Bosch NBN-498-21P, NBN-498-22IP Specsheet

Page 1
Video | NBN-498 Dinion2X Day/Night IP Cameras
NBN-498 Dinion2X Day/Night IP Cameras
www.boschsecurity.com
u 1/3-inch Day/Night CCD with progressive scan
u 20-bit image processing technology
u Wide Dynamic Range, 2X‑dynamic engine and
Dinion2X Day/Night IP cameras are progressive scan CCD cameras. They can quad-stream video simultaneously — on two H.264 streams, an I-frame recording stream, and an M-JPEG stream. Equipped with 20-bit DSP with 2X‑dynamic, they have a wide dynamic range for a sharper, more detailed image with outstanding color reproduction. Features such as multicasting, internet streaming and iSCSI recording are fully supported. Dinion2X Day/ Night IP cameras have built-in video motion detection and additional processing power for video content analysis systems. Supporting the award-winning Dinion2X digital imaging technology, they provide proven, dependable service for the most demanding security and surveillance requirements, day or night.
Functions
Progressive scan
To capture sharp images, even in busy scenes with high motion content, the Dinion camera uses progressive scan technology.
Superior image quality
With a 1/3-inch CCD and Bosch’s advanced digital signal processing, the Dinion2X Day/Night IP camera provides outstanding image quality in virtually all situations. The highly accurate 20-bit digital signal is
u Quad streaming
u Flexible recording options
automatically processed to reveal every detail of the image in both the high and low-light areas of the scene simultaneously.
20-bit Image Processing
The highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. By combining 20-bit image processing and wide dynamic range, the Dinion2X maximizes the information visible in the picture even with strong backlight.
Wide Dynamic Range
The superior wide dynamic range performance for all lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC
Using 2X-Dynamic technology, pixel-by-pixel analysis provides the user with the most detailed information. Turn on SmartBLC to automatically compensate the image without the need for complicated set-up or without compromising dynamic range. Features such as Autoblack and Sharpness further improve the details in a scene, pixel by pixel.
Programmable Modes
Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations.
Page 2
| NBN-498 Dinion2X Day/Night IP Cameras
2
Day/Night switching
In night mode, the camera enhances low light viewing by switching the IR (infrared) filter out of the optical path and providing a monochrome image. The camera can switch from color to monochrome mode automatically by sensing the illumination level, manually via the alarm input, or remotely via a web browser. An internal, through-the-lens IR detector enhances monochrome mode stability by preventing the camera from returning to color mode when IR­illumination is dominant.
Privacy masking
Four different privacy zones allow specific parts of a scene to be blocked. A mask for any part of the scene can be pre-programmed.
Default Shutter
The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.
SensUp Dynamic
By increasing the integration time up to 10 times on the CCD, the effective sensitivity is dramatically enhanced. This is especially useful when relying only on moonlight for illumination.
Efficient bandwidth and storage management
The cameras use H.264 (Main Profile) compression, bandwidth throttling, and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering high image quality and resolution. Bosch's innovative Quad-streaming feature enables the Dinion2X IP to deliver three H.264 streams (two 4CIF streams and an I‑frame only stream) together with an M‑JPEG stream. These four streams facilitate bandwidth-efficient viewing and recording options as well as integration with third-party video management systems. Dinion2X IP cameras offer unparalleled recording options. Attached to the network, they can use iSCSI targets directly without any additional recording software. The recording capabilities of the system can be further enhanced by using the Bosch Video Recording Manager. The camera also supports local recording on a microSD card. This can be used for local alarm recording or for Automatic Network Replenishment (ANR) to improve the overall reliability of video recording.
Standard intelligence
With built-in video content analysis, the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The MOTION+ video motion analysis system, which is built into all camera versions, is the perfect solution for applications where basic video content analysis
features are required. This motion analysis algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper­detection capabilities.
Hardware enhanced
The advanced Intelligent Video Analysis (IVA) option bases the IVA algorithm on digital imaging technology that uses multi-level image analysis of pixels, texture, and object direction.
ONVIF conformance
The camera conforms to the ONVIF (Open Network Video Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. ONVIF conformant devices are able to exchange live video, audio, metadata and control information. They are automatically discovered and connected to network applications such as video management systems.
Unsurpassed flexibility
There are many ways to access the camera’s video: on a PC using a web browser, with the Bosch Video Management System, or with the Bosch Video Client. The camera is also ideal for use with a Divar 700 Series digital video recorder. By routing a video stream to a Bosch video decoder, you can also present the video with ultimate clarity on an analog monitor.
Cost effective, simple installation
Three power options, PoE (Power-over-Ethernet), 24 VAC and 12 VDC are available. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source. To increase system reliability, the camera can be simultaneously connected to both PoE and 12 VDC/24 VAC supplies. Additionally, uninterruptible power supplies (UPS) can be used, which will allow continuous operation, even during a power failure. For trouble free network cabling, the cameras support Auto-MDIX. Dinion IP cameras have a service mode for easy installation using the control buttons and an analog video output on the camera as an alternative to configuration over IP. The service mode is simply activated by pressing a button on the camera. This routes the video to the analog output, bypassing the IP video output. The On-Screen Display (OSD) simplifies back focus adjustment and network configuration, minimizing installation and support costs. The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to maintain proper focus.
Easy Upgrade
Remotely upgrade the camera whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.
Page 3
(2.283)58
(1.339)34
(3.346)85
(4.646)118
(4.803)122
(1.889)48
(2.598)66
1/4"-20 UNC
1/4"-20 UNC
mm (in)
Dinion2X D/N IP
3 | NBN-498 Dinion2X Day/Night IP Cameras
Access Security
Various security levels are available for accessing the network, the camera, and the data channels. As well as password protection with three levels, 802.1x authentication using a RADIUS is supported. To secure Web browser access use HTTPS with a SSL certificate stored in the camera. For total data protection, the video and audio communication channels can be independently AES encrypted with 128‑bit keys by installing the optional Encryption Site License.
Typical applications
• Prisons and correctional facilities
• Traffic monitoring (air, land and sea)
• Hotels, bars and nightclubs
• Commercial and government buildings
• City surveillance and safety
• Border control
Certifications and approvals
Electro Magnetic Compatibility
Emission EN55022 Class B
EN61000-3-2 EN61000-3-3 FCC Part 15
Immunity EN50130-4 (PoE, +12 VDC)
Safety EN60950-1
EN55024 (24 VAC) EN50121-4
UL60950-1 (2nd edition) CAN/CSA-C 22.2 No. 60950-1
Installation/configuration notes
Dimensions
Vibration Camera with 500 g (1.1 lb) lens as per
IEC60068-2-6 (5 m/s2, operational)
Region Certification
Europe CE
USA FCC + UL
Ordering chart
1 N: Network camera 5 1: PAL, 50 Hz
2: NTSC, 60Hz
2 B: Fixed body 6 1: Motion+
2I: IVA enabled
Page 4
1
2
3
E T H
­P o E
4
5
6
DATA
12 VDC 24 VAC
­+
1
2
3
4
5
6
ALARM
AUDIO IN AUDIO OUT
VIDEO
µSD
Dinion2X D/N IP
4 | NBN-498 Dinion2X Day/Night IP Cameras
3 N: Day/Night 7 P: PoE
4 498:Dinion2X
performance
Controls
1 Lens connector 7 Data (RS485/422/232)
2 Control buttons 8 MicroSD card slot
3 Audio in 9 Reset button
4 Audio out 10BNC video output (service
mode)
5 Power supply input 11Alarm in, relay out
6 10/100 Base-T Fast
Ethernet
12 VDC ±10%
Power-over-Ethernet
Current Consumption 550 mA | 650 mA IVA (12 VDC)
550 mA | 650 mA IVA (24 VAC) 200 mA | 250 mA IVA (PoE 48 VDC)
Power Consumption 6.6 W | 7.8 W IVA (12 VDC)
8.2 W | 9.7 W IVA (24 VAC)
9.6 W (PoE 48 VDC)
Sensor
Type 1/3-inch CCD, WDR, dual shutter
Active Pixels (PAL) 752 x 582
Active Pixels (NTSC) 768 x 494
Video
Video compression H.264 (ISO/IEC 14496-10); M-JPEG,
JPEG
Data rate 9.6 Kbps to 6 Mbps
Resolution Horizontal x vertical (PAL/NTSC ips)
4CIF 704 x 576/480 (25/30 ips)
CIF 352 x 288/240 (25/30 ips)
Parts included
Quantity Components
1 NBN-498 Series Dinion2x Day/Night IP Camera
1 Spare lens connector
1 Safety Instructions
1 Quick Install Guide
1 Mini DVD-ROM with manuals, software and tools
1 Power connector
1 Alarm I/O connector
1 Data connector
Lens and microSD card are not included in a standard delivery.
Technical specifications
Electrical
Model No. Rated Voltage Rated Frequency
NBN-498-1xP 24 VAC ±10% 50 Hz
12 VDC ±10%
Power-over-Ethernet
NBN-498-2xP 24 VAC ±10% 60 Hz
Overall IP Delay Min. 120 ms, Max. 240 ms
GOP structure I, IP, IBBP
Frame rate (per stream)
1 to 25/30 (PAL/NTSC) H.264 1 to 25/30 (PAL/NTSC) M-JPEG
Video Out (service mode only)
Signal Analog composite (NTSC or PAL),
service only
Connector BNC, 75 Ohm
Horizontal resolution 540 TVL
Video S/N 50 dB
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Color 2.4 lx
(0.223 fc)
Color + SensUp 10x
0.24 lx (0.0223 f c)
Usable picture (50 IRE)
0.47 lx (0.044 fc)
0.047 lx (0.00437 fc)
Minimum Illumination (30 IRE)
0.15 lx (0.0139 fc)
0.015 lx (0.00139 fc)
Page 5
5 | NBN-498 Dinion2X Day/Night IP Cameras
Monochrome 0.98 lx
(0.091 fc)
Monochrome + SensUp 10x
0.098 lx (0.0091 f c)
0.188 lx (0.0174 fc)
0.019 lx (0.00176 fc)
0.060 lx (0.0056 fc)
0.0060 lx (0.000557 fc)
Day/Night Color, Mono, Auto
Modes 6 preset programmable modes
Dynamic range 120 dB (20-bit image processing)
Signal-to-Noise Ratio > 50 dB
Dynamic engine 2X-Dynamic, XF-Dynamic, SmartBLC+2X-
Dynamic
SmartBLC On (includes 2X-Dynamic ) / Off
AGC AGC On or Off (0 - 30 dB) selectable
White Balance ATW (2500 to 10000K), ATWhold and
manual
Shutter Auto (1/50 [1/60] to 1/10000)
selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Sensitivity up Adjustable from Off up to 10x
Auto Black Automatic continuous, Off
Dynamic Noise Reduction
Sharpness Sharpness enhancement level selectable
Peak White Invert On/Off
Auto, On/off selectable
Audio
Standard G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
Signal-to-noise ratio > 50 dB
Input/output
Audio 1 x mono line in, 1 x mono line out
• connector 3.5 mm stereo jack
• signal line in 9 kohm typical, 5.5 Vpp max
• signal line out 3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm 2 inputs
• connector Clamp (non-isolated closing contact)
• activation voltage
Relay 1 output
• connector Clamp
• voltage 30 VAC or +40 VDC
Data port RS‑232/422/485
+5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull­up resistor)
Maximum 0.5 A continuous, 10VA
Software Control
Unit Configuration Via web browser or Configuration Manager
Flicker Control 50/60 Hz, selectable
Software update Flash ROM, remote programmable
Privacy Masking Four independent areas, fully
programmable
Video Motion Analysis Motion+ or IVA
Test Pattern Generator Color bars 100%, Grayscale 11-step,
Sawtooth 2H, Checker board, Cross hatch, UV plane
Synchronization Internal, Line Lock selectable
Lens Mount CS (max lens protrusion 5 mm, 0.2 inch),
C-mount compatible (with optional adapter ring)
Lens Types Manual, DC- and Video-Iris auto-detect
with override DC-iris drive: max. 50 mA continuous Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous
Controls OSD with soft-key operation (multi-lingual)
Network and Storage
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP
Encryption TLS 1.0, SSL, AES (optional)
Ethernet STP, 10/100 Base-T, auto-sensing, half/
full duplex, RJ45
PoE supply IEEE 802.3af compliant
Local Storage Supports microSD cards (SDHC)
Mechanical
Dimensions (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch)
without lens
Weight 542 g (1.195 lb) without lens
Color RAL 9007 Metallic Titanium
Tripod Mount Bottom (isolated) and top 1/4-inch 20 UNC
Page 6
6 | NBN-498 Dinion2X Day/Night IP Cameras
Environmental
Operating Temperature -20°C to +50°C (-4°F to 122°F)
Extended Operating Temperature*
Operating Temperature (IVA)
Storage Temperature -40°C to +70°C (-40°F to +158°F)
Operating Humidity 20% to 93% RH
Storage Humidity up to 98% RH
-20°C to +55°C (-4°F to 131°F)
-20°C to +45°C (-4°F to 113°F)
* with HAC-IPCCC and UHO outdoor housing with active cooling
Ordering information
NBN-498-11P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264, 2X DSP, WDR, PAL, 50 Hz, PoE, microSD slot
Order number NBN-498-11P
NBN-498-12IP Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264, 2X DSP, WDR, PAL, 50 Hz, PoE, microSD slot, IVA enabled
Order number NBN-498-12IP
NBN-498-21P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264, 2X DSP, WDR, NTSC, 60 Hz, PoE, microSD slot
Order number NBN-498-21P
NBN-498-22IP Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264, 2X DSP, WDR, NTSC, 60 Hz, PoE, microSD slot, IVA enabled
Order number NBN-498-22IP
Accessories
EX12LED‑3BD‑8M Infrared Illuminator
EX12LED IR Illuminator, 850 nm, 30 deg beam
Order number EX12LED-3BD-8M
EX12LED‑3BD‑8W Infrared Illuminator
EX12LED, IR Illuminator, 850 nm, 60 deg beam
Order number EX12LED-3BD-8W
EX12LED‑3BD‑9M Infrared Illuminator
EX12LED IR Illuminator, 940 nm, 30 deg beam
Order number EX12LED-3BD-9M
EX12LED‑3BD‑9W Infrared Illuminator
EX12LED, IR Illuminator, 940 nm, 60 deg beam
Order number EX12LED-3BD-9W
LTC 3664/40 Varifocal Lens IR corrected
1/3-inch, 2.8 – 11 mm, DC-iris, CS-mount F1.4-360, 4­pin
Order number LTC3664/40
LTC 3674/20 Varifocal Lens IR corrected
1/3-inch, 7.5 – 50 mm, DC-iris, CS-mount F1.3-360, 4­pin
Order number LTC 3674/20
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 – 12 mm, DC-iris, C-mount F1.2-360, 4-pin
Order number LTC 3764/20
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount F1.4-360, 4-pin
Order number LTC 3774/30
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
Order number UPA-2410-60
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
Order number UPA-2430-60
UPA-2450-60 Power Supply, 120 V, 60 Hz
Indoor, 120 VAC, 60 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-60
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
Order number UPA-2420-50
UPA-2450-50 Power Supply, 220 V, 50 Hz
Indoor, 220 VAC, 50 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-50
S1374 Adapter
converts C mount lens to CS mount camera
Order number S1374
HAC‑IPCCC Camera Cooling Case
For use with Dinion IP cameras in combination with HSG and UHO Series housings equipped with an optional blower
Order number HAC-IPCCC
Software Options
MVC-FIVA4-CAM
IVA 4.xx/5.xx VCA software license for IP camera/dome (e‑license)
Order number MVC-FIVA4-CAM
LTC 3364/21 Varifocal Lens IR corrected
1/3-inch, 2.8 – 6 mm, DC-iris, CS-mount F1.4-200, 4­pin
Order number LTC3364/21
Page 7
7 | NBN-498 Dinion2X Day/Night IP Cameras
Represented by:
Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:
Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us
Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd. 203 Building, No. 333 Fuquan Road North IBP Changning District, Shanghai 200335 China Phone +86 21 22181111 Fax: +86 21 22182398 www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division Via Anhanguera, Km 98 CEP 13065-900 Campinas, Sao Paulo, Brazil Phone: +55 19 2103 2860 Fax: +55 19 2103 2862 latam.boschsecurity@bosch.com www.boschsecurity.com
© Bosch Security Systems 2015 | Data subject to change without notice 2031142411 | en, V9, 10. Nov 2015
Loading...