Bosch NBN-80052, NBN-80122 Installation Manual

DINION IP 8000 MP

NBN-80052 | NBN-80122

en Installation Manual

Table of contents

Safety 5

1.1 Safety message explanation 5

1.2 Safety precautions 5

1.3 Important safety instructions 6

1.4 FCC and ICES compliance 7

1.5 Notices 8

Short information 9

System overview 10

3.1 DINION IP 8000 family 10

3.2 Application variants 10

3.3 Using the camera 11

3.4 Operation with external systems 12

Planning 13

4.1 Unpacking 13

4.2 Contents 13

4.3 System requirements 13

Installation 14

5.1 Lens mounting 14

5.2 Mounting the camera 16

5.3 Local storage 17

Connection 18

6.1 Network (and PoE power) 18

6.2 Auxiliary power 19

6.3 Alarm 20

6.4 Audio 22

6.5 Video monitor 23

6.6 Data 24

Configuration 25

7.1 Setting the field of view 25

7.1.1 Camera install wizard 25

7.1.2 Using the install wizard 26

7.2 True Day/Night switching 30

7.3 Camera configuration 31

DINION IP 8000 MP Table of Contents | en 3

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

7.3.1 Bosch Video Client 31

7.4 Browser connection 32

7.4.1 Establishing the connection 32

7.4.2 Protected network 32

Troubleshooting 33

8.1 Function test 33

8.2 Resolving problems 33

8.3 Testing the network connection 37

8.4 Customer service 37

8.5 Terminal program 38

Maintenance 40

9.1 Cleaning 40

9.2 Repair 40

9.3 Reset 40

Decommissioning 41

10.1 Transfer 41

10.2 Disposal 41

Technical data 42

11.1 Specifications (NBN-80052) 42

11.2 Specifications (NBN-80122) 48

4 en | Table of Contents DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Safety

Safety message explanation

Caution!

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in

damage to the equipment or environment, or data loss.

Safety precautions

Caution!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Caution!

Installation should only be performed by qualified service

personnel in accordance with the National Electrical Code

(NEC 800 CEC Section 60) or applicable local codes.

Caution!

Use only a +12 VDC power supply as an auxiliary power source.

The auxiliary power supply unit must be isolated from earth.

1.1

1.2

DINION IP 8000 MP Safety | en 5

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.

2. Do not install unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and lightning surges.

5. Adjust only those controls specified in the operating instructions.

6. Operate the unit only from the type of power source indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.

8. Install in accordance with the manufacturer's instructions in accordance with applicable local codes.

9. Use only attachments/accessories specified by the manufacturer.

1.3

6 en | Safety DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

FCC and ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – reorient or relocate the receiving antenna; – increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help. Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

1.4

DINION IP 8000 MP Safety | en 7

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

Notices

Notice!

Optical elements are sensitive and should be protected at all

times. Do not allow objects to come into contact with glass

surfaces and do not touch optical elements with your fingers.

Notice!

Video loss is inherent to digital video recording; therefore,

Bosch Security Systems cannot be held liable for any damage

that results from missing video information.

To minimize the risk of losing information, we recommend

multiple, redundant recording systems, and a procedure to

back up all analog and digital information.

Notice!

We recommend that memory cards only be used for local

storage of alarm recordings.

1.5

8 en | Safety DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Short information

This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was correct at the time of printing, however, the content can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between this manual and the product described.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

More information

For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com

DINION IP 8000 MP Short information | en 9

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

System overview

DINION IP 8000 family

The DINION IP 8000 family consists of the following cameras: – DINION IP starlight 8000 MP for high-performance in

challenging light conditions – DINION IP ultra 8000 MP for ultra high-definition These IP cameras operate as network video servers and transmit video and control signals over Ethernet LANs and the Internet. The integrated encoder uses H.264 compression technology to give clear images while reducing bandwidth and storage requirements.

Application variants

The camera has a choice of application variants that set up the camera for optimum performance in a specific environment. Select the application variant best suited to your installation. The application variant must be selected before any other changes are made, as the camera reboots automatically and resets the factory defaults when the application variant is changed. The DINION IP starlight 8000 MP has three application variants: – 5MP (16:9) – 5MP (4:3) – 1080p The DINION IP ultra 8000 MP has three application variants: – 4K UHD – 12MP (4:3) – 1080p

3.1

3.2

10 en | System overview DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Using the camera

To access the features of the camera, use a web browser. The browser provides live viewing of the camera streams in the interface window, and also allows you to access and change the extensive list of settings and parameters for camera configuration. Refer to the software manual for more information on the browser interface. The camera recording and storage functions include local alarm recording and recording to iSCSI-based systems. The camera can also use the Bosch Video Recording Manager (VRM) to control recording and storage. Integration with the many Bosch recording solutions is seamless.

3.3

DINION IP 8000 MP System overview | en 11

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

Operation with external systems

Using a web browser to access the camera’s video streams and functions is the most direct way of using the camera. The Bosch Video Client can be downloaded and used for multiplecamera viewing, playback and configuration. A Bosch Video Security App is also available for remote viewing. If the camera is used in larger surveillance systems, the Bosch Video Management System offers a perfect integrated solution. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Access to IVA metadata is available to integrators via RTSP. When connected to external systems, many of the camera configuration parameters are controlled by the system and not by the settings made via a web browser.

Bosch Video Client

The Bosch Video Client is a free Windows application for viewing, operating, controlling, and administering surveillance cameras and installations at remote locations. It offers a userfriendly interface for easy live viewing of multiple cameras, playback, forensic search and export. Download the latest version of the application from: http://downloadstore.boschsecurity.com/

Bosch Video Management System

The Bosch Video Management System is a unique enterprise IP video surveillance solution that provides seamless management of digital video, audio and data across any IP network. It is designed to work with Bosch security products as part of a total video surveillance management system.

3.4

12 en | System overview DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Planning

Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all parts are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packaging is the safest container in which to transport the unit and can be used if returning the unit for service.

Contents

The packaging contains: – DINION IP 8000 camera – Quick install instructions – Power connector – Data/Alarm connector – Identification labels – CS mount adapter ring for mounting a lens with a C-mount

(only for DINION IP starlight 8000 MP)

System requirements

– Computer with Windows XP/Vista/7 operating system,

network access, and Microsoft Internet Explorer web browser version 9.0 or later (32-bit)

-or-

– Computer with network access and reception software, for

example Bosch Video Client and Bosch Video Management System

4.1

4.2

4.3

DINION IP 8000 MP Planning | en 13

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

Installation

Lens mounting

This procedure is only required for cameras not having a factory fitted lens.

Notice!

Lenses weighing more than 0.5 kg (1.1lbs) must be separately

supported.

Pin DC iris lens

1 Damp -

2 Damp +

5.1

14 en | Installation DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Pin DC iris lens

3 Drive +

4 Drive -

1. Remove the sensor protection cap from the camera (if present).

2. Screw the lens onto the camera using the CS or C‑mount (use the adapter ring to attach a C-mount lens).

3. Plug the lens connector into the camera (it automatically detects the type of lens). If a short circuit is detected on the lens connector, the lens circuit is automatically disabled to avoid internal damage. In this case, remove the lens connector and check the pin connections.

DINION IP 8000 MP Installation | en 15

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

Mounting the camera

Notice!

Do not expose the image sensors to direct sunlight.

Do not obstruct the free flow of air around the camera.

1/4”-20 UNC

The camera can be mounted either from the top or from the bottom (1/4" 20 UNC thread).

5.2

16 en | Installation DINION IP 8000 MP

2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems

Local storage

Notice!

Local storage on SD cards should only be used for alarm

recording. To minimize the risk of losing information, use

multiple, redundant recording systems and a procedure to back

up all digital information.

4 5 6 4 5 6

1 2 3 1 2 3

- +

CVBS

E T H

P o E

D A T A

A L A R

1. Unscrew the card slot cover.

2. Slide the memory card into the slot until it locks in place.

3. Screw the cover into place to seal the slot.

5.3

DINION IP 8000 MP Installation | en 17

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665

+ 39 hidden pages