Bosch NBN-80122-F6A, NBN-80122-F2A Installation Manual
DINION IP ultra 8000 MP
NBN-80122
en Installation Manual
DINION IP ultra 8000 MP Table of Contents | en 3
Table of contents
1
1.1 Safety message explanation 5
1.2 Safety precautions 5
1.3 Important safety instructions 6
1.4 FCC and ICES compliance 7
1.5 Notices 8
2
3
3.1 Performance 10
3.2 Lens options 10
3.3 Application variants 11
3.4 Using the camera 11
3.5 Operation with external systems 11
4
4.1 Unpacking 13
4.2 Contents 13
4.3 System requirements 14
5
5.1 Lens mounting 15
5.2 Mounting the camera 16
5.3 Local storage 17
6
6.1 Network (and PoE power) 18
6.2 Auxiliary power 19
6.3 Alarm 20
6.4 Audio 22
6.5 Video monitor 23
6.6 Data 24
7
7.1 Setting up the camera 25
7.2 Local set-up 25
7.2.1 Field of view 26
7.2.2 Iris value 26
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
Safety 5
Short information 9
System overview 10
Planning 13
Installation 15
Connection 18
Configuration 25
4 en | Table of Contents DINION IP ultra 8000 MP
7.2.3 Application variant 26
7.2.4 Focus 26
7.3 Configuration via web browser 27
7.3.1 Set-up via web browser 28
7.4 True Day/Night switching 29
8
Troubleshooting 30
8.1 LED error status 30
8.2 Resolving problems 30
8.3 Testing the network connection 34
8.4 Customer service 34
8.5 Terminal program 35
9
Maintenance 37
9.1 Cleaning 37
9.2 Repair 37
9.3 Reset 38
10
Decommissioning 39
10.1 Transfer 39
10.2 Disposal 39
11
Technical data 40
11.1 Specifications 40
11.2 Dimensions 49
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
!
!
!
!
DINION IP ultra 8000 MP Safety | en 5
1
1.1
1.2
Safety
Safety message explanation
Caution!
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Notice!
Indicates a situation which, if not avoided, could result in
damage to the equipment or environment, or data loss.
Safety precautions
Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
Caution!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
(NEC 800 CEC Section 60) or applicable local codes.
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
The auxiliary power supply unit must be isolated from earth.
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
6 en | Safety DINION IP ultra 8000 MP
1.3
Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings before operating the
unit.
1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Never spill liquid of any kind on the unit.
4. Take precautions to protect the unit from power and
lightning surges.
5. Adjust only those controls specified in the operating
instructions.
6. Operate the unit only from the type of power source
indicated on the label.
7. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.
8. Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
9. Use only attachments/accessories specified by the
manufacturer.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
DINION IP ultra 8000 MP Safety | en 7
1.4
FCC and ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the
dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
8 en | Safety DINION IP ultra 8000 MP
1.5
Notices
Notice!
Optical elements are sensitive and should be protected at all
times. Do not allow objects to come into contact with glass
surfaces and do not touch optical elements with your fingers.
Notice!
Video loss is inherent to digital video recording; therefore,
Bosch Security Systems cannot be held liable for any damage
that results from missing video information.
To minimize the risk of losing information, we recommend
multiple, redundant recording systems, and a procedure to
back up all analog and digital information.
Notice!
We recommend that memory cards only be used for local
storage of alarm recordings.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
DINION IP ultra 8000 MP Short information | en 9
2
Short information
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was correct at the time of printing, however, the content can
change without notice. Bosch Security Systems accepts no
liability for damage resulting directly or indirectly from faults,
incompleteness or discrepancies between this manual and the
product described.
Trademarks
All hardware and software product names used in this document
are likely to be registered trademarks and must be treated
accordingly.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
http://www.boschsecurity.com/catalog_overview.htm
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
10 en | System overview DINION IP ultra 8000 MP
3
3.1
3.2
System overview
Performance
The DINION IP ultra 8000 MP with 12 megapixel resolution
offers crisp, clear and extremely detailed images for the most
demanding IP video surveillance requirements. It captures 12
megapixel at 20 fps, and 4K UHD at 30 fps, so providing images
of fast moving objects in high resolutions. The content-rich
image allows effective retrospective analysis at the level of
detail that makes the difference when collecting forensic
evidence.
The camera offers a wide-angle overview and multiple focus
points on a single screen so now you can focus on details
without losing the bigger picture.
This IP camera operates as a network video server to transmit
video and control signals over Ethernet LANs and the Internet.
The integrated encoder uses H.264 compression technology to
give clear images while reducing bandwidth and storage
requirements.
Lens options
Versions
The camera is available in the following versions:
– Camera body with permanently attached 5 mm lens.
– Camera body with permanently attached 3.2 mm lens.
– Camera body with C/CS lens mount and motorized focus
adjustment.
Three telephoto lenses (75 mm, 50 mm and 35 mm), specifically
matched to the camera body, are optionally available.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
DINION IP ultra 8000 MP System overview | en 11
3.3
3.4
Application variants
The camera has a choice of application variants that set up the
camera for optimum performance in a specific environment.
Select the application variant best suited to your installation.
The application variant must be selected before any other
changes are made, as the camera reboots automatically and
resets the factory defaults when the application variant is
changed.
The DINION IP ultra 8000 MP has three application variants:
– 4K UHD
– 12MP (4:3)
– 1080p
Using the camera
To access the features of the camera, use a web browser. The
browser provides live viewing of the camera streams in the
interface window, and also allows you to access and change the
extensive list of settings and parameters for camera
configuration. Refer to the software manual for more
information on the browser interface.
The camera recording and storage functions include local alarm
recording and recording to iSCSI-based systems. The camera
can also use the Bosch Video Recording Manager (VRM) to
control recording and storage. Integration with the many Bosch
recording solutions is seamless.
3.5
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
Operation with external systems
Using a web browser to access the camera’s video streams and
functions is the most direct way of using the camera. The
Bosch Video Client can be downloaded and used for multiplecamera viewing, playback and configuration. A Bosch
Video Security App is also available for remote viewing.
If the camera is used in larger surveillance systems, the Bosch
Video Management System offers a perfect integrated solution.
en | System overview DINION IP ultra 8000 MP
12
Third-party integrators can easily access the internal feature set
of the camera for integration into large projects. Access to IVA
metadata is available to integrators via RTSP.
When connected to external systems, many of the camera
configuration parameters are controlled by the system and not
by the settings made via a web browser.
Bosch Video Client
The Bosch Video Client is a free Windows application to view,
operate, control, and administer surveillance cameras and
installations at remote locations. It offers a user-friendly
interface for easy live viewing of multiple cameras, playback,
forensic search and export.
Video Security Client
The Video Security Client is a free, easy-to-use video-surveillance
application provided by Bosch for local and remote monitoring
of IP cameras and appliances. The software supports systems
up to 16 cameras.
IP Helper
The IP Helper tool is a free PC application that makes it easy to
detect Bosch cameras and devices on your network.
Download store
Download the latest applications and firmware from:
http://downloadstore.boschsecurity.com/
Bosch Video Management System
The Bosch Video Management System is a unique enterprise IP
video surveillance solution that provides seamless management
of digital video, audio and data across any IP network. It is
designed to work with Bosch security products as part of a total
video surveillance management system.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
DINION IP ultra 8000 MP Planning | en 13
4
4.1
4.2
Planning
Unpacking
This equipment should be unpacked and handled with care. If an
item appears to have been damaged in shipment, notify the
shipper immediately.
Verify that all parts are included. If any items are missing, notify
your Bosch Security Systems Sales or Customer Service
Representative.
The original packaging is the safest container in which to
transport the unit and can be used if returning the unit for
service.
Contents
The packaging contains:
– DINION IP 8000 camera
– Quick install instructions
– Power connector
– Data/Alarm connector
– Identification labels
– C/CS mount adapter ring for mounting a lens with a C-
mount (not supplied for factory fitted lenses)
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
14 en | Planning DINION IP ultra 8000 MP
4.3
System requirements
To enjoy the full benefits of megapixel resolutions, ensure that
the computer, the graphic adapter, the display connections, and
the monitor are sufficiently powerful to view our camera images
at their best.
Our minimum recommendations are:
– Computer with Dual core HyperThreading processor or
better
– 4K capable graphic card
– Windows 7 or later operating system
– Network access
– Internet Explorer version 11 or later
– or –
Application software, for example, Video Security Client
Bosch Video Client or Bosch Video Management System.
Notice!
Megapixel cameras can generate high bitrate streams. Ensure
that your network can handle high volume traffic and that you
use a powerful, high performance computer.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
C/CS
adapter
DINION IP ultra 8000 MP Installation | en 15
5
5.1
Installation
Lens mounting
The factory-mounted lenses are already calibrated and do not
need any adjustments.
There are three telephoto lenses optionally available for the
camera body version:
– a 35 mm lens (LFF-8012C-D35)
– a 50 mm lens (LFF-8012C-D50)
– a 75 mm lens (LFF-8012C-D75)
The separate camera body includes an auto-focus lens wizard to
ensure that lenses can be easily focused. The automatic
motorized focus adjustment with 1:1 pixel mapping ensures that
the camera with these telephoto lenses is always focused
accurately.
Notice!
Do not try to adjust a factory-fitted lens.
Do not allow dust to get onto the sensor or lens surface.
Lenses weighing more than 0.5 kg (1.1lbs) must be separately
supported.
To attach a lens to the camera:
1. Remove the sensor protection cap from the camera.
2. For C-mount lenses, screw the C/CS lens adapter ring onto
the camera.
3. Screw the lens onto the camera.
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688
1/4”-20 UNC
16 en | Installation DINION IP ultra 8000 MP
5.2
Mounting the camera
Notice!
Do not expose the image sensors to direct sunlight.
Do not obstruct the free flow of air around the camera.
The camera can be mounted either from the top or from the
bottom (1/4" 20 UNC thread).
Note:
Do not mount the camera upside-down.
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems
Loading...