Page 1
Rack Mount Bracket
LCD DISPLAY MOUNT MODEL
INSTALLATION MANUAL
Page 2
Step1
(8)M4*8 phillips screw
Secure your flat panel to Rack Mount Bracket from the back side using The VESA 75mm or
100mm mounting points and (4),(8) M4*8 phillips screw.
(figure 1,2,3)
<Dual>
<Single>
(4)M4*8 phillips screw
<Non Flat>
(2)mount guide bracket (4)4*8 phillips screw
(4)M4*8 phillips screw
Figure 1
Figure 2
Figure 3
RACK MOUNT BRACKET ASSEMBLY
Page 3
Step2
Min:15
Max:152
55~75
55~75
75~100
141~161
271~291
Units: mm
<Mount Spec>
Take the two(2) side brackets and adjust the location of side bracket before secure
them to the Rack Mount Bracket mount using the (4) M4x8 Phillips screws.
The front side of side bracket is recommended flat with a monitor. (figure 5,6)
(2)Rack bracket
(4)M4*8 phillips screw
Figure 4
Figure 5
RACK MOUNT BRACKET ASSEMBLY
Page 4
(2)Rack bracket
(4)M4*8 phillips screw
<Mount Spec>
It can be selected the model easily using the below picture. (figure 7)
indication Model Name
8C 8RTC,8RTF
5V 15RTV,15RTA, UML-150-90
7V,5C 17RTV,17RTA,15RTC
UML-170-90
9V 19RTV, 19RTA, UML-190-90
7C 17RTC, UML-172-90
9C 19RTC, UML-192-90
Figure 6
Figure 7
RACK MOUNT BRACKET ASSEMBLY
Page 5
Step3
Secure the fully assembled rack mount to your cabinet using the four (4) M4*8
phillips screw. (figure 8)
(4)M4*8 phillips screw
Figure 8
RACK MOUNT BRACKET ASSEMBLY
Page 6
- Listing of Contents -
RACK MOUNT BRACKET ASSEMBLY
1. Rack Mount Bracket
4. M4*8 Phillips Screw - 10pcs
5. 4*8 Phillips Screw - 5pcs
2. Mount Guide Bracket – 2pcs
3. User Manual
<Rack Mount Bracket> <Mount Guide Bracket>
<M4*8 Phillips Screw>
<4*8 Phillips Screw>
<User Manual>
Page 7
RACK MOUNT BRACKET ASSEMBLY
- Specifications -
▶ Support to Monitor
Dual 8”, 8.4” and single 8” ~ 19” LCD Monitor
▶ Tilting Angle
- 35 ~ 35 degrees
▶ Packing Dimensions (W x D x H)
515mm x 220mm x 90mm
▶Weight
Net Weight : 1.4kg
Gross Weight : 2.0kg
▶ Depth adjustable
37mm to 80mm (1.45” to 3.14”)
▶ VESA mount support
75x75mm or 100x100mm
▶ Max supporting weight
20.94 lbs (9.5kg)
▶ ▶ NOTE
Technical specifications are subject to change without notice.
Loading...