Bosch NCN-90022-F1 User Manual
Camera Browser Interface
FLEXIDOME corner 9000 MP
en Software manual
Camera Browser Interface Table of Contents | en 3
Table of Contents
1 Browser connection 11
1.1 System requirements 11
1.2 Establishing the connection 12
1.2.1 Password protection in camera 12
1.3 Protected network 12
2System Overview 13
2.1 Livepage 13
2.2 Recordings 13
2.3 Settings 13
3 Operation via the browser 14
3.1 Livepage 14
3.1.1 Image selection 14
3.1.2 Status icons 15
3.1.3 Cameras with PTZ control 16
3.1.4 View Control ROI 17
3.1.5 Cameras with alarm I/O 18
3.1.6 System Log / Event Log 19
3.1.7 Saving snapshots 19
3.1.8 Recording video sequences 19
3.1.9 Running recording program 20
3.1.10 Audio communication 20
3.1.11 Processor load 20
3.2 Playback page 21
3.2.1 Selecting recordings for playback 21
3.2.2 Exporting tracks 22
3.2.3 Searching for tracks 22
3.2.4 Controlling playback 23
4 Settings Overview 25
4.1 Configuration Menu 25
4.2 Settings 26
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
4 en | Table of Contents Camera Browser Interface
5 Basic Mode 27
5.1 Device Access 27
5.1.1 Naming 27
5.1.2 Password 27
5.2 Date/Time 29
5.2.1 Device date, time and zone 29
5.2.2 Time server IP address 29
5.2.3 Time server type 29
5.3 Network 30
5.4 Encoder 31
5.5 Audio 31
5.6 Recording 31
5.7 System Overview 31
6 Advanced General Settings 32
6.1 Identification 32
6.1.1 Naming 32
6.1.2 ID 32
6.1.3 Initiator extension 32
6.2 Password 33
6.2.1 Password 33
6.2.2 Confirm password 33
6.3 Date/Time 34
6.3.1 Date format 34
6.3.2 Device date / Device time 34
6.3.3 Device time zone 34
6.3.4 Daylight saving time 34
6.3.5 Time server IP address 35
6.3.6 Time server type 35
6.4 Display Stamping 36
6.4.1 Camera name stamping 36
6.4.2 Time stamping 36
6.4.3 Display milliseconds 36
6.4.4 Alarm mode stamping 36
6.4.5 Alarm message 37
6.4.6 Video watermarking 37
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Table of Contents | en 5
7 Web Interface 38
7.1 Appearance 38
7.1.1 Website language 38
7.1.2 Company logo 38
7.1.3 Device logo 38
7.1.4 Show VCA metadata 38
7.1.5 Show overlay icons 38
7.1.6 Select Video player 39
7.1.7 JPEG size, interval and quality 39
7.2 LIVEPAGE Functions 40
7.2.1 Transmit audio 40
7.2.2 Lease time [s] 40
7.2.3 Show alarm inputs 40
7.2.4 Show alarm outputs 40
7.2.5 Show event log 40
7.2.6 Show system log 41
7.2.7 Allow snapshots 41
7.2.8 Allow local recording 41
7.2.9 I-frames-only stream 41
7.2.10 Path for JPEG and video files 41
7.3 Logging 42
7.3.1 Save event log 42
7.3.2 Save system log 42
8Camera 43
8.1 Installer Menu 43
8.1.1 Base frame rate 43
8.1.2 Camera LED 43
8.1.3 Mirror image 43
8.1.4 Flip image 43
8.1.5 Reboot device 43
8.1.6 Factory defaults 43
8.2 Picture Settings — User Mode 44
8.2.1 Current mode 44
8.2.2 Mode ID 44
8.2.3 Copy mode to 44
8.2.4 Restore Mode Defaults 44
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
6 en | Table of Contents Camera Browser Interface
8.3 Picture Settings — Color 46
8.3.1 White balance 46
8.4 Picture Settings — ALC 47
8.4.1 Exposure/frame rate 47
8.4.2 Day/night 47
8.5 Picture Settings — Enhance 49
8.5.1 Sharpness level 49
8.5.2 Backlight compensation 49
8.5.3 Contrast enhancement 49
8.5.4 Intelligent DNR 49
8.5.5 Temporal noise filtering 49
8.5.6 Spatial noise filtering 49
8.6 Encoder Settings 50
8.7 Privacy Masks 51
8.8 Audio 51
8.9 Pixel Counter 51
9 Encoder Settings 52
9.1 Encoder Profile 53
9.1.1 Pre-defined profiles 53
9.1.2 Changing a profile 53
9.1.3 Profile name 54
9.1.4 Target bit rate 54
9.1.5 Maximum bit rate 54
9.1.6 Encoding interval 54
9.1.7 Standard definition video resolution 54
9.1.8 Expert Settings 54
9.1.9 Default 56
9.2 Encoder Streams 57
9.2.1 H.264 settings 57
9.2.2 JPEG stream 58
9.3 Encoder Regions 59
9.3.1 Regions 59
10 Recording 60
10.1 Storage Management 61
10.1.1 Device manager 61
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Table of Contents | en 7
10.1.2 Recording media 61
10.1.3 Activating and configuring storage media 63
10.1.4 Formatting storage media 63
10.1.5 Deactivating storage media 63
10.2 Recording Profiles 65
10.2.1 Recording track selection 66
10.2.2 Standard recording 66
10.2.3 Alarm recording 67
10.3 Maximum Retention Time 67
10.4 Recording Scheduler 68
10.4.1 Weekdays 68
10.4.2 Holidays 68
10.4.3 Profile names 69
10.4.4 Activate recording 69
10.4.5 Recording status 69
10.5 Recording Status 70
11 Alarm 71
11.1 Alarm Connections 71
11.1.1 Connect on alarm 71
11.1.2 Number of destination IP address 71
11.1.3 Destination IP address 71
11.1.4 Destination password 71
11.1.5 Video transmission 72
11.1.6 Stream 72
11.1.7 Remote port 72
11.1.8 Video output 72
11.1.9 Decoder 72
11.1.10 SSL encryption 73
11.1.11 Auto-connect 73
11.1.12 Audio 73
11.2 Video Content Analyses (VCA) 74
11.3 Audio Alarm 75
11.3.1 Audio alarm 75
11.3.2 Name 75
11.3.3 Signal Ranges 75
11.3.4 Threshold 75
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
8 en | Table of Contents Camera Browser Interface
11.3.5 Sensitivity 75
11.4 Alarm E-Mail 76
11.4.1 Send alarm e-mail 76
11.4.2 Mail server IP address 76
11.4.3 SMTP user name 76
11.4.4 SMTP password 76
11.4.5 Format 76
11.4.6 Image size 76
11.4.7 Attach JPEG from camera 77
11.4.8 Destination address 77
11.4.9 Sender address 77
11.4.10 Test e-mail 77
11.5 Alarm Task Editor 78
12 Setting up VCA 79
12.1 VCA - Silent VCA 79
12.2 VCA - Profiles 80
12.2.1 Aggregation time [s] 80
12.2.2 Analysis type 80
12.2.3 Motion detector 81
12.2.4 Tamper detection 82
12.3 VCA - Scheduled 86
12.3.1 Weekdays 86
12.3.2 Holidays 86
12.4 VCA - Event triggered 88
12.4.1 Trigger 88
12.4.2 Trigger active 88
12.4.3 Trigger inactive 88
12.4.4 Delay [s] 88
13 Interfaces 89
13.1 Alarm input 89
13.1.1 Name 89
13.2 Alarm Output 89
13.2.1 Idle state 89
13.2.2 Operating mode 89
13.2.3 Output follows 89
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Table of Contents | en 9
13.2.4 Output name 89
13.2.5 Trigger output 89
14 Network 90
14.1 Network Access 90
14.1.1 Automatic IP assignment 90
14.1.2 IP V4 address 90
14.1.3 IP V6 address 91
14.1.4 DNS server address 1 91
14.1.5 Video transmission 91
14.1.6 TCP rate control 91
14.1.7 HTTP browser port 91
14.1.8 HTTPS browser port 92
14.1.9 RCP+ port 1756 92
14.1.10 Telnet support 92
14.1.11 Interface mode ETH 92
14.1.12 Network MSS [Byte] 92
14.1.13 iSCSI MSS [Byte] 93
14.1.14 Network MTU [Byte] 93
14.1.15 Enable DynDNS 93
14.1.16 Provider 93
14.1.17 Host name 93
14.1.18 User name 93
14.1.19 Password 93
14.1.20 Force registration now 93
14.1.21 Status 94
14.2 Advanced 95
14.2.1 SNMP 95
14.2.2 Authentication (802.1x) 96
14.2.3 RTSP port 96
14.2.4 UPnP 96
14.2.5 TCP metadata input 96
14.2.6 Quality of service 96
14.2.7 Cloud-based services 97
14.3 Multicast 98
14.3.1 Enable 98
14.3.2 Multicast Address 98
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
10 en | Table of Contents Camera Browser Interface
14.3.3 Port 99
14.3.4 Streaming 99
14.3.5 Multicast packet TTL 99
14.4 Image Posting 100
14.4.1 JPEG 100
14.5 Accounts 101
14.6 IP V4 filter 102
15 Service 103
15.1 Maintenance 103
15.1.1 Update server 103
15.1.2 Firmware 103
15.1.3 Upload history 104
15.1.4 Configuration 104
15.1.5 SSL certificate 104
15.1.6 Maintenance log 105
15.2 System Overview 105
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Browser connection | en 11
1 Browser connection
A computer with Microsoft Internet Explorer is used to receive
live images from the camera, control the camera, and replay
stored sequences. The camera is configured over the network
using the browser.
1.1 System requirements
– Network access (Intranet or Internet)
– Microsoft Internet Explorer version 9 (32-bit only)
– Screen resolution at least 1024 × 768 pixels
– 16- or 32-bit color depth
– JVM installed
The Web browser must be configured to enable Cookies from
the IP address of the unit.
In Windows Vista, deactivate protected mode on the Security
tab under Internet Options.
To play back live video images, an appropriate ActiveX must be
installed on the computer. If necessary, install the Bosch Video
Client.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
12 en | Browser connection Camera Browser Interface
1.2 Establishing the connection
The camera must have a valid IP address and a compatible
subnet mask to operate on your network. By default, DHCP is
pre-set at the factory to ON and so your DHCP server assigns an
IP address. With no DHCP server the default address is
192.168.0.1
1. Start the Web browser.
2. Enter the IP address of the camera as the URL.
3. During initial installation, confirm any security questions
that appear.
Note:
If you do not connect, the camera may have reached its
maximum number of connections. Depending on the device and
network configuration, each camera can have up to 25 web
browser connections, or up to 50 connections via Bosch Video
Client or Bosch Video Management System.
1.2.1 Password protection in camera
A camera offers the option of limiting access across various
authorization levels. If the camera is password-protected, a
message to enter the password appears.
1. Enter the user name and the associated password in the
appropriate fields.
2. Click OK. If the password is correct, the desired page is
displayed.
1.3 Protected network
If a RADIUS server is used for network access control (802.1x
authentication), the camera must be configured first. To
configure the camera, connect it directly to a computer using a
network cable and configure the two parameters, Identity and
Password. Only after these have been configured can
communication with the camera via the network occur.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface System Overview | en 13
2 System Overview
When a connection is established, the Livepage is initially
displayed. The application title bar displays three items:
LIVEPAGE, PLAYBACK, SETTINGS.
Note:
The PLAYBACK link is only visible if a storage medium has been
configured for recording. (With VRM recording this option is not
active.)
2.1 Livepage
The LIVEPAGE is used to display the live video stream and
control the camera.
2.2 Recordings
The PLAYBACK page is used for playing back recorded
sequences.
2.3 Settings
The SETTINGS page is used to configure the camera and the
application interface.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
14 en | Operation via the browser Camera Browser Interface
3 Operation via the browser
3.1 Livepage
After the connection is established, the Livepage is initially
displayed. It shows the live video image on the right of the
browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video
image. The items shown depend on the settings on the
LIVEPAGE Functions page.
Figure 3.1 Livepage
3.1.1 Image selection
Click a tab below the video image to display a camera image
stream.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Operation via the browser | en 15
3.1.2 Status icons
Various overlays in the video image provide important status
information. The overlays provide the following information:
Decoding error
The frame might show artefacts due to decoding errors. If other
frames reference this frame, they might also show decoding
errors but won’t be marked with the icon.
Alarm flag
Shown on a media item to indicate an alarm.
Communication error
A communication error, such as a connection failure to the
storage medium, a protocol violation or a timeout, is indicated
by this icon. An automatic reconnection procedure is started in
the background to recover from this error.
Gap
Indicates a gap in the recorded video.
Watermark flag
Watermark is set on media item.
Invalid watermark flag
Indicates that the watermark is not valid.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
16 en | Operation via the browser Camera Browser Interface
Motion flag
Indicates that motion is dectected.
Storage discovery
Indicates that recorded video is being retrieved.
3.1.3 Cameras with PTZ control
For cameras where PTZ control is possible, the View Control
panel is activated.
Pan and tilt
To control the pan and tilt of PTZ cameras:
Click and hold the up or down arrows to tilt.
Click and hold the left or right arrows to pan.
Click and hold the center area to control both.
Move the mouse cursor over the video image; additional options
for controlling peripherals are displayed with the mouse cursor.
Zoom, focus, and iris
To control the zoom, focus, and iris of PTZ cameras:
1. Click and hold to zoom out; click and hold
to zoom in.
2. Click and hold for far focus; click and hold
for near focus.
3. Click and hold to close the iris; click and hold
to open the iris.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Operation via the browser | en 17
Pre-position
To move the camera to a pre-position, click one of the buttons
numbered one to six.
To store the current position of the camera in a pre-position:
1. Position the camera.
2. Enter a pre-position number.
3. Click Set.
3.1.4 View Control ROI
(not for SD cameras)
When the stream 2 encoder stream is set for Region of Interest
(ROI), a specific type of View Control panel is activated.
Refer to Section 9.2.1 H.264 settings, page 57 for more
information on setting up stream 2. (If dual ROI is available,
open the camera in a second browser window to set up the
second ROI on stream 2.)
Zoom
To zoom in on a region of the stream 2 image:
Click and hold to zoom in; click and hold to
zoom out.
Click to see the full image.
Select an area
To select a particular region of the image:
1. Click and hold the arrows to move up and down, and from
side to side through the image.
2. Click and hold the center area to move in all directions.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
18 en | Operation via the browser Camera Browser Interface
Set positions
To store the current view:
1. Select a region of interest.
2. Click Set.
3. Click a number.
To display a pre-set region of interest, click one of the buttons
numbered one to six.
3.1.5 Cameras with alarm I/O
(only for cameras with I/O connections)
The alarm input and output are displayed in the Digital I/O
panel next to the camera image.
The alarm symbol is for information and indicates the input
status of the alarm input:
– Active 1 = Symbol lights
– Active 0 = Symbol not lit.
The camera alarm output allows the operation of an external
device (for example, a light or a door opener).
To operate, click the relay symbol.
– The symbol is red when the output is activated.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Operation via the browser | en 19
3.1.6 System Log / Event Log
The System Log field contains information about the operating
status of the camera and the connection.
Events such as the triggering or the end of alarms are shown in
the Event Log field.
To view, filter and save these messages to a file, click
in the top right-hand corner.
To clear the log, click in the top right-hand corner of
the relevant field.
3.1.7 Saving snapshots
Individual images from the video sequence that is currently
being shown on the Livepage can be saved in JPEG format on
the computer's hard drive.
Click the camera icon to save a single image.
– The storage location depends on the configuration of
the camera.
3.1.8 Recording video sequences
Sections of the video sequence that is currently being shown on
the Livepage can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1. Click the recording icon to record video sequences.
– Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
2. Click the recording icon again to stop recording.
Play back saved video sequences using the Player from
Bosch Security Systems.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
20 en | Operation via the browser Camera Browser Interface
3.1.9 Running recording program
The hard drive icon below the camera images on the Livepage
changes during an automatic recording.
The icon lights up and displays a moving graphic to
indicate a running recording. If no recording is taking place, a
static icon is displayed.
3.1.10 Audio communication
(only for cameras with audio)
Audio can be sent and received via the Livepage if the active
monitor and the remote station of the camera support audio.
1. Press and hold the F12 key on the keyboard to send an
audio signal to the camera.
2. Release the key to stop sending audio.
All connected users receive audio signals sent from the camera
but only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
3.1.11 Processor load
When accessing the camera with a browser, the processor load
and network information is available in the upper right of the
window next to the Bosch logo.
Move the mouse cursor over the icons to display numerical
values. This information can help with problem solving or when
fine tuning the device.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Operation via the browser | en 21
3.2 Playback page
Click PLAYBACK to access the Playback page from the
Livepage or Settings page. The Playback link is only visible if a
direct iSCSI or SD card has been configured for recording.
(With VRM recording this option is not active.)
A collapsible panel on the left of the display has four tabs:
– Track list
– Export
– Search
– Search results
Select Recording 1 or 2 from the drop-down menu at the top of
the window.
3.2.1 Selecting recordings for playback
To see all saved sequences:
1. Click the track list tab .
A list of tracks with a number assigned to each sequence is
displayed. Start time and stop time, recording duration,
number of alarms, and recording type are shown for each
track.
2. At the bottom of the window, select the maximum number
of tracks to be displayed in the list.
3. Use the arrow buttons at the bottom to browse the list.
4. To view tracks beginning from a particular time, enter the
time code and click Get Tracks.
5. Click a track. The playback for the selected sequence
starts.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
22 en | Operation via the browser Camera Browser Interface
3.2.2 Exporting tracks
1. Select a track in the track list.
2. Click the export tab .
3. The start and stop time are filled-in for the selected track.
If required, change the times.
4. Select a target.
5. Select the original or a condensed speed.
6. Click the save icon .
Note:
The target server address is set on the Network / Accounts
page.
3.2.3 Searching for tracks
1. Click the search tab .
2. Select a search mode; Any motion, Field, Line crossing,
Recorded alarms, or Best faces.
3. To limit the search to a particular time range, enter the
start and stop times.
4. Click Start Search.
The results are shown in the search results tab .
5. Click a result to play it back.
6. Click the search tab to enter a new search.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Operation via the browser | en 23
3.2.4 Controlling playback
Time bar
The time bar below the video image allows quick orientation.
The time interval associated with the sequence is displayed in
the bar in gray. A green arrow above the bar indicates the
position of the image currently being played back within the
sequence.
The time bar offers various options for navigation in and
between sequences.
– Change the time interval displayed by clicking the plus or
minus icons. The display can span a range from two
months to a few seconds.
– If required, drag the green arrow to the point in time at
which the playback should begin.
– Red bars indicate the points in time where alarms were
triggered. Drag the green arrow to navigate to these points
quickly.
Controls
Use the jog dial to quickly scan the
sequences. The time code is displayed above it.
The buttons have the following functions:
Start/Pause playback
Select the playback speed using the speed regulator
.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
24 en | Operation via the browser Camera Browser Interface
Jump to start of active sequence or to previous sequence
Jump to start of the next video sequence in the list
Bookmarks
You can set markers in a sequence and jump to these directly.
These bookmarks are indicated as small yellow arrows above
the time interval. Use the bookmarks as follows:
Jump to the previous bookmark
Set bookmark
Jump to the following bookmark
Bookmarks are only valid while in the Recordings page; they are
not saved with the sequences. All bookmarks are deleted when
you leave the page.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Settings Overview | en 25
4 Settings Overview
4.1 Configuration Menu
The settings page provides access to the configuration menu
which contains all the unit's parameters arranged in groups.
There are two options for configuring the unit or checking the
current settings:
– Basic Mode
– Advanced Mode
In Basic Mode the most important parameters are arranged in
seven groups. This allows you to change the basic settings with
just a few entries and then put the device into operation.
Advanced Mode is recommended only for expert users or
system support personnel. You can access all device
parameters in this mode. Settings that affect the fundamental
functionality of the device (such as firmware updates) can only
be changed in this mode.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
26 en | Settings Overview Camera Browser Interface
4.2 Settings
Navigation
To view the current settings:
1. Click the Basic Mode menu or the Advanced Mode menu
to expand it.
2. For the Advanced Mode menu, click a menu sub-heading
to expand it.
3. Click a sub-menu. The corresponding page is opened.
Making Changes
You can change the settings by entering new values or by
selecting a predefined value from a list field.
Note:
When entering names do not use any special characters, for
example &. Special characters are not supported by the internal
recording management system.
Saving changes
After making changes in a window, click Set to send the new
settings to the device and save them there.
Clicking Set saves only the settings in the current window.
Changes in any other windows are ignored.
Click SETTINGS in the applications title bar to close the
window without saving the changes made.
Note:
All settings are backed up in the device memory so they are not
lost even if the power fails. The exception is the time settings,
which are lost after 1 hour without power if no central time
server is selected.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Basic Mode | en 27
5 Basic Mode
5.1 Device Access
5.1.1 Naming
Enter a unique name to assist in identification. This name
simplifies the management of multiple devices in more
extensive systems.
The name is used for remote identification, for example, in the
event of an alarm. Choose a name that makes it as easy as
possible to identify the location unambiguously.
5.1.2 Password
A password prevents unauthorized access to the device. The
device has three authorization levels: service, user, and live.
– service is the highest authorization level. Entering the
correct password gives access to all the functions of the
camera and allows all configuration settings to be
changed.
– user is the middle authorization level. This user can
operate the device, play back recordings, and also control
a camera but cannot change the configuration.
– live is the lowest authorization level. It can only be used to
view the live video image and switch between the different
live image displays.
You can define and change a password for each authorization
level if you are logged in as service or if the camera is not
password protected.
Use the various authorization levels to limit access. Proper
password protection is only guaranteed if all higher
authorization levels are also protected with a password. For
example, if a live password is assigned, a service and a user
password should also be set. When assigning passwords,
always start from the highest authorization level, service, and
use different passwords.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
28 en | Basic Mode Camera Browser Interface
Password
Define or change a separate password for each level. Enter the
password (19 characters maximum) for the selected level.
Confirm password
Re-enter the new password to ensure that there are no typing
mistakes.
The new password is only saved after clicking Set. Therefore,
click Set immediately after entering and confirming the
password, even if assigning a password at another level.
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Camera Browser Interface Basic Mode | en 29
5.2 Date/Time
5.2.1 Device date, time and zone
If there are multiple devices operating in the system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all devices are operating on the
same time. Device time, date and time zone are shown.
Click Sync to PC to apply the system time from your
computer to the device.
Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
5.2.2 Time server IP address
The camera can receive the time signal from a time server using
various time server protocols and then use it to set the internal
clock. The device polls the time signal automatically once every
minute.
Enter the IP address of a time server.
5.2.3 Time server type
Select the protocol that is supported by the selected time
server. It is recommended that you select the SNTP server
protocol. This protocol provides high accuracy and is required
for special applications and future function extensions.
Select Time server if the server uses the RFC 868 protocol.
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06
30 en | Basic Mode Camera Browser Interface
5.3 Network
Use the settings on this page to integrate the device into a
network. Some changes only take effect after a reboot. In this
case, the Set button changes to Set and Reboot.
1. Make the desired changes.
2. Click Set and Reboot.
– The device is rebooted and the changed settings are
activated. If the IP address, subnet mask, or gateway
address is changed, then the device is only accessible
under the new addresses after the reboot.
DHCP
If the network has a DHCP server for dynamic IP address
allocation, set this parameter to On to activate the automatic
acceptance of DHCP-assigned IP addresses.
For certain applications, the DHCP server must support the
fixed assignment between IP address and MAC address, and
must be appropriately set up so that, once an IP address is
assigned, it is retained each time the system is rebooted.
IP address
Enter the desired IP address for the camera. The IP address
must be valid for the network.
Subnet mask
Enter the appropriate subnet mask for the set IP address.
Gateway address
Enter the IP address of the gateway to establish a connection to
a remote location in a different subnet. Otherwise, this field can
remain empty (0.0.0.0).
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
Loading...