Intrusion Alarm Systems | EN1235D Belt Clip Pendant (Double button)
EN1235D Belt Clip Pendant (Double button)
www.boschsecurity.com
u Double button activation
u State-of-the-art radio
u Supervised radio link
u Includes belt clip and battery
u Exclusive wireless protocol ensures maximum performance and reliability
The EN1235D Belt Clip Pendant Transmitter provides a two button activation, respectively. The two button design reduces accidental activation. One light emitting diode (LED) flashes with all transmissions, including supervision, to clearly show users when the unit is operating. The pendant includes a belt clip and a battery. The pendant can also be mounted for fixed position signaling, adapting to a wide range of installations.
With the superior range and reliability offered by the Inovonics EchoStream platform, there is virtually no limit to the applications that can benefit from this pendant. The Inovonics EchoStream platform uses diversity reception and advanced signal processing to reduce dead spots in transmission areas.
System overview
Powered by Inovonics
The Inovonics EchoStream platform, powered by Inovonics wireless mesh network technology, ensures superior range, reliability, and scalability for commercial applications. Using a wide range of transmitters and repeaters, this proven technology
provides flexibility and performance to meet the most stringent requirements. This exclusive protocol is available only on Inovonics EchoStream products.
Wireless 900 MHz Band
The Inovonics EchoStream platform sends redundant information on several multi-frequency channels within the FCC Part 15 900 MHz band, providing superior range and reliability. In comparison, systems that use a single frequency technology can only send information on one narrow band channel. Any interference within the band can cause missed signals. With wireless registration, it is easy to add this technology to any application.
Functions
Design
Users can wear the pendant or installers can mount the pendant in a fixed location.
Supervision
The battery activity and radio link are supervised. Monitoring helps ensure reliable operation and safeguards against undetected loss of service due to
2 | EN1235D Belt Clip Pendant (Double button)
end user damage such as dropping the pendant repeatedly, exposing it to extreme temperature, getting the pendant wet, or other similar events.
Certifications and approvals
Inovonics Wireless Corporation holds the following approvals:
FCC |
Conforms to FCC Part 15 regulations |
Installation/configuration notes
The EN1235D Belt Clip Pendant Transmitter is compatible with the following products:
Receivers
EN4016SK |
Survey Receiver |
|
|
EN4200 |
Serial Receiver |
|
|
EN4204R |
LED Receiver |
|
|
Repeater |
|
|
|
EN5040 T |
High power Repeater |
|
|
Parts included
Quantity Component
1Transmitter
1Belt clip
13.0 V battery
Technical specifications
Electrical
Power: |
3.0 V, 0.5 Ah |
|
|
Battery Replacement: |
Panasonic or Sanyo CR2, or approved |
|
equivalent. Not all brands are equivalent. |
|
Use a specified brand. |
|
|
Battery Life (Average): |
1 to 2 years. Typical battery life shown is |
|
for supervised operation. |
|
|
Mechanical |
|
|
|
Dimensions: |
5.6 cm x 4.8 cm x 1.8 cm |
|
(2.2 in. x 1.9 in. x 0.72 in.) |
|
|
Weight: |
40 g (1.4 oz) |
|
|
Environmental |
|
|
|
Relative Humidity: |
Up to 90%, non condensing |
|
|
Temperature (operating): |
0°C to +60°C (+32°F to 140°F) |
|
|
Transmission Characteristics |
|
|
|
Frequency: |
902 MHz to 928 MHz |
|
|
Trademarks
Trademark names are used throughout this document. In most cases, these designations are claimed as trademarks or registered trademarks in one or more countries by their respective owners. Rather than placing a trademark symbol in every occurrence of a trademark name, Bosch Security Systems, Inc. uses the names only in an editorial fashion and to the benefit of the trademark owner with no intention of infringing the trademark.
Inovonics is a trademark of Inovonics Wireless Corporation.
Panasonic is a registered trademark of Matsushita Electric Indus-trial Co., Ltd.
SANYO is a registered trademark of SANYO North America Corporation.
Ordering information
EN1235D Belt Clip Pendant (Double button)
Black, double-button pendant that includes belt clip.
Order number EN1235D