Bosch BSG 8100 Repair Instruction
R
E
P
A
I
R
R
R
E
P
A
I
R
E
P
A
I
R
Vacuum cleaner
1 SAFETY ......................................................... 2
1.1 Safety instructions ............................................................... 2
1.2 Repair instructions .............................................................. 2
2 INSTALLATION ............................................. 3
I
N
S
T
R
U
C
T
I
O
N
I
N
S
T
R
U
I
N
S
C
T
R
U
C
T
I
O
N
T
I
O
N
3 OPERATION .................................................. 4
Dow
4 COMPONENTS ............................................. 5
5 FUNCTIONS .................................................. 6
A
6 REPAIR .......................................................... 7
6.1 Tools ..................................................................................... 7
6.2 Before disassembly ............................................................. 7
6.3 Disassembly ......................................................................... 7
6.4 Assembly .............................................................................. 9
6.5 After assembly ..................................................................... 9
7 FAULT DIAGNOSTICS ............................... 10
7.1 General troubleshooting.................................................... 10
7.2 Faulty resistor on motor electronics ................................ 10
7.3 Overheating protection is missing ................................... 11
7.4 Sealing of dustbox is not in correct position .................. 11
8 TECHNICAL SPECIFICATIONS ................. 12
118_58300000145664_ARA_EN_D.doc – 20.09.13 Page 1 of 12
1 SAFETY
Risk of injury!
Connect and operate the appliance only in
accordance with the specifications on the rating
Repairs may be carried out by a qualified electrician
The user may be put at considerable risk and injured
Electric shock may occur if live components are
en the
Before commencing repairs, ALWAYS disconnect
Components become hot during operation. Before
commencing repairs, leave the appliance to cool
iance is
operated
The protective conductor connection must not
exceed the standardised values! This is essential for
When repairs are complete, perform a test in
ccordance with VDE 0701/0702 or the
DANGER
NEVER attempt repairs by randomly replacing
proceed systematically and comply with
As a rule, electronic boards are not repaired but
are completely replaced with original spare parts.
a performance
CAUTION
1.2 Repair instructions
1.1 Safety instructions
►
plate.
►
only!
►
by improper repairs!
►
touched inside the appliance!
► Do not touch components in the appliance. Ev
modules can be live!
►
the appliance from the pow er supply!
►
down.
► If tests have to be conducted while the appl
live, ALWAYS use a residual-currentcircuit-breaker!
►
personal safety and appli anc e funct ion!
►
a
corresponding national regulations!
► Comply with ESD information!
►
D
components!
► ALWAYS
the technical documentation for the appliance!
►
Exceptions are documented separately.
► Following each repair, conduct
test.
118_58300000145664_ARA_EN_D.doc – 20.09.13 Seite 2 von 12
2 INSTALLATION
118_58300000145664_ARA_EN_D.doc – 20.09.13 Seite 3 von 12
3 OPERATION
118_58300000145664_ARA_EN_D.doc – 20.09.13 Seite 4 von 12
Loading...