BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
OPTIMUM 700, Gas cooking unit, solid plates on oven
P075506: Gas oven P075507: Electric oven
GENERALITIES
* All stainless steel one-piece upper structure (20/10 thick top + 15/10 thick laser continuously welded added side panels) enabling a flush
assembly.
* All stainless steel construction designed to avoid any infiltration.
* Unfailing sturdy equipment for direct wall fixation.
* Crown front with 20/10 thick ends enabling almost flush assembly.
* Grouped and built-in controls protected from shocks and spillage. Removable fascia with maintenance position.
* Appliance delivered with 4 black reinforced fibre polyamide legs fitted with screw jacks.
SOLID PLATE
* Solid cast-iron removable 10 mm thick plate, dimension 550 x 400, fitted with 2 removable inserts.
* Insulated stainless steel combustion chamber forming a collecting receiver.
* Heating ensured by a circular brass burner guaranteeing a quick temperature rise of the inserts.
* Serially mounted safety thermocouple and pilot flame.
* Gas tap control.
OVEN
* The oven capacity to GN 2/1 (530 x 650 mm) sizes is equipped with a steel sole, removable side racks and is insulated by rot proof rock wool.
* Sturdy door with built-in hinges balanced by return springs and fitted with an insulating handle. Sealing ensured by heat-resistant silicone gasket.
* The oven is equipped with a GN 2/1 nickel-plated grid and a special plate of the GN 2/1 type for pastry.
* Gas oven:
* Electric oven:
- Heating is ensured by a micro perforated stainless steel burner.
- Power control by a gas tap and temperature by an adjustable thermostat from 100 to 270°C, safety thermocouple, pilot flame and serially
mounted electric ignition.
- Control ensured by a 4-position switch: off/on, top part, sole (bottom part), top+bottom, thermostat 50/300°C and operation indicator.
- Safety thermostat at 400°C.
OPTIONS
* Electric ignition for solid plate module through a front push-button.
* A 200 mm high movable base, equipped with 4 stainless steel castors two of which with brake, replacing the fixed base (see the specific technical
sheets).
* Stands for masonery basement (see specific technical documentations).
* One-piece wall or central 30/10 thick top.
ACCESSORY
* Wall hanging kit.
STANDARDS
: Compliance with standards
EN 203-1: European standard relating to the safety of gas appliances.
EN 203-2-9 et EN 203-2-2: European standard relating to the rational use of energy.
EN 60335-2-36: European standard relating to the safety of gas appliances.
(French standards: Classification index C 73-836).
IP 25 and IK 9: Protection indexes. XP U 60-010: Hygiene.
P075506 P075507
GAS connection
ELECTRIC connection
(Foresee a cable with 1.5 m free length)
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
MODEL
DIMENSIONS (mm)
B-B706.CF800.FG B-B706.CF800.FE
Height 959 959
Width 800 800
Depth 730 730
Solid plate 550 x 800 550 x 800
PACKAGING (mm)
Height 1150 1150
Width 900 900
Depth 830 830
WEIGHT (KG)
COMPOSITION OF THE TOP
165 155
Solid plate 6.5 Kw 2 2
COMPOSITION OF THE BOTTOM PART
Gas oven 7.2 kW 1 Electric oven 5.1 kW - 1
GAS
Power (kW) 20.2 13
G31 Propane 37/50 mbar (kg/h) 1.57 1.01
G30 Butane 50 mbar (kg/h) 1.59 1.03
G20 Natural gas 20 mbar (m3/h) 2.14 1.38
G25 Natural gas 20/25 mbar (m3/h) 2.43 1.56
Power (kW) 17.4 10.2
G30 Butane 28/30 mbar (kg/h) 1.37 0.80
ELECTRICITY (Single-phase or three-phase 230V+T or 400V+N+T)
Power (kW) 230V a.c. 0.1 230V 3a.c. - 5.1
400V 3Na.c. - 5.1
Max. intensity (A) 230V a.c. - 230V 3a.c. - 19.5
400V 3Na.c. - 11.2
Optional electric ignition 0.1 0.1
GAS CONNECTION
Gas outlet at 180 mm above the floor (thread 15/21 mm)
As standard, the appliances are equipped with G 20/20 mbar (and G 25/25 mbar) or another gas on request
ELECTRIC CONNECTION
Electric outlet at 615 mm above the floor
This document is not contractual; Edition 12/2008 – 3BE0390FT
Loading...