9cm
Package Includes:
1x Turbo Speaker
1x Manual
1x USB Charging Cable
BTS-V01 Rechargeable Wireless Turbo Speaker User Manual
Specs:
Max output power: 4
Battery Capacity: 10,000mAh
Charging: 5V 500-1000MA
Bluetooth: 4.0 2.4GHz
3W
28cm
Read all safety and operation instructions before using
the Turbo Speaker
Important Safety Instructions
1. Do not expose the speaker to liquid, moisture or areas
:
of high humidity.
2.
damage the unit. Always unplug
and power off the unit before cleaning.
Do not expose the speaker to extremely high or low
3.
temperatures.
4. Keep the unit away from direct sunlight.
Do not attempt to open or modify the speaker in any way.
5.
6.
Store the speaker in a cool dry place.
7.
Thes peaker should be situated so that its location
or position does
not
interfere
its proper ventilation.
with
should not be si tuated on a bed, sofa, rug or similar
surface that may block ventilation openings.
8.
The Turbo Speaker contains a lithium ion battery.
Lithium ion batteries are flammable and can cause fire if
misused or defective.
9. Always dispose of the packaging and unit in accordance
with the
local regulations and in a responsible manner
:
Toggle the power button to turn the Turbo Speaker on or off.
The indicator
will light blue when the speaker is on.
light
:
1. The speaker needs to be paired to a Bluetooth device
before using.
It
2. Power on the speaker then press and hold the power
button on the speaker for a few seconds until the
speaker plays an audible
tone. The indicator light will
flash in blue letting you know that the speaker is ready
to be paired.
3.
pair to the “Turbo Sp
9cm
the indicator light will show a steady blue
once the pairing is complete.
Use a 3.5mm audio cable to connect the speaker to another
audio source.
1. Connect
the micro USB plug to the micro USB charging port
on the bottom of the Turbo Speaker..
light
2. Connect the standard USB plug end of the cable to a
power USB port
on a computer
or other USB charging
device.
3. An indicator light of
Once fully
red means the unit
the indicator light will turn off. The
charged,
is charging
.
charging process can take 2 to 3 hours to charge the
battery.
90 Day Limited Hardware Warranty
Boostnatics hereby warrants to the customer of record that this
product is in good-working condition and free from defects in
material or workmanship under normal use for a duration of 90
days after the date of purchase. In the unlikely event that the
product proves to be defective, Boostnatics will repair or
replace the product free of charge .If replacem ent is required
and if Boostnatics then no onger carries th
then Boostnatics reserves the right to substitute the product
same product,
e
w
eplacement product of lik
ith a
the intended use.
of the mentioned
extend to any
any other
payment of incidental or consequential dam age resulting from
breach of the
If your product is not functioning or you have any concerns
please contact Boostnatics Support
www.boostnatics.com | info@boostnatics.com | 1-800-591-6037
Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG.
This warranty is limited to repair or replacement
product only, is non-transferable and does not
product damaged by misuse, natural disasters or
not cover or provide for the reimbursement or
limited warranty described above.
© 2016 Boostnatics, LLC. All rights reserved.
e
quality and size, suitable for
before returning the product.
.
FCC Certification Requirements
Caution: Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Loading...