Bosch SHE44C07UC Installation manual
YOUR LIFE. OUR INSPIRATION.
Power
On/Off
Delay
Start
Hours
Top
Rack
Only
Cancel
Drain
Power
Scrub
Plus
Scrub
Wash
Regular
Wash
Delicate/
Econo
Quick
Wash
Rinse
& Hold
Refill
Rinse
Agent
Cycle Countdown
Dishwasher Installation Instructions
Instructions d’installation du lave-vaisselle
Instrucciones de instalación para lavavajillas
Use and Care Manual located on reverse side
Tourner le guide pour les instructions d’utilisation et d’entretien
Voltee el manual para encontrar las instrucciones de uso y cuidado
9000089901 (8506)
Table of Contents / Important Instructions
Table of Contents
Read these Installation Instructions completely and follow them carefully.
IMPORTANT INSTRUCTIONS ............................... 1
Tools Needed ......................................................... 2
Materials Needed ................................................... 2
Materials Supplied ................................................. 3
Enclosure Preparation ............................................ 4
Electrical Preparation ............................................. 5
Plumbing Preparation .......................................... 6-7
Dishwasher Preparation ...................................... 7-8
Door Panel Installation ........................................... 9
Placing the Dishwasher ........................................ 10
Securing the Dishwasher...................................... 10
Drain Hose Connection......................................... 11
Hot Water Connection ........................................... 12
Electrical Connection .......................................13-14
Door Tension Adjustment...................................... 14
Base and Toe Panel..........................................14-15
Final Instructions ................................................. 15
Customer Service ................................................ 16
Important Safety Instructions
WARNING
To avoid possible injury or property damage,
OBSERVE ALL WARNINGS AND CAUTIONS.
These instructions are intended for use by
qualified installers only.
The dishwasher must be installed by a qualified
service technician.
• In addition to these instructions, the dishwasher
shall be installed to meet all electrical and
plumbing codes and ordinances (both national and
local).
Read these installation instructions completely
and follow them carefully. They will save you time
and effort and help to ensure safety and optimum
dishwasher performance.
If the dishwasher is installed in a location that
experiences freezing temperatures (e.g., in a
holiday home), you must drain all the water
from the dishwasher’s interior. Water system
ruptures that occur as a result of freezing are
not covered by warranty.
IMPORTANT
• The dishwasher drain hose must be installed
with a portion of it at least 20” (508mm) off the
cabinet floor; otherwise the dishwasher may not
drain properly.
• This dishwasher is intended for residential use
only, and should not be used in commercial food
service establishments.
• NEW INSTALLATION - If the dishwasher is a
new installation, most of the work must be done
before the dishwasher is moved into place.
• REPLACEMENT - If the dishwasher is replacing
another dishwasher, check the existing
dishwasher connections for compatibility with
the new dishwasher, and replace parts as
necessary.
• This appliance has been found to be in
compliance with CAN/CSA-C22.2 No. 167/UL
749. It is the responsibility of the owner and the
installer to determine if additional requirements
and standards apply in specific installations.
Inspect the Dishwasher
After unpacking the dishwasher and prior to
installation, thoroughly inspect the dishwasher for
possible freight or cosmetic damage. Report any
damage immediately. Cosmetic defects must be
reported within 30 days of installation.
NOTE: Do not discard any bags or items that come
with the original package until after the entire
installation has been completed.
1
TOOLS NEEDED
Tools and Materials Needed
Hammer Hole Saw
Tape Measure
Wire Cutter
Slot Screwdriver
Wire Stripper
Phillips Screwdriver
Drill
MATERIALS NEEDED
(Additional materials may be required to comply with local codes.)
Pipe Wrench
Adjustable Wrench
T-20 Screwdriver
Level
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper
conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher
supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit your water supply
line (copper tubing/compression fitting, or braided hose) on the other leg.
Teflon tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
2
Materials Supplied
MATERIALS SUPPLIED
Accessory Parts Supplied
Accessory parts for your dishwasher come in one or more plastic bags that are outlined below.
NOTE: Make sure you save all the bags until you have completed your installation.
NOTE: Always use the supplied or recommended hardware.
Manual Set Bag
A Manual Set Bag is provided with each dishwasher and
includes:
A Use & Care Instructions and Installation
Instructions (both manuals may be included
in a single “flip-style” book
B Quick Reference Guide (select models)
C Extra Tall Item Sprinkler
D SHI and SHV Installation Template (SHI and SHV
models only)
E White Cotton Insulation Strip (SHY66C, SHX99A,
SHE66C, SHE99C and SHX57C models only)
Dishwasher Installation Kit
A Dishwasher Installation Kit is provided with each
dishwasher and includes:
F Toe Panel Screws (2 black machine screws)
Note: These screws are included, but not used on
models with the Toe Panel Installation Kit.
G Counter Top Mounting Brackets (2 “L” shaped metal
brackets)
H Mounting Bracket Screws (2 silver wood screws)
I Rubber Drain Hose Adaptor (1 black rubber tube)
J Hose Clamps ( 1 silver spring clamp to use to
attach the rubber adaptor to the Drain Hose and 1
gold screw clamp to attach the rubber adaptor to
the plumbing)
K Wire Nuts (3 for electrical connection)
L Electrical Junction Box Screws (2 silver
machine screws)
M Leg Leveler Locking Screws (2 gold coarse
threaded screws)
A
B
C
F
G
H
I
J
D
E
K
L
M
SHI/SHV Door Panel Installation Kit
A Door Panel Installation Kit is provided with select
dishwashers that use a custom wood door panel and
includes:
N Plastic Caps (2)
O Spring Tension Screws (2 larger silver machine
screws used to adjust the door springs to accommodate doors of different weights)
P Door Mounting Brackets (2 gold metal brackets
and 2 white plastic brackets used to mount the
custom door)
Q Door Mounting Bracket Screws (8 silver wood
screws)
R Door Mounting Screws (2 long silver screws used
to attach the door)
Toe Panel Installation Kit
A Toe Panel Installation Kit is provided on models
SHY66C, SHX99A, SHE66C, SHE99C and SHX57C.
These models have a special noise reducing Toe Panel
with the following mounting hardware:
S Toe Panel Screws (2 black screws used to attach
the metal Toe Panel)
T Black Plastic Base Access Panel Screws (2 long
silver screws used to attach the Black plastic
Base Access Panel to the dishwasher.
N
O
P
Q
S T
R
3
Enclosure Preparation
Check
clearance
between
dishwasher
door and wall
34"
(864mm)
minimum
23-5/8" – 24-1/4" (600–616 mm)
Figure 1
Countertop
23-9/16"
(598mm)
90 90
WARNING
Electrical Shock Hazard
To avoid electrical shock, make sure the water
supply and electrical supply are shut off before
installation or service.
ENCLOSURE PREPARATION
NOTE: This dishwasher is designed to be enclosed on the
top and both sides by standard residential kitchen
cabinetry.
Select a location as close to the sink as possible for
easy access to water supply and drain lines.
For proper dishwasher operation and appearance, ensure
that the enclosure is square and has the dimensions
shown in Figure 1.
If the dishwasher is to be installed in a corner, make sure
that there is adequate clearance to open the door. See
Figure 2.
WARNING
Electrical Shock/Fire Hazard
To avoid electric shock or fire, do not allow the
electrical and water supply lines to touch.
Separate channels are provided under the
dishwasher (see page 10).
Figure 2
3-1/2"
(89mm)
Figure 3
1-5/16"
(33mm)
If the enclosure requires openings for the electrical supply
cable, hot water supply line, and dishwasher drain hose,
place them within the dimensions shown by the shaded
area of Figure 3 to avoid interference with the dishwasher
frame or other components. Make the openings for the
electrical supply cable and hot water supply line 1”
(25.4mm) diameter. Make the opening for the dishwasher
drain hose 1-1/4” (32mm) diameter. If the openings are
made through wood, sand them smooth. If the openings
are made through metal, make them large enough to
accommodate grommets or other protective sheaths with
inside diameters of 1” (25.4mm) for the electrical supply
cable and the hot water supply line, and 1-1/4” (32mm) for
the dishwasher drain hose.
4
Loading...