Bosch HGD745222N Instruction Manual

[en] Instruction manual ............. 3 [nl] Gebruiksaanwijzing .......... 32
Free standing cooker Fornuis HGD745222N
2 Ø = cm
3
[en]Instruction manual
Important safety information..................................................... 4
Causes of damage...................................................................... 7
Damage to the oven...........................................................................7
Damage to the plinth drawer............................................................7
Set-up, gas and electricity connection..................................... 7
Gas connection ...................................................................................7
Faults in the gas installation/smell of gas .....................................7
Moving the appliance by the gas line or door handle.................8
Electrical connection ..........................................................................8
Levelling the cooker ...........................................................................8
Wall fixing .............................................................................................8
Setting up the appliance ...................................................................8
Measures to be noted during transport..........................................8
Your new appliance ....................................................................9
General information............................................................................9
Cooking area .......................................................................................9
Control panel .................................................................................... 10
The cooking compartment ............................................................. 10
Your accessories...................................................................... 11
Inserting accessories ...................................................................... 11
Special accessories ........................................................................ 11
After-sales service products .......................................................... 12
Before using the oven for the first time..................................12
Setting the time ................................................................................12
Heating up the oven........................................................................ 12
Cleaning the accessories............................................................... 12
Making settings on the hob.....................................................13
Advance cleaning of burner cup and cap .................................. 13
Igniting the gas burners.................................................................. 13
Table – Cooking ..............................................................................13
Suitable pans ............................................................................ 14
Precautions for use ......................................................................... 14
Programming the oven ............................................................14
Type of heating and temperature ................................................. 14
Rapid heating ................................................................................... 15
Setting the time functions .......................................................15
Timer .................................................................................................. 15
Cooking time .................................................................................... 15
End time............................................................................................. 16
Time.................................................................................................... 17
Childproof lock ......................................................................... 17
Changing the basic settings ...................................................17
Care and cleaning ....................................................................18
Cleaning agents ............................................................................... 18
Upper glass cover ...........................................................................19
Detaching and refitting the rails .................................................... 20
Detaching and attaching the oven door...................................... 20
Removing and installing the door panels ................................... 21
Troubleshooting .......................................................................21
Malfunction table.............................................................................. 21
Replacing the bulb in the oven ceiling light ............................... 22
Glass cover ....................................................................................... 22
After-sales service ...................................................................22
E number and FD number ............................................................. 22
Energy and environment tips..................................................22
Saving energy with your oven ....................................................... 22
Saving energy with the gas hob ................................................... 22
Environmentally-friendly disposal.................................................. 22
Tested for you in our cooking studio .....................................23
Cakes and pastries ......................................................................... 23
Baking tips ........................................................................................25
Meat, poultry, fish............................................................................. 25
Tips for roasting and grilling.......................................................... 27
Bakes, gratins, toast with toppings .............................................. 27
Preprepared products.....................................................................28
Special dishes .................................................................................. 29
Defrosting .......................................................................................... 29
Drying.................................................................................................29
Preserving ......................................................................................... 30
Acrylamide in foodstuffs .........................................................30
Test dishes................................................................................ 31
Baking ................................................................................................ 31
Grilling................................................................................................ 31
Produktinfo
Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com and in the online shop www.bosch-eshop.com
4
: Important safety information
Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
These instructions are only valid if the appropriate country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.
Appliance category: Category 1 Check the appliance for damage after
unpacking it. Do not connect the appliance if it has been damaged in transport.
Only allow a licensed professional to connect the appliance and to convert the appliance to a different type of gas. The appliance must be installed (electric and gas connections) in accordance with the instruction and installation manual. An incorrect connection or incorrect settings may lead to serious accidents and damage to the appliance. The appliance manufacturer accepts no liability for damage of this kind. The appliance's warranty becomes void.
Caution:This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
This appliance is intended for use up to a maximum height of 2000 metres above sea level.
Caution:The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.
This appliance is not designed for operation with an external timer or by remote control.
Do not use inappropriate child safety shields or hob guards. These can cause accidents.
This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capabilities or by persons with a lack of experience or knowledge if they are supervised or are instructed by a person responsible for their safety how to use the appliance safely and have understood the associated hazards.
Children must not play with, on, or around the appliance. Children must not clean the appliance or carry out general maintenance unless they are at least 8 years old and are being supervised.
Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
Always slide accessories into the cooking compartment correctly. See "Description of accessories in the instruction manual.
Risk of fire!
A draught is created when the appliance door is opened. Greaseproof paper may come into contact with the heating element and catch fire. Do not place greaseproof paper loosely over accessories during preheating. Always weight down the greaseproof paper with a dish or a baking tin. Only cover the surface required with greaseproof paper. Greaseproof paper must not protrude over the accessories.
Risk of fire!
Combustible objects that are left in the cooking compartment may ignite. Never store combustible items in the cooking compartment. Never open the appliance door if there is smoke inside. Switch off the appliance and unplug the mains plug or switch off the fuse in the fuse box. Shut off the gas supply.
Risk of fire!
Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish
5
flames carefully using a lid, fire blanket or something similar.
Risk of fire!
The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob.
Risk of fire!
The appliance becomes very hot, and flammable materials can easily catch fire. Do not store or use any flammable objects (e.g. aerosol cans, cleaning agents) under or in the vicinity of the oven. Do not store any flammable objects inside or on top of the oven.
Risk of fire!
When gas hotplates are in operation without any cookware placed on them, they can build up a lot of heat. The appliance and the extractor hood above it may become damaged or be set on fire. Grease residue in the filter of the extractor hood may ignite. Only operate the gas burners with cookware on them.
Risk of fire!
The rear of the appliance becomes very hot. This may cause damage to the power cables. Electricity and gas lines must not come into contact with the rear of the appliance.
Risk of fire!
Never place flammable objects on the burners or store them in the cooking compartment. Never open the appliance door if there is smoke inside. Switch off the appliance. Pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box. Shut off the gas supply.
Risk of fire!
The surfaces of the plinth drawer may become very hot. Only store oven accessories in the drawer. Flammable and combustible objects must not be stored in the plinth drawer.
Risk of burns!
The appliance becomes very hot. Never touch the interior surfaces of the cooking compartment or the heating elements. Always allow the appliance to cool down. Keep children at a safe distance.
Risk of serious burns!
Accessories and ovenware become very hot. Always use oven gloves to remove accessories or ovenware from the cooking compartment.
Risk of burns!
Alcoholic vapours may catch fire in the hot cooking compartment. Never prepare food containing large quantities of drinks with a high alcohol content. Only use small quantities of drinks with a high alcohol
content. Open the appliance door with care.
Risk of burns!
The hotplates and surrounding area (particularly the hob surround, if fitted) become very hot. Never touch the hot surfaces. Keep children at a safe distance.
Risk of burns!
During operation, the surfaces of the appliance become hot. Do not touch the surfaces when they are hot. Keep children away from the appliance.
Risk of burns!
Empty cookware becomes extremely hot when set on a gas hotplate that is in operation. Never heat up empty cookware.
Risk of burns!
The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.
Risk of burns!
Caution: Accessible parts may be hot when the grill is in use. Young children should be kept away from the appliance.
Risk of burns!
If the liquefied gas bottle is not upright, liquefied propane/butane can enter the appliance. Intense darting flames may therefore escape from the burners. Components may become damaged and start to leak over time so that gas escapes uncontrollably. Both can cause burns. Always use liquefied gas bottles in an upright position.
Risk of scalding!
The accessible parts become hot during operation. Never touch the hot parts. Keep children at a safe distance.
Risk of scalding!
When you open the appliance door, hot steam may escape. Open the appliance door with care. Keep children at a safe distance.
Risk of scalding!
Water in a hot cooking compartment may create hot steam. Never pour water into the hot cooking compartment.
Risk of injury!
Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents.
Risk of injury!
Incorrect repairs are dangerous. Repairs may only be carried out, and damaged power and gas lines replaced, by an after­sales engineer trained by us. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Shut off the gas supply. Contact the after-sales service.
Risk of injury!
6
Faults or damage to the appliance are dangerous. Never switch on a faulty appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Shut off the gas supply. Contact the after-sales service.
Risk of injury!
Unsuitable pan sizes, damaged or incorrectly positioned pans can cause serious injury. Observe the instructions which accompany the cookware.
Risk of injury!
Caution: Glass lids may shatter when heated. Turn off all the burners before shutting the lid. Wait until the oven has cooled down before closing the glass cover.
Risk of injury!
If the appliance is placed on a base and is not secured, it may slide off the base. The appliance must be fixed to the base.
Risk of tipping!
Warning: In order to prevent tipping of the
appliance, this stabilizing means must be installed. Refer to the instructions for installation.
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried out by one of our trained after-sales engineers. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Contact the after-sales service.
Risk of electric shock and serious injury!
The cable insulation on electrical appliances may melt when touching hot parts of the appliance. Never bring electrical appliance cables into contact with hot parts of the appliance.
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners, which can result in an electric shock.
Risk of electric shock!
When replacing the cooking compartment bulb, the bulb socket contacts are live. Before replacing the bulb, unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
Risk of electric shock!
A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.
7
Causes of damage
Hob
Caution!
Only use the burners when cookware has been placed on
top. Do not heat up empty pots or pans. The saucepan base will be damaged.
Only use pots and pans with an even base.
Place the pot or pan centrally over the burner. This will
optimise transfer of the heat from the burner flame to the pot or ban base. The handle does not become damaged, and greater energy savings are guaranteed.
Ensure that the gas burners are clean and dry. The burner
cup and burner cap must be positioned exactly.
Ensure that the top cover is not closed when the oven is
started up.
Damage to the oven
Caution!
Accessories, foil, greaseproof paper or ovenware on the
cooking compartment floor: do not place accessories on the cooking compartment floor. Do not cover the cooking compartment floor with any sort of foil or greaseproof paper. Do not place ovenware on the cooking compartment floor if a temperature of over 50 ºC has been set. This will cause heat to accumulate. The baking and roasting times will no longer be correct and the enamel will be damaged.
Water in a hot cooking compartment: do not pour water into
the cooking compartment when it is hot. This will cause
steam. The temperature change can cause damage to the enamel.
Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged periods This will damage the enamel.
Fruit juice: when baking particularly juicy fruit pies, do not
pack the baking tray too generously. Fruit juice dripping from the baking tray leaves stains that cannot be removed. If possible, use the deeper universal pan.
Cooling with the appliance door open: only allow the cooking
compartment to cool when it is closed. Even if the appliance door is only open a little, front panels of adjacent units could be damaged over time.
Very dirty door seal: If the door seal is very dirty, the
appliance door will no longer close properly when the appliance is in use. The fronts of adjacent units could be damaged.Always keep the door seal clean.
Appliance door as a seat, shelf or worktop: Do not sit on the
appliance door, or place or hang anything on it. Do not place any cookware or accessories on the appliance door.
Inserting accessories: depending on the appliance model,
accessories can scratch the door panel when closing the appliance door. Always insert the accessories into the cooking compartment as far as they will go.
Carrying the appliance: do not carry or hold the appliance by
the door handle. The door handle cannot support the weight of the appliance and could break.
Damage to the plinth drawer
Caution!
Do not place hot objects in the plinth drawer. It could be damaged.
Set-up, gas and electricity connection
Gas connection
Installation must only be performed by an approved expert or a licensed after-sales service engineer in accordance with the instructions specified under "Gas connection and conversion to a different gas type".
For the licensed expert or after-sales service
Caution!
The setting conditions for this appliance are specified on the
rating plate on the back of the appliance. The gas type set in the factory is marked with an asterisk (*).
Before setting up the appliance, check the grid access
conditions (gas type and gas pressure) and ensure that the gas setting of the appliance meets these conditions. If the appliance settings have to be changed, follow the instructions in the section "Gas connection and conversion to a different gas type".
This appliance is not connected to a waste gas main. It must
be connected and commissioned in accordance with the
installation conditions. Do not connect the appliance to a waste gas main. All ventilation regulations must be observed.
The gas connection must be made via a fixed, i.e. not mobile
connection (gas line) or via a safety hose.
If using the safety hose, ensure that the hose is not trapped
or crushed. The hose must not come into contact with hot surfaces.
The gas line (gas pipe or safety hose) can be connected to
the right or left-hand side of the appliance. The connection must have an easily accessible locking device.
Faults in the gas installation/smell of gas
If you notice a smell of gas or faults in the gas installation, you must
immediately shut off the gas supply and/or close the gas
cylinder valve
immediately extinguish all naked flames and cigarettes
switch off electrical appliances and lights
open windows and ventilate the room
call the aftersales service or the gas supplier
8
Moving the appliance by the gas line or door handle
Do not move the appliance while holding the gas line; the gas pipe could be damaged. There is a risk of a gas leak! Do not move the appliance while holding it by the door handle. The door hinges and door handle could be damaged.
Electrical connection
Caution!
Have the appliance set up by your after-sales service. A 16 A
fuse is required for connection. The appliance is designed for operation at 220-240 V.
If the electricity supply drops below 180 V, the electrical
ignition system does not work.
Any damage arising from the appliance being connected
incorrectly will invalidate the guarantee.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
For the after-sales service
Caution!
The appliance must be connected in accordance with the
data on the rating plate.
Only connect the appliance to an electrical connection that
meets the applicable provisions. The socket must be easily accessible so that you can disconnect the appliance from the electricity supply if necessary.
Please ensure the availability of a multi-pin disconnecting
system.
Never use extension cables or multiple plugs.
For safety reasons, this appliance must only be connected to
an earthed connection. If the safety earth terminal does not comply with regulations, safety against electrical hazards is not guaranteed.
You must use a H 05 W-F type cable or equivalent for the
appliance connection.
Levelling the cooker
Always place the cooker directly on the floor.
1. Pull out the plinth drawer and lift it up and out.
There are adjustable feet at the front and rear on the inside of the plinth.
2. Use an Allen key to raise or lower the adjustable feet as
necessary until the cooker is level (picture A).
3. Push the plinth drawer back in (picture B).
Wall fixing
To prevent the cooker from tipping over, you must fix it to the wall using the enclosed bracket. Please observe the installation instructions for fixing the oven to the wall.
Setting up the appliance
The appliance must be set up directly on the kitchen floor
and in line with the specified dimensions. The appliance must not be set up on any other object.
The distance between the top edge of the oven and the
bottom edge of the extractor hood must meet the requirements of the extractor hood manufacturer.
Ensure that the appliance is not moved again after set up.
The distance from the high output burner or wok burner to the fronts of the adjacent units or the wall must be at least 50 mm.
Measures to be noted during transport
Secure all mobile parts in and on the appliance using an adhesive tape that can be removed without leaving any traces. Push all accessories (e.g. baking tray) into the corresponding slots with cardboard at the edges, in order to avoid damaging the appliance. Place cardboard or similar between the front and rear side to prevent knocks against the inside of the glass door. Secure the door and, if available, the top cover to the appliance sides using adhesive tape.
Keep the original appliance packaging. Only transport the appliance in the original packaging. Observe the transport arrows on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to guarantee sufficient protection against any transport damage.
Transport the appliance in an upright position. Do not hold the appliance by the door handle or the connections on the rear, as these could be damaged. Do not place any heavy objects on the appliance.
%$


0LQ 
9
Your new appliance
In this section you will find information on the appliance, the operating modes and the accessories.
General information
The design depends on the respective appliance model.
Cooking area
Here is an overview of the control panel. The design depends on the respective appliance model.
Explanations
1* Hob cover**
2* Steam outlet
Caution!
When the oven is in operation, hot steam escapes here.
3 Hob**
4 Control panel**
5* Cooling fan
6 Oven door**
7* Plinth drawer**
* Optional (available for some appliances) ** Depending on the appliance model, details may vary.




Explanations
1 Standard burner
2 Economy burner
3 High output burner
4 Standard burner
10
Control panel
Details may vary depending on the appliance model.
Function control knob
The function control knob is used to select the type of heating.
Once a type of heating has been selected the oven light is turned on.
Temperature selector
Use the temperature selector to set the temperature and the grill setting.
While the oven is heating up, the
p temperature symbol lights
up in the display. If heating is interrupted, the symbol goes out. For some settings, it does not light up.
Burner knob
You can adjust the heat setting of the hotplates using the four burner knobs.
There is a limit stop at the end of the settings area. Do not turn the timer beyond this.
Buttons and display
You can use the buttons to set various additional functions. On the display, you can read the values that you have set.
The time-setting option that is currently selected in the display is indicated by brackets [ ] around the corresponding symbol. Exception: For the clock, the
0 symbol only lights up if the time
is being changed.
Buttons
The sensors are located under the individual buttons. They must not be pressed too firmly. Only touch the corresponding symbol.
The cooking compartment
The oven light is located in the cooking compartment. A cooling fan protects the oven from overheating.
Light
The oven light remains on while the oven is working.
However, the light can be turned on without the oven being on by setting the function control knob to
^.
Cooling fan
The cooling fan switches on and off as required. The hot air escapes above the door.
So that the cooking compartment cools down more quickly after operation, the cooling fan continues to run for a certain period afterwards.
Caution!
do not cover the ventilation slots. Otherwise the oven will overheat.
Setting Use
Û
Zero setting The oven is off.
<
3D Hot air* For cakes and pastries. These can
be baked on three levels. A fan located on the rear wall of the oven disperses the heat evenly.
%
Top and bottom heat­ing*
For cakes, au gratin dishes, and lean meat roasts, e.g. veal or game, on one level. The heat is provided by the bottom and top heating elements.
6
Pizza function Quick preparation of frozen foods
without pre-heating, e.g., pizza, chips or puff pastry. The heat comes from the bottom element and the fan on the rear wall.
7
Grill with hot air For roasting joints of meat, poultry
and fish. The grill heating element and the fan switch on and off alter­nately. The fan circulates the heat generated by the grill around the food.
(
Large surface grill For grilling steaks, sausages, fish
and toasting bread. The entire sur­face below the grill heating ele­ment is heated.
*
Grill, small surface area
For grilling a small number of steaks or sausages or small amounts of fish, and toasting bread. Only the central area of the grill heating element heats up.
$
Bottom heating Confits, baking and cooking au
gratin. The heat comes from the bottom heating element.
B
Defrosting Defrosting, e.g. meat, poultry,
bread and cakes. The fan circu­lates the hot air around the food.
^
Light For turning on the oven light.
* Type of heating used to determine the appliance's energy effi-
ciency rating according to EN60350.
Positions Function
ÿ
Zero position Oven not hot.
50-270 Temperature
range
Temperature in °C.
1, 2, 3 Grill settings
Grill settings for the
* Grill,
small area and
( Grill, large
area.
Setting 1 = low
Setting 2 = medium
Setting 3 = high
Positions Function/gas oven
þ
Zero position The oven is switched off.
8
Ignition position Ignition position
— ˜
Settings area Large flame = highest setting
Economy flame = lowest setting
Button Use
c
Rapid heating Heats up the oven particularly
quickly.
0
Time-setting options
Selects the timer
U, cooking
time
r, end time p and clock 0.
D
Childproof lock Locks and unlocks oven functions.
A
@
Minus
Plus
Decreases the set values.
Increases the set values.
11
Your accessories
The accessories supplied with your appliance are suitable for making many meals. Ensure that you always insert the accessories into the cooking compartment the right way round.
There is also a selection of optional accessories, with which you can improve on some of your favourite dishes, or simply to make working with your oven more convenient.
Inserting accessories
You can insert the accessories into the cooking compartment at 5 different levels. Always insert them as far as they will go so that the accessories do not touch the door panel.
The accessories can be pulled out approximately halfway until they lock in place. This allows dishes to be removed easily.
When sliding the accessories into the cooking compartment, ensure that the indentation is at the back. They can only lock in place from this position.
With the pull-out rails at levels 2 and 3, you can pull the accessories out further.
Depending on the appliance equipment, the pull-out rails lock into place when they are pulled out fully. This makes it easier for you to place the accessories on top. To unlock, push the pull-out rails back into the cooking compartment with a certain amount of force.
Note: The accessories may deform when they become hot. Once they cool down again, they regain their original shape. This does not affect their operation.
Hold the baking tray securely on the sides with both hands and push it parallel into the frame. Avoid movements to the right or left when pushing the baking tray in. Otherwise, it will be difficult to push the tray in and the enamelled surfaces could be damaged.
You can buy accessories from the after-sales service, from specialist retailers or online. Please specify the HEZ number.
Special accessories
You can purchase special accessories from the after-sales service or specialist retailers. You will find a comprehensive range of products for your oven in our brochures and online. The availability of special accessories and whether it is possible to order them on the Internet will vary from country to country. You can find information about this in the sales brochures.
Not all special accessories are suitable for all appliances. When purchasing, always quote the exact identification number (E no.) of your appliance.
Wire rack For ovenware, cake tins, roasts, grilling and frozen meals.
Slide the wire rack into the oven with the open side facing the oven door and the curvature pointing downwards
¾.
Enamel baking tray For cakes and biscuits.
Push the baking tray into the oven with the sloping edge facing towards the oven door.
Special accessories for HEZ number Use
Practical storage of cooking utensils
(easyStore)
HEZ25E900 Practical storage of cooking utensils on the upper glass cover.
It comprises 4 hooks.
It is intended to be used for hanging up cooking utensils (ladle, tongs, etc.). It must be attached to your appliance's upper cover before use. You can find detailed instructions in the installation instructions.
Practical storage of cooking utensils
(easyStore)
HEZ25E901 Practical storage of cooking utensils on the upper glass cover.
It comprises 2 hooks and 1 bar.
It is intended to be used for hanging up cooking utensils (ladle, tongs, etc.). It must be attached to your appliance's upper cover before use. You can find detailed instructions in the installation instructions.
Pizza tray HEZ317000 Ideal for pizza, frozen products or large, round cakes. You can
use the pizza tray instead of the universal pan. Place the tray on the wire rack and refer to the specifications in the tables.
Wire insert HEZ324000 For roasting. Always place the wire rack in the universal pan.
This ensures that dripping fat and meat juices are collected.
12
After-sales service products
You can obtain suitable care and cleaning agents and other accessories for your domestic appliances from the after-sales
service, specialist retailers or (in some countries) online via the eShop. Please specify the relevant product number.
Before using the oven for the first time
In this section, you can find out what you must do before using your oven to prepare food for the first time. First read the section on Safety information.
Setting the time
Once the oven has been connected, the 0 symbol and four zeros are shown flashing on the display panel. Set the time.
1. Press the 0 button.
The display shows the time
‚ƒ:‹‹.
2. Set the time with the buttons @ or A.
The programmed time is displayed after a few seconds.
Heating up the oven
To remove the new cooker smell, heat up the oven when it is empty and closed. An hour of Top/bottom heating
% at
240 °C is ideal for this purpose. Ensure that no packaging remnants have been left in the cooking compartment.
Keep the kitchen ventilated the whole time the oven is on.
1. Use the function selector to set Top/bottom heating %.
2. Set the temperature selector to 240 °C.
After an hour, switch off the oven. To do so, turn the function selector to the off position.
Cleaning the accessories
Before you use the accessories for the first time, clean them thoroughly with hot soapy water and a soft dish cloth.
Grill tray HEZ325000 Use for grilling in place of the wire rack or as a splatter guard,
so that the oven does not become very dirty. Only use the grill tray in the universal pan.
Grilling on the grill tray: Use only on levels 1, 2 and 3.
Grill tray as a splatter guard: Slide the universal pan with the grill tray under the wire rack.
Baking stone HEZ327000 The baking stone is ideal if you want your home-made bread,
bread rolls or pizza to have a crispy base. The baking stone must always be preheated to the recommended temperature.
Enamel baking tray HEZ331003 For cakes and biscuits.
Slide the baking tray into the oven with the sloping edge facing the oven door.
Enamel baking tray with non-stick coating HEZ331011 Cakes and biscuits can be removed from the baking tray more
easily. Slide the baking tray into the oven with the sloping edge facing the oven door.
Universal pan HEZ332003 For moist cakes, pastries, frozen meals and large roasts. Can
also be used under the wire rack to catch fat and meat juices.
Slide the universal pan into the oven with the sloping edge fac­ing the oven door.
Universal pan with non-stick coating HEZ332011 Moist cakes, pastries, frozen meals and large roasts can be
removed more easily from the universal pan. Slide the univer­sal pan into the oven with the sloping edge facing the oven door.
Lid for the professional pan HEZ333001 The lid turns the professional pan into a professional roaster.
Professional pan with wire insert HEZ333003 Particularly suitable for preparing large quantities.
Wire rack HEZ334000 For ovenware, cake tins, roasts, grilled items and frozen meals.
Glass roasting dish HEZ915001 The glass roasting dish is suitable for stews and bakes that are
cooked in the oven. Particularly suitable for the automatic pro­grammes and automatic roasting.
Special accessories for HEZ number Use
Cleaning cloths for stainless-steel surfaces Product no. 311134 Reduces the build-up of dirt. Impregnated with a special oil for
perfect maintenance of your appliance's stainless-steel sur­faces.
Oven and grill cleaning gel Product no. 463582 For cleaning the cooking compartment. The gel is odourless.
Microfibre cloth with honeycomb structure Product no. 460770 Especially suitable for cleaning delicate surfaces, such
as glass, glass ceramic, stainless steel or aluminium. The microfibre cloth removes liquid and grease deposits in one go.
Door lock Product no. 612594 To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently. See the information sheet supplied with the door lock.
13
Making settings on the hob
Your hob is equipped with four gas burners. The following information explains how to light the gas burners and set the size of flame.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and cup (2) with water and washing­up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5). Ensure that the igniter (3) and flame safety pin (4) are not damaged.
The nozzle (6) must be dry and clean. Always position the burner cap exactly over the burner cup.
Igniting the gas burners
Always position the burner cap exactly onto the burner cup. The openings in the burner cup must remain unobstructed at all times. All parts must be dry.
1. Open the upper cooker cover. The upper cover must remain
open whilst the cooker is in operation.
2. Turn the control for the required hotplate anti-clockwise to the
ignition position
8. This starts the ignition process.
3. Press and hold the hotplate control for 1-3 seconds. Gas
begins to flow out and the gas burner ignites.
The safety pilot is activated. If the gas flame goes out, the gas supply is automatically cut off by the safety pilot.
4. Set the required flame size. Between the Off þ setting and the
setting, the flame is not stable. Therefore, always choose a
setting between the large flame
and small flame ˜.
5. If the flame goes out again, repeat the process from step 2.
6. To finish cooking, turn the hotplate control clockwise to the
Off
þ position.
The hotplate control should not be turned to the ignition position for longer than 15 seconds. If the burner does not light within 15 seconds, wait at least one minute. Then repeat the ignition process.
: Caution!
If, after switching the cooker off, you turn the burner control while the cooker is still hot, gas will escape. If you do not turn the hotplate control to the ignition position
8 within 60
seconds, the gas supply will be cut off.
The gas burner does not ignite
If there is a power cut or if the ignition plugs are damp, you can light the gas burners with a gas lighter or a match.
Table – Cooking
Select the right pan size for each hotplate. The diameter of the pot or pan base should be the same as that of the hotplate.
Cooking times may vary depending on the type of food, its weight and quality. You yourself can best judge the optimal cooking time.
Use as little water as possible when cooking, so that the food retains its vitamins and minerals. Select short cooking times so that the vegetables remain firm and full of nutrients.
 
Example Food Hotplate Heat setting
Melting Chocolate, butter, margarine Economy burner Small flame
Warming Stock, tinned vegetables Standard burner
Electric hotplate**
Small flame
1-2
Heating and keeping warm
Soups Economy burner
Electric hotplate**
Small flame
1-2
Steaming* Fish Standard burner
Electric hotplate**
Between large and small flame
3-4
Braising* Potatoes and other vegetables,
meat
Standard burner
Electric hotplate**
Between large and small flame
3-4
Boiling* Rice, vegetables, meat dishes
(with sauces)
Standard burner
Electric hotplate**
High flame
5-6
Roasting Pancakes, potatoes, schnitzel,
fish fingers
High-output burner**
Wok burner**
Between large and small flame
* If you are using a pan with a lid, turn the flame down as soon as it reaches boiling point.
** Optional. Available for some appliances, depending on the appliance model (for frying on the wok burner, we recommend that
you use a wok)
14
Suitable pans
Precautions for use
The following advice is intended to help you save energy and prevent pan damage:
Programming the oven
There are different ways to programme the oven. Programming the type of heating, temperature or grill power. The oven can be programmed with the cooking time (duration) and the end time for each dish. For more information, see the chapter Setting the time functions.
Note: We recommend preheating the oven before inserting the food in order to avoid condensation on the oven glass.
Type of heating and temperature
Example in the picture: Top/bottom heating at 190 °C %.
1. Use the function selector to set the type of heating.
Burner/electric hot­plate
Minimum pan diameter
Maximum pan diam­eter
Electric hotplate* 14.5 cm 14.5 cm
Wok burner** 3.6 kW 24 cm 28 cm
High output burner 3kW
24 cm 28 cm
Standard burner 1.7 kW18 cm 24 cm
Economy burner 1 kW 12 cm 18 cm
* Option (for models with an electric hotplate)
** Option (for models with a wok burner)
Use pans which are the right size for each burner.
Do not use small pans on large burners. The flame must not touch the sides of the pan.
Do not use damaged pans, which do not sit evenly on the hob. Pans may tip over.
Only use pans with a thick, flat base.
Do not cook without using a lid and make sure the lid is properly fitted. This wastes energy.
Always place the ovenware centrally over the burner. Otherwise, there is a risk that it may tip over.
Place the pans on the pan supports, never directly on the burner.
Make sure that the pan supports and burner caps are correctly positioned before using the appliance.
Pans should be placed on the hob carefully.
Do not strike the hob and do not place excessive weight on it.
Never use two burners or heat sources to heat one single pan.
Do not use grill pans, earthenware casserole dishes, etc. for a long period of time on maximum power.
15
2. Set the temperature or grill setting using the temperature
selector.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be changed at any time using their respective selectors.
Rapid heating
With the rapid heating function, the oven reaches the programmed temperature very quickly.
Rapid heating must be used for temperatures of more than 100 ºC. The following types of heating are appropriate:
3D hot air <
Top and bottom heating %
To ensure uniform cooking, the food must not be put into the oven until rapid heating has been completed.
1. Select the temperature and type of heating required.
2. Briefly press the c button.
The display panel shows the
c symbol. The oven will begin to
heat up.
End of rapid heating
A beep will sound. The
c symbol disappears from the display
panel. Put the food in the oven.
Cancelling rapid heating
Press the
c button. The c symbol disappears from the
display panel.
Setting the time functions
This oven has various time functions. The 0 sensor activates the menu and moves through the different functions. The time symbols remain lit up while settings are programmed. The square brackets [ ] indicate the time function selected. You can modify an already programmed time function directly with the sensors
@ or A, provided the time symbol is situated between
square brackets [ ].
Timer
The timer works independently of the oven. The timer has its own beep. This can be used to distinguish whether the time set for the timer or the automatic oven shut-off have finished (cooking time).
1. Press the button once 0.
The time symbols light up on the display panel, the square brackets are next to
U.
2. Set the timer using the @ or A buttons.
Value suggested for the
@ button = 10 minutes.
Value suggested for the
A button = 5 minutes.
The programmed time is shown after a few seconds. The time set for the timer starts to count down. The symbol [
U] lights up
on the display panel and the timer's progress is shown. The other time symbols switch off.
The time set for the timer has elapsed
A beep will sound. The display panel will show
‹‹:‹‹. Switch
off the timer using the
0 button.
Changing the time on the timer.
Change the time set for the timer using the
@ or A buttons. The
new time is shown after a few seconds.
Cancelling the timer
Resetting the timer to
‹‹:‹‹ with the button A. The new time
is shown after a few seconds. The timer switches off.
Viewing the time settings
If several time functions are programmed, the corresponding symbols light up on the display panel. The symbol for the time function in the foreground is in brackets.
To view the timer
U, the cooking time r, the end time p or
the actual time
0, press the 0 sensor repeatedly until the
brackets are around the required symbol. The corresponding value will be shown for a few seconds on the display panel.
Cooking time
The oven allows you to set the cooking time for each type of food. The oven switches off automatically when the cooking time has finished. This avoids interrupting other tasks to switch the oven off or exceeding the cooking time by mistake.
Example in the picture: cooking time: 45 minutes.
1. Select the type of heating using the function control knob.
2. Select the temperature or grill power level with the
temperature control knob.
3. Press the 0 button twice.
The display panel will show
‹‹:‹‹. The time symbols light
up, the brackets are located next to
r.
16
4. Set the cooking time with the @ or A buttons.
Value suggested for the
@ button = 30 minutes.
Value suggested for the
A button = 10 minutes.
The oven will switch on after a few seconds. The display panel shows the cooking time elapsed and the [r] symbol is displayed. The other time symbols switch off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display panel will show
‹‹:‹‹. Press the 0 button. Programme a new
cooking time with the
@ or A buttons. Or press the 0 button
twice and turn the function control knob to the zero setting. The oven is off.
Changing the cooking time
Change the cooking time with the
@ or A buttons. The new
time is shown after a few seconds. If the timer has been programmed, first press the
0 button.
Cancelling the cooking time
Reset the cooking time to
‹‹:‹‹ with the button A. The new
time is shown after a few seconds. The time has been cancelled. If the timer has been programmed, first press the
0
button.
Viewing the time settings
If several time functions are programmed, the corresponding symbols light up on the display panel. The symbol for the time function in the foreground is in brackets.
To view the timer
U, the cooking time r, the end time p or
the actual time
0, press the 0 sensor repeatedly until the
brackets are around the required symbol. The corresponding value will be shown for a few seconds on the display panel.
End time
The oven allows you to set the time when you want the food ready. The oven switches on automatically and switches off at the set time. E.g. the food may be placed in the oven in the morning and the oven set so that it is ready at midday.
Please ensure that the food will not go off if it is in the oven for too long.
Example in the picture: It is now 10:30 AM, the cooking time is 45 minutes and the oven should switch off at 12:30 PM.
1. Set the function control knob.
2. Set the temperature control knob.
3. Press the 0 button twice.
4. Set the cooking time with the @ or Abuttons.
5. Press the 0 button.
The brackets are shown next to
p. The time the dish will be
ready is displayed.
6. Delay the end time using the buttons @ or A.
The oven displays the programmed time after a few seconds and is set to standby. The time when the dish will be ready is displayed and the end time
p symbol will be shown in
brackets. The symbols
U and 0 turn off. When the oven is
turned on, cooking time progress is shown and the symbol
r
appears in brackets. The symbol
p is turned off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display panel will show
‹‹:‹‹. Press the 0 button. Programme a new
cooking time with the
@ or A buttons. Or press the 0 button
twice and turn the function control knob to the zero setting. The oven is off.
Changing the end time
Change the end time using the buttons
@ or A. The new time is
shown after a few seconds. If the timer has been programmed, first press the
0button twice. Do not change the end time if the
cooking time has already started to count down. The final result may not be the same.
Cancelling the end time
Reset the end time to the current time by pressing
A. The new
time is shown after a few seconds. The oven switches on. If the timer has been programmed, first press the
0 button twice.
Viewing the time settings
If several time functions are programmed, the corresponding symbols light up on the display panel. The symbol for the time function in the foreground is in brackets.
To view the timer
U, the cooking time r, the end time p or
the actual time
0, press the 0 sensor repeatedly until the
brackets are around the required symbol. The corresponding value will be shown for a few seconds on the display panel.
17
Time
Once the oven has been connected or after a power cut, a flashing
0 symbol and four zeros are shown on the display
panel. Set the time.
1. Press the 0 button.
The display panel displays the time
‚ƒ.‹‹.
2. Set the time with the buttons @ or A.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
1. Press the 0 button four times.
The time symbols light up on the display panel, the brackets are located next to
0.
2. Adjust the time with the buttons @ or A.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to the section Changing the basic settings.
Childproof lock
The oven includes a childproof lock to prevent it being turned on accidentally.
The oven does not react to any setting. The timer and time can be programmed when the childproof lock is on.
When the heating type and temperature or grill level are programmed, the childproof lock turns off the heating.
Activating the childproof lock No cooking time or end time should already be set.
Press the
D button for approximately four seconds.
The display panel shows the symbol
D. The childproof lock is
now activated.
Turning off the childproof lock Press the
D button for approximately four seconds.
The
D symbol in the display panel goes off. The childproof
lock is now deactivated.
Changing the basic settings
This oven has different basic settings. The settings can be adapted to the user's own needs.
No other time function can be programmed.
1. Press the 0 button for approximately 4 seconds.
The display panel will show the current basic setting for the time, e.g.
™‚ for the Selection ‚.
2. Set the basic setting using the buttons @ or A.
3. Confirm with the 0 button.
The display panel shows the following basic setting. Using the button
0 select the levels and using the buttons @ or A
make the setting.
4. Press the 0 button for approximately 4 seconds.
All basic settings have been applied.
The basic settings can be changed again at any time.
Basic settings
Selection
Selectionƒ
Selection
™‚
Time indicator always* only with
the button
0
-
™ƒ
Duration of signal after the cooking time or the time set on the timer has elapsed
approx. 10 sec
approx. 2 min.*
approx. 5 min
™„
Time until a setting is applied
approx. 2 sec
approx. 5 sec.*
approx. 10 sec.
* Default setting
18
Care and cleaning
With attentive care and cleaning, your hob and oven will retain its looks and remain in good working order for a long time. We will explain here how you should care for and clean them correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass, plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does not affect operation. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the wrong cleaning agent can be avoided by observing the following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
scouring pads,
abrasive cleaning agents such as oven cleaner or stain
remover,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Zone Cleaning agent
Stainless steel sur­faces*
(depending on appliance model)
Hot soapy water: Clean with a dish cloth and dry with a soft cloth. On stainless steel surfaces, always wipe parallel to the natural grain. Otherwise, you may scratch the surface. Remove patches and splashes of limes­cale, grease, starch and albumin (e.g. egg white) immediately. Corrosion can form under such patches and splashes.
Special care products suitable for hot stainless steel surfaces are available from our after-sales service and from specialist retailers. Apply a thin layer of care product with a soft cloth.
Enamel, painted, plastic and screen­printed surfaces*
(depending on appliance model)
Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaner or glass scrapers for cleaning.
Control panel Hot soapy water:
Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaner or glass scrapers for cleaning.
* Optional (available for some appliances, depending on the
appliance model)
Upper glass cover*
(depending on appliance model)
Glass cleaner: Clean with a soft cloth. You can remove the upper glass cover for cleaning. To find out how to do this, please refer to the section Upper glass cover.
Rotary knobs Do not remove.
Hot soapy water: Clean with a dish cloth and dry with a soft cloth.
Hob surround Hot soapy water:
Do not clean with a glass scraper, lemon juice or vinegar.
Gas hob and pan supports*
(depending on appliance model)
Hot soapy water. Use very little water. Water must not be allowed to enter the appliance through the base of the burners. Clean off boiled-over liquids and spilt food immediately. You can remove the pan supports.
Cast iron pan supports*: Do not clean in the dishwasher.
Gas burners*
(depending on appliance model)
Remove the burner head and cap and clean with hot soapy water. Do not clean in the dishwasher. The gas outlet openings must remain unobstructed at all times. Ignition plugs: Small, soft brush. The gas burners only work properly when the ignition plugs are dry. Dry all parts thoroughly. Ensure that they are refitted correctly. The burner caps are coated in black enamel. The colour may change over time. This does not impair their perfor­mance.
Electric hotplate*
(depending on appliance model)
Abrasive materials or sponges: Briefly heat up the hotplate afterwards, so that it dries. Hotplates can rust over time if they remain wet. Apply care prod­uct to finish. Clean off boiled-over liquids and spilt food immediately.
Hotplate ring*
(depending on appliance model)
Remove yellow to blue iridescent discol­ouration from the hotplate ring with a steel care product. Do not use any abrasive materials that may scratch surfaces.
Ceramic hob*
(depending on appliance model)
Care: Protective/care products for ceramics Cleaning: Cleaning agents suitable for ceramics. Follow the cleaning instructions on the packaging.
:Glass scraper for stubborn dirt:
Remove the protective cover and clean using the blade only. Caution: The blade is very sharp. Risk of injury. Cover the blade again after cleaning. Replace damaged blades immediately.
Zone Cleaning agent
* Optional (available for some appliances, depending on the
appliance model)
19
Upper glass cover
Before opening the top cover, remove any spills with a cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the cover securely on both sides with both hands and pull it upwards.
If the cover hinges become loose, note the letters marked on them. The hinge with the letter R must be fitted on the right, and the hinge with the letter L must be fitted on the left.
After cleaning, re-assemble the top cover following the same procedure in reverse order.
Only close the top cover once the burners have cooled down.
Glass hob*
(depending on appliance model)
Care: Protective/care products for glass Cleaning: Cleaning agents for glass. Follow the cleaning instructions on the packaging.
:Glass scraper for stubborn dirt:
Remove the protective cover and clean using the blade only. Caution: The blade is very sharp. Risk of injury. Cover the blade again after cleaning. Replace damaged blades immediately.
Glass panel Glass cleaner:
Clean with a soft cloth. Do not use the glass scraper.
The door can be removed to facilitate cleaning. To find out how to do this, please refer to the section Removing and refitting the oven door.
Childproof lock*
(depending on appliance model)
Hot soapy water: Clean with a dish cloth.
If a childproof lock has been fitted to the oven door, it must be removed before cleaning.
If it is very dirty, the childproof lock will not work properly.
Seal Do not remove.
Hot soapy water: Clean with a dish cloth. Do not scour.
Cooking zone Hot soapy water or a vinegar solution:
Clean with a dish cloth.
For stubborn dirt, use a stainless steel scouring pad or oven cleaner. Only use when the cooking compartment is cold.
:Please use the self-cleaning function
to clean self-cleaning surfaces. To find out how to do this, please refer to the section Self-cleaning. Caution! Never use oven cleaner on self­cleaning surfaces.
Glass cover for the oven light
Hot soapy water: Clean with a dish cloth.
Shelf Hot soapy water:
Clean with a dish cloth or a brush.
You can remove the shelves for cleaning. To find out how to do this, please refer to the section Removing and refitting shelves.
Telescoping extension rails*
(depending on appliance model)
Hot soapy water: Clean with a dish cloth or a brush.
Do not remove the lubricant from the extension rails. It is best to clean them when they are pushed in. Do not soak, clean in the dishwasher, or clean in the oven as part of the self-cleaning pro­gramme. This may damage the shelves and they may no longer work properly as a result.
Zone Cleaning agent
* Optional (available for some appliances, depending on the
appliance model)
Accessories Hot soapy water:
Soak and then clean with a dish cloth or a brush.
Aluminium baking tray*:
(depending on appliance model)
Dry with a soft cloth. Do not clean in the dishwasher. Never use oven cleaner. To prevent scratches, never touch the metal surfaces with a knife or a similar sharp object. Harsh cleaning products, scratchy sponges and rough cleaning cloths are not suitable. Otherwise, you may scratch the surface.
Rotary spit* (depending on appliance model)
Hot soapy water: Clean with a dish cloth or a brush. Do not clean in the dishwasher.
Meat thermometer* (depending on appliance model)
Hot soapy water: Clean with a dish cloth or a brush. Do not clean in the dishwasher.
Plinth drawer*
(depending on appliance model)
Hot soapy water: Clean with a dish cloth.
Zone Cleaning agent
* Optional (available for some appliances, depending on the
appliance model)
20
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have cooled down.
Detaching the rails
1. Lift up the front of the rail
2. and unhook it (figure A).
3. Then pull the whole rail forward
4. and remove it (Fig. B).
Clean the rails with cleaning agent and a sponge. For stubborn deposits of dirt, use a brush.
Refitting the rails
1. First insert the rail into the rear socket, press it to the back
slightly (figure A),
2. and then hook it into the front socket (figure B).
The rails only fit on the right or the left side. Ensure that, as shown in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are above. The pull-out rails must pull out forwards.
Detaching and attaching the oven door
For cleaning purposes and to remove the door panels, you can detach the oven door.
The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to detach the oven door (Fig. B), the hinges are locked. They cannot snap shut.
: Risk of injury!
Whenever the hinges are not locked, they snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open.
Detaching the door
1. Open the oven door fully.
2. Fold up the two locking levers on the left and right (figure A).
3. Close the oven door as far as the limit stop. With both hands,
grip the door on the left and right-hand sides. Close the door a little further and pull it out (figure B).
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1. When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
2. The notch on the hinge must engage on both sides (figure B).
3. Fold back both locking levers (figure C). Close the oven
door.
: Risk of injury!
If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the aftersales service.


%

$

%
$
%$
%$
%
$
&
Loading...
+ 44 hidden pages