Bosch NDN-498V03-21P Specsheet
Video | NDN-498 FlexiDome2X Day/Night IP Cameras
NDN-498 FlexiDome2X Day/Night IP
Cameras
www.boschsecurity.com
u 1/3-inch Day/Night CCD with progressive scan
u 20-bit image processing technology
FlexiDome2X Day/Night IP cameras are progressive
scan CCD cameras in a compact, high-impact rated,
vandal-resistant housing.
Equipped with 20-bit DSP with 2X‑dynamic, they have
a wide dynamic range for sharper, more detailed
images with outstanding color reproduction.
They can quad-stream video simultaneously — on two
H.264 streams, an I-frame recording stream, and an MJPEG stream. Features such as multicasting, internet
streaming and iSCSI recording are fully supported.
FlexiDome2X IP cameras have built-in video motion
detection and additional processing power for video
content analysis systems.
Supported by the award-winning Dinion2X digital
imaging technology, they provide a proven,
dependable solution for many security and surveillance
requirements, day or night.
Functions
Progressive scan
To capture sharp images, even in busy scenes with
high motion content, the Dinion camera uses
progressive scan technology.
u Wide Dynamic Range, 2X‑dynamic engine and
SmartBLC
u Quad streaming
u Flexible recording options
Superior image quality
With a 1/3-inch CCD and Bosch’s advanced digital
signal processing, the FlexiDome2X Day/Night IP
camera provides outstanding image quality in virtually
all situations. The highly accurate 20-bit digital signal
is automatically processed to reveal every detail of the
image in both the high and low-light areas of the scene
simultaneously.
20-bit Image Processing
The highly accurate digital signal processing optimally
captures the detail in both bright highlights and deep
shadows simultaneously. By combining 20-bit image
processing and wide dynamic range, the FlexiDome2X
maximizes the information visible in the picture even
with strong backlight.
Wide Dynamic Range
The superior wide dynamic range performance for all
lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC
Using 2X-Dynamic technology, pixel-by-pixel analysis
provides the user with the most detailed information.
Turn on SmartBLC to automatically compensate the
image without the need for complicated set-up or
| NDN-498 FlexiDome2X Day/Night IP Cameras
2
without compromising dynamic range. Features such
as Autoblack and Sharpness further improve the
details in a scene, pixel by pixel.
Programmable Modes
Six independent, pre-programmed operating modes
support typical applications, but are fully
programmable for individual situations.
Day/Night switching
In night mode, the camera enhances low light viewing
by switching the IR (infrared) filter out of the optical
path and providing a monochrome image. The camera
can switch from color to monochrome mode
automatically by sensing the illumination level,
manually via the alarm input, or remotely via a web
browser. An internal, through-the-lens IR detector
enhances monochrome mode stability by preventing
the camera from returning to color mode when IRillumination is dominant.
Privacy masking
Four different privacy zones allow specific parts of a
scene to be blocked. A mask for any part of the scene
can be pre-programmed.
Default Shutter
The default shutter speed captures fast moving
objects when sufficient light is available. When light
levels fall and other adjustments have been exhausted,
the shutter speed reverts to a standard setting to
maintain sensitivity.
SensUp Dynamic
By increasing the integration time up to 10 times on
the CCD, the effective sensitivity is dramatically
enhanced. This is especially useful when relying only
on moonlight for illumination.
Efficient bandwidth and storage management
The cameras use H.264 (Main Profile) compression,
bandwidth throttling, and multicasting capabilities to
manage bandwidth and storage requirements
efficiently, while delivering high image quality and
resolution.
Bosch's innovative Quad-streaming feature enables the
FlexiDome2X IP to deliver three H.264 streams (two
4CIF streams and an I‑frame only stream) together
with an M‑JPEG stream. These four streams facilitate
bandwidth-efficient viewing and recording options as
well as integration with third-party video management
systems.
FlexiDome2X IP cameras offer unparalleled recording
options. Attached to the network, they can use iSCSI
targets directly without any additional recording
software. The recording capabilities of the system can
be further enhanced by using the Bosch Video
Recording Manager.
The camera also supports local recording on a
microSD card. This can be used for local alarm
recording or for Automatic Network Replenishment
(ANR) to improve the overall reliability of video
recording.
Standard intelligence
With built-in video content analysis, the camera
reinforces the Intelligence-at-the-Edge concept where
edge devices become increasingly intelligent. The
MOTION+ video motion analysis system, which is built
into all camera versions, is the perfect solution for
applications where basic video content analysis
features are required. This motion analysis algorithm is
based on pixel change and includes object size
filtering capabilities and sophisticated tamperdetection capabilities.
Hardware enhanced
The advanced Intelligent Video Analysis (IVA) option
bases the IVA algorithm on digital imaging technology
that uses multi-level image analysis of pixels, texture,
and object direction.
ONVIF conformance
The camera conforms to the ONVIF (Open Network
Video Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. ONVIF conformant devices
are able to exchange live video, audio, metadata and
control information. They are automatically discovered
and connected to network applications such as video
management systems.
Tough design
The cast-aluminum housing, polycarbonate dome, and
hardened inner liner can withstand the equivalent of
55 kg (120 lbs) of force. The enclosure contains the
full-featured camera and integral varifocal lens. Ideal
for outdoor use, the cameras are protected against
water and dust to IP 66 (NEMA‑4X) standards. The
camera enclosure provides the extra protection
necessary for applications such as schools, banks,
prisons, parking garages, retail and industrial
buildings.
Installation is quick and easy, as the camera comes
completely assembled and ready to use. Using the
proprietary pan/tilt/rotation mechanism, installers can
select the exact field of view. Mounting options are
numerous, including surface, wall, corner and
suspended ceiling. The compact, sleek design and
virtually flush-mount appearance complements any
decor.
Unsurpassed flexibility
There are many ways to access the camera’s video: on
a PC using a web browser, with the Bosch Video
Management System, or with the Bosch Video Client.
The camera is also ideal for use with a
Divar 700 Series digital video recorder. By routing a
video stream to a Bosch video decoder, you can also
present the video with ultimate clarity on an analog
monitor.
Cost effective, simple installation
Three power options, PoE (Power-over-Ethernet),
24 VAC and 12 VDC are available. Using PoE makes
installation easier and more cost-effective, as cameras
| NDN-498 FlexiDome2X Day/Night IP Cameras
3
do not require a local power source. To increase
system reliability, the camera can be simultaneously
connected to both PoE and 12 VDC/24 VAC supplies.
Additionally, uninterruptible power supplies (UPS) can
be used, which will allow continuous operation, even
during a power failure.
For trouble free network cabling, the cameras support
Auto-MDIX.
FlexiDome2X IP cameras have a service mode for easy
installation using the control buttons and an analog
video output on the camera as an alternative to
configuration over IP. The service mode is simply
activated by pressing a button on the camera. This
routes the video to the analog output, bypassing the IP
video output. The On-Screen Display (OSD) simplifies
back focus adjustment and network configuration,
minimizing installation and support costs. The Lens
Wizard automatically detects the lens type and helps
focus the lens at the maximum opening to maintain
proper focus.
Easy Upgrade
Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.
Access Security
Various security levels are available for accessing the
network, the camera, and the data channels. As well
as password protection with three levels, 802.1x
authentication using a RADIUS is supported. To secure
Web browser access use HTTPS with a SSL certificate
stored in the camera. For total data protection, the
video and audio communication channels can be
independently AES encrypted with 128‑bit keys by
installing the optional Encryption Site License.
Typical applications
• Prisons and correctional facilities
• Traffic monitoring (air, land and sea)
• Hotels, bars and nightclubs
• Commercial and government buildings
• City surveillance and safety
• Border control
Certifications and approvals
Electro Magnetic Compatibility
Region Certification
Europe CE Declaration of Conformity
USA FCC + UL
Installation/configuration notes
Ordering chart
1 N Network camera
2 D Dome (FlexiDome fixed dome)
3 N Day/Night
4 498 Dinion2X performance
5 V Varifocal lens, auto iris
6 03 2.8 to 10 mm F1.2
06 6 to 50 mm F1.6
09 9 to 22 mm F1.4
7 1 PAL 50 Hz
2 NTSC 60 Hz
8 1 Motion+
2I IVA enabled
9 P PoE
10 Flush mount (blank)
S Surface mount
Flush Mounting
Emission EN55022 Class B
EN61000-3-2
EN61000-3-3
CFR. 47 FCC Part 15: class B
Immunity EN50130-4 (PoE, +12 VDC)
EN55024 (24 VAC)
EN50121-4
Safety EN60950-1
UL60950-1 (2nd edition)
CAN/CSA-C 22.2 No. 60950-1
Vibration As per IEC60068-2-6 (5 m/s2, operational)
Loading...