Page 1
MIC Series 400 Stainless Steel Camera
Grade 316L stainless steel construction
▶
Rated to an industry leading IP68
▶
Host of mounting and viewing options
▶
Integrated heater and long-life wiper
▶
Multi-protocol operation
▶
The MIC Series 400 stainless steel camera has been
designed to offer an extremely reliable, robust, and high
quality surveillance solution for security applications that
demand the very best performance, regardless of the
installed environment. Precision engineered to exacting
standards, the range offers numerous benefits over the use
of traditional dome and PTZ cameras with a range of options
available to ensure a best-fit solution is achieved.
Rated to an industry leading IP68, the vandal resistant
grade 316L stainless steel camera housing has enhanced
corrosion-resistant properties to provide the ultimate
protection in the harshest of environments, including
marine applications where the salt content of the air is
especially high and constant exposure can dramatically
reduce the lifespan of traditional camera and dome units.
Featuring an optically-perfect flat viewing window and
integrated wiper, the MIC Series 400 stainless steel camera
is able to capture razor-sharp images in even the most
demanding conditions.
The brushless motor technology offers ultra-reliable,
whisper-quiet operation with full 360º continuous rotation
pan and 320º tilt control for exceptional viewing capability.
Small-increment pan/tilt speeds, from just 0.2º per second
to 90º per second, give the user precise control. This speed
control is especially important when used with video
analytic systems, particularly for tracking subjects when
fully zoomed in.
A choice of true day/night camera modules offering up to
36x optical zoom (12x digital) are available, providing either
470 TVL NTSC/PAL typical (18x module) or 530 TVL NTSC/
PAL typical (36x module). When coupled with upright, 45
degree canted, or inverted mounting capability, the
MIC Series 400 stainless steel camera allows the perfect
field of view to be achieved every time.
Functions
Grade 316L stainless steel construction
Anti-corrosion stainless steel construction ensures long-life
and reliable operation in demanding conditions, such as
maritime environments.
Rated to an industry leading IP68
Zero dust ingress and the ability to withstand sustained
periods of immersion under water, the MIC Series 400
stainless steel camera is perfectly suited for installation in
the most unforgiving environments.
Host of mounting and viewing options
Faultless operation, either upright or inverted, gives the
user a host of mounting and viewing possibilities. A canted
option is provided for upright pole-mounted applications,
allowing the base of the pole to be viewed.
Page 2
2 | MIC Series 400 Stainless Steel Camera
Integrated heater and wiper
Hot or cold, rain or shine – regardless of the weather, the
MIC Series 400 stainless steel camera is able to capture the
highest possible quality image all year around thanks to its
integrated, long-life, wiper and heater.
Multi-protocol operation
Compatible with virtually any control equipment available
today, the MIC Series 400 stainless steel camera is able to
seamlessly integrate with the vast majority of security
systems.
Certifications and Approvals
Electromagnetic Compatibility (EMC)
Safety Complies with CE regulations, UL, EN, and IEC
Weatherproofing IP68
Complies with FCC Part 15, ICES-003, and CE
regulations including EN50130-4 ,
EN61000-3-2:2006, EN61000-3-3:1995, and
EN55022:2006 inc AL:2007
Standards 60950-1 & 22
Technical Specifications
Camera Module
Image sensor 1/4‑inch EXview CCD, WDR (36x only)
Horizontal resolution 18x module, 470 TVL NTSC/PAL typical
36x module, 530 TVL NTSC/PAL typical
Filter Automatic mechanical IR cut filter
Focus system Auto or manual
Iris Auto or manual with slow shutter integration
modes
Synchronization Internal / External (V‑Lock)
Signal/Noise ratio 50 dB or more
Back Light Compensation
(BLC)
White balance Automatic
Automatic Gain Control
(AGC)
Aperture control 16 Steps
18x Optical Zoom Module
Lens F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to
Zoom 18x optical (12x digital)
Angle of view 48° (wide) to 2.8° (tele)
Minimum illumination 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)
Shutter speed 1/1 to 1/10,000 s (22 steps) NTSC, PAL
On/Off
-3 to -28 dB, 2 dB steps
F3.0
0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)
0.01 lux (F1.4, 1/4s NTSC, 1/3s PAL ICR on)
36x Optical Zoom Module
Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to
F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8° (wide) to 1.7° (tele)
Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical, F1.6,
50IRE)
0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,
50IRE)
ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)
Shutter speed 1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to
1/10,000 s (20 steps) PAL
Operational
Auto flip Yes
Manual flip Yes
Dynamic privacy zones Standard, 3D privacy masking with infinite
zones
Presets 64 telemetry presets utilizing resolver technol-
ogy (using FV protocol, 10 camera set-up presets to allow ANPR, color correction etc.)
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 presets
Home position Yes (preset 1 or tour)
Communication and Protocols
Communication RS485 / RS422
Control protocol Bosch or FV protocol cameras available; addi-
tional protocols supported are Pelco D, Kalatel,
360 Vision, American Dynamics, Panasonic,
Molynx, VCL, and Vicon.
These can be loaded using the MICUSB485CVTR signal converter and Cam-set via
a PC.
Biphase control requires a Biphase to RS485
converter (MIC-BP4, available separately) installed in the MIC Series PSU to connect to Biphase equipment.
Connectivity
Video Co-axial via composite cable
Telemetry Twisted pair. Simplex, half and full duplex op-
eration via composite cable
MIC Universal Camera
Setup Software Utility
(Cam-set)
USB to RS485 signal converter
Power Via composite cable
Supplied with each camera, Cam-set allows direct connection to a USB equipped PC via the
MIC Series PSU or over a full duplex or IP network
to provide access to all camera functions and
useful diagnostic tools
Allows MIC Series cameras to connect to a PC
(supplied free with MIC Series 400 stainless
steel camera or available separately)
Page 3
MIC Series 400 Stainless Steel Camera | 3
Alarms
Alarm inputs 1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication Tamper switch (ground connection)
Mechanical
Drive unit Brushless integral pan/tilt motor drive
Pan angle 360° continuous rotation
Pan speed Up to 90° per second (variable)
Tilt angle 320°
Tilt speed 0.2° to 90° per second (variable)
Speed control Closed loop electronics
Preset accuracy Better than 0.08°
Proportional P/T to zoom Yes
Construction
Construction material Grade 316L stainless steel
Viewing window Tempered flat glass
Window wiper Standard, long-life silicone wiper
Heater Standard
Standard colors Stainless Steel (no color options)
Standard finish Stainless Steel (no finish options)
Dimensions 205(W) x 360(H) x 165(D)mm (upright and in-
verted)
Weight 16.5Kg (including 4-inch PCD base)
Configurations available Upright mount or upright canted at 45° mount.
(Inverted mount is possible using software setting and upright camera.)
Environmental
Operational temperature -40°C to +50°C (-40 °f to +122 °f)
Weatherproofing IP68
Electrical
Input voltage 18 VAC
Power consumption 25.2 W max. (with heater off)
37 W max. (with heater on)
Ordering Information
MIC400STSCW13518P MIC Series 400
Stainless Steel
Stainless steel, 18X, PAL, PTZ camera, Canted, FV Protocol with integrated wiper, heater
and privacy function
MIC400STSCW13536P MIC Series 400
Stainless Steel
Stainless steel, 36X, PAL, PTZ camera, Canted, FV Protocol with integrated wiper, heater
and privacy function
MIC400STSUW13518P MIC Series 400
Stainless Steel
Stainless steel, 18X, PAL, PTZ camera, Upright, FV Protocol with integrated wiper, heater
and privacy function
MIC400STSUW13536P MIC Series 400
Stainless Steel
Stainless steel, 36X, PAL, PTZ camera, Upright, FV Protocol with integrated wiper, heater
and privacy function
MIC400STSCP13518N MIC Series 400
Stainless Steel
Stainless steel, 18X, NTSC, PTZ camera, Canted, Bosch Protocol with integrated wiper, heater and privacy function
MIC400STSCP13536N MIC Series 400
Stainless Steel
Stainless steel, 36X, NTSC, PTZ camera, Canted, Bosch Protocol with integrated wiper, heater and privacy function
MIC400STSUP13518N MIC Series 400
Stainless Steel
Stainless steel, 18X, NTSC, PTZ camera, Upright, Bosch Protocol with integrated wiper,
heater and privacy function
MIC400STSUP13536N MIC Series 400
Stainless Steel
Stainless steel, 36X, NTSC, PTZ camera, Upright, Bosch Protocol with integrated wiper,
heater and privacy function
Accessories
MIC-24PSU-UL 24 VAC Camera Power
Supply
24 VAC, 50/60 Hz power supply for MIC Series
cameras
MIC-115PSU-UL 115 VAC Camera Power
Supply
115 VAC, 60 Hz power supply for MIC Series
cameras
MIC-240PSU-UL 240 VAC Camera Power
Supply
240 VAC, 50 Hz power supply for MIC Series
cameras
MIC-BP4 Bi-phase Converter
Bi-Phase converter for non-IR versions of MIC
series power supply units
MIC400STSCW135
18P
MIC400STSCW135
36P
MIC400STSUW135
18P
MIC400STSUW135
36P
MIC400STSCP1351
8N
MIC400STSCP1353
6N
MIC400STSUP1351
8N
MIC400STSUP1353
6N
MIC-24PSU-UL
MIC-115PSU-UL
MIC-240PSU-UL
MIC-BP4
Page 4
4 | MIC Series 400 Stainless Steel Camera
Ordering Information
MIC‑DCA‑S Deep Conduit Adapter
Deep conduit adapter for 4 in. PCD base - grade
316 stainless steel, plain finish
MIC‑SCA‑S Shallow Conduit Adapter
Shallow conduit adapter for 4 in. PCD base grade 316 stainless steel, plain finish
MIC-SPR-S Spreader Plate
316L stainless steel spreader plate suitable for
brickwork surface mounting; plain finish
MIC-CMB-S Corner Mount Bracket
Corner mount bracket - grade 316 stainless
steel
MIC-PMB Pole Mount Bracket
Pole mount bracket (includes 2 x 455 mm
banding ties for pole diameters 75 to 145 mm
MIC‑WMB‑S Wall Mount Bracket
Wall mount bracket - grade 316 stainless steel
(requires MIC‑SPR or MIC‑PMB for secure
mounting due to weight)
MIC-USB485CVTR USB to RS485 Signal
Converter
MIC-ALM Alarm and Washer Pump Drive
Card
8 Input alarm and washer pump drive card for
PSU (Not for IR PSU)
MIC-WKT Washer Kit
Washer kit for non infrared MIC models (includes washer pump drive card, washer nozzle
and mounting brackets for wall and 4 in. PCD
base)
HAC-WAS05-20 24 VAC Washer
24 VAC washer inst. 5M 25L
UPA-2450-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 50 VA Out
UPA-2450-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 50 VA Out
MIC-2M-S 2 m Shielded Composite Cable
Shielded Composite 2 m cable that provides
power, telemetry and video connection from a
MIC Series camera to a MIC Series power supply
MIC-10M-S 10 m Shielded Composite Cable
Shielded Composite 10 m cable that provides
power, telemetry and video connection from a
MIC Series camera to a MIC Series power supply
MIC-20M-S 20 m Shielded Composite Cable
Shielded Composite 20 m cable that provides
power, telemetry and video connection from a
MIC Series camera to a MIC Series power supply
MIC-DCA-S
MIC-SCA-S
MIC-SPR-S
MIC-CMB-S
MIC-PMB
MIC-WMB-S
MIC-USB485CVTR
MIC-ALM
MIC-WKT
HAC-WAS05-20
UPA-2450-50
UPA-2450-60
MIC-2M-S
MIC-10M-S
MIC-20M-S
Ordering Information
MIC-25M-S 25 m Shielded Composite Cable
Shielded Composite 25 m cable that provides
power, telemetry and video connection from a
MIC Series camera to a MIC Series power supply
MIC-25M-S
Loading...