Bosch NCN-90022-F1 Specsheet
Video | FLEXIDOME IP corner 9000 MP
FLEXIDOME IP corner 9000 MP
www.boschsecurity.com
u Corner-mount, no-grip design for maximum safety
u 1.5 MP resolution for sharp images
u Views an entire small room, including directly
beneath
The FLEXIDOME corner 9000 MP is a vandal-resistant,
corner-mount camera featuring a no-grip, anchor-free
design. The high resolution 1440 x 1080p images and
the integrated infrared illumination allow 24/7
effective professional networked surveillance in high
risk, vandal-prone applications under any ambient
lighting conditions, even completely dark rooms.
The ultra-wide lens enables the camera to view the
entirety of a small room, including the floor beneath
the camera. The camera is impossible to grip or hang
from, providing maximum safety for applications such
as waiting rooms, elevators and psychiatric care
rooms.
System overview
Corner-mount, vandal-resistant design
The innovative design allows a perfectly flush fit into
the corner of a room that protects against even the
most brutal attempt to destroy, detach or disable the
camera. The sharp 45º angle hides all wiring and
delivers complete coverage of a 4.5 x 4.5 m
(15 x 15 ft) room, including below the camera itself.
The camera has no anchor points for maximum safety
in environments with at-risk individuals.
u 940 nm illuminator for covert night vision to 9 m
(30 ft)
u IP65 water resistance
Infrared illumination
The camera harnesses the power of infrared
illumination to deliver outstanding images day or night.
Infrared-emitting LEDs achieve covert, effective night
vision for the most advanced level of night vision
performance available today. With the intensityadjustable infrared LEDs, foreground hotspots and
underexposed backgrounds are eliminated.
True day/night switching
The camera incorporates mechanical filter technology
for vivid daytime color and exceptional night-time
imaging under infrared illumination while maintaining
sharp focus under all lighting conditions. The camera
also features outstanding spectral response in the
near infrared field for excellent active-infrared night
vision.
iDNR reduces bandwidth and storage requirements
The camera uses intelligent Dynamic Noise Reduction
(iDNR) which actively analyzes the contents of a scene
and reduces noise artifacts accordingly.
The low-noise image and the efficient H.264
compression technology provide clear images while
reducing bandwidth and storage by up to 30%
compared to other cameras. This results in reducedbandwidth streams that still retain a high image
| FLEXIDOME IP corner 9000 MP
2
quality and smooth motion. The camera provides the
most usable image possible by cleverly optimizing the
detail-to-bandwidth ratio.
Area-based encoding is another feature which reduces
bandwidth. Compression parameters for up to eight
user-definable regions can be set. This allows
uninteresting regions to be highly compressed, leaving
more bandwidth for important parts of the scene.
The average typical optimized bandwidth (for firmware
5.8) in bits/s for various image rates is shown in the
table:
IPS 1080p VGA
30 1200 600
15 955 478
7.5 711 355
5 568 284
3 388 194
1440 x 1080p resolution with multiple streams
The camera has a 1440 x 1080p resolution at
30 images per second (ips). The innovative multistreaming feature delivers various H.264 streams
together with an M‑JPEG stream. These streams
facilitate bandwidth-efficient viewing and recording as
well as integration with third-party video management
systems.
Regions of interest and e-PTZ
Two Regions of Interest (ROI) can be user defined.
The remote electronic pan, tilt and zoom (e-PTZ)
controls allow you to select specific areas of the
parent image. These regions produce separate streams
for remote viewing and recording. These streams,
together with the main stream, allow the operator to
separately monitor the most interesting part of a
scene while still retaining situational awareness.
Easy installation
No focus or pan/tilt adjustments are required as the
camera, with its wide angle lens, provides complete
coverage of a 4.5 x 4.5 m (15 x 15 ft) room.
Power for the camera can be supplied via a Powerover-Ethernet (IEEE 802.3af) compliant network cable
connection. With this configuration, only a single cable
connection is required to view, power, and control the
camera. Using PoE makes installation easier and more
cost-effective, as cameras do not require a local power
source.
The camera can also be supplied with power from
+12 VDC or 24 VAC power supplies. To increase
system reliability, the camera can be simultaneously
connected to both PoE and +12 VDC/24 VAC supplies.
Additionally, uninterruptible power supplies (UPS) can
be used, which will allow continuous operation, even
during a power failure. For trouble free network
cabling, the cameras support Auto-MDIX.
Two-way audio and audio alarm
Two-way audio allows the operator to communicate
via an external audio line input and output. Audio
detection can be used to generate an alarm if needed.
Tamper and motion detection
A wide range of configuration options is available for
alarms signaling camera tampering. A built-in algorithm
for detecting movement in the video can also be used
for alarm signaling.
Edge recording
The internal MicroSD card slot supports up to 2 TB
(SDXC) of storage capacity. A microSD card can be
used for local alarm recording. Pre-alarm recording in
RAM reduces recording bandwidth on the network, or
— if microSD card recording is used — extends the
effective life of the storage medium.
Cloud-based facilities
The camera supports time-based or alarm-based JPEG
posting to four different accounts. These accounts can
address FTP servers or cloud-based storage facilities
(for example, dropbox). Video clips or JPEG images
can also be exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS
notification so you are always aware of abnormal
events.
Access Security
Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels
can be independently AES encrypted with 128-bit keys
by installing the optional encryption site license.
Complete viewing software
There are many ways to access the camera’s video
features: using a web browser, with the supplied
Bosch Video Client, or with the iPad App.
The Bosch Video Client PC surveillance software offers
a user-friendly interface to support easy installation
and configuration, and is supplied completely free-ofcharge. It provides easy live viewing of multiple
cameras, playback, forensic search and export.
Video security App
The Bosch Video Security iPad App has been
developed to fully utilize our Dynamic Transcoding
features and enable Anywhere access to HD
surveillance images, even over low-bandwidth
connections. The App, together with the separately
available Bosch transcoder, is configured to give you
complete control of your camera.
System integration
Bosch IP standard definition and high definition
cameras, encoders and analytics work seamlessly with
a wide range of security software and recording
solutions from Bosch and other industry providers.
Through ONVIF conformance, the open availability of
Bosch video software development kits and a team
Loading...