Bosch Appliances HGS3063UC User Manual
Use and Car e Manual
Guide d’utilisation et d’entretien
Ins trucciones para usar y Cuidar
Electric Ranges
Gas Ranges
Cuisinière à gaz
fr
es
Estufa a Gas
Table of Contents
About This Manual . . . . . . . 1
How This Manual is Organized . . . . . . . . . . 1
Safety . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . 2
LP Conversion . . . . . . . . . . . . . . . . . . . . . . . 5
Getting Started . . . . . . . . . . 6
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 7
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Before Using the Oven for the First Time . 9
Getting the Most Out of Your
Appliance . . . . . . . . . . . . . . 10
General Tips . . . . . . . . . . . . . . . . . . . . . . . . 10
Preheating the Oven . . . . . . . . . . . . . . . . . . 10
Adjusting the Oven Temperature . . . . . . . . . 10
Rack Positions . . . . . . . . . . . . . . . . . . . . . . . 11
Operation . . . . . . . . . . . . . . 12
About the Appliance . . . . . . . . . . . . . . . . . . . 12
Operating the Oven . . . . . . . . . . . . . . . . . . 12
Bake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Broil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Convection . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating the Gas Cooktop. . . . . . . . . . . . 15
Using Proper Cookware . . . . . . . . . . . . . . . . 16
Setting Proper Burner Flame Height . . . . . . 16
Setting Surface Controls. . . . . . . . . . . . . . . . 16
Setting a Surface Burner . . . . . . . . . . . . . . . 17
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the Clock . . . . . . . . . . . . . . . . . . . . . 17
Temperature Conversion . . . . . . . . . . . . . . . 17
Setting a Silent Control Panel . . . . . . . . . . . . 18
Setting Oven Lockout . . . . . . . . . . . . . . . . . . 18
Setting the Minute Timer. . . . . . . . . . . . . . . . 18
Cleaning and Maintenance 19
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Self-Clean . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Avoid These Cleaners . . . . . . . . . . . . . . . . . 20
Cleaning Guide . . . . . . . . . . . . . . . . . . . . . . 20
Cooktop Cleaning and Maintenance. . . . . . . 21
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22
Replacing an Oven Light . . . . . . . . . . . . . . . 22
Removing the Oven Door . . . . . . . . . . . . . . 23
Service . . . . . . . . . . . . . . . .25
Before Calling Service . . . . . . . . . . . . . . . . 25
Troubleshooting Chart . . . . . . . . . . . . . . . . . 25
Data Plate . . . . . . . . . . . . . . . . . . . . . . . . . . 27
How to Obtain Service or Parts . . . . . . . . . . 27
STATEMENT OF LIMITED PRODUCT
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . 28
BSH Home Appliances Corporation
5551 McFadden Ave.
Huntington Beach, CA 92649
Questions?
1-800-944-2904
www.boschappliances.com
We look forward to hearing from you!
About This Manual
How This Manual is Organized
You can get the most out of your new oven by reading this
manual from beginning to end. This way, you will
systematically get to know your appliance and become
familiar with its operation and features.
The manual consists of the following sections:
•The “Safety” section provides information on how to
safely operate your oven.
•“Getting Started" introduces you to the oven
components and features.
•The "Operation" section offers you step-by-step
instructions on how to operate your oven.
•In "Getting the Most Out of Your Appliance" you can
find a list of many common foods with the appropriate
oven mode, temperature, rack position and bake time.
This section also provides you with several bakeware
and preparation tips.
•"Cleaning and Maintenance" provides you with
information on how to clean and care for the various
oven parts.
•The "Service" section includes your warranty and do-it-
yourself troubleshooting tips.
• Pay special attention to the important safety
instructions in the "Safety" section.
English 1
Safety
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
WARNING:
When properly used and cared for, your new
appliance has been designed to be safe and
reliable. Read all instructions carefully before
use. These precautions will reduce the risk of
burns, electric shock, fire and injury to
persons. When using kitchen appliances,
basic safety precautions must be followed,
including those in the following pages.
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded by a
qualified technician. Connect only to a properly grounded
outlet. Refer to the Installation Instructions for details..
WARNING:
• All ranges can tip.
• Injury to persons could result.
• Install anti-tip device packed with range.
• See installation instructions.
intended only for heated food preparatoin and should not
be used for any other purposes.
Do not operate this appliance if it is not working properly, or
if it has been damaged. Contact an authorized servicer.
Do not obstruct oven vents.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
In the event of an error, the display flashes and beeps
continuously. If this happens during self-clean, disconnect
appliance from the power supply and call a qualified
technician.
In the event of an error, the display flashes and beeps
continuously. Disconnect appliance from the power supply
and call a qualified technician.
Be sure your appliance is properly installed and grounded
by a qualified technician in accordance with the National
Fuel Gas Code ANSI Z223.- latest edition, or in Canada,
CAN/CGA B149.1, and CAN/CGA B149.2, and National
Electrical Code ANSI/NFPA No.70 - latest edition, or in
Canada CSA Standard C22.1, Canadian Electrical Code,
Part 1 and local code requirements.
This appliance is intended for normal household use only. It
is not approved for outdoor or other non-household uses
(including sea or air-going vessels). See the Statement of
Limited Warranty. If you have any questions, contact the
manufacturer.
Do not store or use corrosive chemicals, vapors, flammables
or nonfood products in or near this appliance. The use of
corrosive chemicals in heating or cleaning will damage the
appliance and could result in injury. This appliance is
English 2
Gas Safety
Warning:
NEVER cover any slots, holes or passages in
the oven or cover an entire rack with
aluminum foil. Doing so blocks air flow
through the oven and may cause carbon
monoxide poisoning. Aluminum foil linings may also trap
heat, causing a fire hazard.
Warning:
If the information in this manual is not
followed exactly, a fire or explosion may result
causing property damage, personal injury or
death.
Do not store or use combustible materials, gasoline or
other flammable vapors and liquids in the vicinity of this
or any other appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call fire
department.
Installation and service must be performed by a qualified
installer, authorized service agency or the gas supplier.
Warning:
Use this appliance only for its intended use as
described in this manual. NEVER use this
appliance as a space heater to heat or warm
a room. Doing so may result in carbon
monoxide poisoning and overheating the appliance.
Never use the appliance for storage
For proper burner performance, keep igniters clean and
dry.
If a burner goes out and gas escapes, open windows and
doors. Wait until gas dissipates before using the appliance.
Fire Safety
Do not use aluminum foil or protective liners to line any part
of the appliance, especially the oven bottom. Installing these
liners may result in risk of electric shock or fire.
If materials inside an oven should ignite, keep door closed.
Turn off the appliance and disconnect the circuit at the circuit
breaker box.
Use this appliance only for its intended purpose as
described in this manual. For example, never use the
appliance for warming or heating the room. Never use the
appliance for storage.
Always have a working smoke detector near the kitchen.
Have the installer show you where the gas shut-off valve is
located.
If a burner goes out and gas escapes, open windows and
doors. Wait until gas dissipates before using the appliance.
If you smell gas, your installer has not done a proper job of
checking for leaks. If the connections are not perfectly tight,
you can have a small leak and, therefore, a faint smell.
Finding a gas leak is not a "do-it-yourself" procedure. Some
leaks can only be found with the burner control in the ON
position and this must be done by a qualified service
technician.
In the event that personal clothing or hair catches fire, drop
and roll immediately to extinguish flames.
Have an appropriate fire extinguisher available, nearby,
highly visible and easily accessible near the oven.
Smother flames from food fires other than grease fires with
baking soda. Never use water on cooking fires.
Air curtain or other overhead range hoods, which operate by
blowing a downward air flow onto a range, shall not be used
in conjunction with gas ranges other than when the hood
and range have been designed, tested and listed by an
independent test laboratory for use in combination with each
other.
English 3
vapors may catch fire in the oven. Use only small quantities
of alcohol in foods, and open the oven door carefully.
WARNING:
TO REDUCE THE RISK OF PERSONAL
INJURY IN THE EVENT OF A GREASE FIRE,
OBSERVE THE FOLLOWING:
• SMOTHER FLAMES with a close-fitting
lid, cookie sheet, or metal tray, then turn
off the burner. EXERCISE CAUTION TO
PREVENT BURNS. If the flames do not go
out immediately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
• NEVER PICK UP A FLAMING PAN—You
may be burned.
• DO NOT USE WATER, including wet rags
or towels—a violent steam explosion will
result.
• Use an extinguisher ONLY if:
1) You know you have a CLASS ABC
extinguisher and you already know
how to operate it.
2) The fire is small and contained in the
area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to
an exit.
Burn Prevention
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN — Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing, potholders, or other
flammable materials contact heating elements or interior
surfaces of oven until they have had sufficient time to cool.
Other surfaces of the appliance may become hot enough to
cause burns. Among these surfaces are oven vent
openings, surfaces near these openings and oven doors.
Always place oven racks in desired location while oven is
cool. If a rack must be moved while oven is hot, do not let
potholder contact the heating elements.
Always use dry potholders. Moist or damp potholders on hot
surfaces may result in burns from steam. Do not let potholder
touch hot heating elements. Do not use a towel or other bulky
cloth.
Secure all loose garments, etc. before beginning. Tie long
hair so that it does not hang loose, and do not wear loose
fitting clothing or hanging garments, such as ties, scarves,
jewelry, or dangling sleeves.
Child Safety
When children become old enough to use the appliance, it is
the legal responsibility of the parents or legal guardians to
ensure that they are instructed in safe operation of the
appliance by qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on any
part of an appliance, especially a door, warming drawer or
storage drawer. This can damage the appliance, and the unit
may tip over, potentially causing severe injury.
Do not allow children to use this appliance unless closely
supervised by an adult. Children and pets should not be left
alone or unattended in the area where the appliance is in
use. They should never be allowed to play in its vicinity,
whether or not the appliance is in use.
CAUTION:
Items of interest to children should not be stored in an
appliance, in cabinets above an appliance or on the
backsplash. Children climbing on an appliance to reach items
could be seriously injured.
Cleaning Safety
Exercise caution when opening the appliance. Standing to
the side, open the door slowly and slightly to let hot air and/
or steam escape. Keep your face clear of the opening and
make sure there are no children or pets near the unit. After
the release of hot air and/or steam, proceed with your
cooking. Keep doors shut unless necessary for cooking or
cleaning purposes. Do not leave open doors unattended.
Do not heat or warm unopened food containers. Build-up of
pressure may cause the container to burst and cause injury.
Use caution when cooking foods with high alcohol content
(e.g. rum, brandy, bourbon) in the oven. Alcohol evaporates
at high temperatures. There is a risk of burning as the alcohol
English 4
Do not clean the appliance while it is still hot. Some cleaners
produce noxious fumes when applied to a hot surface. Wet
cloths or sponges can cause burns from steam.
IMPORTANT SAFETY NOTICE: The California Safe
Drinking Water and Toxic Enforcement Act requires the
Governor of California to publish a list of substances known
to the state to cause cancer, birth defects or other
reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
The burning of gas cooking fuel and the elimination of soil
during self-cleaning can generate some by-products which
are on the list. To minimize exposure to these substances,
always operate this unit according to the instructions
contained in this booklet and provide good ventilation.
When self-cleaning, confirm that the door locks and will not
open. If the door does not lock, stop self clean operation and
contact service.
Wipe out excessive spillage before self-cleaning the oven.
Birds have very sensitive respiratory systems. Keep pet birds
out of the kitchen or other rooms where kitchen fumes could
reach them. During self-clean, fumes are released that may
be harmful to birds. Other kitchen fumes such as overheating
margarines and cooking oils may also be harmful.
Keep oven free from grease build up.
Cookware Safety
Do not place food directly on oven bottom.
Follow the manufacturer's directions when using cooking or
roasting bags.
Do not clean parts or accessories in the self-clean oven.
Conversion to Liquified Petroleum Gas
Warning:
Personal injury or death from electrical shock
may occur if the range is not installed by a
qualified installer or electrician.
WARNING:
Avoid fire hazard or electrical shock. Do not
use an adapter plug, an extension cord, or
remove grounding prong from electrical
power cord. Failure to follow this warning can
cause serious injury, fire or death.
This appliance is equipped with a 3-prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. DO NOT
cut or remove the grounding prong from this
plug.
For personal safety, the range must be
properly grounded. For maximum safety, the
power cord must be plugged into an electrical
outlet that is correctly polarized and properly
grounded.
If a 2-prong wall receptacle is the only
available outlet, it is the personal
responsibility of the consumer to have it
replaced with a properly grounded 3-prong
wall receptacle installed by a qualified
electrician.
Any additions, changes or conversions required in order
for this appliance to satisfactorily meet the application
needs must be made by a qualified technician.
If your gas range model is designed to allow for L.P.
conversion, the L.P. conversion kit may be obtained from
your local appliance dealer and should be installed by a
qualified service technician. Before installing the kit be sure
to follow the L.P. Installation Instructions carefully.
English 5
Getting Started
Parts
Oven Vent
Control Panel
Convection Fan
Door Lock
Door Hinge
Rack Position Guides
with 6 Rack Positions
Oven Bottom
Oven Vent
The oven vent is located under the center of the control
panel. When the oven is on, warm air passes through this
vent. This venting is necessary for proper air circulation in
the oven and good baking results. Do not block the oven
vent since it is important for air circulation. It is normal to
see steam escaping from the vent, and condensation may
collect in this area. This area may be warm when the oven
is in use.
English 6
Convection Fan (some models)
The convection fan operates during the convection mode.
When the oven is operating in a convection mode, the fan
turns off automatically when the door is opened. The
convection fan will take 6 minutes to begin rotating once
the convection switch has been turned on.
Oven Bottom
The oven bottom conceals the lower heating burner. As a
result the burner is protected from damage and spills.
Accessories
Rack
Note:
Do not place food directly on the oven bottom.
WARNING:
Do not use aluminum foil or protective liners
to line any part of the appliance, especially
the oven bottom. Installation of these liners
may result in a risk of fire.
Cooktops
300 Series
Flat Oven Rack
This rack can be used for
all cooking needs. Do not
clean in the self-clean
oven. Your oven comes
with two flat oven racks.
CAUTION:
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not
let oven mitts contact hot heating elements.
Use caution when removing oven racks from
the lowest rack position to avoid contact with
the hot oven door.
To avoid possible injury or damage to the
appliance, ensure racks are installed exactly
per installation instructions and not
backwards or upside down.
500 Series
REMOVE ALL OVEN RACKS and parts
before starting a self-clean cycle. If the
oven racks are left in the oven and remain in
the oven cavity for a self-clean cycle, the
glide ability of the oven rack system will be
damaged and will cause all oven racks to
loose their shiny finish and or turn blue.
Remove ALL oven racks and clean
according to instructions provided in the Care
& Cleaning section of this manual.
Removing and Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front
of rack and slide out. To replace, fit the rack onto the
guides on the oven walls. Tilt the front of the rack upward
and slide the rack back into place.
English 7
Control
300 Series (models without convection bake)
500 Series (models with convection bake)
Oven
Light
Self
Clean
Clock
Timer
On/Off
Cook
Time
Start
Time
12 : 00
Oven
Preheat
Door Locked
Bake Broil
Clear
Convection
/Off
English 8
Control Keypads Control Indicator Lights
Use to turn the interior oven light ON
or OFF.
Use to set the time of day.
Used to enter the length of cooking
time needed.
Use to set a Self-Clean cycle.
Use to set or cancel the minute timer.
The minute timer does not start or
stop cooking.
Use to select the bake feature.
Light will glow each time the oven
Note: All other indicator lights on the oven control are feature ON/OFF indicator lights.
turns on to maintain the set oven
temperature.
Light will glow when the oven is first
set to operate, or if the desired
temperature is reset higher than the
actual oven temperature.
Light will flash when the oven door
locks and unlocks, the oven door
lockout is active or when the SelfClean cycle feature is active.
Before Using the Oven for the
Use to select the variable broil
feature.
Door Lock icon pad activates oven
door lockout settings.
Convection is similar to Bake. Heat
comes from the lower burner and the
heat is circulated by a convection fan
(some models).
Use with the feature or function pads
to set oven temperature, bake time,
start time (when programming an
automatic start time), setting or
adjusting the clock and minute timer.
First Time
• Oven must be properly installed by a qualified
technician before use.
• Remove all packing materials from inside and outside
the oven.
• While cool, wipe with a clean, damp cloth and dry.
• There may be a slight odor during first uses; this is
normal and will disappear.
• Optimum cooking results depend on proper cookware
being used.
• Read and understand all safety precautions and Use
and Care Manual information prior to operating.
Use to clear any feature previously
entered except the time of day and
minute timer. Press Clear/Off to stop
cooking.
English 9
Getting the Most Out of Your Appliance
General Tips
Pan Placement
Baking results are better if pans are placed in the center of
the oven. If baking more than one pan on a rack, allow at
least 1" to 1 ½" of air space around the pan. When baking
four cake layers at the same time, stagger pans on two
racks so that one pan is not directly above the other. See
Baking Layer Cakes with 1 or 2 racks.
Baking Pans and Dishes
• Glass baking dishes absorb heat. Follow
manufacturers' recommendations.
• For tender, light, golden brown crusts, use light, shiny
metal bakeware.
• Dark, rough or dull pans (nonstick or anodized) will
absorb heat and result in a browner, crisper crust.
Some manufacturers recommend reducing the
temperature 25 ºF when using this type of pan. Follow
manufacturers' recommendations.
• Insulated cookie sheets or bakeware may increase the
length of cooking time.
• Do not set any heavy objects on the open oven door.
• Do not keep the empty bakeware in the oven during
cooking as this changes cooking performance.
Aluminum Foil
Do not use aluminum foil or protective liners to line any part
of the appliance, especially the oven bottom. Installing
these liners may result in risk of electric shock or fire.
Preheating the Oven
• Place oven racks in desired position before heating the
oven.
• Preheat the oven in all cooking modes.
• Allow oven to preheat while preparing recipe
ingredients or food items.
• Setting a higher temperature does not shorten preheat
time.
• Once oven is preheated, place food in the oven as
quickly as possible to minimize the loss of heat and
reduction of oven temperature.
Adjusting the Oven Temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first frew
uses, follow your recipe times and temperature
recommendations carefully. If you think that the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so that the oven cooks hotter or cooler
than the temperature displayed.
To adjust oven temperature:
1. Press “BAKE”.
2. Set the temperature to 550°F (287°C) by pressing and
holding the “+”.
3. Within 2 seconds, press and hold “BAKE” until the 2
digit display appears. Release “BAKE” . The display
now indicates the amount of degrees offset between
the original factory temperature setting and the current
temperature setting. If the oven control has the original
factory calibration, the display will read "0".
4. The temperature can now be adjusted up or down 35°F
(19°C), in 5°F steps by pressing and holding the “+” or
“-”. Adjust until the desired amount of offset appears in
the display. When lowering the oven temperature, a
minus sign (-) will appear before the number to indicate
that the oven will be cooler by the displayed amount of
degrees.
5. When you have made the desired adjustment, press
“Clear/Off” to go back to the time of day display.
For Best Results
• Open the door as briefly as possible to avoid
temperature reduction.
• Use the interior oven light to view the food through the
oven window rather than opening the door frequently.
• Use the Timer to keep track of cooking times.
High Altitude Baking
• When cooking at high altitudes, recipes and cooking
times will vary.
For accurate information, write the Extension Service,
Colorado State University, Fort Collins, Colorado
80521. There may be a cost for the guides. Specify
which high altitude food preparation guide you prefer:
general information, cakes, cookies, breads, etc.
English 10
Condensation
• It is normal for certain amount of moisture to evaporate
from the food during any cooking process. The amount
depends on the moisture content of the food. The
moisture may condense on any surface cooler than the
inside of the oven, such as the control panel.
Recommended Rack Positions for Broiling, Baking & Roasting
Food Rack Position
Broiling hamburgers and
steaks
5 or 6
Operating the Oven Light
The interior oven light will automatically turn ON when the
oven door is opened.
Press “Oven Light” to turn the interior oven light ON and
OFF whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield held
by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven light, see Replacing an Oven
Light in the Maintenance section.
Broiling meats, chicken or
fish
Cookies, cakes, pies,
biscuits and muffins
Frozen pies, angel food
cake, yeast, bread,
casseroles, small cuts of
meat or poultry
Turkey or ham 1
4 or 5
2 or 3
2 or 3
6
5
4
3
2
1
Rack Positions
English 11
Operation
BAKE
About the Appliance
Behind the classic design is modern and perfected
technology that ensures a high degree of efficiency. For
instance, we have further improved the distribution of heat
in the oven by using newly designed elements. The
advantage of this results in shorter cooking times, perfect
results and lower energy costs.
This oven is very convenient and easy to operate, even
with the wide variety of options. The cooking mode and
temperature can be adjusted with very little effort. The
additional functions such as Cook Time can be set at the
touch of a button in just a few seconds, and the display
always presents the most important information while you
are cooking.
Operating the Oven
Baking layer cakes with 1 or 2 oven racks
Bake
Bake is cooking with dry, heated air.
The lower burner cycles to maintain
the oven temperature.
The Bake mode can be used to prepare a variety of food
items, from pastries to casseroles. Refer to recipe or
package directions for oven temperature and baking time.
Tips
• Preheat the oven if the recipe recommends it.
• Baking time will vary with the size, shape and finish of
the bakeware. Dark metal pans or nonstick coatings
will cook faster with darker results. Insulated bakeware
will lengthen the cook time for most foods.
• For best results, bake food on a single rack with at
least 1-1
walls.
• Eliminate heat loss from the oven by using the window
to periodically check food for doneness instead of
opening the door.
1
/2" space between pans or dishes and oven
For best results when baking cakes using 2 oven racks,
place bakeware on rack positions 2 & 5 (See Fig. 2). For
best results when using a single oven flat rack, place
bakeware on rack positions 2 or 3 (See Fig. 1).
Fig. 1 Fig. 2
If multiple racks are necessary, use a maximum of 2 racks.
For cakes and cookies use rack positions 2 and 5. Stagger
cake pans so that one is not directly above the other (see
graphic above). See "Pan Placement" under "General Tips"
for more info. You may also consider using a convection
mode.
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C). The factory preset
automatic bake temperature is 350°F (177°C).
To set bake
1. Press “BAKE”. "— — —" appears in the display.
2. Within 5 seconds, press the “+” or “-”. The display will
show "350°F (177°C)." By pressing and holding the “+”
or “-”, the temperature can then be adjusted in 5°F
increments (1°C if the control is set to display Celsius).
3. As soon as the “+” or “-” pad is released, the oven will
begin heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel bake, press “Clear/Off”.
To change the oven temperature after bake has
started:
1. Press “BAKE”. Visually check the bake temperature
and that it needs to be changed.
2. Press the “+” or “-” pad to increase or decrease the set
temperature to the desired new oven temperature.
English 12
Note: The OVEN indicator light on the electronic display
will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the
oven is cycling to maintain the selected baking
temperature. When the preheat indicator light turns
OFF, your oven is ready.
Setting timed bake and delayed timed bake features
The “BAKE” and “START TIME” pads operate the features
that will turn the oven ON and OFF at the times you select
in advance. The oven can be programmed to start
immediately and shut off automatically (timed bake) or to
begin baking at a later time with a delayed start time
(delayed timed bake).
begin heating.
When the set bake time runs out
1. "END" will appear in the display window and the oven
will shut-off automatically.
2. The control will beep 3 times every 60 seconds as a
reminder until “Clear/Off” is pressed.
To change the oven temperature or bake time after baking has started
1. Press the function pad you want to change.
2. Press the “+” or “-” to adjust the setting.
Note: During timed bake the preheat indicator light will not
function until the set time to start cooking is reached.
To program the oven to begin baking immediately and to shut off automatically (timed bake)
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press “BAKE”. " — — — ° " appears in the display.
4. Within 5 seconds, press the “+” or “-”. The display will
show "350°F (177°C)." By holding the“+” or “-”, the
temperature can then be adjusted in 5°F increments
(1°C if the control is set to display Celsius).
5. Press “COOK TIME”. ":00" will flash in the display.
6. Press the “+” or “-” until the desired baking time
appears in the display.
7. The oven will turn ON and begin heating.
To program oven for a delayed start time and to shutoff automatically (delayed Timed Bake):
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press “BAKE”. " — — — ° " appears in the display.
4. Within 5 seconds, press the “+” or “-”. The display will
show "350°F (177°C)." By holding the “+” or “-”, the
temperature can then be adjusted in 5°F increments
(1°C if the control is set to display Celsius).
5. Press “COOK TIME”. ":00" will flash in the display.
6. Press the “+” or “-” until the desired baking time
appears.
7. Press “START TIME”. The earliest possible start time
will appear in the display.
8. Press the “+” or “-” until the desired start time appears
in the display.
9. Once the controls are set, the control calculates the
time when baking will stop in order to start at the time
you have set.
10. The oven will turn ON at the delayed start time and
CAUTION:
Use caution with the timed bake and delayed
timed bake features. Foods that can easily
spoil such as milk, eggs, fish, meat or poultry,
should be chilled in the refrigerator first.
Even when chilled, they should not stand in
the oven for more than 1 hour before cooking
begins, and should be removed promptly
when cooking is completed.
English 13
Broil
BROIL
Broil uses intense heat from the
upper burner.
The Broil mode is best suited for cooking thin, tender cuts
of meat (1" or less), poultry and fish. It can also be used to
brown breads and casseroles. Always broil with the door
closed.
The benefits of broiling include:
• Fast and efficient cooking.
• Cooking without the addition of fats or liquids.
4. For optimum browning, preheat broil burner for
approximately 3-4 minutes before adding food.
5. Place food in the oven. Close the oven door.
6. Broil on one side until food is browned. Turn and broil
food on 2nd side.
7. When broiling is finished press “Clear/Off”.
Note: Always pull the oven rack out to the stop position
before turning or removing the food.
CAUTION:
Should an oven fire occur, close the oven
door and turn the oven OFF. If the fire
continues, use a fire extinguisher. DO NOT
put water or flour on the fire. Flour may be
explosive.
Tips:
• Preheat oven for approximately 5 minutes.
• Steaks and chops should be at least ¾" thick.
• Brush fish and poultry with butter or oil to prevent
sticking.
• Turn meats once during the recommended cooktime.
When top browning casseroles, use only metal or glass
ceramic dishes such as Corningware®.
Use the broil feature to cook meats that require direct
exposure to radiant heat for optimum browing results.
When broiling always remember to arrange the oven racks
while oven is still cool. Position the rack as suggested in
the broil settings table.
Broil Oven Rack Position Table
Food Rack Position
Medium hamburgers and
steaks
Fish, medium-well steaks
& pork chops
Well-done foods such as
chicken
To set Broil
1. Arrange the oven rack while oven is still cool.
2. Press “BROIL”. " — — "will appear in display.
3. Press and hold the “+” or “-” until the desired broil
setting level appears in the display. Press the “+” for HI
broil or the “-” for LO broil. Most foods may be broiled
at the HI broil setting. Select the LO broil setting to
avoid excess browning or drying of foods that should
be cooked to the well-done stage.
6
5
4
Convection (some models)
CONVECTION
Convection feature benefits
• Foods may cook up to 25 to 30% faster, saving time
and energy.
• Multiple rack baking.
• No special pans or bakeware needed.
How Convection works
Convection uses a fan to circulate the oven's heat
uniformly and continuously around the oven. This improved
heat distribution allows for fast, even cooking and browning
results. It also gives better baking results when using two
racks at the same time.
Heated air flows around the food from all sides, sealing in
juices and flavors. Meats cooked with convection are
juicier. Poultry is crisp on the outside while staying tender
and moist on the inside. Breads and pastries brown more
evenly. Most foods baked in a standard oven can be
cooked faster and more evenly with Convection.
Convection is similar to Bake. Heat
comes from the lower burner. The
main difference in convection baking
is that the heat is circulated
throughout the oven by the
convection fan. This improves heat
distribution.
English 14
6
5
4
3
2
1
How to use Convection
When baking:
1. For optimum cooking results it is recommended to
preheat the oven when baking foods such as cookies,
biscuits and breads.
2. Reduce oven temperature 25°F from recipe’s
recommended oven temperature. Follow the remainder
of the recipe’s instructions using the minimum
recommended cooktime.
3. When using 2 oven racks at the same time, place in
positions 2 & 5 for best results.
Layer cakes will have better results using the “BAKE” pad.
(177°C).
To set Convection:
1. Press “Convection”. "— — —" appears in the display.
2. Within 5 seconds, press the “+” or “-”. The display will
show "350°F (177°C)." By pressing and holding the “+”
or “-”, the temperature can then be adjusted in 5°F
increments (1°C if the control is set to display Celsius).
3. As soon as the“+” or “-” pad is released, the oven will
begin heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel Convection, press “Clear/Off”.
To change the oven temperature after Convection has
started:
1. Press “Convection”. Visually check the bake
temperature and see if it needs to be changed.
2. Press the “+” or “-” pad to increase or decrease the set
temperature to the desired new oven temperature.
Operating the Gas Cooktop
Cookware material types
The cookware material determines how evenly and quickly
heat is transferred from the surface element to the pan
bottom. The most popular materials available are:
When roasting
1. Preheating is not necessary when roasting foods using
Convection.
2. Since Convection cooks food faster, reduce the
cooktime by 25% from the recommended cook time of
your recipe. Check the food at this time. If necessary,
increase cooktime until the desired doneness is
obtained.
3. Do not cover foods when roasting - this will prevent the
meat from browning properly.
4. Use the same temperature as indicated in the recipe.
Note:
When using Convection, cook time reductions may vary
depending on the amount and type of food being cooked.
Setting Convection
The oven can be programmed to Convection at any
temperature from 300°F to 550°F (149°C to 287°C). The
factory preset automatic bake temperature is 350°F
Aluminum - Excellent heat conductor. Some types of food
will cause it to darken (Anodized aluminum cookware
resists staining & pitting).
Copper - Excellent heat conductor but discolors easily.
Stainless - Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
Cast Iron - A poor heat conductor however will retain heat
very well. Cooks evenly once cooking temperature is
reached. Not recommended for use on ceramic cooktops.
Porcelain-enamel on metal - Heating characteristics will
vary depending on base material.
Glass - Slow heat conductor.
English 15
Using proper cookware
CAUTION:
*These settings are based for medium-weight metal or
aluminum pans with lids. Settings may vary when using
other types of pans.
Do not place flammable items such as plastic
salt and pepper shakers, spoon holders or
plastic wrappings on the cooktop when it is in
use. These items could melt or ignite.
Potholders, towels or wooden spoons could
catch fire if placed too close to the range
cooktop.
Important: Do not place aluminum foil, or ANY
material that can melt on the range cooktop. If
these items melt they may damage the cooktop.
Note: The size and type of utensil used, and the amount
and type of food being cooked will influence the setting
needed for best cooking results.
Setting proper burner flame height
The color of the flame is the key to proper burner
adjustment. A good flame is clear, blue and hardly visible in
a well-lighted room. Each cone of flame should be steady
and sharp. Adjust or clean burner if flame is yellow-orange.
For most cooking; start on the highest setting and then
turn to a lower setting to complete the process. Use the
recommendations below as a guide for determining proper
flame size for various types of cooking (Fig. 2)
For deep fat frying; use a thermometer and adjust the
surface knob accordingly. If the fat is too cool, the food will
absorb the fat and be greasy. If the fat is too hot, the food
will brown so quickly that the center will be undercooked.
Do not attempt to deep fat fry too much food at once as the
food will neither brown or cook properly.
Suggested settings for flame height table.
CAUTION:
Never extend the flame beyond the outer
edge of the cooking utensil. A higher flame
wastes energy, and increases your risk of
being burned by the flame (Fig. 2).
Correct flame
height
Incorrect flame
height
Fig. 2
Setting surface controls
Your gas range may be equipped with different sized
surface burners. The ability to heat food quicker and in
larger volumes increases as the burner size increases.
The smaller simmer burner (some models) is best suited
for simmering delicate sauces, etc.
The standard size (9,000 BTU) burners may be used for
most surface cooking needs.
The larger POWER PLUS burner (some models) is best
used for bringing large quantities of liquid to temperature
and when preparing larger quantities of food.
Flame Size Type of cooking
High flame Start most foods, bring
water to a boil, pan broiling
Medium flame Maintain a slow boil,
thicken sauces and
gravies, steaming
Low flame Keep foods cooking,
poach, stewing
English 16
It is important to select cookware that is suitable for the
amount and type of food being prepared. Select a burner
and flame size appropriate for the cookware size.
Center Oval Burner (some models)
The center oval burner is for large cooking pots or pans,
oval pans, fish poachers, and griddles. Be sure to center
the pan over the burner and select a flame size appropriate
for the pan.
Setting a surface burner
1. Place cooking utensil on center of surface burner grate. Make sure the cooking untensil is centered and stable on the grate.
2. Push the desired surface control knob in and turn counterclockwise out of the OFF position (see Fig.1).
3. Release the knob and rotate to the LITE position.
4. Visually check that the gas burner has lit.
5. Push the control knob in and turn counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the control knob markings and adjust the flame as needed..
Push Knob In
Then Turn Counterclockwise
Settings
Setting the Clock
When the appliance is first plugged in, or when the power
supply to the appliance has been interrupted, the display
will flash "12:00".
To set the analog clock:
1. Press "CLOCK" once (do not hold pad down).
2. Within 5 seconds, press and hold "+" or “-” until the
desired time of day appears in the display.
Note: The clock cannot be changed during any timed bake
or self-clean cycle.
Changing between continuous bake setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Fig. 1
Notes:
• DO NOT cook with the surface control knob left in the
LITE position. The electronic ignitor will continue to
spark if the control knob is left in the LITE position.
• When setting any surface control knob to the LITE
position, all electronic surface ignitors will spark at the
same time. However, only the surface burner you are
setting will ignite.
• In the event of an electrical power outage, the surface
burners can be lit manually. To light a surface burner,
hold a lit match to the burner head, then slowly turn the
surface control knob to LITE. After burner lights push in
and turn knob to desired setting. Use caution when
lighting surface burners manually.
Changing to continuous bake setting:
1. Press and hold “TIMER On/Off” down for 5 seconds until tone is heard, " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.
2. To cancel the continuous bake setting, press and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
1. Press “BROIL” . "— —" appears in the display.
2. Press and hold “+” the until "HI" appears in the display.
3. Press and hold “BROIL” until °F or °C appears in the
display.
4. Press the “+” or “-” to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
English 17
Setting a silent control panel
When choosing a function, a beep will be heard each time
a pad is pressed. If desired, the control can be
programmed for silent operation. Press and hold “START
TIME”. After 7 seconds, the control will beep once. This will
block the controls from sounding when a pad is pressed.
To return the sound, press and hold “START TIME” again
for 7 seconds until the control beeps once.
Setting oven lockout
The control can be programmed to lock the oven door and
lockout the oven control pads.
To set the oven lockout feature: (for models with Convection)
1. Press “Clear/Off” and “Convection” together and hold
for 3 seconds. “Loc” will appear in display, the “Door
Locked” indicator light will flash and the motor driven
door lock will begin to close automatically. Allow about
15 seconds for the oven door to lock. Once the oven
door is locked, the current time of day will appear in the
display.
2. To cancel the oven lockout feature, press “Clear/Off”
and “Convection” hold for 3 seconds. The control will
unlock the oven door and resume normal operation.
Setting the minute timer
1. Press “TIMER On/Off”.
2. Press the “+” to increase the time in one minute
increments. Press and hold the “+” to increase the time
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours and 59
minutes.
Note: If the “-” pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until “TIMER On/Off” is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press
and hold the “+” or “-” to increase or decrease the time
remaining.
To cancel the minute timer before the set time has run out
press “TIMER On/Off” once .
Note:
To set the oven lockout feature: (for models without Convection feature)
1. Press “Lock” and hold for 3 seconds. “Loc” will appear
in display, the “Door Locked” indicator light will flash and
the motor driven door lock will begin to close automatically.
Allow about 15 seconds for the oven door to lock. Once
the oven door is locked, the current time of day will appear
in the display.
2. To cancel the Oven Lockout feature, press “Lock” and
hold for 3 seconds. The control will unlock the oven door
and resume normal operation.
Note:
• DO NOT open the oven door while the indicator light
is flashing. Allow about 15 seconds for the oven door to
lock. Once the oven door is locked, the current time of
day will appear in the display.
• If any control pad is pressed with the oven lockout
feature active, “Loc” will appear in the display until the
control pad is released.
• The indicator light located above the “TIMER On/Off”
pad will glow while the minute timer is active.
• The minute timer will display hours and minutes until 1
hour remains on the timer. Once less than 1 hour
remains, the display will count down in minutes and
seconds. Once the timer has less than 1 minute
remaining only seconds will display.
• The minute timer DOES NOT start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the other
oven features. When the minute timer is in use with any
other feature, the minute timer will be shown in the
display. To view other functions, press the pad for that
function.
English 18
Cleaning and Maintenance
Cleaning
Self-Clean
WARNING:
• During the elimination of soil during self-
• Do not block the oven vents(s) during the
• When self-cleaning, confirm that the door
cleaning, small amounts of Carbon
Monoxide can be created and the
fiberglass insulation could give off very
small amounts of formaldehyde during
the first several cleaning cycles. To
minimize exposure to these substances,
provide good ventilation with an open
window, or use a ventilation fan or hood.
self-cleaning cycle. Always operate the
unit according to the instructions in the
manual.
locks and will not open. If the door does
not lock, stop self-clean operation and
contact service.
amount of salad oil (this will make the racks glide
easier into the rack position).
• Remove any excessive spillovers in the oven cavity
before starting the Self-Clean cycle. To clean, use hot,
soapy water and a cloth. Large spillovers can cause
heavy smoke or fire when subjected to high
temperatures. DO NOT allow food spills with a high
sugar or acid content (such as milk, tomatoes,
sauerkraut, fruit juices or pie filling) to remain on the
surface as they may leave a dull spot even after
cleaning.
• Hand clean any soil from the oven frame, the door liner
outside the oven door gasket and the small area at the
front center of the oven bottom. these areas heat
sufficiently to burn soil on. Clean with soap & water.
• Prior to setting the self-Clean cycle, any spills
remaining on the oven bottom should be removed.
Important: To start a self-clean cycle immediately without
a delay, skip steps 2 & 3 in the instructions provided below.
To set the Self-Clean mode:
1. Be sure the clock displays the correct time of day.
2. Press “Start Tme”. The " : " in the time of day will flash.
Preparing for a Self-Clean Cycle
During Self-Clean, the oven is heated to a very high
temperature. Soil is burned off at this temperature.
Adhere to the following cleaning precautions:
• DO NOT use oven cleaners or oven protective coatings
in or around any part of the Self-Cleaning oven.
• DO NOT clean the oven door gasket. The woven
material of the oven door gasket is essential for a good
seal. Care should be taken not to rub, damage or
remove the gasket.
• DO NOT use any cleaning materials on the oven door
gasket. Doing so could cause damage.
• Remove all utensils and ANY ALUMINUM FOIL.
These items cannot withstand high cleaning
temperatures and will melt.
• Remove racks. See “Removing & Replacing Oven
Racks” under Accessories. If they are not removed
during the Self-Clean cycle, their color will turn slightly
blue and the finish will dull. After the cycle is complete
and the oven has cooled, rub the sides of the oven
racks with wax paper or a cloth containing a small
3. Press and hold the “+” pad to scroll to the time to start
the delayed Self-Clean cycle. Release the pad when
the desired time is displayed.
4. Press “Self Clean”. “---” appears in the display.
5. Press the “+” or “-” pad once. “3:00” will appear in the
display indicating that a 3 hour self-clean time is set. To
change to a 2 hour self-clean time press “-” once (2:00
appears in the display). To self-clean using a 4 hour
clean time press “+” once (4:00 appears in display).
6. " CLn" will appear in the display during the self-clean
cycle and the "LOCK" light will glow until the self-
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
Note: As soon as the controls are set, the motor driven lock
will begin to close automatically and the “LOCK” indicator
English 19
light will flash. DO NOT open the oven door while the light
is flashing (it takes about 15 seconds for the oven door to
lock).
Avoid These Cleaners
Do not use commercial oven cleaners such as Easy Off®.
They may damage the oven finish or parts.
When the self-clean cycle has completed:
1. The time of day will appear in the display window and
the “Clean” and "LOCK" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR and
the "LOCK" light has gone out, the oven door can be
opened.
3. A moist cloth is the best way to wipe out the remaining
ash from the oven.
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a selfcleaning cycle once it has been activated:
1. Press “Clean/Off”.
2. Once the oven has cooled down for about 1 HOUR and
the "LOCK" light has turned off, the oven door can be
opened.
3. Restart the Self-Clean cycle once all conditions have
been corrected.
CAUTION:
• To avoid possible burns use care when
opening the oven door after the selfcleaning cycle. Stand to the side of the
oven when opening the door to allow hot
air or steam to escape.
• DO NOT force the oven door open. This
can damage the automatic door locking
system. Use caution and avoid possible
burns when opening the door after the
self-cleaning cycle has completed. The
oven may still be VERY HOT.
Note:
• Whenever the self-clean feature is active you may
check the amount of time remaining in the self-clean
cycle by pressing the “Self Clean” pad. Remember the
range door cannot be opened until the range has
cooled sufficiently. You will need to add about 1 hour to
the time displayed before you can use the range for
cooking.
• When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Never use scouring pads or abrasive cleaners.
Cleaning Guide
Part Recommendations
Oven Rack Wash with hot soapy water. Rinse
thoroughly and dry, or gently rub
with cleansing powder or soap-filled
pads as directed. DO NOT clean the
rack in the self-cleaning oven.
If the racks are cleaned in the oven
during the self clean mode, they will
loose their shiny finish and may not
glide smoothly. If this happens, wipe
the rack edges with a small amount
of vegetable oil. Then wipe off
excess.
Fiberglass
Gasket
Glass Wash with soap and water or glass
Painted
Surfaces Control Panels
and Display
Areas
Porcelain
Surfaces
DO NOT CLEAN GASKET.
cleaner. Use Fantastik® or Formula
409® to remove grease spatters and
stubborn stains.
Clean with hot soapy water or apply
Fantastik® or Formula 409® to a
clean sponge or paper towel and
wipe clean. Avoid using powder
cleaning agents, steel wool pads
and oven cleaners.
Immediately wipe up acid spills like
fruit juice, milk and tomatoes with a
dry cloth. Do not use a moistened
sponge/cloth on hot porcelain. When
cool, clean with hot soapy water or
apply Bon-Ami® or Soft Scrub® to a
damp sponge. Rinse and dry. For
stubborn stains, use soap-filled
pads. It is normal for porcelain to
show fine lines with age due to
exposure to heat and food soil.
English 20
Part Recommendations
To clean the burner head ignition ports
Stainless Steel
Surfaces
Plastic &
Controls
Printed areas
(words &
numbers)
Cooktop surface
and contoured
well areas,
surface burner
heads and caps
Always wipe or rub in the direction of
the grain. Clean with a soapy
sponge, then rinse and dry, or wipe
with Fantastik® or Formula 409®
sprayed on a paper towel. Protect
and polish with Stainless Steel
Magic® and a soft cloth. Remove
water spots with a cloth dampened
with white vinegar. Use Bar Keeper's
Friend® to remove heat
discoloration.
When cool, clean with soapy water,
rinse and dry.
Do not use abrasive cleansers or
petroleum based solvents.
See Cleaning the cooktop and
surface burners instructions
provided in the following Care &
Cleaning section.
Cooktop Cleaning and Maintenance
Each burner head has a small ignition port located as
illustrated. Should you experience ignition problems it may
be that this port hole is partially blocked with soil. With the
burner head in place, use a small wire gauge needle or the
end of a paper clip to clear the ignition port.
To clean the surface burner heads
For proper gas flow it may be necessary to clean the burner
head and slots. To clean, first use a clean DAMP cloth to
soak up any spills. Remove any food from between the
burner slots using a small non-abrasive brush like a
toothbrush and afterwards wipe up using a damp cloth. For
stubborn soils located in the slots, use a small-gauge wire
or needle to clean.
To clean the recessed and contoured well areas of the cooktop
If a spill occurs on or in the recessed or contoured areas,
blot up spill with an absorbent cloth. Rinse with a clean,
damp cloth and wipe dry.
To clean the surface burner grates, caps & burner drip
pans (some models)
CAUTION:
To avoid possible burns use care when
cleaning the cooktop. DO NOT attempt to
clean the cooktop whenever the cooktop or
burner heads are still hot.
To avoid possible burns DO NOT attempt any
of the cleaning instructions provided below
before turning OFF all of the surface burners.
The cooktop and surface burners are designed tomake
cleaning easier. Since cooktop surface burners are sealed,
cleanups are easy when spillovers are cleaned up
immediately. Routinely clean the cooktop. Wipe with a
clean, damp cloth and wipe dry to avoid scratches. The
contoured well areas and burner drip pans (some models
should be frequently cleaned also.
Keeping the burner head ports and slots clean will prevent
improper ignition and uneven flame. Refer to the following
sections for further instructions.
Use a soap-filled scouring pad or a mild abrasive cleanser
to clean the surface burner caps and surface burner drip
pans (if equipped).
Slots
Important:
The surface burner heads are secured to the cooktop and
must be cleaned in place on the cooktop.
For proper flow of gas and ignition of the burner — DO
NOT allow spills, food, cleaning agents or any other
material to enter the gas orifice holder opening.
Always keep the surface burner cap and surface burner
head in place whenever a surface burner is in use.
Ignition Port
Orifice Port
Fig.1
Cooktop Burner Head
English 21
Maintenance
Replacing an Oven Light
CAUTION:
• Make sure the appliance and lights are
cool and power to the appliance has been
turned off before replacing the light
bulb(s). Failure to do so could result in
electrical shock or burns. Wear a leatherfaced glove for protection against
possible broken glass.
The light bulb is located at the rear of the oven and is
covered with a glass shield held by a wire holder. The glass
shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1. Turn electrical power off at the main source or unplug the range.
2. Press wire holder to one side to release the glass shield.
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder into place.
5. Turn power back on again at the main source (or plug in the range back in).
6. The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in this Use and Care Guide.
English 22
Removing the Oven Door
CAUTION:
When removing the door:
• Make sure oven is cool and power to the
oven has been turned off before
removing the door. Failure to do so could
result in electrical shock or burns.
• The oven door is heavy and fragile. Use
both hands to remove the oven door. The
door front is glass. Handle carefully to
avoid breaking.
• For safe, temporary storage, lay the door
flat with the inside of the door facing
down.
• Grasp only the sides of the oven door. Do
not grasp the handle as it may swing in
your hand and cause damage or injury.
• Failure to grasp the oven door firmly and
properly could result in personal injury or
product damage.
• Do not lay removed door on sharp or
pointed objects as this could break the
glass. Lay on a flat, smooth surface,
positioned so that the door cannot fall
over.
Oven
Door
About
10°
Door
Hinge
4. Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - see figure).
5. Close the door to the broil stop position (the oven door will stop into this position just before fully closing).
6. With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (see figure).
To remove the oven door:
1. Be sure to read the above CAUTION before attempting to remove the door.
2. Open oven door completely (horizontal with floor - see figure). Door hinge locations are circled.
3. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (see figure). A tool such as a small flat-blade screwdriver may be required.
English 23
To replace the oven door:
Oven
Door
About
10°
Door
Hinge
1. Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - see figure).
2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (see figure). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - see figure). Door hinge locations are circled.
Special door care instructions - Oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are
fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
English 24
4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (see figure) to the locked position.
5. Close the oven door.
Service
Before Calling Service
Troubleshooting Chart
Oven Problem Possible Causes and Suggested Solutions
Oven door is locked and will not open,
even after cooling.
Oven is not heating. Check circuit breaker or fuse box to your house. Make sure there is proper
Baking results are not as expected. Many factors affect baking results. Make sure the proper oven rack position
Appliance is not level. Be sure floor is level, strong & stable enough to adequately support range.
Cannot move appliance easily. Appliance
must be accessible for service.
Surface burners do not ignite. Surface control knob was not completely turned to LITE. Push in & turn the
Turn the oven off at the circuit breaker and wait five minutes. Turn breaker
back on. The oven should reset itself and will be operable.
electrical power to the oven. Be sure oven temperature has been selected.
is used. Center food in the oven and space pans to allow air to circulate.
Allow the oven to preheat to the set temperature before placing food in the
oven. Try adjusting the recipe's recommended temperature or baking time.
If you feel the oven is too hot or cool, see “Adjusting Oven Temperature” in
this Use & Care Guide.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the
oven rack. Adjust leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure
cabinets are square & have sufficient room for appliance clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to
make appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can
be lifted over carpet.
surface control knob to LITE until burner ignites and then turn control knob
to desired flame size.
Burner ports are clogged. With the burner OFF, use a small-gauge wire or
needle to clean burner head slots and ignition ports. See “Cleaning the
cooktop and surface burners” in the Care & Cleaning section for additional
cleaning instructions.
Range power cord is disconnected from outlet (electric ignition models
only). Be sure power cord is securely plugged into the power outlet.
Electrical power outage (electric ignition models only). Burners can be lit
manually. See section on Setting Surface Controls.
Surface burner flame only part way
around burner cap.
Burner slots or ports are clogged. With the surface burner OFF, clean ports
with a small-gauge wire or needle.
Moisture is present after cleaning. Lightly fan the flame & allow burner to
operate until flame is full. Dry the surface burners thoroughly following the
instructions under “Cleaning the cooktop and surface burners” provided in
the Care & Cleaning section.
English 25
Oven Problem Possible Causes and Suggested Solutions
Surface burner flame is orange. Dust particles in main gas line. Allow the burner to operate a few minutes
until flame turns blue. In coastal areas, a slightly orange flame is
unavoidable due to salt air.
Oven light is not working properly. Replace or reinsert the light bulb if loose or defective. Touching the bulb
with fingers may cause the bulb to burn out.
Oven light does not turn off. Check for obstruction in oven door. Check to see if hinge is bent.
Entire appliance does not operate. The time of day is not set. The time of day must first be set in order to
operate the oven. See “Setting the clock” in the Setting oven controls
section.
Make sure cord/plug is closed.
Service wiring is not complete. Contact your dealer, installing agent or
authorized service agent.
Electrical power outage. Check house lights to be sure. Call your local
electric company for service.
Oven is not self-cleaning properly. Allow the oven to cool before running self-clean. Always wipe out loose
soils or heavy spillovers before running self-clean. If oven is badly soiled,
set oven for the maximum self-clean time.
Clock and timer are not working properly. Make sure there is electrical power to oven.
Oven portion of appliance does not
operate.
With a new oven there is a strong odor
when oven is turned on.
Be sure the oven controls are set properly for the desired cooking feature.
See Setting Oven Controls in this manual or read the instructions “Entire
appliance does not operate” in this checklist.
This is normal with a new oven and will disappear after a few uses.
Operating the self-clean cycle also "burns-off" the smell more quickly.
Control does not react when a key is
touched.
Fan is running during modes that do not
use convection
Warm air or steam escapes from oven
vent.
Oven smokes excessively during broiling. Incorrect setting. Follow broiling instructions in Setting Oven Controls.
Flames inside oven or smoking from oven
vent.
Be sure that pad is clean. Touch the center of the touchpad. Use the flat
part of your finger.
On some models, the convection fan runs while the oven is preheating for
the bake mode. This is normal.
It is normal to see or feel steam or warm air escaping from the oven vent.
Do not block the vent.
Make sure oven door is closed for broiling.
Meat too close to upper burner. Reposition the broil rack to provide proper
clearance between the meat & the burner. Preheat the oven.
Meat not properly prepared. Remove excess fat from meat. Cut remaining
fatty edges to prevent curling, but do not cut into lean.
Grease has built up on oven surfaces. Regular cleaning is necessary when
broiling frequently. Old grease or food spatters cause excessive smoking.
Excessive spillovers in oven. For example this will happen for pie spillovers
or large amounts of grease left on the oven bottom. Wipe up excessive
spillovers before starting oven. If flames or excessive smoke are present
see “About broiling” in the Setting Oven Controls section.
English 26
Loading...