Intrusion Alarm Systems | EN1249 Billtrap Transmitter
EN1249 Billtrap Transmitter
www.boschsecurity.com
u Reliable communication through 900 MHz spread
spectrum technology with frequency hopping
u False alarm reduction through 56 bit communication
protocol and advanced signal processing
The EN1249 Billtrap Transmitter provides the best
range and reliability available today with the same
profile and ruggedness as a hardwire billtrap. It can be
used in any financial or retail environment.
System overview
Powered by Inovonics
The Inovonics EchoStream platform, powered by
Inovonics wireless mesh network technology, ensures
superior range, reliability, and scalability for
commercial applications. Using a wide range of
transmitters and repeaters, this proven technology
provides flexibility and performance to meet the most
stringent requirements. This exclusive protocol is
available only on Inovonics EchoStream products.
Wireless 900 MHz Band
The Inovonics EchoStream platform sends redundant
information on several multi-frequency channels within
the FCC Part 15 900 MHz band, providing superior
range and reliability. In comparison, systems that use a
single frequency technology can only send information
on one narrow band channel. Any interference within
the band can cause missed signals. With wireless
registration, it is easy to add this technology to any
application.
u Fully supervised with transmitter check‑in once per
minute
u Armed confirmation through 2 and 10 sec smart
baiting LED
u Slim profile
Functions
Supervision
The battery activity and radio link are supervised.
Monitoring helps ensure reliable operation and
safeguards against undetected loss of service due to
end user damage such as dropping the billtrap
repeatedly, exposing it to extreme temperature,
getting the billtrap wet, or other similar events.
Certifications and approvals
Inovonics Wireless Corporation holds the following approvals:
FCC Conforms to FCC Part 15 regulations
Installation/configuration notes
Compatibility Information
The EN1249 Billtrap Transmitter is compatible with
the following products:
Receivers
EN4016SK Survey Receiver
EN4200 Serial Receiver
EN4204R LED Receiver
2 | EN1249 Billtrap Transmitter
Repeater
EN5040‑T High‑power Repeater
Parts included
Quantity Component
1 Billtrap
1 Battery
Technical specifications
Electrical
Power: 3.0 VDC, 60 mA
Battery Replacement: Duracell DL123A, PanasonicCR123A, or
Battery Life (Average): 3 to 4 years. Typical battery life shown is
approved equivalent. Not all brands are
equivalent. Use the brands specified.
for supervised operation.
Mechanical
Dimensions: 15.7 cm x 8.9 cm x 2.3 cm
(6.2 in. x 3.5 in. x 0.9 in.)
Environmental
Relative Humidity: Up to 90%, non‑condensing
Temperature (Operating): 0°C to +60°C (-4°F to +140°F)
Transmission Characteristics
Frequency: 902 MHz to 928 MHz
Trademarks
Trademark names are used throughout this document.
In most cases, these designations are claimed as
trademarks or registered trademarks in one or more
countries by their respective owners. Rather than
placing a trademark symbol in every occurrence of a
trademark name, Bosch Security Systems, Inc. uses
the names only in an editorial fashion and to the
benefit of the trademark owner with no intention of
infringing the trademark.
Duracell is a registered trademark of the Gillette Company, USA, in the
United States and/or other countries.
Inovonics is a trademark of Inovonics Wireless Corporation.
Panasonic is a registered trademark of Matsushita Electric Indus-trial
Co., Ltd.
Ordering information
EN1249 Billtrap Transmitter
Provides the range and reliability of hardwire billtraps.
Order number EN1249