
Winglock 900
Maintenance
Caution! Do not use water near the drive unit and controls.
Warning! Switch the power supply off before carrying out any maintenance
and / or other work on the Winglock.
Weekly: Clean the stainless steel surfaces with a damp cloth.
Monthly: Clean the stainless steel surfaces with a damp cloth and soft soap.
Annually: The Winglock needs to be serviced at least once a year. This service and any repairs
should be performed by Boon Edam B.V. or your dealer.
I n s t r u c t i o n C a r d
W i n g l o c k 9 0 0
Winglock 900
Safety- and Operating instructions
Maintenance
Dealer:
Explanation of the symbols
Door panel locked in
closed position
Door panel will open or close
Door panel opens or closes
manually / Failsafe
No power supply
Power supply
Acoustic pulse signal*
Authorisation to allow a person
in or out*
(Button pressed, door panel
stays open)*
ALARM
3 s
Blocked in and out*
Alarm with acoustic signal*
Alarm*
Door panel is locked
Door panel is unlocked
Action after 3 seconds
(adjustable from 2 -10 seconds)
Option
For further information, consult the operating manual.
Boon Edam B.V. Postbox 40, 1135 ZG Edam Holland.
Check the emergency- and safety devices and the general operation
of the Winglock daily!
Version : 2014/01/22
Issue : WL900-INS-UK

Winglock 900
Safety- and Operating instructions
A Safety device
1 Failsafe
2 Fire alarm
B Control panel*
1 Pulse in
2 Pulse out
3 s
4 Open (continuous pressed)
5 Alarm
ALARM
C Authorisation
1 Card reader on pedestal*
3 s
3 Block detection
Version : 2014/01/22
Issue : WL900-INS-UK
ALARM
3 s
3 Locked
ALARM