Bosch NBN-832-18W User Manual

DinionHD 1080p IP Camera

NBN-832

en Installation Manual

DinionHD 1080p IP Camera Table of Contents | en 3

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

Table of Contents

1Safety 6

1.1 Safety precautions 6

1.2 Important safety instructions 7

1.3 Connection in applications 8

1.4 FCC & ICES compliance 9

1.5 MicroSD cards 10

1.6 UL certification 10

1.7 Bosch notices 11

1.8 Copyrights 12

2 Introduction 13

2.1 Features 13

3 System Information 14

3.1 Overview of functions 14

3.1.1 Progressive scan 14

3.1.2 Day/Night function 14

3.1.3 Quad-streaming 14

3.1.4 ONVIF (Open Network Video Interface Forum) 14

3.1.5 Audio 15

3.1.6 Alarm I/O 15

3.1.7 Tamper detection and motion detection 15

3.1.8 Video encoding 15

3.1.9 Multicast 15

3.1.10 Power-over-Ethernet 15

3.1.11 Data interface 15

3.1.12 Encryption 16

3.1.13 Recording 16

3.1.14 Configuration 16

3.2 Operation with external systems 17

4 Planning 18

4.1 Unpacking 18

4 en | Table of Contents DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

4.2 System requirements 18

5 Installation 19

5.1 Lens mounting 19

5.2 Mounting the camera 21

5.3 Network (and power) connector 22

5.4 Power connector 23

5.5 Alarm and relay connector 24

5.6 Audio connectors 25

5.7 Local storage 26

5.8 Video service monitor connector 27

5.9 Data connector 28

6 Install Wizard 29

6.1 Using the camera install wizard 29

6.1.1 Adjustment procedure 30

7 Camera set-up 32

7.1 Reset button 32

7.2 Day/Night switching 33

8 Browser connection 34

8.1 Protected network 34

9Troubleshooting 35

9.1 Function test 35

9.2 Resolving problems 36

9.3 Customer service 38

10 Maintenance 39

10.1 Testing the network connection 39

10.2 Communication with Terminal Program 39

10.3 Repairs 41

10.3.1 Transfer and disposal 41

DinionHD 1080p IP Camera Table of Contents | en 5

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

11 Technical Data 42

11.1 Specifications 42

6 en | Safety DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.

CAUTION!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

CAUTION!

The camera must be connected to earth.

DinionHD 1080p IP Camera Safety | en 7

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings on the unit and in the
operating instructions before operating the unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and
lightning surges.

5. Adjust only those controls specified in the operating
instructions.

6. Operate the unit only from the type of power source
indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.

8. Install in accordance with the manufacturer's instructions
in accordance with applicable local codes. Use only
attachments/accessories specified by the manufacturer.
Equipment change or modification could void the user's
guarantee or authorization agreement.

9. Connect the earth terminal of the camera to the
system earth of the installation to ensure correct safety
and EMC/RFI protection.

8 en | Safety DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

1.3 Connection in applications

Grounding

Safety (power) ground is indicated by the symbol on the
rear of the camera.
U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA
No.70, provides information regarding proper grounding.

12 VDC / 24 VAC power source: This unit is intended to
operate with a limited power source. The unit is intended to
operate at either 12 VDC or 24 VAC (if PoE is not available).
User supplied wiring must be in compliance with electrical
codes (Class 2 power levels).

PoE: Use only approved PoE devices. Power-over-Ethernet can
be connected at the same time as a 12 VDC or 24 VAC power
supply.

If auxiliary power (12 VDC or 24 VAC) and PoE is applied
simultaneously, the camera selects auxiliary input and shuts off
the PoE.

DinionHD 1080p IP Camera Safety | en 9

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

1.4 FCC & ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.

10 en | Safety DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

1.5 MicroSD cards

Bosch Security systems recommends that local storage on
microSD card should only be used for alarm recording and
Automatic Network Replenishment (ANR) applications. To
minimize the risk of lost of digital information, we recommend
multiple, redundant recording systems, and a procedure to
back up all digital information.

1.6 UL certification

Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in ULs Standard(s) for Safety for Information
Technology Equipment, UL 60950-1. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that
electronic and electrical appliances, which have reached the
end of their working life, must be collected and disposed of
separately from household waste material. Separate collecting
systems are usually in place for disused electronic and
electrical products. Please dispose of these units at an
environmentally compatible recycling facility, per European

Directive 2002/96/EC

DinionHD 1080p IP Camera Safety | en 11

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

1.7 Bosch notices

Video loss

Video loss is inherent to digital video recording; therefore,
Bosch Security Systems cannot be held liable for any damage
that results from missing video information. To minimize the
risk of lost digital information, Bosch Security Systems
recommends multiple, redundant recording systems, and a
procedure to back up all analog and digital information.

Optical elements

Optical elements are sensitive and should be protected at all
times. Do not allow objects to come into contact with glass
surfaces and do not touch optical elements with your fingers.

Copyright

This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.

Trademarks

All hardware and software product names used in this
document are likely to be registered trademarks and must be
treated accordingly.

Note

This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user
guide and the product described.

More information

For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com

12 en | Safety DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

1.8 Copyrights

The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal--
24-240-75-75-P-138-ISO10646-1" and "Adobe-Helvetica-Bold-R-
Normal--12-120-75-75-P-70-ISO10646-1" under the following
copyright:
Copyright 1984-1989, 1994 Adobe Systems Incorporated.
Copyright 1988, 1994 Digital Equipment Corporation.
Permission to use, copy, modify, distribute and sell this
software and its documentation for any purpose and without
fee is hereby granted, provided that the above copyright
notices appear in all copies and that both those copyright
notices and this permission notice appear in supporting
documentation, and that the names of Adobe Systems and
Digital Equipment Corporation not be used in advertising or
publicity pertaining to distribution of the software without
specific, written prior permission.

This software is based in part on the work of the Independent
JPEG Group.

DinionHD 1080p IP Camera Introduction | en 13

Bosch Security Systems Installation Manual AM18-Q0600 | v1.0 | 2011.07

2 Introduction

2.1 Features

The 1080p HD IP Day/Night camera is a high-performance,
surveillance color camera.
The camera uses H.264 compression technology to give clear
images while reducing bandwidth and storage requirements. It
is also ONVIF compliant to improve compatibility during system
integration. The camera operates as a network video server and
transmits video and control signals over data networks, such as
Ethernet LANs and the Internet. The camera is easy to install
and ready to use. Features include:
– Progressive scan 1/2.7-inch CMOS HD sensor
– True Day/Night performance with switchable IR filter
–Quad-streaming
– MicroSD card slot
– ONVIF conformant
– Two-way audio and audio alarm
– Alarm input and alarm output to external devices
– Pre-programmed operation modes
– Adaptive dynamic noise reduction
– Enhanced video motion detection
– Video and data transmission over IP data networks
– Multicast function
– Integrated Ethernet interface (10/100 Base-T)
– Power-over-Ethernet (PoE)
– Data interface RS485/RS422/RS232 for PTZ control
– Password protection
– Event-driven, automatic connection
– Integrated Web server for live viewing and configuration via

a browser

– Firmware update through web browser

14 en | System Information DinionHD 1080p IP Camera

AM18-Q0600 | v1.0 | 2011.07 Installation Manual Bosch Security Systems

3 System Information

3.1 Overview of functions

The camera incorporates a network video server. Its primary
function is to encode video and control data for transmission
over an IP network. With its H.264 encoding, it is ideally suited
for IP communication and for remote access to digital video
recorders and IP systems. The use of existing networks means
that integration with CCTV systems or local networks can be
achieved quickly and easily. Video images from a single camera
can be simultaneously received on several receivers.

3.1.1 Progressive scan

The camera captures and processes progressively scanned
images. When there is fast motion in a scene, progressively
scanned images are generally sharper than interlaced images.

3.1.2 Day/Night function

In night mode, the camera enhances low light viewing by
switching the IR (infrared) filter out of the optical path and
providing a monochrome image. The camera can switch from
color to monochrome mode automatically by sensing the
illumination level, manually via the alarm input, or remotely via a
web browser.

3.1.3 Quad-streaming

Quad-streaming enables the camera to deliver three H.264
streams (a HD stream, a downscaled resolution stream, and a
HD I-frame only stream) together with an M-JPEG stream.
These four streams facilitate bandwidth-efficient viewing and
recording options as well as integration with third-party video
management systems.

3.1.4 ONVIF (Open Network Video Interface Forum)

The camera complies to the ONVIF standard which means that
it is easier to install and integrate into larger systems. The