Bosch RF3401E Installation Instructions Manual
RF3401E
ENEN
ENEN
EN
Installation InstructionsInstallation Instructions
Installation InstructionsInstallation Instructions
Installation Instructions
Wireless (RF) Point
Transmitter
Bosch Security Systems, Inc. | 02/12 | F01U035628-06
EN | EN |
EN | EN |
EN | 2
RF3401E RF3401E
RF3401E RF3401E
RF3401E | Installation Instructions | 1.0 Overview
1.01.0
1.01.0
1.0
OvOv
OvOv
Ov
erer
erer
er
vievie
vievie
vie
ww
ww
w
The RF3401E Point Transmitter is a magnetic and
dry contact wireless transmitter used for
monitoring doors, windows, or other dry contact
devices.
This device is equipped with an internal reed
contact for use with an external magnet assembly
and a cover/wall tamper switch. The point
transmitter accepts a dual EOL resistor
supervised dry contact input from an external
device.
Supervision is provided by transmitting a signal to
the receiver every 13 min. if there is no other
activity. All transmissions from the RF3401E send
battery status information.
Table 1: SpecificationsTable 1: Specifications
Table 1: SpecificationsTable 1: Specifications
Table 1: Specifications
Dimensions
(H x W x D)
Transmitter:
76.5 mm x 35 mm x 19 mm
(3 in. x 1.38 in. x 0.75 in. )
Mounting Plate:
76.5 mm x 35 mm x 3.2 mm
(3 in. x 1.38 in. x 0.13 in. )
Magnet:
80 mm x 14 mm x 12 mm
(3.15 in. x 0.55 in. x 0.47 in.)
Operating
Temperature
-30C to +65C (-22F to +149F)
Frequency
Band
433.42 MHz
Maximum RF
Power
< 1 0 mW
Operating
Voltage
Supplied by a 3 V DC lithium battery
Battery Life
Minimum of five year s under normal
operating conditions with the
recommended battery types.
Recommended
Battery Types
Duracell DL 123A,
E nerg i zer EL 123AP, or
Panasonic CR 123A
Compatible
Receivers
R F3212E or RF3222E
Compliance
CE 0165. This point tran smitter
complies with EN 300683,
EN 300220, and 89/336/EEC.
2.02.0
2.02.0
2.0
SpecificationsSpecifications
SpecificationsSpecifications
Specifications
3.03.0
3.03.0
3.0
MountingMounting
MountingMounting
Mounting
3.13.1
3.13.1
3.1
Mounting ConsiderationsMounting Considerations
Mounting ConsiderationsMounting Considerations
Mounting Considerations
• The maximum range of the point transmitter, in
open air, is approximately 300 m (984 ft). In
normal residential or commercial applications,
it is recommended the point transmitter be
kept within 100 m (328 in.) of the receiver to
which it is assigned.
• Mounting the point transmitter on metal
surfaces can reduce its RF range. Mounting the
point transmitter on ferrous metal (iron or
steel) surfaces can affect the operation of the
internal magnetic contact.
• Mount the point transmitter on the door/
window frame and the magnet assembly on the
moving portion. Mount the magnet assembly
within 15 mm (0.59 in.) of the point
transmitter and in an acceptable orientation as
shown in Figure 1.
FF
FF
F
igurigur
igurigur
igur
e 1: Mounting Considere 1: Mounting Consider
e 1: Mounting Considere 1: Mounting Consider
e 1: Mounting Consider
aa
aa
a
tions (shotions (sho
tions (shotions (sho
tions (sho
wnwn
wnwn
wn
without mouting plate or spacer)without mouting plate or spacer)
without mouting plate or spacer)without mouting plate or spacer)
without mouting plate or spacer)
1 - Acceptable
2 - Not acceptable
1
2
Loading...