Fire Alarm Systems | ET80 Fixed candela, Wall mount, Vandal resistant Speaker Strobes
ET80 Fixed candela, Wall mount,
Vandal resistant Speaker Strobes
www.boschsecurity.com
The Wheelock ET80 Fixed candela Speaker Strobes meet the critical needs of the life safety industry for voice and tone signaling. They have a vandal resistant die cast grill, a sealed back speaker, and a Lexan lens for extra protection.
The high efficiency speaker is designed for maximum output at a minimum wattage across a frequency range of 400 Hz to 4 kHz and covers both 25 V and 75 V audio systems with a series of wattage taps from 0.125 W to 8 W.
When used with the SM (single) or DSM (dual) Synchronization Modules, the strobe produces a synchronized strobe flash for compliance with ADA guidelines concerning photosensitive epilepsy. All strobe input is compatible with standard reverse polarity type supervision of circuit wiring by a fire alarm control panel (FACP).
Certifications and approvals
Cooper Wheelock, Inc. holds these Listings and Approvals:
u25 VRMS or 70 VRMS operation up to 8 W
uListed at 15 cd, but providing 75 cd on axis
uLow average current draw
uExtra protection and improved audibility through sealed back speaker construction and vandal resistant grill
uCompatible with SM and DSM Synchronization Modules
Region |
Certification |
|
|
|
|
USA |
UL |
UUMW: Speakers and Amplifiers for Fire |
|
|
Protective Signaling Systems (UL1480, |
|
|
UL1711, and UL2043) |
|
CSFM |
see our website |
|
|
|
Installation/configuration notes
Compatible Products
The following products are compatible with the ET80 Speaker Strobes:
Category |
Product ID |
Product Description |
Control Panels |
D70221 |
Conventional FACP |
|
D70242 |
Addressable FACP |
|
D7024 |
Conventional FACP |
|
D80241 |
Analog FACP |
|
D91241 |
Addressable FACP |
|
D10024A1 |
Analog FACP |
|
FPA-1000 |
Analog Addressable FACPs |
|
FPD-70242 |
Addressable FACP |
2 | ET80 Fixed candela, Wall mount, Vandal resistant Speaker Strobes
|
FPD-7024 |
Conventional FACP |
Modules |
SM 12/24 R |
Synchronization module (red) |
|
DSM 12/24 R |
Dual synchronization module |
|
|
(red) |
These speakers are compatible with Wheelock SAFEPATH4 Facility Communication Systems and Bosch Voice Evacuation Systems.
1 For synchronization, use the SM or DSM modules with these control panels. The synchronization module must be set for 24 V operation. When used, the D7022 must be set for 24 VDC operation.
2 When used with a D7039 Multiplex Expansion Module, the D7024 and FPD-7024 become addressable fire alarm control panels (FACPs).
Mounting
These speaker strobes mount on the indicated back boxes for the indicated applications:
|
Conduit |
Surface |
Flush Mounted |
|
Applications |
Mounted |
|
Four inch square* |
|
|
• |
SBB Back Box |
• |
• |
|
* Requires an SER extension ring.
Wiring
Notice
Do not use the strobe unit in coded or pulsed signaling circuits.
The input terminals accept wires with diameters between 18 AWG and 12 AWG (ISO 0.75 mm2 and 4 mm2).
Parts included
Quant. Component
1Speaker Strobe
1Hardware pack
1Literature pack
Technical specifications
Electrical
Strobe Current (RMS)
VDC: |
6 mA |
|
|
VFWR: |
9 mA |
|
|
Voltage (Input) |
|
|
|
Nominal: |
24 VDC |
|
|
Range: |
16 VDC or FWR to 33 VDC or FWR |
|
|
Environmental
Relative Humidity: |
|
|
Up to 85%, non condensing |
|
|
|
|
Temperature (Operating): |
|
+32°F to +120°F (0°C to +49°C) |
|
|
|
|
|
Mechanical |
|
|
|
|
|
|
|
Candela Rating: |
15 cd1 |
|
|
Dimensions: |
5.4375 in. square x 5.6875 in. deep2 |
||
|
(13.8 cm square x 14.4 cm deep2) |
||
Material: |
Molded plastic enclosure incorporating a Xenon |
||
|
flashtube and Lexan lens. |
||
|
|
|
|
1 Although this product is UL Listed at 15 cd, it provides 75 cd on axis.
2 When used in flush mount installations, the unit extends 3.4375 in. (8.7 cm) from the mounting surface.
Speaker dB at 10 ft (3 m)
1/8 W |
78 dB |
|
|
1/4 W |
81 dB |
|
|
1/2 W |
84 dB |
|
|
1 W |
87 dB |
|
|
2 W |
89 dB |
|
|
4 W |
93 dB |
|
|
8 W |
96 dB |
|
|
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Ordering information
ET80 241575W FR Vandal resistant Speaker Strobe (red)
Red, vandal resistant, 24 VDC device providing high audio output with clear audibility, dual voltage capability (25 VRMS or 70 VRMS), field selectable taps from 1/8 W to 8 W, and strobe listed at 15 cd, but providing 75 cd on axis
Order number ET80-241575W-FR
ET80 241575W FW Vandal resistant Speaker Strobe (white)
White, vandal resistant, 24 VDC device providing high audio output with clear audibility, dual voltage capability (25 VRMS or 70 VRMS), field selectable taps from 1/8 W to 8 W, and strobe listed at 15 cd, but providing 75 cd on axis
Order number ET80-241575W-FW