Bosch NBN-50051-V3, NBN-50051-C Specsheet
Video | DINION IP 5000 MP
DINION IP 5000 MP
www.boschsecurity.com
u Stylish indoor network camera
u 5MP for highly detailed images
u Intelligent noise reduction reduces bandwidth and
storage requirements by up to 50%
The 5MP indoor camera is a ready-to-use, complete
network video surveillance system inside a compact
and stylish housing. This camera brings Bosch’s highperformance technology into the realm of homes,
small office and retail businesses by offering a costeffective solution for a broad range of applications.
System overview
The elegant, compact box design is ideal for homes,
offices, businesses or shops where camera size and
appearance is important. The camera has a 1/3-inch
CMOS sensor and is a true day/night camera offering
excellent performance day or night.
Functions
Content Based Imaging Technology
Content Based Imaging Technology (CBIT) is used to
radically improve image quality in all lighting
conditions and to identify areas for enhanced
processing. The camera examines the scene using
intelligent video analytics and provides feedback to retune the image processing. This provides better detail
in the areas that matter and better all-round
performance.
u SD card slot for local recording
u FTP, Dropbox and e-mail alarms
Intelligent Dynamic Noise Reduction reduces
bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction
which actively analyzes the contents of a scene and
reduces noise artifacts accordingly.
The low-noise image and the efficient H.264
compression technology provide clear images while
reducing bandwidth and storage by up to 50%
compared to other H.264 cameras. This results in
reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio.
The average typical optimized bitrate in kbits/s for
various frame rates is shown in the table:
fps 5MP 480p
12 1753 438
5 1136 284
2 489 122
Multiple streams
The innovative multi-streaming feature delivers various
H.264 streams together with an M‑JPEG stream. These
streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video
management systems.
| DINION IP 5000 MP
2
Depending on the resolution and frame rate selected
for the first stream, the second stream provides a copy
of the first stream or a lower resolution stream.
The third stream uses the I-frames of the first stream
for recording; the fourth stream shows a JPEG image
at a maximum of 10 Mbit/s.
Simultaneous analog and IP video outputs
A surge-protected analog video output ensures that
high resolution IP video streaming and an analog video
output are available simultaneously. This means, for
example, that a confrontation monitor can easily be
connected directly to the camera while still
maintaining full IP functionality.
Regions of interest and E-PTZ
Regions of Interest (ROI) can be user defined. The
remote E-PTZ (Electronic Pan, Tilt and Zoom) controls
allow you to select specific areas of the parent image.
These regions produce separate streams for remote
viewing and recording. These streams, together with
the main stream, allow the operator to separately
monitor the most interesting part of a scene while still
retaining situational awareness.
Built-in microphone, two-way audio and audio alarm
The camera has a built-in microphone to allow
operators to listen in on the monitored area. Two-way
audio allows the operator to communicate with
visitors or intruders via an external audio line input
and output. Audio detection can be used to generate
an alarm if needed.
Tamper and motion detection
A wide range of configuration options is available for
alarms signaling camera tampering. A built-in algorithm
for detecting movement in the video can also be used
for alarm signaling.
Edge recording
The SD card slot supports up to 2 TB of storage
capacity. An SD card can be used for local alarm
recording. Pre-alarm recording in RAM reduces
recording bandwidth on the network, or — if SD card
recording is used — extends the effective life of the
storage medium.
Storage management
Recording management can be controlled by the
Bosch Video Recording Manager (VRM) or the camera
can use iSCSI targets directly without any recording
software.
Cloud-based services
The camera supports time-based or alarm-based JPEG
posting to four different accounts. These accounts can
address FTP servers or cloud-based storage facilities
(for example, Dropbox). Video clips or JPEG images
can also be exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS
notification so you are always aware of abnormal
events.
Easy installation
Power for the camera can be supplied via a Powerover-Ethernet compliant network cable connection.
With this configuration, only a single cable connection
is required to view, power, and control the camera.
Using PoE makes installation easier and more costeffective, as cameras do not require a local power
source.
The camera can also be supplied with power from
+12 VDC power supplies. To increase system
reliability, the camera can be simultaneously
connected to both PoE and +12 VDC supplies.
Additionally, uninterruptible power supplies (UPS) can
be used to ensure continuous operation, even during a
power failure.
For trouble-free network cabling, the camera supports
Auto-MDIX which allows the use of straight or crossover cables.
Simple set-up
The camera has a very intuitive user interface that
allows fast and easy configuration. Configurable scene
modes are provided with the best settings for a variety
of applications:
• Indoor – general day-to-night changes in an indoor
environment without sun highlights or street lighting
effects.
• Outdoor – general day-to-night changes in an outdoor
environment with sun highlights and street lighting
effects.
• Traffic – for monitoring traffic movement on roads or
parking lots. It can also be used in industrial
applications where fast moving objects are to be
monitored. Motion artifacts are minimized.
• Night-optimized – optimized for details in low light
environments.
• BLC – optimized for scenes with people moving in
front of a bright background.
• Vibrant – enhanced contrast, sharpness and
saturation.
True day/night switching
The camera incorporates mechanical filter technology
for vivid daytime color and exceptional night-time
imaging while maintaining sharp focus under all
lighting conditions.
Access security
Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels
can be independently AES encrypted with 128-bit keys
by installing the optional encryption site license.
Complete viewing software
There are many ways to access the camera’s features:
using a web browser, with the Bosch Video
Management System, with the free-of-charge
Bosch Video Client, with the video security mobile
app, or via third-party software.
Loading...