Bosch HEZ9YZ04UC, HEZ8YZ04UC Installation Manual

Side Panel Extension

Installation Manual
HEZ9YZ04UC, HEZ8YZ04UC

ö Installation Instructions

9 Safety Definitions ..................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ........................ 3
Before You Begin .......................................................... 4
Tools and Parts Needed ..................................................... 4
Installation Procedure ................................................... 5
STATEMENT OF LIMITED PRODUCT WARRANTY .... 6
What this Warranty Covers & Who it Applies to ............. 6
How Long the Warranty Lasts ............................................ 6
Repair/Replace as Your Exclusive Remedy ................... 6
Out of Warranty Product ..................................................... 6
Warranty Exclusions ............................................................ 6
Obtaining Warranty Service: ............................................... 7

Purpose

Thank you for purchasing a side panel extension kit accessory for your Bosch Industrial Style Range.
The purpose of this accessory panel is to minimize the gap between the side wall of the appliance and the back wall of the kitchen. This panel is most useful when a side of the appliance is not adjacent to kitchen cabinetry. This panel extension kit is universal and can be installed to either side of the appliance.
9 Safety Definitions

9 WARNING

This indicates that death or serious injuries may occur as a result of non-observance of this warning.

9 CAUTION

This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.

NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.

Note: This alerts you to important information and/or tips.

Safety Definitions
2

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY I NS TRU CTI ONSREAD AND SAVE THESE INSTRUCTIONS
Wear gloves to avoid cutting fingers on sharp edges during Installation.
Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.
3
Before You Begin
Before You Begin
Parts Included
Note: Can be affixed to either side of the appliance side
wall.
Tools and Parts Needed
Phillips head screwdriverFlat screwdriverGloves
4
Installation Procedure
1.
Remove any protective film.
2.

Remove all screws from the factory installed back panel of the appliance and retain them for Step 5.

Installati on Procedure
 
3.

Remove all screws from the back of the factory installed side panel on the side of the appliance where the extension kit will be affixed and retain the screws for Step 4.

4.
Place the side panel extension directly behind the back side of the factory installed side panel and align screw holes in both panels. Affix the side panel extension directly to the back of the factory installed side panel with the screws retained from step 3.
 
 
* Depending on the appliance specifications you need to remove the bracket by removing the screw on top.
* If you have removed the bracked in step 3, you need to affix the screw on the top. Do not use the bracket removed in step 3.
5.

Affix the factory installed back panel retained from Step 2.

 
5
Loading...
+ 11 hidden pages