Boomba Racing ST Ford Focus Rear Motor Mount User Manual

FORD FOCUS ST MOTOR MOUNTS

INSTALLATION MANUAL

TOOLS REQUIRED

Set of car stands
M15 socket wrench
M15 box wrench

Remove plastic vacuum hose from rubber

When lifting the car

adaptor on the top of valve cover (leave
rubber adaptor in place).

always use stands to

1

1

secure the car.

Remove the exhaust support bracket rear
nut.

5

T30 Torx bit
M13 socket wrench
M13 box wrench

Remove the splash pan bottom lip.

2

Remove the exhaust support bracket.

6

MATERIALS REQUIRED

None

Remove the splash pan.

3

Remove the motor mount bolts.

7

Remove the exhaust support bracket
screws.

4

Remove the wishbone mount bolts.

8

Remove the wishbone rear bolt.

9

Remove the factory torque arm.

10

Install the Boomba motor mount.

11

Install the Boomba wishbone mount.
Hand tighten mounting bolts.

12

Remove plastic vacuum hose from rubber

Install and tighten the wishbone rear bolt.
adaptor on the top of valve cover (leave

Tighten the remaining wishbone bolts.
rubber adaptor in place).

1

13

Install the splash pan bottom lip.

17

Tighten the motor mount bolts.

14

Install the exhaust support bracket.

15

Install the splash pan.

16