.
1
Depending on the appliance specifications
→"Rinse aid system", Page27
Controls
The controls are used to configure all functions of your appliance and to obtain
information about the operating status.
With some buttons you can perform different functions.
16
Familiarising yourself with your appliance en
1 2 3 4 5 6 7 8
910111213
1
2
3
4
5
6
7
8
9
10
11
12
13
ON/OFF button and reset button "Switching on the appliance" →Page32
"Switching off the appliance" →Page33
"Terminating the programme" →Page33
Programme buttons "Programmes" →Page18
Special salt refill indicator "Water softening system" →Page24
Rinse aid refill indicator "Rinse aid system" →Page27
WLAN display "Home Connect" →Page36
Water supply display Display for water supply
Programme buttons and additional
functions
Start button "Starting the programme" →Page33
button If you press for approx. 3 seconds,
Remote Start →"Remote Start ", Page37
Timer programming "Setting timer programming" →Page33
Door opener
Display The display shows information about the remain-
1
Depending on the appliance specifications
1
"Programmes" →Page18
"Additional functions" →Page20
you can open the basic settings.
"Opening the appliance door" →Page32
ing running time or the basic settings. You can
change the basic settings via the display and the
setting buttons.
17
en Programmes
Programmes
Programmes
Programmes
You can find an overview of the programmes that can be selected here.
Different programmes, which can be
found on the control panel of your
appliance, are available depending
on the appliance configuration.
The running time may vary depending on the programme selected. The
running time depends on the water
temperature, the quantity of tableware, the level of soiling and the "Additional function" →Page20 selec-
Programme Use Programme sequence Additional func-
Tableware:
Intensive 70°
¡ Washing pots and pans,
non-fragile tableware and
cutlery.
Level of soiling:
¡ Removing stubborn
burned or dried-on food
remnants containing
starch and protein.
Tableware:
Auto 45-65°
¡ Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡ Removing common
household food remnants
lightly dried-on.
Tableware:
Eco 50°
¡ Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡ Removing common
household food remnants
lightly dried-on.
ted. The running time will change if
the rinse aid system is switched off
or rinse aid needs to be added.
The consumption values can be
found in the quick reference guide.
The consumption values relate to
normal conditions and a water hardness of 16-20°°E. Different influencing factors such as water temperature or pipe pressure may result in
deviations.
tions
Intensive:
¡ Pre-Rinse
¡ Cleaning 70°C
¡ Intermediate rinse
All
→"Additional
functions",
Page20
¡ Final rinse 69°C
¡ Drying
Sensor-controlled:
¡ Optimised by sensors de-
pending on the soiling of
the rinsing water.
Most economical programme:
¡ Pre-Rinse
¡ Cleaning 50°C
All
→"Additional
functions",
Page20
All
→"Additional
functions",
Page20
¡ Intermediate rinse
¡ Final rinse 60°C
¡ Drying
18
Programmes en
Programme Use Programme sequence Additional func-
tions
Silence 50
Tableware:
¡ Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡ Removing common
household food remnants
Reduced noise:
¡ Pre-Rinse
¡ Cleaning 50°C
¡ Intermediate rinse
¡ Final rinse 65°C
¡ Drying
All
→"Additional
functions",
Page20
lightly dried-on.
Express 65° - 1h
Tableware:
¡ Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡ Removing common
Time-optimised:
¡ Cleaning 65°C
¡ Intermediate rinse
¡ Final rinse 69°C
¡ Drying
EfficientDry
→"Additional
functions",
Page20
household food remnants
lightly dried-on.
Machine Care
Only when using unloaded
appliance.
Machine Care 70°C None
- - -
Favourite
Note:The relatively long running time
in the Eco50° programme is due to
longer soaking and drying times. This
results in optimal consumption values.
Information for test institutes
Test institutes are provided with information for comparability tests, e.g.
according to EN60436.
These are the conditions for conducting the tests, however they are not
the results or consumption values.
E-mail enquiries to: dishwasher@testappliances.com
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rating plate on the appliance door.
1
Depending on the appliance specifications
Favourite
You can save a combination of a programme and an additional function to
the button.
You can save the program via the
Home Connect app or on the appliance.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermediate cleaning via cold rinsing.
Tip:You can use the Home Connect
app to download additional programmes and save them to the
button.
Save Favourite on the appliance.
1. Open the appliance door.
2. Press .
1
19
en Additional functions
3. Press the right programme button.
→"Programmes", Page18
4. Press the button for the relevant
additional function.
→"Additional functions", Page20
5. Press for approx. 3seconds.
a The selected programme and the
additional function will flash.
a flashes.
a The programme and the additional
function are saved.
Tip:To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→"Overview of basic settings",
Page34
Additional functions
Additional functions
Additional functions
You can find an overview of the additional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configuration.
Additional function
SpeedPerfect+
Use
¡ The run time is
shortened by 15% to
75% depending on the
rinse programme.
¡ Energy and water con-
sumption are increased.
If you select this additional
function, "automatic door
opening" →Page34 in
the "o02" setting is deactivated.
Additional function
IntensiveZone
EfficientDry
Use
¡ Switch on with mixed
loads containing tableware with different soiling levels, e.g. place
very soiled pots and
pans in the bottom basket and normally soiled
tableware in the upper
basket.
¡ The spray pressure in
the bottom basket is increased and the maximum programme temperature held longer.
This will increase the
run time and energy
consumption.
¡ The appliance door
opens automatically
during the drying
phase.
¡ Depending on the basic
setting selected, automatic door opening is
activated or deactivated
by the addional function. The additional
function button lights
up when automatic
door opening is activated.
¡ With the setting "o02"
automatic door opening
cannot be deactivated
in the Eco 50 °C program.
→"Efficient Dry", Page12
20
Features
a
Features
Features
You can find an overview of the possible features of your appliance and
how to use them here.
These features depend on the model
of your appliance.
Top basket
Arrange cups and glasses in the top
basket.
Features en
The basket can then slip down
slightly.
4. Raise or lower the basket evenly to
the right level.
→"Basket heights", Page23
Knife shelf
1
You can adjust the height of the top
basket to make room for larger items
of tableware.
Adjusting top basket with side levers
To wash large items of tableware in
the baskets, adjust the shelf position
of the top basket.
1. Pull out the top basket.
2. To prevent the basket from sud-
denly dropping down, hold the
side of the basket by the top edge.
3. Press in the levers on the right and
left on the outside of the basket.
1
Depending on the appliance specifications
Check that the basket is level on
both sides.
5. Slide the basket back in.
21
en Features
a
Bottom basket
Arrange pans and plates in the bottom basket.
Cutlery basket
Large plates up to a diameter of
31cm can be arranged in the bottom
basket as shown.
1
Cutlery basket
Arrange cutlery in the cutlery basket,
always without sorting it and with the
sharp points downwards.
Etagere
Use the cutlery shelf and space underneath for small cups and glasses
or for large items of cutlery, e.g.
wooden spoons or serving cutlery.
1
Depending on the appliance specifications
22
If you do not need the cutlery shelf,
you can fold it up.
Folding prongs
1
2
Use the folding prongs to position
tableware securely, e.g. plates.
Features en
2. To use the prongs again, fold them
back up.
a The prongs audibly click into posi-
tion.
You can fold the prongs down to position pans, bowls and glasses
1
better.
Folding down prongs
1
Knife shelf
Use the shelf for knives and long
items of cutlery.
If you do not need the prongs, fold
them down.
1. Push the lever forwards and fold
down the prongs .
Basket heights
Set the baskets at the right height.
Appliance height 81.5cm with cutlery basket
Setting Top basket Bottom basket
1 max. ø 22 cm 31 cm
2 max. ø 24.5 cm 27.5 cm
3 max. ø 27 cm 25 cm
1
Depending on the appliance specifications
23
en Before using for the first time
Before using for the first time
Before using for the
2.
3. "Switch on the appliance."
first time
Before using for the first time
Configure the settings for initial startup.
Performing the initial configuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:Connect your appliance to a mobile device. You can conveniently
change all settings via the
HomeConnect app.
→"HomeConnect quick start",
Page37
Requirement:"The appliance has
been installed and connected."
→Page13
1.
"Add special salt." →Page25
Overview of water hardness settings
4. "Setting the water softening sys-
5. "Set the amount of rinse aid to be
Tip:You can change these settings
and other "Basic settings"
→Page34 at any time.
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
"Add rinse aid." →Page27
→Page32
tem." →Page25
dispensed." →Page27
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 Soft 0 - 1.1 H00
9 - 10 Soft 1.2 - 1.4 H01
11 - 12 Medium 1.5 - 1.8 H02
13 - 15 Medium 1.9 - 2.1 H03
16 - 20 Medium 2.2 - 2.9 H04
21 - 26 Hard 3.0 - 3.7 H05
27 - 38 Hard 3.8 - 5.4 H06
39 - 62 Hard 5.5 - 8.9 H07
24
Water softening system en
a
Note:Set the water hardness determined on your appliance.
→"Setting the water softening sys-
tem", Page25
With a water hardness of 0 - 8°E
you can dispense with special salt
and switch off the water softening
system.
→"Switching off the water softening
system", Page26
Setting the water softening system
Set the water hardness on your appliance.
1. Determine the water hardness and
the appropriate setting value.
→"Overview of water hardness set-
tings", Page24
2. Press .
3. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
4. Press repeatedly until the
right water hardness has been set.
The value H04 is set at the factory.
5. To save the settings, press
for 3 seconds.
ATTENTION!
¡ Detergent may damage the water
softening system.
▶
Only fill the dispenser of the water softening system with special
dishwasher salt.
¡ Special salt can damage the tub
due to corrosion.
▶
To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the programme starts.
1. Unscrew the lid of the dispenser
for special salt and remove.
2. On initial start-up: Fill the dispenser
right up with water.
3. Note:Only use special salt for
dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dispenser.
Special salt
You can use special salt to soften
water.
Adding special salt
If the special salt refill indicator lights
up, add special salt to the dispenser
for special salt just before the programme starts. The amount of special salt required depends on the water hardness: the higher the water
hardness, the greater the amount of
special salt required.
1
Depending on the appliance specifications
Funnel
1
Fill the dispenser right up with special salt. The water in the dispenser is displaced and forced
out.
4. Place the lid back on the dis-
penser and turn to close.
25
en Water softening system
Switching off the water softening system
If you find the special salt refill indicator irritating, e.g. when using combined detergents with salt replacement substances, you can switch the
salt refill indicator off.
Note
To avoid damage to the appliance, only
switch off the water softening system in
the following cases:
¡ The water hardness is max. 26 °E
and you are using combined detergents with salt replacement substances. According to manufacturers, combined detergents with salt
replacement substances can generally only be used up to a water
hardness of 26 °E without adding
special salt.
¡ The water hardness is 0 - 8°E.
You do not need to use special
salt.
1. Press .
2. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
3. Press repeatedly until the dis-
play shows H00.
4. To save the settings, press
for 3 seconds.
a The water softening system is
switched off and the salt refill indicator is deactivated.
Regeneration of the water softening system
In order to obtain fault-free function of
the water softening system, the appliance performs regeneration of the
water softening system at regular intervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all programmes. It will increase the run time
and consumption values, e.g. water
and electricity.
Overview of consumption values with regeneration the water softening system
Here you can find an overview of the
maximum additional run time and
consumption values during regeneration of the water softening system.
Regeneration of the water softening
system after x rinse cycles
Additional run time in minutes 6
Additional water consumption in
litres
Additional power consumption in
kWh
The consumption values specified
are laboratory measurements determined in accordance with the currently
applicable standard and using the
Eco 50° programme and the factory
value of the water hardness is set to
16 - 20°E.
7
5
0.05
26
Rinse aid system en
1
2
max
Rinse aid system
Rinse aid system
Rinse aid system
You can use the rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid and lift
.
2. Add rinse aid up to the max mark.
Spilled rinse aid can cause excessive frothing during the wash
cycle.
4. Close the lid of the dispenser for
rinse aid.
a The lid clicks into position.
Setting the amount of rinse aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1. Press .
2. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
3. Press repeatedly until
the display shows the value set at
the factory r04.
4. Press repeatedly until the
right amount of rinse aid has been
set.
– A low setting adds less rinse aid
during the wash cycle and reduces streaking on tableware.
– A higher setting adds more
rinse aid during the wash cycle,
reduces water marks and improves the drying result.
5. To save the settings, press
for 3 seconds.
3. If rinse aid spills out, remove it
from the tub.
Switching the rinse aid system off
If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid component, you can switch the rinse aid system off.
Tip:The function of rinse aid is limited with combined detergents. You
will generally get better results using
rinse aid.
27
en Detergent
1. Press .
2. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
3. Press repeatedly until
the display shows the value set at
the factory r04.
4. Press repeatedly until the dis-
play shows r00.
5. To save the settings, press
for 3 seconds.
a The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.
Detergent
Detergent
Detergent
Find out which detergents are suitable for your appliance.
Suitable detergents
Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying results, use separate detergent, adding
"Special salt" →Page25 and "Rinse
aid" →Page27 separately.
Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygenbased bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.
Note:Follow the manufacturer's instructions for each detergent.
Detergent Description
Tabs Tabs are suitable for all
cleaning functions and do
not need to be measured
out.
With shorter "Programmes" →Page18 tabs
sometimes do not dissolve
entirely and leave residues
of detergent. This may impair the cleaning effect.
Powder detergent
Powder detergent is recommended for shorter
"Programmes" →Page18.
The dosage can be adjusted to the level of soiling.
Liquid detergent Liquid detergent works
faster and is recommended for shorter "Programmes" →Page18
without PreRinse.
Sometimes liquid detergent may leak out despite
the detergent dispenser
being closed. This is not a
fault and is non-critical if
you remember the following:
¡ Only choose a pro-
gramme without PreRinse.
¡ Do not select timer pro-
gramming for starting
the programme.
The dosage can be adjusted to the level of soiling.
Tip:Suitable detergents are available
online via our website or from "Customer Service" →Page57.
28
Separate detergents
Separate detergents are products
that do not contain components other
than detergent, e.g. powder detergent or liquid detergent.
Detergent en
With powder and liquid detergent the
dosage can be individually adjusted
to the level of soiling of the tableware.
For better washing and drying results
and to avoid damage to the appliance, please additionally use "Special salt" →Page25 and "Rinse aid"
→Page27.
Combined detergent
Besides conventional separate detergents, a number of products are
available with additional functions.
These products contain not only detergent but also rinse aid and salt replacement substances (3in1) and,
depending on the combination (4in1,
5in1,...), additional components such
as glass protection or stainless steel
cleaner.
According to manufacturers, combined detergents generally only function up to a water hardness of 26
°E. With a water hardness above 26
°E you will need to add special salt
and rinse aid. For the best washing
and drying results we recommend
using special salt and rinse aid from
a water hardness of 17°E. If you are
using combined detergent, the washing programme is adjusted automatically to ensure the best possible
washing and drying result.
Unsuitable detergents
Do not use detergent which could
cause damage to the appliance or
present a risk to health.
Detergent Description
Hand washing-up
liquid
Hand washing-up liquid
can cause increased frothing and damage the appliance.
Detergent Description
Detergent containing chlorine
Chlorine residue on tableware may present a risk to
health.
Information on detergents
Follow the instructions on detergents
in everyday use.
¡ Detergents marked as "organic" or
"ecological" (environmentally
friendly) generally contain lower
levels of active agents or completely dispense with certain substances. The cleaning effect may
be restricted here.
¡ Set the rinse aid and the water
softening system to the separate
detergent or combined detergent
in use.
¡ According to manufacturers, com-
bined detergents with salt replacement substances can only be used
up to a certain water hardness,
usually 26 °E, without adding special salt. For the best washing and
drying results we recommend using special salt from a water hardness of 17°E.
¡ To prevent sticking, only touch de-
tergents in a water-soluble pouch
with dry hands and only ever place
them in a dry detergent dispenser.
¡ Even if the rinse aid and special
salt refill indicators light up, washing programmes will run properly
with combined detergents.
¡ The function of rinse aid is limited
with combined detergents. You will
generally get better results using
rinse aid.
¡ Use tablets with a special drying
performance.
Adding detergent
1. To open the detergent dispenser,
press the locking latch.
29
en Tableware
15 ml
25 ml
50 ml
2. Add the detergent to the dry deter-
gent dispenser.
If you are using tablets, one is
enough. Insert the tablets in a horizontal position.
If you are using powder or liquid
detergent, follow the manufacturer's instructions and quantities
for dosage in the detergent dispenser.
20ml–25ml detergent is sufficient for normal soiling. If tableware is only lightly soiled, slightly
less than the amount of detergent
specified is usually sufficient.
3. Close the lid of the detergent dis-
penser.
a The lid clicks into position.
a The detergent dispenser will open
automatically at the optimum time
during the programme. Powder or
liquid detergent will spread around
the washing tank and dissolve
there. Tablets will fall into the tablet
collecting tray and dissolve in the
right dosage. In order to ensure
that tablets can dissolve evenly, do
not place any other objects in the
tablet collecting tray.
Tip:If you use powder detergent and
select a program with pre-rinse, you
can also add a little detergent to the
interior door of the appliance.
Tableware
Tableware
Tableware
Only clean tableware that is suitable
for dishwashers.
Note:Decorated glassware and parts
made of aluminium or silver may
fade or discolour with dishwashing.
Delicate types of glass may turn
cloudy after a few washing cycles.
Damage to glass and tableware
Avoid damage to glass and tableware.
Cause Recommendation
The following tableware is not dishwasher-safe:
¡ Items of cutlery
and tableware
made from wood
¡ Decorated glass-
ware, antique and
hand-crafted tableware
¡ Plastic parts not
resistant to heat
¡ Tableware made
from copper or tin
¡ Tableware soiled
with ash, wax, lubricating grease or
paint
¡ Very small items of
tableware
Only put tableware in
the dishwasher if it is
marked as dishwasher-safe by the
manufacturer.
30
Tableware en
Cause Recommendation
Glass and tableware
was not dishwashersafe.
Only put glasses and
china in the dishwasher if it is marked
as dishwasher-safe by
the manufacturer.
The chemical composition of the detergent causes damage.
Use a detergent
marked as gentle on
tableware by the manufacturer.
Highly caustic alkaline
or highly acidic cleaning agents, in particular commercial or industrial cleaning
agents, are not suitable for dishwashers
in conjunction with
aluminium.
The water temperature of the programme
is too high.
If you are using highly
caustic alkaline or
highly acidic cleaning
agents, in particular
commercial or industrial cleaning agents,
do not put aluminium
parts in the dishwasher interior.
Select a programme
with lower temperatures.
After the programme
has ended, take glassware and cutlery out
of the appliance
without delay.
Arrange tableware
Arrange the tableware correctly to
optimise the dishwashing result and
prevent damage to both the appliance and tableware.
Tips
¡ Using the appliance allows you to
save energy and water compared
to washing-up by hand.
¡ See our website for examples of
how to load your appliance efficiently, free of charge.
¡ To save energy and water, load
the machine with the number of
place settings specified.
→"Technical specifications",
Page59
¡ For better washing and drying res-
ults, position items with curves or
recesses at an angle so the water
can run off.
1. Remove large remnants of food
from your tableware.
To save resources, do not pre-
rinse tableware under running water.
2. Observe the following when arran-
ging tableware:
– Put heavily soiled tableware in
the bottom basket, e.g. pans.
The more powerful the spray jet,
the better the dishwashing result
will be.
– To prevent damage to table-
ware, arrange it so it is stable
and cannot tip over.
– To prevent injury, arrange cut-
lery with the points and sharp
edges downwards.
– Position containers with the
openings facing down so no water can collect in them.
– Do not block the spray arms -
make sure that they can turn
freely.
– Do not place small parts in the
tablet collecting tray and do not
block it with tableware so as not
to obstruct the lid of the detergent dispenser.
31
en Basic operation
Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
1. To prevent water dripping on the
tableware, unload it starting at the
bottom and working up.
2. Check the washing tank and ac-
cessories for soiling and clean if
necessary.
→"Cleaning and servicing",
Page39
Basic operation
Basic operation
Basic operation
You can find out everything you need
to know about operating your appliance here.
Opening appliance door
▶
Open the appliance door.
Switching on the appliance
▶
Press .
The Eco 50° programme is set by
default.
The Eco 50° programme is an especially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most efficient programme for the combination of energy/water consumption
for this type of tableware and evidences conformity with the EU Ecodesign Directive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soiling level of the tableware, select a
suitable programme.
▶
Press the right programme button.
→"Programmes", Page18
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the display.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the programme selected.
→"Programmes", Page18
▶
Press the button for the relevant
additional function.
→"Additional functions", Page20
a The additional function is set and
the additional function button
flashes.
32
Basic operation en
Setting timer programming
You can delay the start of the programme by up to 24hours.
1. Press .
a "h:01" appears in the display.
2. Use to set the required start
time for the programme.
3. Press .
a This activates timer programming.
Tip:To deactivate timer programming, press repeatedly until "h:00"
appears in the display.
Starting the programme
▶
Press .
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you cancel it.
→"Terminate programme",
Page33
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door immediately after the programme has
ended, the appliance will switch off
after 4 seconds.
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press .
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to cancel it first.
1. Open the appliance door.
2. Press for approx.
4seconds.
3. Close the appliance door.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on
"Safe use" →Page11.
2. Press .
Tip:If you press during the wash
cycle, the programme currently running will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
33
en Basic settings
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H04
1
H00 - H07 Set the water softening system to
your water hardness.
→"Setting the water softening system", Page25
Level H00 switches the water softening system off.
Rinse aid dispensing r04
1
r00 - r06 Set the amount of rinse aid to be dis-
pensed.
→"Setting the amount of rinse aid",
Page27
Switch the rinse aid system off with
level r00.
Intensive drying d00
1
d00 - d01 The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Hot water A00
1
A00 - A01 Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installation is available, e.g. solar heating
system with circulation line. The water temperature should be at least
40°C and max. 60°C.
Switch hot water on "A01" or off
"A00".
1
Factory setting (may vary according to model)
34
Basic settings en
Basic setting Display text Selection Description
TimeLight S01
1
S00 - S01 Switch TimeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door
relating to timer programming, the
programme or the time remaining. If
the base panel is pulled forwards or
if the appliance is installed at eye
level with the cabinet front fitted
flush, the display is not visible.
Level "S00" switches TimeLight off.
Tone volume b02
1
b00 - b03 Adjustment of tone volume.
Level "b00" switches the signal tone
off.
If the Eco drying function is activated, the end of the programme is
not indicated by an audible signal
tone.
Efficient Dry o02
1
o00 - o02 Activate or deactivate automatic
opening of the appliance door during
the drying phase.
The following settings are possible:
¡ With the "o00" setting, automatic
door opening is deactivated in all
programmes.
¡ With the setting "o01" automatic
door opening is activated in all
programmes.
¡ With the "o02" setting, automatic
door opening is only activated in
the Eco 50° programme.
→"Efficient Dry", Page12
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
1
Factory setting (may vary according to model)
35
en HomeConnect
Basic setting Display text Selection Description
Remote Start rc1
1
rc0 - rc2 Activate or deactivate
→"Remote Start ", Page37.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page37
¡ With the setting "rc2", the func-
tion is permanently activated.
Factory setting rE Start with
YES
Confirm with
Restore changed settings to the factory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Open the appliance door.
2. Press .
3. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
4. Press repeatedly until
the display shows the required setting.
5. Press repeatedly until the dis-
play shows the right value.
You can change several settings.
6. To save the settings, press
for 3 seconds.
7. Close the appliance door.
HomeConnect
HomeConnect
HomeConnect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
HomeConnect app.
The HomeConnect services are not
available in every country. The availability of the HomeConnect function
depends on the availability of
HomeConnect services in your country. You can find information about
this at: www.home-connect.com.
To be able to use HomeConnect,
you must first set up the connection
to the WLAN home network (Wi-Fi1)
and to the HomeConnect app.
¡ →"Connecting the appliance to
WLAN home network (Wi-Fi)",
Page37
The HomeConnect app guides you
through the entire login process. Follow the instructions in the HomeConnect app to configure the settings.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
36
Tips
¡ Please consult the documents sup-
plied by HomeConnect.
¡ Please also follow the instructions
in the HomeConnect app.
Note:Please note the safety precautions in this instruction manual and
make sure that they are also observed when operating the appliance
via the HomeConnect app.
→"Safety", Page4
HomeConnect quick start
Connect your appliance to a mobile
device quickly and easily.
Installing app
1. Install the HomeConnect app on
your mobile device.
2. Start the app and set up access
for HomeConnect.
The HomeConnect app guides
you through the entire login process.
Connecting the appliance to WLAN home network (Wi-Fi)
Requirements
¡ HomeConnect app is installed on
your mobile device.
¡ Wi-Fi on the router is activated.
¡ The basic setting Wi-Fi is activated
on the appliance.
¡ The appliance receives signals
from the WLAN home network (WiFi) at its installation location.
1. With the help of the HomeConnect
App scan the QR code.
HomeConnect en
2. Follow the instructions in the
HomeConnect app.
HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect settings in the basic settings for your appliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Remote Start
You can use the HomeConnect app
to start the appliance with your mobile device.
Tip:If you select "rc2" in the "Basic
settings" →Page36 of this function,
the function is permanently activated
and you can start your appliance with
a mobile device at any time.
Activating Remote Start
When you have selected "rc1" in the
basic settings of this function, activate the function on your appliance.
Requirements
¡ The appliance is connected to your
WLAN home network.
¡ The appliance is connected to the
HomeConnect app.
¡ "rc1" is selected in the "Basic set-
tings " →Page36 of this function.
¡ A programme is selected.
▶
Press .
37
en HomeConnect
If you open the appliance door, the
function is automatically deactivated.
a button lights up.
Tip:To deactivate the function, press
.
Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appliance connected to the HomeConnect server and if Remote Diagnostics is available in the country in
which you are using the appliance.
Tip:For further information and details about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-connect.com
Software update
You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The HomeConnect app informs you
about available software updates.
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module installed).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance
with Home Connect functionality
meets the essential requirements and
other relevant provisions of the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
38
2.4GHz band: 100mW max.
5GHz band: 100mW max.
BE BG CZ DK DE EE IE EL
ES FR HR IT CY LV LT LU
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5GHz WLAN (Wi-Fi): For indoor use only.
Cleaning and servicing en
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶
Never use detergents containing
chlorine.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Add detergent to the detergent dis-
penser.
3. Select the programme with the
highest temperature.
→"Programmes", Page18
4. "Start the programme without
tableware." →Page33
Machine Care
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→"Safe use", Page11
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action Benefit
Wipe the door seals,
the front of the dishwasher and the control panel regularly using a damp cloth and
washing-up liquid.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This ensures the parts
of the appliance will
remain clean and hygienic.
This will prevent unpleasant odours.
Deposits, e.g. from remnants of food
and limescale, can cause your appliance to malfunction. To avoid such
faults and reduce odours, we recommend cleaning your appliance at regular intervals.
Machine Care combined with machine care products and machine
cleaners is the right programme for
the care of your appliance.
Tip:You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online
at https://www.bosch-home.com/
store or from customer service.
Machine Care is a programme which
removes various deposits in one
washing cycle. Cleaning takes place
in two phases:
Phase Removal of Detergent Placement
1 Grease and limescale Liquid machine care product
or machine descaler in
powder form.
Appliance interior, e.g. bottle
hung in the cutlery basket or
powder in the interior.
39
en Cleaning and servicing
1
2
3
1
2
3
Phase Removal of Detergent Placement
2 Food remnants and deposits Machine cleaner Detergent dispenser
To ensure optimum cleaning performance, the programme doses the detergents independently of each another during the relevant cleaning
phase. Correct placement of the detergents is necessary here.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if advised to do so by the display. The indicator will go out after you have run
Machine Care. If your appliance does
not have a reminder function, we recommend performing Machine Care
every 2months.
RunningMachine Care
Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.
Notes
¡ Run the Machine Care programme
without any tableware in the dishwasher.
¡ Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡ Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indicator for Machine Care will go out
automatically.
¡ For optimum cleaning perform-
ance, ensure the correct placement of cleaners.
¡ Follow the safety instructions given
on the packagings of the machine
care products and machine cleaners.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Clean the filters.
3. Place the machine care product in
the appliance interior.
Only use machine care products
specially designed for dishwashers.
4. Pour the machine cleaner into the
detergent dispenser until it is filled
completely.
Do not place any additional machine cleaner in the appliance interior.
5. Press .
6. Press .
a Machine Care is run.
a Once the programme has ended,
the indicator for Machine Care
goes out.
Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
Micro filter
Fine filter
Coarse filter
40
Cleaning filters
1
2
1
2
1
2
Soiling in the dishwashing water may
block the filters.
1. After each wash check the filters
for residue.
2. Turn the coarse filter anticlockwise
and remove the filter system .
‒ Check that no foreign objects
fall into the sump.
3. Pull down the micro filter to re-
move.
Cleaning and servicing en
5. Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine filter.
6. Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into position.
7. Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
Make sure that the arrow markings
match up.
4. Press the locking catches to-
gether and lift the coarse filter out
.
Cleaning spray arms
Limescale and soiling in the dishwashing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
1. Unscrew the upper spray arms
and pull down to remove .
41
en Cleaning and servicing
2. Pull up the lower spray arm to re-
move.
3. Check the outlet nozzles on the
spray arms for blockages under
running water and remove any foreign bodies.
4. Insert the lower spray arm.
a The spray arm clicks into position.
5. Insert the upper spray arms and
screw firmly in place.
42
Troubleshooting en
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Appliance safety
Fault Cause troubleshooting
Appliance door does not
open at the end of the programme.
Automatic door opening is
not activated.
Door is not correctly adjusted.
Appliance door and door
seal are soiled.
Wrong screws used to adjust the door gap.
The safety device switches
off automatic door opening.
▶
Activate the automatic door opening.
→"Overview of basic settings",
Page34
▶
Adjust the appliance door as described in the installation instructions.
The door gap must be at least
70mm - 100mm.
▶
Clean the appliance door and door
seal with a damp cloth and a little
washing-up liquid.
▶
Use size 4X30 bolts to adjust the
door gap.
The bolts are included in the scope
of supply.
If you use bolts that are too long,
this can deactivate the function of
automatic door opening.
▶
Call "Customer Service."
→Page57
43
en Troubleshooting
Fault Cause troubleshooting
Appliance door opens too
wide at the end of the programme.
Door is not correctly adjusted.
▶
Adjust the appliance door as described in the installation instructions.
The door gap must be at least
70mm - 100mm.
Wrong screws used to adjust the door gap.
▶
Use size 4X30 bolts to adjust the
door gap.
The bolts are included in the scope
of supply.
If you use bolts that are too long,
this can deactivate the function of
automatic door opening.
Error code / Fault display / Signal
Fault Cause troubleshooting
E:21-60 will light up alternately.
E:30-00 will light up alternately.
E:31-00 will light up alternately.
E:34-00 will light up alternately.
E:32-00 will light up alternately or indicator for water
supply lights up.
Appliance has detected calcified heating element.
Water protection system is
activated.
Water protection system is
activated.
Water is continuously running into the appliance.
Supply hose is kinked.
Water tap is turned off.
Water tap is jammed or
furred up.
The filters in the water connection of the supply or
AquaStop hose are blocked.
1. Descale the appliance.
2. Operate the appliance with the Wa-
ter softening system.
1. Turn off the water tap.
2. Call "Customer Service"
→Page57.
1. Turn off the water tap.
2. Call "Customer Service"
→Page57.
1. Turn off the water tap.
2. Call "Customer Service"
→Page57.
▶
Install the supply hose without
kinks.
▶
Turn on the water tap.
▶
Turn on the water tap.
The flow rate must be at least 10 l/
min when the water supply is open.
1. Switch off the appliance.
2. Pull out the mains plug.
3. Turn off the water tap.
4. Unscrew the water connection.
5. Remove the filter from the supply
hose
44
Fault Cause troubleshooting
E:32-00 will light up alternately or indicator for water
supply lights up.
6. Clean the filter.
7. Re-insert the filter in the supply
hose.
8. Screw the water connection back
on.
9. Check the water connection for
leaks.
10. Restore the power supply.
11. Switch the appliance on.
E:92-40 will light up alternately.
E:61-03 will light up alternately. Water is not drained.
Filters are soiled or blocked.▶Clean the filters.
→"Cleaning filters", Page41
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
1. Reposition the wastewater hose
without kinks.
2. Remove residues.
▶
Check the connection to the siphon
and open if necessary.
▶
Secure the cover of the "Wastewater pump " →Page56 so it clicks
into position.
E:61-02 will light up alternately.
Wastewater pump is
blocked.
▶
Clean the wastewater pump.
→"Clean wastewater pump",
Page56
Cover of the wastewater
pump is loose
▶
Secure the cover of the "Wastewater pump " →Page56 so it clicks
into position.
E:90-01 will light up alternately.
Mains voltage is too low. This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and elec-
trical installation checked by an
electrician.
Troubleshooting en
45
en Troubleshooting
Fault Cause troubleshooting
A different error code appears in the display window.
E:01-00 to E:90-10
A technical fault is present. 1. Press .
2. Unplug the appliance or switch off
the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact "Customer Service"
→Page57 and give the er-
ror code.
Washing results
Fault Cause troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
Water collects in recesses of
the tableware or cutlery.
1. Add "Rinse aid" →Page27.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page27
▶
"Select a programme with drying,
e.g. intensive, strong or ECO programme." →Page18
Some option buttons decrease the
drying result, e.g varioSpeed.
▶
Position tableware at an angle
where possible.
46
The combined detergent
used has a poor drying performance.
1. Use rinse aid to improve drying per-
formance.
Troubleshooting en
Fault Cause troubleshooting
Tableware is not dry. 2. Use a different combined detergent
with a better drying performance.
Extra Dry not activated to im-
▶
Activate Extra Dry.
prove drying performance.
Tableware removed too
early or drying process not
yet ended.
Rinse aid used has a limited
drying performance.
1. Wait until the programme ends.
2. Only remove tableware 30minutes
after the programme has ended.
▶
Use a name-brand rinse aid.
Eco products may have limited ef-
fectiveness.
Appliance door does not
open automatically at the
end of the programme
▶
Adjust the appliance door as described in the installation instructions.
The door gap must be at least
70mm - 100mm.
Plastic tableware is not dry. Not a fault. As plastic does
▶
No remedial action possible.
not store heat so well, it also
does not dry as well.
Cutlery is not dry. Cutlery not arranged prop-
erly in the cutlery basket or
cutlery drawer.
Droplets can form on the cutlery contact points.
1. "Arrange cutlery individually where
possible." →Page31
2. Avoid points of contact.
Appliance interior still wet
after wash cycle.
Not a fault. The condensation drying principle causes
No action required.
water droplets in the tub –
they are indeed desirable
here. The moisture in the air
condenses on the inside
walls, runs off and is
pumped out.
Remnants of food on tableware.
Tableware is placed too
close together or basket is
overfilled.
1. Arrange tableware with sufficient
space in between.
The spray jets must reach the sur-
faces of the tableware.
2. Avoid points of contact.
Spray arm rotation is
blocked.
Spray arm nozzles are
▶
Arrange tableware so that it does
not obstruct spray arm rotation.
▶
Clean the "Spray arms" →Page41.
blocked.
47
en Troubleshooting
Fault Cause troubleshooting
Remnants of food on tableware.
Filters are soiled.
Filters are inserted incorrectly and/or not engaged.
Washing programme selected too weak.
▶
Clean the filters.
→"Cleaning filters", Page41
1. Insert the filters properly.
→"Filter system", Page40
2. Engage the filters.
▶
Select a more intensive washing
programme.
→"Programmes", Page18
Tableware has been precleaned too intensely. The
▶
Only remove large remnants of food
and do not prerinse tableware.
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
Top baskets on right and left
are not set to same height.
▶
Do not position tall narrow recept-
acles at too great an angle or in
corner areas.
▶
Set the top baskets on the left and
right to the same level.
→"Top basket", Page21
Detergent residue in the appliance
Lid of the detergent dispenser is blocked by items
of tableware parts and will
not open.
1. Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.
→"Arrange tableware", Page31
Items of tableware are blocking the
dispenser lid.
2. Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.
The lid of the detergent dispenser is blocked by the tab
▶
Position the tab in the detergent dis-
penser crosswise, not vertically.
and will not open.
Tabs are used in the quick
or short programme. Dissolving time of the tab is not at-
▶
Select a more intensive "Pro-
gramme" →Page18 or use
"Powder detergent" →Page28.
tained.
Washing effect and dissolving performance are re-
▶
Change your "detergent"
→Page28.
duced after a prolonged
storage time or detergent is
very lumpy.
48
Fault Cause troubleshooting
Water marks on plastic
parts.
Due to laws of physics
droplet formation on plastic
surfaces is unavoidable.
After drying water marks are
visible.
▶
Select a more intensive pro-
gramme.
→"Programmes", Page18
▶
Position tableware at an angle.
→"Arrange tableware", Page31
▶
Use rinse aid.
→"Rinse aid", Page27
▶
Set the water softening system
higher.
Wipeable or water-soluble
coatings are present inside
the appliance or on the door.
Detergent substances are
deposited there. These coatings cannot generally be removed with chemicals.
White coating is deposited in
the appliance interior.
▶
Change your "detergent"
→Page28.
▶
Clean the appliance mechanically.
1. Set the water softening system cor-
rectly.
In most cases you will need to in-
crease the setting.
2. Change your detergent if required.
▶
Screw the special salt dispenser
tight.
▶
Change your "detergent"
→Page28.
▶
Clean the appliance mechanically.
▶
Set the Water softening system to
the water hardness or add special
salt.
Stubborn white coatings are
present on tableware, inside
the appliance or the door.
Special salt dispenser is not
screwed tight.
Detergent substances are
deposited there. These coatings cannot generally be removed with chemicals.
The hardness range is set incorrectly or the water hardness is greater than 62°E
(8,9mmol/l).
3in1/organic/eco detergent
is not effective enough.
▶
Set the Water softening system to
the water hardness and use separ-
ate detergents (proprietary deter-
gent, special salt, rinse aid).
Too little detergent is being
used.
▶
Increase the amount of detergent
used or change "Detergent "
→Page28.
Washing programme selected too weak.
▶
Select a more intensive washing
programme.
→"Programmes", Page18
Tea residue or lipstick marks
on tableware.
Washing temperature is too
low.
▶
Select a programme with a higher
washing temperature.
→"Programmes", Page18
Troubleshooting en
49
en Troubleshooting
Fault Cause troubleshooting
Tea residue or lipstick marks
on tableware.
Too little detergent is being
used or is unsuitable.
▶
Use a suitable "Detergent "
→Page28 and follow the manufac-
turer's instructions for the amount
to be used.
Tableware has been precleaned too intensely. The
▶
Only remove large remnants of food
and do not prerinse tableware.
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Coloured coatings (blue, yellow, brown) that are difficult
or impossible to remove are
present inside the appliance
or on stainless steel tableware.
The formation of films is due
to substances contained in
vegetables (cabbage, celery,
potatoes, noodles, etc.) or
tap water (manganese).
▶
Clean the appliance.
You can remove deposits with
"Mechanical cleaning" →Page39
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.
The formation of films is due
to metal components on silver or aluminium tableware.
▶
Clean the appliance.
You can remove deposits with
"Mechanical cleaning" →Page39
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.
Coloured deposits (yellow,
orange, brown) that are easy
to remove are present inside
the appliance (mainly at the
bottom).
The formation of films is due
to ingredients of food remnants and tap water (limescale) "soaplike".
1. Check the setting of the water
softening system.
2. Add special salt.
→"Adding special salt", Page25
3. If you are using combined deter-
gents (tabs), activate the water
softening system.
Follow the information about deter-
gents.
→"Information on detergents",
Page29
Plastic parts inside the appliance are discoloured.
Plastic parts inside the appliance may become discoloured during the life of the
▶
Discolouration can come about and
will not impair functioning of the ap-
pliance.
dishwasher.
Plastic parts are discoloured.
Washing temperature is too
low.
▶
Select a programme with a higher
washing temperature.
→"Programmes", Page18
50
Fault Cause troubleshooting
Plastic parts are discoloured.
Tableware has been precleaned too intensely. The
▶
Only remove large remnants of food
and do not prerinse tableware.
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Removable streaks are
present on glasses, glassware with a metallic appearance and cutlery.
Amount of rinse aid to be
dispensed is set too high.
No rinse aid has been added.
Detergent residue is present
in the final rinse. Lid of the
detergent dispenser is
blocked by tableware items
and will not open fully.
▶
Set the rinse aid system to a lower
setting.
▶
→"Adding rinse aid", Page27
1. Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.
→"Arrange tableware", Page31
Items of tableware are blocking the
dispenser lid.
2. Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.
Tableware has been precleaned too intensely. The
▶
Only remove large remnants of food
and do not prerinse tableware.
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Irreversible clouding of
glassware.
Glasses are not dishwasherproof, only suitable for dishwashers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for
use in a dishwasher, i.e. long-term
wear or long-term changes must be
expected.
▶
Avoid a lengthy steam phase
(standing time after wash cycle
ends).
▶
Use a programme with a lower tem-
perature.
→"Programmes", Page18
▶
Set the softening system to the wa-
ter hardness.
▶
Use detergent with a glass protec-
tion component.
Troubleshooting en
51
en Troubleshooting
Fault Cause troubleshooting
Rust spots on cutlery. Cutlery is not sufficiently
▶
Use rust-resistant tableware.
rust-resistant. Knife blades
are often more severely affected.
Cutlery may also rust if
▶
Do not wash rusting items.
washed together with rusting items.
Salt content in washing water is too high.
1. Remove any spilled special salt
from the tub.
2. Screw the cap of the special salt
dispenser on tight.
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
Detergent dispenser was
damp when detergent was
▶
Check that the spray arms are not
blocked and can rotate freely.
▶
Only add detergent to a detergent
dispenser when dry.
added.
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for
rinse aid.
Rinse aid has been spilled.
Detergent or appliance care
▶
Immediately add rinse aid to the
dispenser.
→"Adding rinse aid", Page27
▶
Remove the rinse aid with a cloth.
▶
Change the brand of detergent.
product used causes excessive foaming.
Home Connect problem
Fault Cause troubleshooting
Connection to home network is not established.
WLAN on router is not active.
WLAN display is flashing. Connection to home net-
work is not available.
Home Connect cannot be
implemented correctly.
Home Connect set incorrectly.
Technical fault is present.
52
▶
Check the wireless network con-
nection of your router.
▶
Activate the wireless network con-
nection on your router.
▶
Please consult the documents sup-
plied for HomeConnect.
▶
Please consult the information
about support in the documents
supplied for HomeConnect.
Information on display panel
Fault Cause troubleshooting
Special salt refill indicator
lights up.
Insufficient special salt.
Sensor does not detect spe-
▶
Add "Special salt" →Page25.
▶
Do not use special salt tablets.
cial salt tablets.
Refill indicator for special
salt does not light up.
Refill indicator for rinse aid
lights up.
Water softening system is
switched off.
Insufficient rinse aid. 1. Add "Rinse aid" →Page27.
▶
Setting the water softening system
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page27
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
Display flashes. Appliance door is not closed
properly.
▶
Set the amount of rinse aid to be
dispensed.
▶
Close the appliance door.
‒ Arrange the tableware so
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
Malfunctions
Troubleshooting en
Fault Cause troubleshooting
Water is left in the appliance
at the end of the programme.
Filter system or area under
the filters is blocked.
Programme has not yet
ended.
1. Clean the "Filters" →Page41.
2. Clean the "Wastewater pump"
→Page56.
▶
Wait until the programme ends or
cancel the programme with Reset.
▶
→"Terminate programme",
Page33
Appliance cannot be
switched on or operated.
Software update is taking
place.
Appliance functions have
failed.
▶
Wait until the software update has
finished.
1. Pull out the mains plug or switch off
the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the power
supply.
4. Switch the appliance on.
Appliance does not start. The mains fuse has tripped.
▶
Check the relevant fuse.
53
en Troubleshooting
Fault Cause troubleshooting
Appliance does not start. Mains cable is not inserted. 1. Check whether the socket works.
2. Check whether the mains cable is
properly inserted in the socket and
on the rear of the appliance.
Appliance door is not closed
▶
Close the appliance door.
properly.
Programme starts automatically.
Appliance stops during the
programme or cuts out.
You did not wait until programme ended.
Appliance door is not closed
properly.
Power and/or water supply
has been interrupted.
Top basket is pressing
against inner door and preventing appliance door from
being closed securely.
▶
→"Terminate programme",
Page33
▶
Close the appliance door.
1. Check the power supply.
2. Check the water supply.
▶
Check whether the rear panel of the
appliance is being pressed in by a
socket or hose holder that has not
been removed.
▶
Arrange the tableware so that no
parts project beyond the basket
and prevent the appliance door
from closing properly.
Mechanical damage
Fault Cause troubleshooting
Appliance door cannot be
closed.
Lid on the detergent dispenser cannot be closed.
54
Door lock has been activated.
Door cannot be closed due
to installation method.
Detergent dispenser or lid
are blocked by sticky detergent residue.
▶
Close the appliance door with
greater force.
▶
Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
▶
Remove detergent residue.
Noise
Fault Cause troubleshooting
Filling valves making knocking noises.
Caused by the domestic installation. No appliance fault
present. Does not affect
functioning of the appliance.
Knocking or rattling noise. Spray arm is striking table-
ware.
With a small load the water
jets directly strike against
the tub.
Light items of tableware
move about during the wash
cycle.
▶
Can only be remedied in the do-
mestic installation.
▶
Arrange tableware so that the spray
arms do not strike tableware.
▶
Distribute the tableware evenly.
▶
Load the appliance with more table-
ware.
▶
Position light items of tableware se-
curely.
Troubleshooting en
55
en Transportation, storage and disposal
1
2
Clean wastewater pump
Large remnants of food or foreign
bodies can block the waste water
pump. As soon as the rinsing water
no longer drains properly, the waste
water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or fragments of glass may block the waste
water pump and cause injury.
▶
Remove any foreign bodies carefully.
1. Disconnect the appliance from the
power supply.
2. Remove the top and bottom bas-
ket.
3. Remove the filter system.
4. Scoop out any water.
Use a sponge if necessary.
5. Prise off the pump cover using a
spoon and grip it by the
crosspiece.
a The pump cover clicks into posi-
tion.
9. Install the filter system.
10.Insert the top and bottom basket.
Transportation, storage and disposal
Transportation, storage
and disposal
Transportation, storage and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
Removing the appliance
6. Lift the pump cover inwards at an
angle and remove.
7. Remove any remnants of food and
foreign bodies in the area of the
impeller.
8. Insert the pump cover and press
down .
56
1. Disconnect the appliance from the
power supply.
2. Turn off the water tap.
3. Detach the drainage connection.
4. Detach the drinking water connec-
tion.
5. Loosen any screws fastening the
appliance to cabinet parts.
6. Remove the base panel if fitted.
7. Pull the appliance out carefully,
along with the hose behind it.
Customer Service en
Protect appliance from frost
If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely.
▶
"Empty the appliance."
→Page57
Transporting the appliance
To avoid damage to the appliance,
empty it before transporting.
Note:Always transport the dishwasher upright to prevent residual
water getting into the machine's controls and damaging the appliance.
1. Remove tableware from the appli-
ance.
2. Secure loose parts.
3.
"Switch on appliance." →Page32
4. Select the programme with the
highest temperature.
→"Programmes", Page18
5.
"Start the programme." →Page33
6. To drain the appliance, terminate
the programme after approx.
4minutes.
→"Terminate programme",
Page33
7. "Switch off the appliance."
→Page33
8. Turn off the water tap.
9. To empty the residual water out of
the appliance, detach the supply
hose and let the water drain out.
Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the
appliance, thereby putting their lives
at risk.
▶
With redundant appliances, unplug
the power cord. Then cut through
the cord and damage the lock on
the appliance door beyond repair
so that the appliance door will no
longer close.
1. Unplug the appliance from the
mains.
2. Cut through the power cord.
3. Dispose of the appliance in an en-
vironmentally friendly manner.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the
framework for the return and recycling of used appliances as
applicable throughout the EU.
Customer Service
Customer Service
Customer Service
If you have any queries, are unable to
rectify faults on the appliance yourself or if your appliance needs to be
repaired, contact Customer Service.
You can solve many problems yourself by consulting the information on
troubleshooting in these instructions
or on our website. If this is not the
case, contact our after-sales service.
57
en Customer Service
We will always find an appropriate
solution and try to avoid unnecessary
visits being made by a Customer Service technician.
With any warranty claims, we will
make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired.
For safety reasons repairs to the appliance should only be carried out by
trained specialist staff. The warranty
claim becomes void if repairs or interventions have been carried out by
persons not authorised by us for that
purpose or if our appliances have
been fitted with spare, supplementary
or accessory parts that were not
genuine parts and then resulted in a
defect.
Function-relevant genuine spare parts
according to the corresponding Ecodesign Order can be obtained from
Customer Service for a period of at
least 10 years from the date on
which your appliance was placed on
the market within the European Economic Area.
Note:Under the terms of the manufacturer's warranty the use of Customer Service is free of charge.
Detailed information on the warranty
period and terms of warranty in your
country is available from our aftersales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (ENr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of
your appliance.
The contact details for Customer Service can be found in the enclosed
Customer Service directory or on our
website.
Product number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)
You can find the product number (ENr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's details and the Customer Service telephone number to find them again
quickly.
AQUA-STOP guarantee
In addition to warranty claims against
the seller under the purchase agreement and in addition to our manufacturer's warranty, we offer compensation under the following conditions.
¡ If our Aqua-Stop system is defect-
ive and causes water damage, we
will make good the damage for
private users. To ensure protection
from water damage, the appliance
must be connected to the power
supply.
¡ The liability guarantee is valid for
the service life of the appliance.
¡ A claim can only be made under
the guarantee if the appliance has
been correctly installed and connected with Aqua-Stop according
to our instructions; this also includes correctly fitting the AquaStop extension (genuine accessory). Our guarantee does not cover
defective supply lines or fittings up
to the Aqua-Stop connection on
the tap.
¡ If your appliance is fitted with
Aqua-Stop, you can in principle
leave your appliance unattended
during operation and the tap
turned on afterwards. The tap only
58
Technical specifications en
needs to be turned off if you are
away from home for a long period,
e.g. on holiday for several weeks.
Technical specifications
Technical specifications
Technical specifications
Facts and figures for your appliance
can be found here.
Weight Max.: 45kg
Voltage 220 - 240V, 50Hz or
60Hz
Power rating 2000 - 2400W
Fuse 10 - 16A
Power consumption Off mode/standby
mode: 0.50W
Left-on mode: 0.50W
Networked standby:
2.00W
Time in left-on mode:
0min
Time after which ap-
pliance is switched to
networked standby
mode: 10min
Complies with the
latest regulations (EU)
for energy labels and
ecodesign at the time
of placing on the mar-
ket.
Additional functions
and settings may in-
crease power con-
sumption and times.
Water pressure ¡ Min. 0.05MPa
(0.5bar)
¡ Max. 1MPa
(10bar)
Inlet rate Min. 10l/min
Water temperature Cold water.
Hot water max.: 60°C
Capacity 9place settings
More information about your model
can be found online at https://energylabel.bsh-group.com1. This web
address is linked to the official EU
EPREL product database. At the time
of printing its web address had not
yet been published. Please then follow the instructions on searching for
models. The model identifier is made
up of the characters before the slash
in the product number (E-Nr.) on the
rating plate. Alternatively you can
also find the model identifier in the
first line of the EU energy label.
Information regarding Free and Open Source Software
This product includes software components that are licensed by the
copyright holders as free software or
open source software.
The applicable licence information is
stored on your home appliance. You
can also access the applicable licence information via your Home
Connect App: "Profile -> Legal information -> Licence Information". You
can download the licence information
on the brand product website (search
for your appliance model on the
product website and check additional
documents). Alternatively, you can
send a request to ossrequest@bshg.com or to BSH Hausgeräte GmbH GmbH, Carl-Wery-Str.
34, D-81739 München, Germany.
The source code will be made available to you on request.
To file a request, please email to ossrequest@bshg.com or send a written
request to BSH Hausgeräte GmbH,
Carl-Wery-Str. 34, D-81739 München,
Germany.
1
Only applies to countries in the European Economic Area
59
en Technical specifications
Reference "OSSREQUEST"
The cost of performing your request
will be charged to you. This offer is
valid three years from the date of purchase or at least as long as we offer
support and spare parts for the respective appliance.
60
Thank you for buying a
Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare-parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service
Free and easy registration – also on mobile phones:
www.bosch-home.com/welcome
Looking for help?
You'll find it here.
Expert advice for your Bosch home appliances, help with problems
or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you:
www.bosch-home.com/service
Contact data of all countries are listed in the attached service directory.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY
www.bosch-home.com
*9001485003*
9001485003 (000507) 442 V5
en
Loading...