u Intelligent noise reduction reduces bandwidth and
storage requirements by up to 30%
The 1080p HD indoor camera is a ready-to-use,
complete network video surveillance system inside a
compact and stylish housing. This camera brings
Bosch’s high-performance technology into the realm of
homes, small office and retail businesses by offering a
cost-effective solution for a broad range of
applications.
System overview
The elegant, compact box design is ideal for homes,
offices, businesses or shops where camera size and
appearance is important. The camera has a 1/2.7-inch
CMOS HD sensor and is a true day/night camera
offering excellent performance day or night.
Functions
Content-Based Imaging Technology
Content-Based Imaging Technology (C-BIT) is used to
radically improve image quality in all lighting
conditions and to identify areas for enhanced
processing. The camera examines the scene using
intelligent video analytics and provides feedback to retune the image processing. This provides better detail
in the areas that matter and better all-round
performance.
u SD card slot for local recording
u FTP, Dropbox and e-mail alarms
iDNR reduces bandwidth and storage requirements
The camera uses intelligent Dynamic Noise Reduction
(iDNR) which actively analyzes the contents of a scene
and reduces noise artifacts accordingly.
The low-noise image and the efficient H.264
compression technology provide clear images while
reducing bandwidth and storage by up to 30%
compared to other H.264 cameras. This results in
reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio.
The average typical optimized bandwidth in kbits/s for
various image rates is shown in the table:
IPS1080p720p480p
3016001200600
151274955478
121169877438
5757568284
2326245122
Page 2
| DINION IP 5000 HD
2
Multiple streams
The innovative multi-streaming feature delivers various
H.264 streams together with an M‑JPEG stream. These
streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video
management systems.
An upright mode can be selected for the second
stream. In this mode an image of 400 x 720 (9:16
aspect ratio) is cropped from the full sensor image.
When the scene to be monitored is suitable to this
mode, the bandwidth and storage requirements are
reduced.
Simultaneous analog and IP video outputs
A surge-protected analog video output ensures that
high resolution IP video streaming and an analog video
output are available simultaneously. This means, for
example, that a confrontation monitor can easily be
connected directly to the camera while still
maintaining full IP functionality.
Regions of interest and E-PTZ
Regions of Interest (ROI) can be user defined. The
remote E-PTZ (Electronic Pan, Tilt and Zoom) controls
allow you to select specific areas of the parent image.
These regions produce separate streams for remote
viewing and recording. These streams, together with
the main stream, allow the operator to separately
monitor the most interesting part of a scene while still
retaining situational awareness.
Built-in microphone, two-way audio and audio alarm
The camera has a built-in microphone to allow
operators to listen in on the monitored area. Two-way
audio allows the operator to communicate with
visitors or intruders via an external audio line input
and output. Audio detection can be used to generate
an alarm if needed.
Tamper and motion detection
A wide range of configuration options is available for
alarms signaling camera tampering. A built-in algorithm
for detecting movement in the video can also be used
for alarm signaling.
Edge recording
The SD card slot supports up to 2 TB of storage
capacity. An SD card can be used for local alarm
recording. Pre-alarm recording in RAM reduces
recording bandwidth on the network, or — if SD card
recording is used — extends the effective life of the
storage medium.
Storage management
Recording management can be controlled by the
Bosch Video Recording Manager (VRM) or the camera
can use iSCSI targets directly without any recording
software.
Cloud-based services
The camera supports time-based or alarm-based JPEG
posting to four different accounts. These accounts can
address FTP servers or cloud-based storage facilities
(for example, Dropbox). Video clips or JPEG images
can also be exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS
notification so you are always aware of abnormal
events.
Easy installation
Power for the camera can be supplied via a Powerover-Ethernet compliant network cable connection.
With this configuration, only a single cable connection
is required to view, power, and control the camera.
Using PoE makes installation easier and more costeffective, as cameras do not require a local power
source.
The camera can also be supplied with power from
+12 VDC power supplies. To increase system
reliability, the camera can be simultaneously
connected to both PoE and +12 VDC supplies.
Additionally, uninterruptible power supplies (UPS) can
be used, which will allow continuous operation, even
during a power failure. For trouble free network
cabling, the cameras support Auto-MDIX.
Simple set-up
The camera has a very intuitive user interface that
allows fast and easy configuration. Six configurable
user modes are provided with the best settings for a
variety of applications:
• Indoor – general day-to-night changes without sun
highlights and street lighting
• Outdoor – general day-to-night changes with sun
highlights and street lighting
• Motion – monitoring traffic or fast moving objects;
motion artifacts are minimized
• Lowlight – optimized for sufficient details at low light.
• BLC – for people moving in front of a bright
background
• Vibrant – enhanced contrast, sharpness and
saturation
True day/night switching
The camera incorporates mechanical filter technology
for vivid daytime color and exceptional night-time
imaging while maintaining sharp focus under all
lighting conditions.
Access security
Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels
can be independently AES encrypted with 128-bit keys
by installing the optional encryption site license.
Page 3
149 (5.87)
45 (1.77)
55 (2.17)
64 (2.52)
113 (4.45)
84 (3.31)
mm (in)
86 (3.39)
14 (0.55)
5 (0.2)
1/4” 20-UNC
| DINION IP 5000 HD
3
Complete viewing software
There are many ways to access the camera’s features:
using a web browser, with the Bosch Video
Management System, with the Bosch Recording
System, with the free-of-charge Bosch Video Client, or
with the video security mobile App.
The Bosch Video Client PC surveillance software offers
a user-friendly interface to support easy installation
and configuration. It also provides easy live viewing of
multiple cameras, playback, forensic search and
export.
Video security App
The Bosch video security mobile App has been
developed to enable Anywhere access to HD
surveillance images allowing you to view live images
from any location. The App is designed to give you
complete control of all your cameras, from panning
and tilting to zoom and focus functions. It’s like taking
your control room with you.
This App, together with the separately available Bosch
transcoder, will allow you to fully utilize our dynamic
transcoding features so you can play back images even
over low-bandwidth connections.
System integration
The camera conforms to the ONVIF (Open Network
Video Interface Forum) Profile S specification. This
guarantees interoperability between network video
products regardless of manufacturer. For trouble-free
network cabling, the camera supports Auto-MDIX
which allows the use of straight or cross-over cables.
Third-party integrators can easily access the internal
feature set of the camera for integration into large
projects. Visit the Bosch Integration Partner Program
(IPP) website (ipp.boschsecurity.com) for more
information.
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398
www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862
latam.boschsecurity@bosch.com
www.boschsecurity.com