Bosch LBC3941-11 Specsheet

0 (0)
Bosch LBC3941-11 Specsheet

Communications Systems | Sound projector, 6W

LBC3941/11 Sound projector, 6W

www.boschsecurity.com

u Excellent speech and music reproduction

u Very wide opening angle

u Modern unobtrusive styling

u Simple power setting

u Water and dust protected according to IP65

The LBC 3941/11 is a 6 W cost-effective sound projector. It features a very wide opening angle and unobtrusive styling. Water and dust protection to IP 65 make it suitable for indoor and outdoor use.

Functions

The sound projector features a very wide opening angle (90 degrees) which means fewer units are required to cover a given area. Its wide frequency range also results in better speech and music reproduction, while the directivity ensures that the sound is accurately projected to where it is needed most.

The LBC 3941/11 sound projector is finished in an attractive white color, and its unobtrusive appearance complements today’s interior lighting. The color and styling of the front grille matches an existing Bosch ceiling loudspeaker (LBC 3951/11).

Certifications and approvals

All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times

their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.

The enclosures are made from high-impact selfextinguishing ABS (according to class UL 94 V0).

Safety

 

acc. to EN 60065

 

 

 

Water and dust protection

acc. to EN 60529, IP 65

 

 

 

 

Self-Extinguishing

 

acc. to UL 94 V0

 

 

 

 

 

 

Region

 

Regulatory compliance/quality marks

 

 

 

 

Europe

 

CE

 

 

 

 

 

Installation/configuration notes

The sound projector is supplied with an aluminium mounting bracket painted in white. The bracket has three 10 mm holes, which can be used to easily mount the projector to walls and ceilings. The direction of the projector can be adjusted by means of two screws covered with white plastic covers. The unit is supplied with a 2 m color-coded five-core cable, with each color connected to a different primary tap on the matching

Loading...
+ 2 hidden pages